An FPGA-based USB 1.1 (full-speed) device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB 1.1 (full-speed) device端控制器，可实现USB串口、USB摄像头、USB音频、U盘、USB键盘等设备，只需要3个FPGA普通IO，而不需要额外的接口芯片。

Serial port communication in Java - FTDI D2XX, HID API, X/Y modem

USB to UART bridge for GD32VF103

CH330 breakout board

Candy size USB to UART bridge.

Control Arduino uno/mega/nano with Jetson nano linux command line

A simple USB to UART board designed with KiCad.

Raspberry Pi Pico UART-USB flasher for ESP

Streamline your CAN communication with our CANalyzer. Visualize, manage, and interact with CAN frames effortlessly in real-time.

All-in-one hardware solution for developing UAVCAN-compatible devices.

Cross-Platform Terminal

Power electronics | Objective pain registration device.

USB-to-UART module

PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs

Analog electronics | Infrared USB-UART transmitter with an amplitude signal modulation.

Embedded music-streaming system using ESP32 and TM4C MCUs, featuring USB-UART audio streaming, SPI DAC output, MOSFET-based analog filters, digital audio effects, real-time control via potentiometers, and a web-based interface.

CH347 USB to UART/I2C/SPI/GPIO driver package for OpenWrt

Sensor electronics | Trepanning simulator.

USB to UART Converter with CP2102 using KiCad

The module is universal converter from USB to UART with TTL/CMOS signal levels (both 3.3V and 5V). The converter uses FT232R chip from FTDI and is supported in all main operating systems.