Surface Protective Systems
Technical information
TI 260
Oxydur VE-AR Issue 31|01|2017
Top coat with good abrasion resistance
Base
Epoxy Novolac / vinyl ester resin
Material Group
Floor- / wall coatings - Trowel applied systems
Description
The system is well-curing, even under unfavorable conditions. It is a chemically and thermally highly resistant top coat for
vinyl ester resin-based Oxydur- or Steulerflake systems. It has an outstanding wear resistance.
Use
Use as a top layer in highly abrasive areas of REA absorbers or other components of various industries.
Properties
good chemical and mechanical resistance
Wear resistant
Physical Data
Property (unit), Test method Value
Density (g/cm³), DIN EN ISO 1183-1, ASTM D 792 2.3
Abrasion resistance (mg / 1000 Umdreh.) ASTM D 4060, Taber Disc CS 17 70
Compressive strength (MPa), DIN EN ISO 604, ASTM C 579 100
Barcol hardness, DIN EN 59 40
Lowest working temperature (°C) 10
Maximum working temperature (°C) 30
Temperature resistance (°C) 140
Chemical Resistance
For detailed information about the chemical resistance please refer to Technical Information 210B.
Please refer to the column Oxydur- and Steulerflake series.
Substrate
Vinyl ester resin based Oxydur and Steulerflake-systems. The surface to be coated has to be dry, free of separating sub-
stances and impurities.
Please contact our application engineering for approval of the project-specific possible application.
Moisture
During application, the substrate must be kept absolutely dry. Uncured material has to be protected from any kind of
moisture (condensation, fog, precipitation or other water source). Distance to dew point has to be at least 3 K, at a relat-
ive humidity of above 70 % at least 5 K.
page 1 / 3
We master aggressive media
STEULER-KCH GmbH p Surface Protective Systems p Berggarten 1 p D-56427 Siershahn
Telefon: +49 (0) 2623 600-557 p Fax: +49 (0) 2623 600-623 p E-mail: sales-oss@steuler-kch.de p www.steuler-kch.de
Oxydur VE-AR TI 260
Issue 31|01|2017
Packaging / Shelf life
The products shall be stored and transported in a cool and dry place. Shelf life is specified for a storage temperature of
20 °C. Higher temperatures reduce, lower temperatures increase the shelf life.
Components Colour ap- Item number Package Content Shelf life
prox.
Oxydur-Accelerator D 5032007023 Can 2.5 kg 24 months
Oxydur-Hardener C 5032015007 Bottle 1 kg 12 months
Oxydur-VE-AR-Powder 5011114001 Bag 25 kg 24 months
Oxydur-VE-AR-Solution 5032019001 Hobbock 25 kg 6 months
Diluent M 5060006006 Can 10 kg 24 months
Mixing Ratio / Consumption
Oxydur VE-AR
Part by weight Part by volume
Oxydur-VE-AR-Solution 5.00 4.60
Oxydur-Hardener C 0.10 0.10
Oxydur-Accelerator D 0.10 0.10
Oxydur-VE-AR-Powder 13.75 6.40
Consumption approx. 2.3 kg/m²
Work steps 1
Layer thickness 1 mm
Working Times
The working times depend on the temperature and are as follows:
10 °C approx. 75 minutes
20 °C approx. 35 minutes
25 °C approx. 20 minutes
Safety measures
Mix and apply material only in well ventilated areas. Provide ventilation suited to the conditions when working in pits or
tanks. Do not smoke!
Do not expose materials to heat or open flame. This applies in particular to welding works (weld beads). Avoid direct con-
tact of the material with the skin. Wash hands with soap and water; do not clean the skin with solvents. Use barrier soap
and protective creams on exposed skin areas. In all other respects comply with the relevant regulations for prevention of
accidents.
Refer to the Safety Data Sheets!
GISCODE
Product GISCODE
Oxydur VE-AR SB-STY 20
Cleaning of Equipment
Working tools which are contaminated with not fully cured material can be cleaned with Steuler Universal Cleaner, Tech-
nical Information 190.
page 2 / 3
We master aggressive media
STEULER-KCH GmbH p Surface Protective Systems p Berggarten 1 p D-56427 Siershahn
Telefon: +49 (0) 2623 600-557 p Fax: +49 (0) 2623 600-623 p E-mail: sales-oss@steuler-kch.de p www.steuler-kch.de
Oxydur VE-AR TI 260
Issue 31|01|2017
All information contained in this Technical Information sheet is based on the present state of our knowledge and practical
experience. All data are approximate values for guidance only. A legally binding warranty of certain characteristics or the
suitability for a certain purpose of use cannot be derived from this.
The information given in this Technical Information sheet is our intellectual property. The Technical Information sheet
may neither be copied nor used by unauthorized parties, nor professionally distributed or otherwise made accessible to
third parties without our prior consent.
This issue replaces all previous versions.
page 3 / 3
We master aggressive media
STEULER-KCH GmbH p Surface Protective Systems p Berggarten 1 p D-56427 Siershahn
Telefon: +49 (0) 2623 600-557 p Fax: +49 (0) 2623 600-623 p E-mail: sales-oss@steuler-kch.de p www.steuler-kch.de
