160H Motor Grader 2FM00001-UP (MACHINE) POWERED BY 3306 Engine(SEBP...
Page 1 of 3
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 160H MOTOR GRADER 2FM05476
Configuration: 160H Motor Grader 2FM00001-UP (MACHINE) POWERED BY
3306 Engine
Disassembly and Assembly
12H, 140H and 160H Motor Graders Power Train
Media Number -SENR8548-14 Publication Date -01/10/2011 Date Updated -12/10/2011
i02206218
Final Drive - Install
SMCS - 4050-012
S/N - 2FM1-UP
S/N - 2GS1-UP
S/N - 2HS1-UP
S/N - 2LR1-UP
S/N - 2WR1-UP
S/N - 2ZK1-UP
S/N - 3AS1-UP
S/N - 3GM1-UP
S/N - 4ER1-UP
S/N - 4XM1-UP
S/N - 5HM1-UP
S/N - 5ZM1-UP
S/N - 6WM1-UP
S/N - 8JM1-UP
S/N - 8KM1-UP
S/N - 8MN1-UP
S/N - 9EJ1-UP
S/N - 9JM1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 8/1/2014
160H Motor Grader 2FM00001-UP (MACHINE) POWERED BY 3306 Engine(SEBP... Page 2 of 3
S/N - 9TN1-UP
S/N - 9ZN1-UP
S/N - XZJ1-UP
S/N - XZK1-UP
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
Note: Check all of the components and all of the O-ring seals for wear or for damage. Replace
the components, if necessary. Lubricate the O-ring seals lightly with the lubricant that is being
sealed.
Illustration 1 g00621032
1. Install the O-ring seal in the back side of the final drive housing.
2. Install the O-ring seal in the front side of the final drive housing.
3. Install final drive (1) on Tooling (A). Position final drive (1) to the bevel gear case.
4. Install nuts (3) and the washers to the final drive housing. Tighten the nuts (3) to a torque of
430 ± 60 N·m (317 ± 44 lb ft).
5. Repeat Steps 1 through 4 in order to install the remaining final drive.
End By: Install the tandem drive housings. Refer to Disassembly and Assembly, "Tandem and
Cover - Remove and Install" for the correct procedure.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 8/1/2014
160H Motor Grader 2FM00001-UP (MACHINE) POWERED BY 3306 Engine(SEBP... Page 3 of 3
Copyright 1993 - 2014 Caterpillar Inc. Fri Aug 1 09:59:36 UTC+0400 2014
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 8/1/2014
