Planmeca Proline CC

pan/ceph/Dimax3

SPARE-PARTS MANUAL
Publication part number 688036 En
Version 13
Published 2005-02
This manual of spare-parts and subassemblies is for the Planmeca Proline CC X-ray.

Always check Planmeca technical bulletins for the latest information on part modifi-
cations and changes before ordering spare-parts. This spare-parts manual will be pe-
riodically updated to include these modifications and changes.

Planmeca pursues a policy of continual product development. Although every effort

is made to produce up-to-date product documentation this publication should not be
regarded as an infallible guide to current specifications. We reserve the right to make
changes without prior notice.

COPYRIGHT PLANMECA HELSINKI FINLAND 2005

PUBLICATION PART NUMBER 688036 - VERSION 13

DATE ISSUED 2005-02

 Table of Contents

Chapter A PLANMECA PROLINE CC PANORAMIC X-RAY

1 COLUMN .............................................................................................................. A-2

1.1 Column and wall bracket ......................................................................................... A-2
1.2 Z-motor ................................................................................................................... A-3
1.3 Counter weight ......................................................................................................... A-4
1.4 Column signal spiral cable, new............................................................................... A-5
1.5 Column signal spiral cable, old ................................................................................ A-6
1.6 Main cable + spiral cable, new................................................................................. A-7
1.7 Main cable + spiral cable, old................................................................................... A-8
1.8 Exposure switch assembly....................................................................................... A-9
1.8.1 Exposure switch assembly, standard ........................................................... A-9
1.8.2 Exposure switch assembly, USA version ..................................................... A-10
2 Z-CARRIAGE ....................................................................................................... A-11
2.1 Z-carriage parts........................................................................................................ A-11
2.2 On/Off switch assembly ........................................................................................... A-12
3 LOWER SHELF ................................................................................................... A-13
3.1 Lower shelf casting and pcb .................................................................................... A-13
3.2 Patient positioning mechanism and focal trough laser............................................. A-14
3.2.1 Patient positioning mechanism parts 1 ......................................................... A-15
3.2.2 Patient positioning mechanism parts 2 ......................................................... A-16
3.2.3 Patient positioning mechanism parts 3 ......................................................... A-17
3.3 Cover and support holder ........................................................................................ A-18
3.4 Chin supports ........................................................................................................... A-19
3.5 Control console ........................................................................................................ A-20
4 UPPER SHELF .................................................................................................... A-21
4.1 Power supply and covers ......................................................................................... A-21
4.2 Guide block assembly .............................................................................................. A-22
4.3 Midsagittal plane laser ............................................................................................. A-23
5 ROTATING UNIT ................................................................................................. A-24
5.1 Rotating unit casting complete ................................................................................. A-24
5.1.1 Choke assembly ........................................................................................... A-24
5.1.2 Rotating part cable harness.......................................................................... A-25
5.2 Pcb‘s ........................................................................................................................ A-26
6 TUBE HEAD ........................................................................................................ A-27
6.1 Covers...................................................................................................................... A-27
6.2 Collimator assembly and tube head......................................................................... A-28
7 CASSETTE CARRIAGE ...................................................................................... A-29
7.1 Cover and frankfort laser ......................................................................................... A-29
7.2 Cassette driving mechanism .................................................................................... A-30
7.2.1 AEC slide frame assembly............................................................................ A-31
7.3 Cassette holder profile ............................................................................................. A-32
7.4 Casettes ................................................................................................................... A-33
7.4.1 Regular panoramic cassette,15x30 .............................................................. A-33
7.4.2 Autoprint cassette, 15x30 ............................................................................. A-34

Chapter B PLANMECA PROLINE CC CEPHALOSTAT CA AND CM

1 CEPHALOMETRIC UNIT ..................................................................................... B-2

1.1 Arm, covers and lamp assembly, CA ....................................................................... B-2
1.2 Arm and covers, CM ................................................................................................ B-3
1.3 Casing and attachment mechanism......................................................................... B-4
1.4 Head support assembly (pages B-5 and B-6) .......................................................... B-5
1.5 Ear post holder assemblies and nasial positioner holder assembly......................... B-6
1.6 Cassette holder, CA new ceph. ............................................................................... B-7
1.7 Cassette holder, CA ................................................................................................. B-8
1.8 Cassette holder, CM new ceph. ............................................................................... B-9
1.9 Cassette holder, CM ................................................................................................ B-10

