Ribbon or lace

Good morning and Happy Digi Choosday to you all.

This week over at the blog the team were challenged to use some ribbon or lace and here is my make.

To make this colourful tag I ink up some white linen card and then cut it in the shape of a tag. I added a squiggly line around the edges to frame it. I then fussy cut some left  over elements from a Winnie In Wonderland design sheet I used to make a card and mounted them onto the tag using 3D foam. Then I finished it off by adding some sparkly ribbon. So on this tag there are 2 faux ribbon bows and the real ribbon at the top.

I'm entering this into the following challenges:
Artistic Inspirations - ATG
Crafting From The Heart - ATG
lil patch of crafty friends - ATG

Ribbon and lace

Good Morning and Happy Choosday everyone, and that of course means that it is

as well. So after you're done here don't forget to go over to the Digi Choosday blog to grab the code and of course check out my talented teamies makes.

The challenge for you is of course anything goes but for the team this week the challenge is to use either ribbon or lace, or both, and here is my make.

I used the amazing Winnie In Wonderland collection to create this gatefold card. You can buy this in smaller kits HERE if you don't want the full kit, but why wouldn't you, it's amazing!

So I chose a paper and matted onto black card for the front, then chose a paper and digitally cut a heart frame out for the inside to write a message on. I also matted this onto black card. I then chose my images, the red Queen and the White Rabbit and printed them out 4 times so I could decoupage them. I then printed out some embellie. I made the decoupage up and mounted all the embellies onto 3D foam to give the card dimension. I then added real bows over the printed ones on the right hand side, and added an extra ribbon triple bow over the playing cards.

This is the inside of the card.

 And here are a few close ups of the dimension I got with the decoupage.

I printed everything for this onto matt photo paper so the colours stand out more.

 And finally the bows.

I'm entering this into the following challenges:

Artistic Inspirations - ATG

Craft-Dee Bowz - ATG with a handmade bow

Crafting From the Heart - ATG

Craft Your Passion - ATG

Creatures and Critters - ATG with a creature or critter

Ultimate Graphic 160gsm (NS)

Winnie in Wonderland Big Kahuna Download

Add a ribbon.

Good morning and Happy Choosday everyone. Today at the Digi Choosday blog we have a new challenge for you and that challenge is "Add a Ribbon". Also don't forget that today is also

So when you've done here, and you've checked out my teamies makes HERE, pop over to the SHOP and claim your massive discount off of some of our fabulous Digi downloads.

So onto my make for the Add a Ribbon challenge.

 I've used some papers and a digi from the fabulously lush Winnie In Wonderland collection. I printed the digi out 3 times so I could cut bits out to make some decoupage with. I put the papers onto the card at an angle and or course as I haven't used card behind the papers I've used the black fine liner squiggly line. I've also inked the edges of the papers and the background of the image black to make them pop a bit more. I've then added all the layers with 3D foam, added a few embellies and finished off with a bow. This ribbon is just perfect for this collection with it's clocks on.

I'm entering this into the following challenges:
Artistic Inspirations - ATG
Craft-Dee-Bowz - ATG with a handmade bow
Crafting From The Heart - ATG
Craft Your Passion - ATG
World Wide Design Team - ATG