Open Source Windows Networking Software - Page 15

Poweradmin is a web-based DNS administration tool for PowerDNS server. The interface has full support for most of the features of PowerDNS. It has full support for all zone types, for supermasters, full support for IPv6 and multi-language support.

tcp2com creates a bridge between a TCP socket and a serial port (COM). The program runs as a service under Windows NT. With tcp2com, you can telnet into any device you may have plugged into your COM port.

Enables tunneling of network connections through restrictive HTTP proxies. Features: Portmapping, SOCKS4, SOCKS5, web-based admin interface, possibility to use standalone server (perl) or hosted server (PHP), optional authorization from LDAP or MySQL

SNMP JManager is an open-source SNMP manager and has the following features: GUI, capable of import MIBs, support for SNMP v1/2c/3, support for IPv4 e IPv6, TRAPs SNMP v1/2c/3 and INFORMs v2c/3 generator and receiver, Get Table and MIB Walk.

simple arp MAC address scanner in c# with variable time gap(1sec to 30 sec) of arp requests over local network (wired and wireless) with fine delay of 50 millisecond. outputs in various formats currently works on ms windows with dot net framework install

NxShell is a modern, Electron-based terminal emulator that works on all major operating systems out there: Windows, macOS, and Linux.

Hyperic is application monitoring and performance management for virtual, physical, and cloud infrastructures. Auto-discover resources of 75+ technologies, including vSphere, and collect availability, performance, utilization, and throughput metrics.

JFtp is a graphical network browser. It supports various types of connections like FTP, SMB, SFTP, NFS, HTTP and local ones, has a nice Swing GUI, lots of features and can be started & (auto)updated using Java Web Start in any browser (link on homepage.)

TinyRadius is a small, fast and reliable Java Radius library capable of sending and receiving Radius packets as specified by RFC 2865/2866. TinyRadius is not a fully-fledged Radius server, but helps you to implement Radius services in your application.

A client for the MikroTik RouterOS API protocol, written in PHP. Easy, tested and documented. All feedback welcomed.

Open1X is an open source implementation of the IEEE 802.1X protocol. This project includes support for the supplicant, while other projects (e.g., FreeRADIUS) provide support for the authentication server.

Software that will keep track of your favorite internet game servers such as Quake 3 &4, Enemy Territory, Call of Duty, Counter Strike & Warsow etc. Supports filtering and country locations...

Automated network based hard disk drives / storage devices erasure is server based software which installs on a central server. Server is connected to network switches and several PXE boot enabled workstations are attached to the network. As soon as the workstation is powered on, it boots off the network via the server and begins wiping all the attached hard disk drives. Once all the hard drives are wiped, data related to each hard disk is stored in the central server’s database. Read WIKI Automated unattended network based data erasure wiping Comprehensive Reporting Web GUI reporting Generates certificate of data erasure Barcodes Labels Graphs Pie / Bar / Line Charts Hard Disks bad sectors & health reporting Hard Disk SMART Data collection Database Driven Distributed System Hard Disk Drives health reports Part Open Source * Friendly GUI Graphical User Interface Mass Hard Disk Drive Destruction Data Wiping HDD Data Eraser Storage Array Data Wipe

WinMTRCmd combines traceroute and ping functionality in a command-line network diagnostic tool. It is based on WinMTR, see https://sourceforge.net/projects/winmtr/.

Amoeba is a proxy that sits between your client and DB server(s) that can monitor, analyze or transform their communication. written in java. 1.load balancing 2、failover; 3、queries Route.projects:amoeba for mysql ,for mongodb,for aladdin

UMIT is the new nmap frontend, intended to be cross plataform, easy to use, fast and highly customizable. This project is developed with Python and PyGTK and run with minimal dependencies.

cdpr is used to decode a Cisco Disovery Protocol (CDP) packet, by default it will report the device ID, the IP Address (of the device), and the port number that the machine is connected to. Optionally it will decode the entire CDP packet.

phpLDAPadmin is a web-based LDAP administration tool for managing your LDAP server. With it you can browse your LDAP tree, view LDAP schema, perform searches, create, delete, copy and edit LDAP entries. You can even copy entries between servers.

ATTENTION!!! Wol is now hosted on our own servers at http://wol.aquilatech.com. Wake On LAN, WakeOnLAN, shutdown software for Windows. A powerful WOL, ping, shutdown, GUI application.

This is a NUT windows client for monitoring your ups hooked up to your favorite linux server. Now you don't need to vnc or ssh into the box to see how your ups is doing!

A bandwidth meter, for monitoring internet connection speeds and usage.

UltraVNC: Remote Desktop Support Software - Remote PC Access - Remote Desktop Connection Software - VNC/RFB Compatibility - Virtual Network Computing - Remote Frame Buffer - FileTransfer - Encryption Plugin - Text Chat - MS Authentication

Switchmap is a Perl program that creates HTML pages that show information about a set of Ethernet switches. It uses SNMP to gather data from the switches. Samples of Switchmap output can be found on the Project home page.

wipfw - IPv4 packet filter and traffic shaper for Windows based on IPFW (FreeBSD firewall).

Toolbox netwox helps to find and solve network problems. Netwox contains 223 tools.