CherryUSB is a tiny, beautiful and portable USB host and device stack for embedded system with USB IP

Expose standard or fully custom USB peripherals (gadgets) through a USB device controller (UDC) on Linux using Rust.

Library and interface for the LT series of Fender Amplifiers

USB to CAN adapter firmware

CANbardo USB to CAN adapter board

The most configurable USB device library

Emulator of MSX Keyboard subsystem, to develop, make performance tests and measurements on PS/2 to MSX Adatpter. Now implemented the console as a USB device, plus a USB<=>Serial converter.

Efficient USB device stack designed for embedded systems. Includes support for Audio, CDC-ACM, CDC-EEM, HID, MSC, and Vendor classes.

🔥🔥串口工具,通知工具，网络监听，多文件断点下载,xls，xlsx操作,APK安装/系统应用安装，文件处理,crash控制，音视频播放,usb设备检测，adb工具等...

Use a Raspberry Pi Pico board to process USB MIDI data between a USB MIDI Keyboard or other device and a PC or other USB MIDI Host

An IOT server written in rust for reading weighing data on scales via serial port.

🔌💡🔋 Electronics | Quickstarts 🔌💡🔋

A user-space driver for controlling Matrix Orbital character type displays. Supports both USB & serial models.

PowerShell executing Rubber Ducky USB Drive for acquiring network credentials

Full Speed USB DFU interface for FPGA and ASIC designs

Single/Multi-channel Full Speed USB interface for FPGA and ASIC designs

Implementation of the UsbBus trait of usb-device, which simulates a Bus as a USBIP Server. Useful for developing UsbClass traits and simulating devices.

Adapter for interconnecting musical instruments with MIDI interface to PC, via USB port.

An FPGA-based USB 1.1 (full-speed) device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB 1.1 (full-speed) device端控制器，可实现USB串口、USB摄像头、USB音频、U盘、USB键盘等设备，只需要3个FPGA普通IO，而不需要额外的接口芯片。