Scribd
Upload
54 views5 pages

Daily Inspection C&CL

This document provides a checklist for pre-startup and post-startup checks of construction equipment. The pre-startup checklist includes inspecting engine oil, coolant, hydraulic oil, fuel, wheels/tracks, hydraulic brake fluid, transmission fluid, and greasing fittings. The post-startup checklist involves checking the engine sound, for any leaks, and testing the horn. Maintenance tasks like changing air filters, engine oil and filters, and draining fuel-water separators are also listed.

Uploaded by

Jayrold O'Connell
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
54 views5 pages

Daily Inspection C&CL

This document provides a checklist for pre-startup and post-startup checks of construction equipment. The pre-startup checklist includes inspecting engine oil, coolant, hydraulic oil, fuel, wheels/tracks, hydraulic brake fluid, transmission fluid, and greasing fittings. The post-startup checklist involves checking the engine sound, for any leaks, and testing the horn. Maintenance tasks like changing air filters, engine oil and filters, and draining fuel-water separators are also listed.

Uploaded by

Jayrold O'Connell
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Engine sounds normal

Horn
Fire extinguisher Date
Boom control
Drive Equipment type:
Forklift Crane Excavator Truck Skid steer Other
Name

PRE-STARTUP Instruction Status


Check Engine oil level Locate dip stick; wipe dipstick clean Checked
before checking oil level and texture.
Coolant level Locate radiator; remove cap, coolant must Checked N/A
be visible at the top. Add coolant if not.
Hydraulic oil Locate hyd. reservoir tank; check side of Checked N/A
tank for hyd. fluid level.
Fuel level Locate fuel gauge or use CLEAN stick Checked
to guage the fuel level.
Wheels/tracks Visually inspect for abnormalities eg: Checked
deflated tyres, cracked track pads/tyres,
slack tracks.
Hydraulic brake fluid Locate hyd. Brake fluid reservoir Checked N/A
Transmission fluid Repeat instructions for engine oil level Checked N/A
Grease fittings Grease fittings of movable parts eg. Boom, Checked N/A
bucket, lifting arms with (2) pumps of
grease, daily. Wipe off excessive grease.
POST-STARTUP
Check Engine sound Listen for any engine noises, proceed if Checked
engine sounds normal.
Leaks Check for leaks of any kind (oil,air, coolant) Checked
around the machine e.g hydraulic ram
cylinders, hose fittings, undercarriage and
filters whilst engine is running.
Horn Make sure horn works. Checked
Checked
Change
As required air filter : Primary- replace once a year/ every six cleaning, whichever comes first
do not tap or wash, use either vacuum or compressed air
Secondary- never clean it to be reused, just replace it
should be changed same time with primary
her
3 months Eng oil drain when oil is warm
& filter

Checked Fuel-water Drain every 2 days


separator
Checked N/A
Truck air tanks Drain at the end of every day
Checked N/A

Checked

Checked N/A

Checked N/A
Checked N/A
Checked N/A

Checked

Checked

Checked N/A
Checked N/A
Date: _________________ Personnel: x________________________

Equipment type: Forklift Crane Excavator Skid steer Truck Other

Equipment name: ___________________________________________

PRE-STARTUP Instruction Status


Check Engine oil level Wipe dipstick clean before checking oil Checked
level and texture.
Coolant level Coolant must be visible in radiator and/or Checked N/A
in coolant reservoir. Add coolant if not.
Hydraulic oil Check level from the sight glass located on Checked N/A
the side of the hyd. Reservoir tank.
Fuel level Check fuel gauge or use CLEAN stick Checked
to gauge the fuel level.
Wheels/tracks Visually inspect for abnormalities eg: Checked N/A
deflated tyres, cracked track pads/tyres,
slack tracks.
Hydraulic- Check hyd. brake fluid reservoir; must not fall Checked N/A
brake fluid below 'Low' line.

Transmission- Check while hot Checked N/A


fluid

POST-STARTUP
Check Engine sound Listen for any engine noises, proceed if Checked
engine sounds normal.
Leaks Check for leaks of any kind (oil,air, coolant) Checked

around the machine e.g hydraulic ram


cylinders, hose fittings, undercarriage and
filters whilst engine is running.
Horn Make sure horn works. Checked N/A

Comments:

Foreman x _________________________________________

You might also like