Spare-Parts Manual TOC - 1

 Table of Contents

2 PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT .................................... B-11

2.1 Column..................................................................................................................... B-11
2.2 Z-carriage................................................................................................................. B-11
2.3 Upper shelf............................................................................................................... B-12
2.4 Rotating unit ............................................................................................................. B-12
2.5 Tube head ................................................................................................................ B-12
2.6 Cassette carriage ..................................................................................................... B-13
2.6.1 Cassette driving mechanism......................................................................... B-14
2.6.2 Cassette holder profile.................................................................................. B-15
2.6.3 Cassettes...................................................................................................... B-16

Chapter C TRANSVERSAL SLICING SYSTEM

1 HEAD SUPPORT ................................................................................................. C-2

1.1 Jaw positioner holder ............................................................................................... C-2
1.1.1 Positioner body assembly............................................................................. C-2
1.1.2 Carriage assembly........................................................................................ C-3
1.2 Patient positioner assembly ..................................................................................... C-4
2 OTHER PARTS .................................................................................................... C-5
2.1 Column..................................................................................................................... C-5
2.1.1 Wall bracket assembly.................................................................................. C-5
2.1.2 Lower bracket assembly ............................................................................... C-5
2.2 Lower shelf............................................................................................................... C-6
2.2.1 Keyboard processor...................................................................................... C-6
2.2.2 Support holder TR ........................................................................................ C-6
2.2.3 Patient positioning mechanism ..................................................................... C-7
2.3 Tube head ................................................................................................................ C-10
2.3.1 Primary slots TR ........................................................................................... C-10
2.4 Cassette carriage ..................................................................................................... C-10
2.4.1 Secondary slots TR ...................................................................................... C-10
2.4.2 Secondary radiation protection plate ............................................................ C-11
2.5 Rotating unit ............................................................................................................. C-11
2.5.1 Generator processor software ...................................................................... C-11
2.6 Patient positioning system ...................................................................................... C-12

Chapter D TRUE PROFILE TMJ

1 TRUE PROFILE TMJ PARTS .............................................................................. D-2

1.1 TMJ support complete ............................................................................................. D-2
1.2 Keyboard processor PCB ........................................................................................ D-3

Chapter E OPTIONAL FEATURES

1 FREE STANDING BASE ..................................................................................... E-2

2 CALIBRATION TOOLS ....................................................................................... E-3
3 TRANSPORTATION ACCESSORIES ................................................................. E-4
4 CARRYING HANDLES ........................................................................................ E-5
5 PM 240x300 CASSETTE CARRIAGE ................................................................. E-6
5.1 Cassette driving mechanism .................................................................................... E-7
5.2 Cassette holder profile ............................................................................................. E-8

Chapter F DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM

1 DIMAX3 ................................................................................................................ F-2

1.1 Dimax3 Proline panoramic connector ...................................................................... F-3
1.2 Dimax3 Proline fixed panoramic connector.............................................................. F-4
1.3 Dimax3 Proline fixed panoramic connector for pan/ceph units ................................ F-5

TOC - 2 Spare-Parts Manual

 Table of Contents

1.3.1 Z-carriage ..................................................................................................... F-6

1.4 Panoramic unit with cephalostat .............................................................................. F-7
1.4.1 Dimax3 Proline cephalostat connector ......................................................... F-7
1.4.2 Cephalostat mechanism frame ..................................................................... F-8
1.4.3 Cephalostat mechanism ............................................................................... F-9
1.4.4 Dimax3 Proline cephalostat sledges............................................................. F-10
1.4.5 Dimax3 Proline cephalostat 2nd primary collimator...................................... F-11
1.4.6 Column ......................................................................................................... F-12
1.4.7 Z-carriage ..................................................................................................... F-12
1.4.8 Tube head..................................................................................................... F-12
1.5 Dimax3 PCI interface cable...................................................................................... F-13
1.6 Keyboard processor PCB ........................................................................................ F-14
1.7 Generator processor PCB........................................................................................ F-15
1.8 PC accessories ........................................................................................................ F-16
1.9 Dimax2 alignment tools............................................................................................ F-16
2 DIMAX .................................................................................................................. F-17
2.1 Optical fibre cable .................................................................................................... F-17
2.2 Keyboard processor PCB ........................................................................................ F-18
2.3 Upper shelf cover ..................................................................................................... F-19
2.4 Guide block assembly .............................................................................................. F-20
2.5 Generator processor PCB........................................................................................ F-21
2.6 Sensor head............................................................................................................. F-22
2.7 Ceph model sensor head ......................................................................................... F-23
2.8 Transversal slicing system primary slots.................................................................. F-24
2.9 PC accessories ........................................................................................................ F-25
2.10 Dimax alignment tools.............................................................................................. F-25

