Volume XXXI, 2022/2
All
- Mathematical modelling and numerical analysis of hydraulic system behaviour. A case study with application in HEC-RAS (Abstract)
- G. Dorin, C. Pricop, F. Stătescu, T.A. Hrăniciuc and D. Toma
- gabriela.dorin@student.tuiasi.ro
- DOI: 10.15660/AUOFMTE.2022-2.3642
- Comparative study of Li-ion 18650 cylindrical cell under pinch indentation (Abstract)
- I Szabo, A A Sirca, L Scurtu, L Kocsis, I N Hanches, F Mariașiu
- Ioan.Szabo@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2022-2.3643
- The influence of water injected on the reduction of NOx emissions in Diesel engine (Abstract)
- B C Benea
- b.benea@unitbv.ro
- DOI: 10.15660/AUOFMTE.2022-2.3644
- LabVIEW-Based Solar Air Heater Monitoring System (Abstract)
- V-C Ifrim, L-D Milici, P Atănăsoae, C Bejenar
- ifrimpv@gmail.com
- DOI: 10.15660/AUOFMTE.2022-2.3645
- Mathematical modeling in MATLAB of a photovoltaic panel (Abstract)
- T Pop, C Buzduga, R-D Pentiuc, V-C Ifrim, C Ungureanu
- teodor.pop@usm.ro
- DOI: 10.15660/AUOFMTE.2022-2.3646
- Key performance indicators used to measure the adherence to the iterative software delivery model and policies (Abstract)
- C Făgărășan, C Cristea, M Cristea, O Popa, C Mihele, A Pîslă
- office.cristif@gmail.com
- DOI: 10.15660/AUOFMTE.2022-2.3647
- Sustainability and Innovation Against the Techno-Corporate Gap: Evidence and Perspectives from the Italian-Romanian Partnership (Abstract)
- A Rangone
- adalberto.rangone@unich.it
- DOI: 10.15660/AUOFMTE.2022-2.3648
- Implementation of a global trailer tracking system using a microcontroller (Abstract)
- G A Niga, D Moldovanu, Andreea Anamaria Sîrca, H Cărăușan
- dan.moldovanu@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2022-2.3649
- Comparative study of Li-ion 21700 cylindrical cell under mechanical deformation (Abstract)
- I Szabo, A A Sirca, L Scurtu, L Kocsis, I N Hanches, F Mariașiu
- Ioan.Szabo@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2022-2.3650
- Optimization of aluminium die-casting process through predictive maintenance and parameter traceability systems (Abstract)
- Mizgan H., Ganea M.
- DOI: 10.15660/AUOFMTE.2022-2.3651
- Tensile testing of samples printed on Delta and Cartesian 3D printer (Abstract)
- M Ratiu, M A Prichici, D M Anton, D C Negrau
- mratiu@uoradea.ro
- DOI: 10.15660/AUOFMTE.2022-2.3652
- Comparative analysis of fuel cell and electric public for transport busses (Abstract)
- H. Cărăușan, B. O. Varga, D. Moldovanu, A. A. Sirca
- horatiu.carausan@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2022-2.3653
- Reducing economic risk by improving production (Abstract)
- Carmen Elena Stoenoiu
- Carmen.Stoenoiu@emd.utcluj.ro
- DOI: 10.15660/AUOFMTE.2022-2.3654
- Analysis and evaluation of the risk of non-competitiveness (Abstract)
- Carmen Elena Stoenoiu, Ciprian Cristea, Florica Mioara Serban
- Carmen.Stoenoiu@emd.utcluj.ro
- DOI: 10.15660/AUOFMTE.2022-2.3655
- The assessment of pedestrian’s head injury risk at the impact with the vehicle’s windshield (Abstract)
- B A Tolea, H Beles, A I Radu, F Scurt, G. Dragomir
- bogdan.tzolea@gmail.com
- DOI: 10.15660/AUOFMTE.2022-2.3656
- The effect of stacking sequence on flexural behavior of laminated hybrid epoxi biocomposite reinforced with glass and carbon fibers used in the bone plate and external fixation (Abstract)
- Alexandru BEJINARU MIHOC, Leonard Gabriel MITU, Ileana Constanța ROȘCA
- leonard.mitu@unitbv.ro
- DOI: 10.15660/AUOFMTE.2022-2.3657
- Employee competencies in line with Industry 4.0 (Abstract)
- Filip Praj, Martina Horváthová, Miloš Čambál
- filip.praj@stuba.sk
- DOI: 10.15660/AUOFMTE.2022-2.3658
- Design sensitivity analysis in the kinematics of the 4SS-axle guiding mechanism in Chebyshev configuration (Abstract)
- C Alexandru
- calex@unitbv.ro
- DOI: 10.15660/AUOFMTE.2022-2.3659
- Implementation of controlling in conditions of micro, small and medium industrial enterprises (Abstract)
- Viera Bestvinová
- Keanucat21@gmail.com
- DOI: 10.15660/AUOFMTE.2022-2.3660
- Modelling and simulation of a single-motor bi-axial sun tracking mechanism (Abstract)
- C Alexandru
- calex@unitbv.ro
- DOI: 10.15660/AUOFMTE.2022-2.3661
- Implementation of the 6S method in an industrial enterprise (Abstract)
- Katarína Lestyánszka Škůrková
- katarina.skurkova@stuba.sk
- DOI: 10.15660/AUOFMTE.2022-2.3662
- Optimisation of the measurement and evaluation process through an information system (Abstract)
- Vanessa Prajová, Peter Košťál
- vanessa.prajova@stuba.sk
- DOI: 10.15660/AUOFMTE.2022-2.3663
- Study on strain analysis as a function of cooling time for plastics commonly used in the automotive industry. (Abstract)
- S. Mihăilă, R. Pancu, M. B. Fazecas
- mihailasna@yahoo.com
- DOI: 10.15660/AUOFMTE.2022-2.3664
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License