Open Source C Simulation Software - Page 6

This project enables the introduction of community-based mobility models into the OMNET++ simulation environment. These models provide many desired characteristics, such as socially influenced mobility decisions and are quite realistic. One specific model, namely the Enhanced Community-based mobility model, is very suitable for opportunistic routing research comparing to the others, because of its advanced properties. These include a pause period, conformance to the existing social ties and the ability to produce periodical epochs during the simulation. This is therefore, the main mobility model provided by this project. Up to now, OMNET++ and the INET and INETMANET frameworks do not include an opportunistic routing protocol implementation. Additionally, they lack socially-aware mobility model support, thus making the simulation environment not suitable for opportunistic and delay-tolerant research, especially for Mobile Social Network.

This is a bubble tubes (waterpas) application with a photorealistic EFL-based GUI for handheld devices with accelerometers. It reads data from accelerometers, determines orientation of device and makes moving bubbles in tubes.

All pairs n-body simulation of electromagnetic forces on charged particles, adapted from Nvidia SDK 3.2 sample. Uses Lorentz force from EM fields via the Biot-Savart law for moving charged particles (uses relative velocity). Relativistic.

The backtracking extension to the EPANET hydraulic modeling toolkit

Multinetbot is an adaptation of EasyBot (http://www.easybot.com.ar). It adds the capability to control multiple real bots over a wireless connection, and the possibility of use multiple and different neural networks that are loaded at runtime.

The main purpose of this project is to develop the control software of the digital three phase soft-starter which allows the user to start and stop the motor in an effective way.

This project introduces a console application designed for functional and behavioral emulation of the old Soviet calculator EPOS-73 (ЭПОС-73) also known as Elektronika B3-11 (Электроника Б3-11). The project is conceived as an auxiliary for verification of the switch-level simulator based on Verilog HDL of the said apparatus. Calculator model EPOS-73 is interesting in that it was one of the first models of Soviet computing performed at LSI, that were fully designed by Soviet engineers. It was used a set of four LSIs series K1ZHG451...4 (К1ЖГ451...4) or later designation K145HK1...4 (К145ХК1...4). The choice of this calculator as an object of modeling is due to the presence of (miraculously survived to this day) a sufficient set of design documentation for the technology applied in its LSIs, including a technical description of the device, revealing its calculating algorithms. The project is intended for research and education purposes.

Major looseless compression algorithms library and documentation. First project: Arithmetic, Huffman, LZ77, LZ78, LZW, RLE. Second project reimplements Deflate. Documentation explains major Entropy Compression Methods.

A open platform for the design space exploration of a paramerized architecture based on a EPIC/VLIW core. It includes area, power and performance estimators and the implementation of several exploration algorithms presented in literature.

The EvoGrid is an effort to develop a distributed simulation system to simulate potential pre-biotic chemical environments.

We experiment with Evolution of Artifical Neural Networks, combining the two fields of Evolutionary Computation and ANNs. Our methods are applied to a variety of interesting problems. To learn more, click on "Home Page", "Mail", or "Files".

The objective of this project is to implement a fully open source software package to design X-Band antennas similar to the ones developed by NASA fot Space Technology 5 Mission.

Its a model fitting framework which optimizes the model parameters to make the model output match the desired data.

Intend to reproduce most of the conversational programming functionality of the Fagor 8055TC lathe controller. Web browser interface for easy portability between different OS. Visit project web-site for demo.

Fast-DCM (Fast-DynamicCausalModelling) is an open-source addon for the SPM5 toolbox (http://www.fil.ion.ucl.ac.uk/spm/software/spm5/). It accelerates the estimation of Dynamic Causal Models.

Flight Simulator Operating System (FSOS) Project provides a series of X-Plane Plugins that enhance the capabilities of X-Plane for scientific or engineering research.

A graphical MatLab framework for estimating the parameters of, modeling and simulating static and dynamic linear and polynomial systems in the errors-in-variables context with the intent of comparing various estimation strategies.

This project is a collection of FreeFEM++ scripts used to find numerical solutions of the free-surface incompressible Navier-Stokes equations. The boundary interpolations from a moving mesh are suitable for applying surface tension boundary conditions

A portable, high-level 3D engine with an emphasis on generality. So far it is mainly used in CAD applications in need of geometrical constraint solving and other geometrical methods. FreeSG is designed as an integrable component and not a framework.

This is a set of tools for simulating fusors/IEC devices in their various forms.

It is an 8085 simulator. it is having very user friendly graphical user interface. It can be used to test 8085 programs before actualy implementing them on target board. For Win32 version you must have latest GTK+ runtime installed on your system. Find l

A three-dimensional Game of Life implementation.

Geometric modeling, mesh generation and definition of boundary conditions for the numerical solution PDE problems by finite element and finite volume methods.