Scribd
Upload
135 views1 page

Chevy Blazer/GMC Jimmy Hitch Parts

This document provides installation instructions and specifications for a Curt hitch model 13401 that is compatible with 73-91 Chevy Blazers and GMC Jimmys. The hitch has a 5,000 lb gross trailer weight and 500 lb tongue weight rating when used for carrying weight, and 10,000 lb gross trailer weight and 1,000 lb tongue weight rating when used as a weight distribution hitch. The document lists the parts, provides diagrams showing hitch assembly, estimates installation times, lists installation steps which require drilling for some models, and provides periodic inspection and warranty information.

Uploaded by

sharawy12
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
135 views1 page

Chevy Blazer/GMC Jimmy Hitch Parts

This document provides installation instructions and specifications for a Curt hitch model 13401 that is compatible with 73-91 Chevy Blazers and GMC Jimmys. The hitch has a 5,000 lb gross trailer weight and 500 lb tongue weight rating when used for carrying weight, and 10,000 lb gross trailer weight and 1,000 lb tongue weight rating when used as a weight distribution hitch. The document lists the parts, provides diagrams showing hitch assembly, estimates installation times, lists installation steps which require drilling for some models, and provides periodic inspection and warranty information.

Uploaded by

sharawy12
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

13401 73-91 CHEVY BLAZER / GMC JIMMY (FULL SIZE)

10/1/2012
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 5,000 LBS. TRAILER WEIGHT & 500 LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: 10,000 LBS. TRAILER WEIGHT & 1,000 LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813

Parts List
ITEM QTY PART NUMBER DESCRIPTION
1 4 HFN 1213 HEX FLANGE NUT
2 4 FW12 FW, 12, ZP
3 2 1/2-13 x 1 3/4 HEX BOLT
4 2 CM-SP44 .250 x 1.50 x 2.00" SQUARE HOLE SPACER
5 2 1/2-13 x 1 3/4 CARRIAGE BOLT

3
4

HITCH WEIGHT: 29 LBS.


INSTALL TIME
PROFESSIONAL: 45 MINUTES
NOVICE (DIY): 90 MINUTES
INSTALL NOTES:

DRILLING REQUIRED

INSTALLATION STEPS
NOTE: 1973-1980 VEHICLES, FORWARD ATTACHMENT HOLES MUST BE DRILLED.
(1) LOCATE HOLES IN BOTTOM OF FRAME WHICH CORRESPOND TO HOLES IN HITCH. REMOVE ANY UNDERCOATING
PRESENT FROM ATTACHING SURFACES BEFORE INSTALLING HITCH.

(2) FISHWIRE APPLICABLE BOLTS AND SPACERS INTO FRAME HOLES.

(3) RAISE HITCH INTO POSITION. PLACE ONE FLAT WASHER PER SIDE BETWEEN THE FRAME AND HITCH
AT THE REARWARD ATTACHMENT LOCATION.

(4) TORQUE ALL HARDWARE TO 110-FT-LBS USING A TORQUE WRENCH.

NOTE: REMOVAL OF LICENSE PLATE MAY BE REQUIRED TO INSTALL HITCH

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS


ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.

You might also like