Spare-Parts Manual TOC - 3

 Table of Contents

TOC - 4 Spare-Parts Manual

 Chapter

A PLANMECA PROLINE CC
PANORAMIC X-RAY

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A-1

COLUMN Column and wall bracket

1 COLUMN

1.1 Column and wall bracket

18

17

4
16
5
15
6 14
13
7
8 12
10

9 11

Ref Part no. Description Ref Part no. Description

1 00050123 Wall bracket assembly 13 00000400 Washer ø5.3/10x1 DIN 125A
2 00326025 Screw M4x5 DIN 7984 14 00003244 Washer ø4.3 DIN 6798
3 00006878 Cover plate 15 00002922 Screw M4x8 DIN 912
4A 00050848 Cable - length 2360mm 16 00001530 Label LBL-XU-002
4B 00662100 Cable - length 2260mm (Japan) 17 00665008 Stop magnet
5 00005999 Guide strip 18 00005463 Plate
6A 00005089 Column - length 2170mm
6B 00005087 Column - length 2070mm (Japan)
7 00001705 Grommet
8 00003141 Screw M6x6 DIN 916
9 00671037 Lower bracket assembly
10 00007498 Lower bracket
11 00050196 Base plate for column
12 00006552 Plug

A-2 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

COLUMN Z-motor

1.2 Z-motor

1
3 2
2

4
23

6 9
22
10 8
9
12
11
13

21
12

15
10
10
13 14
25

15 9
24 16
10

16
9
20
17

18
19

Ref Part no. Description Ref Part no. Description

1 00665333 Z-motor complete 15 00007622 Screw M6x30 DIN 912
2 00003094 Screw M8x16 DIN 912 16 00005919 Collar
3 00003120 Screw M8x12 DIN 913 17 00652459 Z-axle
4 00005060 Top cover 18 00637141 Z-motor cable, black
5 00007016 Cable tie holder 19 00637142 Z-motor cable, red
6 00326015 Screw M4x6 DIN 7984 20 00431300 Z-motor ITT/SWF 0225GMPG 24V~
7 00001490 Cable tie 21 00005063 Anchor block, right
8 00655144 Bearing block, left 22 00005061 Bearing block, right
9 00005303 Washer 23 00005058 Pulley wheel
10 00005069 Screw M5x5 DIN 916 24 00327023 Lock washer A6 DIN 6799
11 00005058 Pulley wheel 25 00327020 Lock washer A5 DIN 6799
12 00005065 Anchor plate
13 00005712 Cable pin
14 00005067 Anchor block, left

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A-3

COLUMN Counter weight

1.3 Counter weight

1 4

2 5

7
4
6

Ref Part no. Description

1 00005050 Pin
2A 00665002 Cable assembly - length 2135mm
2B 00665085 Cable assembly - length 1975mm
(Japan)
3 00000717 Washer ø12/18x0.5 DIN 988
4 00007451 Screw M8x12 DIN 913
5 00005054 Counter weight
6 00005051 Guide wheel
7 00005046 Axle

