Scribd
Upload
106 views1 page

High Speed Precision Lathe Machine With DRO

The document is a compliance report for a high speed precision lathe machine. It lists 27 specifications for the machine's working range, work spindle, and tool slide. The vendor is asked to write numerical values that comply with the given ranges or indicate Yes/No for specifications regarding taper bores and chuck types.

Uploaded by

bipindimri2014
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
106 views1 page

High Speed Precision Lathe Machine With DRO

The document is a compliance report for a high speed precision lathe machine. It lists 27 specifications for the machine's working range, work spindle, and tool slide. The vendor is asked to write numerical values that comply with the given ranges or indicate Yes/No for specifications regarding taper bores and chuck types.

Uploaded by

bipindimri2014
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

High Speed Precision Lathe Machine with DRO

ANNEXURE II

(Compliance Report)

Sr. SPECIFICATIONS Units Compliance Vendor Should


No write under
Compliance column
1.0 MACHINE SPECIFICATION
(Working range)
1.1 Centre Height 120mm to Write numerical
140mm value
1.2 Swing Over machine bed 240 mm to Write numerical
300 mm value
1.3 Swing Over cross slide 140 mm to Write numerical
170 mm value
1.4 Distance between the centres 500 mm to Write numerical
700 mm value
1.5 Travel of Cross slide 100 mm to Write numerical
160 mm value
1.6 Travel of Top slide 90 mm to 115 Write numerical
mm value

2.0 WORK SPINDLE


2.1 Type of spindle Metric 50/40 Write type of
spindle
2.2 Size of Spindle 108mm to Write numerical
133 mm value
2.3 Type of Spindle Nose A2- 5- A2-4 Write type of
inches/ Size 4- spindle nose
Size 5 (DIN
55027)
2.4 Taper Bore in Spindle As per IS Metric 50/40 Yes/No with size
2582-1972 with latest
Amendment
2.5 Taper Bore in Spindle sleeve As MT-3/MT4 Yes/No with size
per IS 1715-1986 with latest
Amendment
2.6 Bore in spindle 38 mm to 43 Write numerical
mm value
2.7 Chuck 3 Jaw self Yes/No
centred chuck

3.0 TOOL SLIDE


3.1 Graduation of longitudinal scale 0.2 mm Write numerical
on apron box hand wheel value
3.2 Graduation of scale on cross 0.005 mm Write numerical
slide spindle value
3.3 Graduation of scale on 0.01 mm Write numerical
compound slide spindle value

You might also like