Safety glasses should be
11265 INSTALLATION INSTRUCTIONS worn at all times while
installing this product .
YEARS: 2003-PRESENT MAKE: TOYOTA MODEL: COROLLA STYLE: SEDAN
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
WEIGHT CARRYING: WARNING:
TRAILER WEIGHT: 2,000 LBS. WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER
TONGUE WEIGHT: 200 LBS. (WHEEL-LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT
WWW.CURTMFG.COM FOR FURTHER INFORMATION.
PRO INSTALL TIME: 10 MIN. INSTALLATION TIPS: VEHICLE PHOTO:
NOVICE INSTALL TIME: 20 MIN. 1. BEFORE YOU BEGIN INSTALLATION, READ ALL
IF YOU ARE HESITANT TO UNDERTAKE INSTRUCTIONS THOROUGHLY.
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED 2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
CURT INSTALLER FOR ADDITIONAL ASSISTANCE. REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
INSTALLATION REQUIRES: TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 877.287.8634
19mm
LEVEL OF DIFFICULTY: EASY
TORQUE EASY MODERATE CHALLENGING
RATCHET SOCKET
WRENCH
REPRESENTATIVE PHOTO
- NO DRILLING REQUIRED
9" HITCH ILLUSTRATION:
SOCKET SAFETY
GLASSES
- CLEAN EXISTING
EXTENSION WELDNUTS
- REMOVE TOW LOOP(S)
(IF PRESENT)
PART REMOVAL
MAKE SURE YOUR HITCH MATCHES
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace
the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement
of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
9/11/2013
I NSTALLATI ON WALKTHROUGH:
1. If present, remove existing bolts from tow loop(s).
Parts List
Return tow loop(s) and bolts to owner.
ITEM QTY PART NUMBER DESCRIPTION
1 4 M12-1.25 x 30mm HEX BOLT
2 4 1/2 CONICAL TOOTHED WASHER
2. Raise hitch into position and align the holes in the side
2 plates with the weldnuts in the frame rails. Secure the
hitch using M12-1.25 x 30mm hex bolts and 1/2" conical
toothed washers.
1 DESIGNED FOR USE WITH
BALL MOUNT 45521
EURO MOUNT OPTION AVAILABLE
45571 (1 7/8" BALL) & 45572 (2" BALL)
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
INSTALLATION WALKTHROUGH:
3. Torque all M12 hardware to 86 ft-lbs.
INSTALLATION COMPLETE
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
11265 TOYOTA COROLLA
9/11/2013
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT.
* * * DO N OT EX CEED V EH I CLE M AN U FACT U RER'S RECOM M EN DED T OWI NG CAPACI T Y .* * *
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS.
* * FAI LURE T O PROPERLY SUPPORT N ON-T RAI LER LOADS WILL V OID PRODUCT WARRANTY * *
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634
Parts List
ITEM QTY PART NUMBER DESCRIPTION
1 4 M12-1.25 x 30mm HEX BOLT
2 4 1/2 CONICAL TOOTHED WASHER
PASSENGER SIDE
FRAME RAIL
TOW LOOP & HARDWARE
(REMOVE IF PRESENT)
DRIVER SIDE
FRAME RAIL
FASCIA
EXISTING WELDNUTS
(BOTH SIDES)
EURO MOUNT
2
OPTION AVAILABLE
45571 (1 7/8" BALL)
45572 (2" BALL)
1
TOOLS REQUIRED DESIGNED FOR USE WITH
RATCHET BALL MOUNT 45521
TORQUE WRENCH
19mm SOCKET
9" EXTENSION
SAFETY GLASSES
HITCH WEIGHT: 20 LBS.
INSTALL TIME
PROFESSIONAL: 10 MINUTES
NOVICE (DIY): 20 MINUTES
INSTALL NOTES:
- NO DRILLING
- REMOVE TOW LOOP
(IF PRESENT)
INSTALLATION STEPS
1. If present, remove existing bolts from tow loop(s). Return tow loop(s) and bolts to owner.
2. Raise hitch into position and align the holes in the side plates with the weldnuts in the frame rails.
Secure the hitch using M12-1.25 x 30mm hex bolts and 1/2" conical toothed washers.
3. Torque all M12 hardware to 86 ft-lbs.
PERI ODI CALLY CH ECK T H I S RECEI V ER H I T CH T O EN SU RE T H AT ALL FAST EN ERS
ARE T I GHT AN D TH AT ALL STRU CT U RAL COM PON ENT S ARE SOU N D.
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
