Scribd
Upload
56 views1 page

Red Lead Rust Prevention Primer

Red lead primer 911 is a rust prevention primer based on alkyd resin and zinc chromate pigments. It is used for steel structures and provides very fast drying, good adhesion, excellent resistance to water and oils, and good rust resistance at a relatively low cost. The primer dries to the touch within half an hour and fully dries within 4 hours at 25°C, and can be overcoated within 6 hours to 3 months after application.

Uploaded by

Jason Villa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

Red Lead Rust Prevention Primer

Red lead primer 911 is a rust prevention primer based on alkyd resin and zinc chromate pigments. It is used for steel structures and provides very fast drying, good adhesion, excellent resistance to water and oils, and good rust resistance at a relatively low cost. The primer dries to the touch within half an hour and fully dries within 4 hours at 25°C, and can be overcoated within 6 hours to 3 months after application.

Uploaded by

Jason Villa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RED LEAD PRIMER, GENERAL PURPOSE

PRODUCT NUMBER 911


TYPE Rust prevention primer based on alkyd resin and special resin with zinc chromate, red
lead rust resistant pigments.
USES Used for steel structures for a large quantity use.
CHARACTERISTICS 1. Very fast drying and good adhesion.
2. Excellent resistance to water and oils..
3. Good rust resistance.
4. Relatively low cost.
FINISH Flat
COLOR Orange Red
2
HIDING POWER Above 9.1 m /L
MASS DENSITY Above 1.5 Kg/L
VISCOSITY 75~95 KU (25℃)
DRYING TIME Set-to-touch 1/2 hr. Dry hard 4 hrs. (25℃)
OPTIMUM FILM THICKNESS Wet 90 microns Dry 40 microns
2
THEORETICAL COVERAGE 42.0 ㎡/Gal 11.1 ㎡/L 7.0 m /Kg
OVERCOATING INTERVALS Min. 6 hrs. Max. 3 months
NON-VOLATILE CONTENT Above 70%
THINNER No.805 Paint Thinner（OM-07）
THINNING RATE 5~10%（cleaning for tools not included）
PRECEDING COATS No.908 Wash Primer（SP-01/02）
SUBSEQUENT COATS Ready-Mixed Paints, Synthetic Enamels
STORAGE SHELF LIFE Minimum 1 year under normal storage conditions.
APPLICATION METHOD Spray, Brush, Roller
NOTE 1. Before application, stir paint evenly, and when paint is too thick, thinner within
specified quantity can be added.
2. Adhered moisture, grease, dirt, damaged or loose old paint and corrosive salts on
substrate must be cleaned thoroughly.
3. Avoid applying the paint in rainy, humid weather or substrate temperature
excessively high to 40℃ or low to 10℃.
4. Avoid applying to insufficient drying of previous paint coat.

EPDM090911XX V1.0

You might also like