Scribd
Upload
68 views1 page

1987-2004 DAKOTA PICKUP: Do Not Exceed Vehicle Manufacturer'S Recommended Towing Capacity.

This document provides instructions for installing a receiver hitch on 1987-2004 Dakota pickup trucks. It lists the hitch and required parts. The hitch has a 5,000 pound gross load capacity when used as a weight carrying hitch and 8,000 pound capacity when used as a weight distribution hitch, not to exceed manufacturer towing recommendations. Installation instructions include removing frame bolts, positioning the hitch, drilling holes for mounting (methods vary by year), installing fasteners, and torque specifications. The hitch weighs 36 pounds and takes approximately 25 minutes to install.

Uploaded by

praxlopez25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views1 page

1987-2004 DAKOTA PICKUP: Do Not Exceed Vehicle Manufacturer'S Recommended Towing Capacity.

This document provides instructions for installing a receiver hitch on 1987-2004 Dakota pickup trucks. It lists the hitch and required parts. The hitch has a 5,000 pound gross load capacity when used as a weight carrying hitch and 8,000 pound capacity when used as a weight distribution hitch, not to exceed manufacturer towing recommendations. Installation instructions include removing frame bolts, positioning the hitch, drilling holes for mounting (methods vary by year), installing fasteners, and torque specifications. The hitch weighs 36 pounds and takes approximately 25 minutes to install.

Uploaded by

praxlopez25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

13280

11/15/2012

1987-2004 DAKOTA PICKUP

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 5,000 LBS. TRAILER WEIGHT & 500 LBS. TONGUE WEIGHT. GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: 8,000 LBS. TRAILER WEIGHT & 800 LBS. TONGUE WEIGHT

***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***


Parts List ITEM QTY PART NUMBER DESCRIPTION 1 4 1/2-13 x 1 3/4 CARRIAGE BOLT 2 3 4 5 4 4 2 2 HFN 1213 CM-SP1 7/16-14 x 1 1/2 7/16-14 HEX FLANGE NUT .250 x 1.50 x 2.00" SQUARE HOLE SPACER CARRIAGE BOLT HEX FLANGE NUT
PASSENGER SIDE FRAME RAIL

DRIVERS SIDE FRAME RAIL

4 HOLES VARY FOR DIFFERENT MODEL YEARS

HITCH WEIGHT: 36 LBS. INSTALL TIME: 25 MINUTES INSTALL NOTES: -DRILLING REQUIRED

INSTALLATION STEPS
1) Remove rearmost bolt at the end of the frame on both sides. NOTE: The two rearmost bolts on some models are connected with a plate. Remove and cut the plate midway between the bolts. Discard the rearmost and reinstall the other. 2) Position the hitch on the vehicle and install 7/16" fasteners. 3) 95 and earlier: Using the side bracket of the receiver as a template, drill two holes into bottom of frame rail with a 1/2" bit. Repeat on other side. 96 models: Using the side bracket of the receiver as a template, drill forward attachment hole into bottom of frame rail with a 1/2" bit. Repeat of other side. 97 models and later: align hitch with existing holes. 4) Install remaining 1/2" fasteners as shown. Note: Exhaust hanger may need to be repositioned. 5) Torque all 1/2" fasteners to 110 lb.-ft. and all 7/16" fasteners to 70 lb.-ft.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

You might also like