A-4 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

COLUMN Column signal spiral cable, new

1.4 Column signal spiral cable, new

4
5

5
7
4

Ref Part no. Description

1 00050878 Column signal spiral cable assembly
2 00005412 Connector BLH-8
3 00003660 Screw M4x8 DIN 7991
4 10010225 Nut
5 10010226 Damper
6 00326039 Screw M3x6 ULS
7A 00050870 Autoprint cable 5m (female/female)
7B 00050871 Autoprint cable 10m (female/female)
7C 10010207 Autoprint cable 5m (male(female)
7D 10010208 Autoprint cable 10m (male/female)
7E 10010209 Autoprint cable 1.4m (male/female)
7F 00637128 Autoprint cable 50m (male/female)
7G 10010212 Autoprint cable 15m (male(female)

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A-5

COLUMN Column signal spiral cable, old

1.5 Column signal spiral cable, old

1 2

Ref Part no. Description

1 00005412 Connector BLH-8
2 00003660 Screw M4x8 DIN 7991
3 00326039 Screw M3x6 ULS
4A 00050870 Autoprint cable 5m (female/female)
4B 00050871 Autoprint cable 10m (female/female)
4C 10010207 Autoprint cable 5m (male/female)
4D 10010208 Autoprint cable 10m (male/female)
4E 10010209 Autoprint cable 1.4m (male/female)
4F 00637128 Autoprint cable 50m (male/female)
4G 10010212 Autoprint cable 15m (male/female)
5 00000949 Strain reliefer

A-6 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

COLUMN Main cable + spiral cable, new

1.6 Main cable + spiral cable, new

1A

13
12

14 3
4
10
5
7
6
5
4
11
9 8

1B
2
5
3
4 6

14 5

4
9
L
L

8
N
N

7
10

15
11

Ref Part no. Description Ref Part no. Description

1A 00050821 Main cable+spiral cable 100-220V~ 14 00326039 Screw M3x6 ULS
1B 00050820 Main cable+spiral cable 220-240V~ 15 10010254 Main cable 220-230V~
2 00005085 Plate
3 00003660 Screw M4x8 DIN 7991
4 10010225 Nut
5 10010226 Damper
6 00006185 Black spiral cable 3x1
7 00005093 Cable plate
8 00006292 Insulation
9 00006277 Terminal block
10 00007011 Screw M3x14 DIN 7985
11 10006553 Damper
12 00006541 Cable 100-110V~
13 10004738 Power supply plug

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A-7

COLUMN Main cable + spiral cable, old

1.7 Main cable + spiral cable, old

1
1
2
2
3
3
4

4 5

5
13
6 9 6
4
4
10
10 14
4
7
7
8
8

1
11
1 15

12
16

17

Ref Part no. Description Ref Part no. Description

1 00000949 Strain reliefer 14 00007234 Strain reliefer
2 00005085 Plate 15A 00001039 Label 220V~ (LBL-X-009)
3 00003660 Screw M4x8 DIN 7991 15B 00001030 Label 117V~ (LBL-X-008)
4 00002798 Screw M3x20 DIN 84 15C 00007131 Label 100V~ (LBL-X-007)
5 00006185 Black spiral cable 3x1 16 00471002 Cable 100-117V~
6 00007011 Screw M3x14 DIN 7985 17 00471003 Strain reliefer set
7 00006277 Terminal block
8 00006292 Plate
9 00005093 Cable plate
10 00326039 Screw M3x6 ULS
11 00000942 Main cable 220-240V~
12A 00001039 Label 220-230V~ (LBL-X-009A)
12B 00001040 Label 240V~ (LBL-X-010)
13 00007265 Cable plate

A-8 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

COLUMN Exposure switch assembly

1.8 Exposure switch assembly

1.8.1 Exposure switch assembly, standard

5
3

7
1 2

9 6

11
10

Ref Part no. Description

11 00665093 Exposure switch assembly
2 00050877 Exposure switch frame assembly
3 00637007 Exposure control PCB
4 00471014 Exposure switch cable assembly
5 00438031 Switch assembly EAO 14.131
6 00006184 Spiral cable (cable only)
7 00650002 Switch holder
8 00524003 O-ring ø5.3x2.4
9 00006543 Led sleeve HLMP0103
10 00326018 Screw M3x6 DIN 912
11 00657001 X-ray remote control cover
1. See page A-10 for Exposure Switch Assembly, USA version

