P9511/P9521 - Compact single axis Controllers P9511/P9521 - Compact single axis Controllers
P9511:
This unit is a very compact, simply programmable single Type designation P 95 X1 - 000 - 230 - 0 - XXXXXXX
• Compact design axis controller.
• Extensive parameter menu The output performance (potential free changeover relays) P95
allows positioning operations with up to three different Compact position controller
• Integrated power pack speeds. An extensive pool of registers and parameters are
Series
already integrated in the standard version e.g.: Spindle
115/230 VAC supply compensation, tolerance window, correction stop, adjust- P9521 with program memory and manual mode
• Potential free able retract functions, datum value, saw blade/tool correc- P9511 without program memory and manual mode
tion and more. Version
Changeover relay outputs To modulate the unit to the used measuring system, there 000 = Standard
• Program
Program memory are a programmable pulse scaling factor, a multi edge 001 = First special version
counter and also a selectable decimal point integrated..
(only P9521) Supply
P9521: The P9521 is identical with P9511, but has two 024 = 24 VDC
• Manual operation mode supplemental functions: 115 = 115 VAC
(only P9521) 1. Manual operation mode (inching mode) 230 = 230 VAC
2. Program memory up to 10 lines Measuring system /Input signals
0 = A, B - 24 V/24 V 20 KHz PNP
1 = A, B, Z - 24 V24 V 20 KHz PNP
P9521 Anschlüsse (steckbare, zugentlastete Schraubklemmen) *M = A, B - Modulation to ELGO-Measuring systems PMIX, LMIX, EMIX, FMIX, MIX
*N = A, B, Z - Modulation to ELGO-Measuring systems PMIX, LMIX, EMIX, FMIX, MIX
Options
EN = Negative logic NPN (all Inputs inclusive index pulse) *in preparation
Technical specifications
Power supply: 230 VAC/50 Hz or 115 VAC/60 Hz +/- 10 %
optional 24 VDC +/- 10 %
Consumption: 450 mA
Encoder
Encoder supply: 24 VDC out
Input signals: PNP, (Optional NPN) min. 200 ms pulse time
Input current: max. 10 mA per Pin
Counting frequency:
frequency: 10 KHz (more on request)
Output signals: potential free Changeovers 210 V/ 2 A
Power down memory: NOV-Ram (service life min. 10 years)
Connections: plugable, strain relieved screw terminals
Displays: 7 digit LED, Height 8 mm
Hardware: 16 Bit Micro controller
Many different incremental measuring systems can be connected to P9511/21. with 32 Kbytes Eprom and 16 Kbytes RAM
A modulation to the measuring system can be ordered as desired Housing: black aluminium panel housing
(see the Type designation „Measuring system/Input signals”). Dimensions of housing: H x W x D = 92 x 66 x 89 mm
Cut out panel: H x W = 93 x 67 mm
Operation temperature: 0...50 °C
Rotary encoders ELGO LMIX/EMIX2 ELGO PMIX Magnetic sensor MS ELGO FMIX ELGO LMIX/EMIX1 and 3
P9511_21-E_06-03 P9511_21-E-23.02 Subject to modifications - ELGO Electric 2002
P9511 and P9521
series
Compact
Positioning-
Positioning- and single axis
Length measuring systems
ELGO Electric GmbH
Position Controllers
Carl-Benz-Str.1 -. D-78239 Rielasingen - Tel.: ++49 (0)7731/93 39-0 - Fax: ++49 (0)7731/213 11 - info@elgo.de - www.elgo.de
