Showing posts with label armature. Show all posts
Showing posts with label armature. Show all posts

Friday, September 30, 2016

Papier-mache Masks part 1

My DragonWing Arts students have been building masks, and I want to share this fun and easy process with you all!  Above, you can see a mask armature covered with papier-mache. 
To create the armature, we began with a brown paper bag stuffed tightly with wads of newspaper, scrunched up one sheet at a time.  You can make these masks any size, using small lunch bags, bags from the bagel store, tall narrow bags from the liquor store, or, as in the case of the ambitious kids above and below, grocery-size paper bags!
Plan on washing your hands when you are done stuffing!  Newspaper ink will come off onto your hands!  When the bag is stuffed, scrunch the top shut, and seal with a rubber band or a twist-tie, and add masking tape to hold it securely.
Then, decide which sides of the bag are the front and back, and whether the end of the bag, tied tightly and taped, will be the chin or forehead.  Features such as bulging eyeballs, mouths, ears, horns, noses, etc are added using cardboard rolls, cereal box cardboard, and other recyclables.  Notice how the bottom of the toilet paper roll pictured below was cut into flanges or tabs that can be taped onto the stuffed bag. 
 On the mask below, you can see how we used a Sharpie to draw a line dividing the front and back, so that all the features are added on the front.  Names were written on the back. 
 Above and below, you can see how items were taped on using straight lines of tape that crisscross each other.  The kids learned to pinch the tape in tightly to the object they were adding to their bag, extending the onto the bag.  Tape doesn't stick to the air!!! 
 Not shown in these photos, ears can be made with cereal box cardboard, with tabs or flanges to help attach them securely to the bag. Below are a couple of older photos, using lunch bags for masks made by my former third grade students.  Note the use of egg cartons for features, and how toilet paper rolls can be pinched shut to make beaks. 
Once the features have all been added, papier-mache can begin.  I usually recommend Art Paste ("School Smart" brand, purchased from School Specialty/Sax).  But since these masks are going to be extra-large, and since I currently only  have three students, with no wheat allergies, I opted for an uber-strong and extra-sticky papier-mache goop.  The recipe was a boiled paste of flour, rice flour, and more, and I found the terrific recipe HERE.  I've used it before and the stuff works like a dream.  BUT - if you work in a school, it isn't half as practical as the Art Paste, because it needs to be refrigerated to save, and only will last about a week before it begins to spoil.  Plus, remember, it has wheat in it, which means that people with wheat allergies could have a problem.  And anyhow, you  have to cook it to make the paste! 
 Above and below, you can see my DragonWing Arts students putting the papier-mache on their masks, using overlapping layers to cover the entire front half of the bag and all added features. 
 Here they are, partly done, but much more papier-mache to go!
And today, all the papier-mache was finally completed!  The mask on the right below is my sample, using a tall thin bag from the liquor store.  The sphere on the right of the photo is an eyeball that will fit into the eye socket on the upper part of the mask.  Cyclops!
 Below, you can see how we used cereal box cardboard with taped-on armature wire to create a tongue for one of the masks.  The armature wire allowed the young artist to create the curved shape.  The extra wire on the end will be used to insert the tongue into the mouth of the mask (the one pictured at the very top of the post).  The tongue has been covered with papier-mache. 
 In case you are wondering what our next step will be, it will be fun!  We will punch a hole in the back of the bag, and "scoop the brains out"!  (Actually, we will be removing all the newspaper, of course.)  Then we will trim off the back of the bag, paint the resulting mask, and embellish with all sorts of goodies, such as yarn, raffia, feathers, buttons, etc.  Below are a few pics of those 3rd grade lunch-size paper bag masks from a few years ago, that I previously mentioned. 
I currently only see my young students one a week, (but lucky me, our after-school class is an hour and a half long!), so they won't be completed immediately.  We'll be painting them with a coat of gesso to strengthen them and provide a super painting surface, and then we'll be painting with acrylics.  While paint is drying, my students will be working on other  projects that I'll be showing you soon!  So be patient, the masks will be done in a few weeks and I'll have part 2 of this post then!

Friday, March 4, 2016

Papier-Mache "Wild Beasts"!

 My four DragonWing Arts students recently completed building goofy papier-mache "wild beasts".  Above is the creation of my oldest student in the class, a 4th grader who takes her work and her decision-making very seriously.  

The first steps were to use their sketchbooks to develop ideas for their creatures, and then to figure out what would make good armatures (or the bones and muscles) from the materials I had available.  The materials used included plastic bags stuffed with newspaper, wads of newspaper, cardboard rolls, cereal box cardboard, some armature wire, and a few other oddball recyclables that I had available. The kids learned how to cut tabs for attaching features, and then used lots of masking tape to make them hold together securely.  Here you can see what they look like from design to completion. 
 I unfortunately don't have a photo of this 3rd grade boy's project in its absolute complete state.  Some pompoms, mimicking the pink, orange, and purple of the spikes, were glued onto the black spots, and crazy antennas were added over the eyes.  Here it is just prior to those final touches. 

 My youngest student in the class is a 2nd grader.
Here's her project from design to completion. 
Below is a completed photo of the project, but unfortunately it is a sub-par photo.  In case you can't tell, the final touch on this creature was to add a row of colorful feathers going down his back, kind of like a full-body mohawk haircut! 
 This frontal pic below was taken before the row of feathers was added to the beast's back.

 The ocean beast below was designed and created by a third grade boy.  
Here it is, from design to completion. 
He is now wearing a cute collar with a dangling ornament, which unfortunately was not on the beast when I took these pictures. 

 The kids used art paste and torn newspaper strips for their layers of papier-mache, using my fool-proof method, which you  can read about HERE.  If you are going to be at the NAEA (National Art Ed Association) convention in Chicago in a couple of weeks, I'll be teaching a workshop that will cover all sorts of tips and hints to make papier-mache easy and fun.  I'd love to see you there!
 You can tell, from the photo below, just how much fun this process can be!  But why, when she has a container of goo right in front of her, does she have to reach over her brother to access a different bowl of goo??  Silliness!!

When the papier-mache was completed and dry, the beasts were painted with a layer of gesso.  Gesso is not always a necessary step, but it strengthens the papier-mache, and also provides a beautiful white surface for painting. 
 The projects were then painted with school grade acrylic paints, and embellished with feathers, pipe cleaners, pompoms, wiggle eyes, and more, to create the finished pieces I've shared above. 

 This week, the four students had a mini art show, showing off their painted wild beasts, the papier-mache beasts, and a couple of other projects too.  I'll share about two of those other projects in my next blog post.  In the meantime, here are the kids proudly sharing their creations to their families!

Saturday, January 22, 2011

I need some advice - can you help?


All right, creative art teachers, I need you!! Here's the problem:

You may recall that my 6th graders are building "people in motion", using wire armature, newspaper, tape, and then plaster bandage. As you can see by the SCUBA diver, not all the people are standing on their feet. There's swimmers and divers, there's someone meditating who is levitating above a rug, there's a karate kick caught in mid air, and more.

But my big challenge is the three basketball players, all who are designed to be caught in mid-dunk. Which means of course you need a basketball hoop. So far we've started with a dowel rod stuck into a styrofoam base, and a backboard made from foam core. But what can we make the basket out of? It needs to look enough like a basketball hoop, but should support a hanging sculpture. And I'm not about to start crocheting. It needs to be easier than that. Any ideas? For a size perspective, the basketball player sculptures are between 12 to 15" tall.
Thanks in advance for your ideas!