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A-9

COLUMN Exposure switch assembly

1.8.2 Exposure switch assembly, USA version

15

14

18 17 1
13

12

11 2
9 10 3

11 9 4
6 5
8
16

7
6

Ref Part no. Description Ref Part no. Description

1 00665159 Exposure switch assembly, USA 15 00655102 Adapter lower plate
2 00652520 Switch rubber 16 00471026 Exposure switch assembly kit, USA
3 00637130 Switch 17 00438031 Switch assembly EAO 14.131
4 00524003 O-ring ø5.3x2.4 18 00650002 Switch holder
5 00436008 Led sleeve
6 00326018 Screw M3x6 DIN 912
7 00657001 X-ray remote control cover
8 00003242 Washer ø3.2 DIN 6798
9 00652497 Plug, big
10 00006807 Screw M4x12 DIN 7984
11 00652498 Plug, small
12 00637007 Exposure control PCB
13 00637129 Exposure switch base USA
14 00655103 Adapter upper plate

A - 10 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

Z-CARRIAGE Z-carriage parts

2 Z-CARRIAGE

2.1 Z-carriage parts

3 11

4 1
5
14 15 16
6 10
13
2
17 18
7 9

8 19

3 11
4 14
15 15 16
16 14
5
17
10 18
7
9 17 20
18 14 21
18
12 15 25

19
16
26
18

17 24 18
28 18
27 22

23

Ref Part no. Description Ref Part no. Description

1 00669000 Upper carriage guide (supplied in 15 00005081 Screw M6x16 DIN 7984
pairs) 16 00003120 Screw M8x12 DIN 913
2 00669001 Lower carriage guide (supplied in 17 00371003 Cable tie
pairs) 18 00326026 Screw M4x8 DIN 7984
3 00671012 Guide roller 19 00005386 Cover strip+tape (not ceph.)
4 00002430 Screw M4x20 DIN 7985 20 00001559 Contact washer
5 00005076 Guide roller 21 00003244 Washer ø4.3 DIN 6798
6 00005079 Pulley wheel 22 00050849 Z-motor limit switch
7 00005078 Guide roller axle 23 00655020 Cover
8 00005075 Upper adjusting support 24 00326015 Screw M4x6 DIN 7984
9 00003545 Screw M4x4 DIN 916 25 00007016 Cable tie holder
10 00005077 Axle 26 00001490 Cable tie
11 00005856 Lock piece 27 00637140 Z-motor optional limit switch
12 00005083 Lower adjusting support 28 00665000 Z-carriage assembly (Includes ON/OFF
13 00655025 Z-carriage frame switch assembly, code 00665039,
14 00003001 Washer ø6.4/ø12.5 DIN 125 see page A-12 )

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 11

Z-CARRIAGE On/Off switch assembly

2.2 On/Off switch assembly

2
11 12

3
4

10

5
5

Ref Part no. Description

1 00653029 Switch insulation (small)+tape (code
12001)
2 00326015 Screw M4x6 DIN 7984
3 00005922 Bracket
4 00006293 Switch insulation (large)
5 00006357 Fuse holder-complete
6 00005384 Switch plate
7 00326026 Screw M4x8 DIN 7984
8 00006049 Switch
9A 00006319 Fuse 100-110V~ 15AT (USA, Japan)
9B 00001821 Fuse 220-240V~ 8AT
10 00050832 Connecting cable (brown)
11 00050831 Connecting cable (blue)
12 00665039 ON/OFF switch assembly

A - 12 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

LOWER SHELF Lower shelf casting and pcb

3 LOWER SHELF

3.1 Lower shelf casting and pcb

1
2

3
21

4
8 8
7
5 7 7
6 9
7
8 9

10

11
20

22
12 14
13 22
17
16
17
15

19

18

Ref Part no. Description Ref Part no. Description

1 00665070 Keyboard processor PCB 105-10-06 13 00655027 Lower shelf
2 00471087 Software (PK 3.75 or later with AEC) 14 00007508 Label (LBL-X-012)
3 00006272 PCB holder 15 00671027 Patient handle assembly (right)
4 00006807 Screw M4x12 DIN 7984 16 00655097 Patient handle (right)
5 00003244 Washer ø4.3 DIN 6798 17 00006672 Rubber of handle
6 00001559 Ground washer 18 00671028 Patient handle assembly (left)
7 00326230 Screw Ejot DG WN1552 4x6 19 00655096 Patient handle (left)
8 00001490 Cable tie 20 00624001 Plug
9 00007016 Cable tie holder 21 00050829 Layer light cable
10 00003003 Washer ø8.4/ø17 DIN 125 22 00007327 Screw M4x12 DIN 912
11 00007050 Screw M8x35 DIN 912
12 00007510 Label (LBL-X-011)

