Search Results for "c--"

sispmctl is an application enabling the use of the GEMBIRD SiS-PM and mSiS(sispm) USB-controlled power-outlet device under Linux. Note that the device is also sold under different Names, i.e. as "IntelliPlug" in Germany.

O nome do projeto no sourceforge.net era apcupsd-brazil e mudou para apcctrl. Caso seu nobreak não seja da APC Brasil (como os modelos importados) utilize o projeto http://www.apcupsd.org/ Esse projeto não é oficial da APC Brasil. É uma solução independente e de código aberto. Não deixe de ler a wiki do projeto. É fundamental para compilar e ter acesso a outras orientações. Modelos suportados: 1) BACK-UPS BR 1200VA (BZ1200BI-BR e BZ1200-BR) *modelos com USB 2) BACK-UPS BR...

Cpuspeedy is simple and easy to use program which allows you to change the clock speed and voltage of the CPUs on the fly, using the Linux's CPUFreq driver. Use it and you should save battery consumption and reduce the temperature of your laptop.

Apcupsd is a program for monitoring UPSes and performing a graceful computer shutdown in the event of a power failure. It runs on Linux, Mac OS/X, Win32, BSD, Solaris, and other OSes.

powerkit is an lightweight desktop independent full featured power manager, originally created for Slackware (but will work on any Linux/FreeBSD distro) for use with alternative desktop environments and window managers, like Fluxbox, Blackbox, FVWM, WindowMaker, Openbox, Lumina and others.

Kernel patches and tools providing OS based support for suspending your Linux computer.

This is a small program that reads and writes the WakeUp time in the BIOS. This is done via /dev/nvram on recent kernels (>2.4.6, including 2.6.x) or, alternatively, via direct ISA access. On this WakeUp time the computer is powered on automatically.

A Shutdown timer using Qt which runs halt inside it. easy to install and easy to use...

gapcmon is a gtk/glib desktop monitor program for the apcupsd package. apcupsd interfaces with UPS power systems on local or networked systems. gapcmon connects to apcupsd via the NIS api to collect and displays the current operational state of the U

gpmudmon is a battery monitor for Linux PPC similar to Batmon but running as a Gnome applet. It displays the current charge of the battery and whether your Powerbook is connected to the power supply or not. It also has an optional gauge to show the curren

tcron integrates 'cron/at' with ATX power-up capability. It can invoke multiple cron/at jobs with power-up/shutdown a day. You can use it to: 1. Power up to play muisc/sound and shutdown (super alarm). 2. Record TV/Radio programs

Monitors Input usage such as Mouse/keyboard/gamecontrolers to allow powering down of system when it is idle for a user specified amount of time.

DPM explores technologies to improve power management, with a focus on techniques applicable to running systems, adjusting power parameters on-the-fly in order to save power during brief idle periods or execution of tasks with lower power demands.

A set of daemons to control software-controllable LEDs on Laptop computers to display various states.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

Small -Wall -pedantic C program, using libusb, developed mainly for Linux. Aimed to provide a fully functional (textual) interface for a Gembird USB device "Silver Shield Programmable Power Outlet Strip" (SIS-PM), including the beeper, sockets and time

Genpower is a daemon that monitors the state of an uninterrupted power supply device (UPS) through an RS232 serial interface, and takes action according to the state of the UPS. A variety of device and cables are supported.

An opensource replacement for the Commander Pro software available for download from http://www.ups-software-download.com This works with the no-name UPS available from Dick Smith in Australia, and probably others that use this software As of 12-12-2008,

Enables the possibility of suspending a machine to disk under Linux. It does not need either APM or ACPI support. Software suspend creates an image which is saved in swap partition(s) or a regular file. At the next boot, the kernel detects the saved imag

Power acpid is an acpi (Advanced Configuration and Power Interface) daemon designed to be more functional and improve on the design of the current acpid. Power acpid is very loosely based on work from acpid.sourceforge.net.

osdacpi lets you monitor battery status, thermal status, and more information releated to acpi using osd style displays.

A UPS monitor daemon for the CyberPower 320 SL UPS which allows you to specify any serial port to watch or any shutdown script you would like to occur. It is very compact and easily used.

Colection of tools to monitor and manage a Socomec/Sicon Ofys UPS connected to the computer through a serial cable. At the moment, only a command line utility has been written.

MyApm is a simple applet displayed in the KDE-Kicker panel showing battery time remaining of an APM supported-laptop. Settings like energylevels, warnsnd and -msg are configable. It uses the remaining min of /proc/apm instead of the "%" like other apmds