Basements are usually on the ground level, or below it. As a result, there are multiple ways water can get into space. With relative air humidity monitoring, you can’t ensure the moisture levels of the structures, but you can receive a good indication of possible problems arising in the basement. If you take care of your basement’s environmental conditions before more serious problems occur, you could save a fortune.
Basement renovations should almost always be left at the hands of professionals. A wrongfully executed renovation can actually increase the problems you were trying to fix. There are multiple ways of trying to decrease the humidity in a basement. These include: heating the basement, improving drainage, changing the materials inside the basement, and building a bottom well.
With Ruuvi’s sensors, you can conveniently check the relative and absolute humidity levels in the basement. Air humidity in the basement fluctuates with outside air humidity. Hence, during summer heat, the relative humidity in a basement can reach levels between 80% and 90%. If these levels of humidity are constant in the basement, problems may arise in the long run.
Ruuvi’s sensors measure air humidity and temperature. Install the sensor on a counter in the basement, or alternatively, attach it to a wall. This is the best way to measure air humidity in the basement. Ruuvi’s sensors send measurement data directly to your phone via Bluetooth. In the Ruuvi application, you can examine long-term graphs and therefore be aware of the differences in air humidity overtime. In addition, you can create alerts to alert you when your pre-set threshold is exceeded.
Measure your basement’s conditions and you will receive valuable insights regarding what is going on in your basement!
Buy Wireless Combined Thermometer And Hygrometer to Cellar
Measure humidity and receive alerts from your cellar if the conditions are not ideal with wireless hygrometer
39,90€
Ruuvi is based in Finland. If you’re an EU consumer, VAT is included. If you’re a non-EU customer, you don't pay VAT. If you're an EU business, insert your VAT ID at checkout.
In stock
RuuviTag Sensor (4in1)
Customer Images
RuuviTag Sensor (4in1)
| Quantity | Unit Price(€) |
|---|---|
| 1 | 39,90 |
| 2 | 37,40 |
| 3-5 | 36,90 |
| 6-8 | 35,90 |
| 9-12 | 34,90 |
| 13-25 | 33,90 |
| 26-99 | 32,90 |
Are you looking for bigger quantities? Contact us for pricing.
⭐⭐⭐⭐⭐ Excellent sensors for RV monitoring and Victron VRM integration
I am extremely satisfied with my Ruuvi sensors.
I use several of them in different locations inside my motorhome: in the refrigerator, battery compartment, living area, kitchen area and other positions. Installation was very simple and the sensors have been working flawlessly from day one.
What impressed me most is the excellent integration with the Victron ecosystem. Through Victron VRM I can monitor all sensor data remotely 24/7, which is incredibly useful when living and travelling off-grid.
The accuracy is outstanding. The pressure readings of different sensors are almost identical, showing only minimal differences, which gives me great confidence in the quality of the measurements. Temperature and humidity readings have also proven to be very reliable.
I have even used the sensors to evaluate the performance of a portable compressor cooler. Thanks to the precise temperature logging, I was able to see that the cooler dropped from 20°C to 0°C in about 30 minutes and reached -20°C in less than an hour. Without Ruuvi sensors, such testing would have been much more difficult.
Battery life has been excellent, setup is easy, and the overall user experience is outstanding.
For anyone using Victron equipment, RVs, boats, off-grid systems, refrigerators, freezers or environmental monitoring, I can highly recommend Ruuvi sensors.
Hard to say anything bad. It does exactly what it promises.
Excellent!