More 6mm - old projects, new tools

From a few weeks back now, but here's some SU-85I and a couple of BT-42s (3d printed turret on H+R BT chassis). The latter was something I wanted to make years ago, but only had the chance now I have the printers.

Antonov An-225 Mriya - WIP

I quite fancied this monster aircraft and found here https://www.thingiverse.com/thing:2814358. Printing has been completed since this WIP shot. By the time you have read this, I should have done an AN-22 too.

T-55AD Drozd

For some years I've wanted to do some T-55AD tanks for my Naval Infantry, and since no one makes one, I decided to make my own. I remixed Bergman's T-55A turret, to make a quick and dirty T-55AD. It's not exact, but looks fine at 6mm scale. I've shared the STL at https://www.thingiverse.com/thing:4750382

Turret on spare Scotia T-55A chassis

6mm Odds and Ends Pt.1

 More 3d printed 6mm, but that doesn't fit with the other countries pages - links on previous posts. 

Argentine DL43 Nahuel Tank

Japanese Misubishi F1

Norwegian NM142 SPAT

6mm Soviet Ships - WIP

 Found all over the net, and rescaled for 1/300

Polnocny C, B (x2) and A 

Alligator (printing went badly, so it's needing lots of manual work and reprinting details)

Lun class ekranoplan

6mm Commonwealth Pt.1

 More 3d printed stuff, this time British Commonwealth things. Links for all of these are on the previous 6mm posts.

Commonwealth CA-15 Kangaroo

Ram II

A-39 Tortoise

6mm Italians Pt.1

 More from Captain Ahab (https://www.thingiverse.com/captain_ahab_62/designs), this time some modern Italians. I've always wanted to have a load of VCC APCs, I've printed some more but didn't have them all to hand to photograph.

VCC-1 without and without gunner with TOW and with 25mm SPAAG (SIDAM-25) which still needs barrels.

Arisgator

6mm Germans Pt.1

 Moving on the Germans, Char -Bs and LWS from Bergman (https://www.thingiverse.com/m_bergman/designs), Ratte from https://www.thingiverse.com/thing:2220891

Flammwagen auf Pzkpfw B-2(f)

10.5cm leFH18/3 auf GW B-2(f)

Ratte (printed badly twice, hence the PLA pink section grafted on the bottom). M113 variant included for scale

LWS

6mm Russians Pt.1

Time for some Soviets. From various places on Thingiverse and Cults3d (some I have to buy). The 

https://www.thingiverse.com/captain_ahab_62/designs

https://cults3d.com/en/users/ErikGen/creations

https://www.thingiverse.com/m_bergman/designs

Mil Mi-10 Harke (converted from the one found here https://sketchfab.com/3d-models/mi10-b0fc8efb90554c7b8c7a0abc847822c1 and still on the print supports)

An-2 Colt

Tu-22 Blinder

Tu-14 Bosun

Mig-15UTI Midget

KV-5 (https://www.thingiverse.com/thing:2459217)

T-35 Command Version (https://www.thingiverse.com/thing:1807534)

6mm Americans Pt.1

More 3d printed stuff, this time Americans. From various places on Thingiverse and Cults3d (some I have to buy).

https://www.thingiverse.com/captain_ahab_62/designs

https://cults3d.com/en/users/ErikGen/creations

https://www.thingiverse.com/m_bergman/designs

F-11

MBT-70

F-84F Thunderstreak / RF-84F Thunderflash

UH-1B

A-26 Invader (Vietnam era)

LVTE-5

YA-9

SR-71

XB-42 Mixmaster

A2D Skyshark
 

Grumman Guardian

Convair Seadart

XB-51

FJ-1 Fury

6mm Chinese Pt.1

 I've been invited back to play at our annual 6mm game in Grimsby during the autumn, and I've been really fired up to get some modelling done for this, but also for my other 6mm armies. This has meant 3d printing new and usual stuff. I'll start of showcasing some low quality WIP shots of what I've done so far. These are from https://www.thingiverse.com/captain_ahab_62/designs

Shenyang J-20

Nanchang J-12

Xi'an JH-7

Shenyang J-8I and J-8II

Chengdu J-10 

JF-17 Thunder

ZTQ-15

Chengdu J-7

ZTL-11