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 13

LOWER SHELF Patient positioning mechanism and focal trough laser

3.2 Patient positioning mechanism and focal trough laser

1A See pages A-15 ... A-17

See pages A-15 ... A-17 7 CAUTION 14

1B 6

LBL-X-099
LASER RADIATION -
DO NOT STARE
INTO BEAM
1mW CLASS II
2 635nm LASER
PRODUCT

3 15
2 AVOID
EXPOSURE-
Laser radiation
4 is emitted from

3 this aperture.
LBL-X-100

4
2
3
4 8
9

11
10
13
4 12

Ref Part no. Description Ref Part no. Description

1A 00671032 Pat. pos. mechanism - without motors 13 00671107 Mirror bracket
1B 00665004 Pat. pos. mechanism - with motors 14 00620102 Laser caution label, USA, LBL-X-099
2 00006334 Screw M5x12 DIN 7984 15 00620103 Laser warning label, USA, LBL-X-100
3 00007146 Washer ø5.3/ø15 DIN 9021
4 00007351 Rubber damper
5 00050124 Temple grip
6 00005851 Holder
7 00665104 P.A. cross-sectional temple supports
8 00326026 Screw M4x8 DIN 7984
9 00665330 Focal trough laser assembly
10 00007356 Screw M4x8 WN 1442
11 00002999 Washer ø4.3/9 DIN 125
12 00005393 Lamp bracket

A - 14 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

LOWER SHELF Patient positioning mechanism and focal trough laser

3.2.1 Patient positioning mechanism parts 1

1

4
5
3

7
6

9
8

17

14

13

12
11 10

15

16
18

18

11

Ref Part no. Description Ref Part no. Description

1 00002057 Screw M3x8 DIN 965 15 00005921 Chassis
2 00050730 Layer/Hold limits PCB 105-10-07 16 00665019 Pin
3 00050826 Layer limit card cable 17 00000161 Washer ø19/9x2.5
4 00005140 Spacer 18 00003000 Washer ø5.3/10 DIN 125
5 00005122 Axle, long
6 00000723 Circlip ø8 DIN 471
7 00005123 Axle, short
8 00005841 Support arm, right
9 00005235 Support arm, left
10 00007245 Sticker
11 00006334 Screw M5x12 DIN 7984
12 00002510 Screw M4x6 DIN 7991
13 00006622 Screw M5x10 DIN 7991
14 00665057 Holder block assembly

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 15

LOWER SHELF Patient positioning mechanism and focal trough laser

3.2.2 Patient positioning mechanism parts 2

2
3
5
4

4
5

19
7
6

20
8

14 16 17
15 18
9

10

11

12

13

Ref Part no. Description Ref Part no. Description

1 00665021 Temple support motor 14 00007604 Quadrant, right
2 00326018 Screw M3x6 DIN 912 15 00003388 Screw M4x16 DIN 933
3 00005132 Motor holder 16 00002999 Washer ø4.3/ø9 DIN 125
4 00005864 Rubber damper 17 00005985 Plate
5 00005137 Pivot screw 18 00000701 Washer ø8/ø14x0.5 DIN 988
6 00001490 Cable tie 19 00007345 Spring
7 00003254 Screw M4x20 DIN 912 20 00006426 Washer ø4/8x0.5 DIN 988
8 00007605 Quadrant, left
9 00005135 Motor shaft
10 00003138 Screw M4x4 DIN 916
11 00005136 Adjusting screw
12 00006524 Split pin ø4 DIN 94
13 00665020 Magnet holder assembly

A - 16 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

LOWER SHELF Patient positioning mechanism and focal trough laser

3.2.3 Patient positioning mechanism parts 3

14

13
15

7
8
9
6 12
3

6
11
10

4
2 5
1

16
6
17

11
18
19
20
21

Ref Part no. Description Ref Part no. Description

1 00326015 Screw M4x6 DIN 7984 14 00005143 Motor nut
2 00007016 Cable tie holder 15 00002923 Screw M4x14 DIN 912
3 00001490 Cable tie 16 00005703 Bearing
4 00006020 Pillar 17 00005144 Bearing housing
5 0002400 Nut M4 DIN 934 18 00003389 Washer ø6/ø12x1 DIN 988
6 00002999 Washer ø4.2/ø9 DIN 125 19 00006518 Screw M3x8 DIN 914
7 00665022 Patient positioning mechanism 20 00005222 Cog wheel
motor assy 21 00007352 Cogged belt
8 00003137 Screw M3x3 DIN 916
9 00005223 Drive wheel
10 00005148 Sleeve
11 00006520 Screw M4x6 DIN 912
12 00005147 Motor holder bracket
13 00005142 Traction screw

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 17

LOWER SHELF Cover and support holder

3.3 Cover and support holder

2
1A 3

1B
6

7
8
10
9

11

12
14
13

16
15

Ref Part no. Description Ref Part no. Description

1A 00671033 Support holder - with latch 13 00654011 Spring
1B 00665016 Support holder - without latch 14A 00007512 Label (LBL-X-013)
2 00626001 Screw M4x25 DIN 7984 14B 00003550 Label (LBL-X-043) (France only)
3 00627001 Washer ø4/ø8 DIN 988 15 00326009 Screw M4x60 DIN 912
4 00652187 Finger screw 16 00326008 Screw M4x50 DIN 912
5 00652176 Plate cover
6 00005226 Plate
7 00002510 Screw M4x6 DIN 7991
8 00005225 Fixing block
9 00004820 Ball latch M6x14 GN615
10 00665015 Latch block assy
11 00651509 Cover plate
12 00655026 Cover

A - 18 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

LOWER SHELF Chin supports

3.4 Chin supports

1 2

6
5

15 8

13 9
6 10
7 14
7

3
6

11
8 MECA
PLANsversal
LatTran
9

7 MECA
PLANsversal
LatTran

12
6
8 6

Ref Part no. Description Ref Part no. Description

1 00665013 Chin support complete 13 00002998 Washer ø3.2 DIN 125
2 00665014 Chin rest complete 14 00326014 Screw M4x16 ZN
3 00665103 P.A. cross-sectional chin support 15 00653209 Clearance plate
complete
4A 00005234 Bite piece
4B 00050956 Bag of 100 bite pieces
5 00005236 Support piece
6 00326040 Screw M4x8 ULS
7 00005231 Slide plate
8 00003326 Washer ø4.3/ø12 DIN 9021
9 00005238 Rest
10 00005237 Block
11 00652174 Block
12 00652173 Chin rest ruler

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 19

LOWER SHELF Control console

3.5 Control console

1B

P
2
3
C

ST
OP
P

11

5
6

7
10 2
3
10 C

17 8 15
16
ST
OP

13
12 14 10
5
6

7
1A
9
4
C

10 8
P

Ref Part no. Description Ref Part no. Description

1A 00665140 Control console 12 00665083 Stop button assy
1B 00665141 Control console with stop button 13 00671086 Stop button with label (LBL-X-089)
2 10007923 Keypad membrane PMK10504 14 00624000 Rubber damper
3 00326034 Screw M5x16 DIN 6912 15 10010542 Keypad housing and base plate, stop
4 10010541 Keypad housing and base plate 16 00007438 Fixing collar
5 10010202 Control panel cable 17 00050876 Switch
6A 00665078 Display/Keyboard 105-10-09
6B 10009458 Display/Keyboard 105-10-30
7 00007173 Fuse 1.6AT
8 00326018 Screw M3x6 DIN 912
9 00326005 Screw M4x10 DIN 7991
10 00050854 Ground lead
11 00655035 Housing - stop button

A - 20 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

UPPER SHELF Power supply and covers

4 UPPER SHELF

4.1 Power supply and covers

6 7

8
4

5 9
5
11

9 17
9 16
10 11
17 19
11 16 20
18 21
12
15
13

14

24
22

23

Ref Part no. Description Ref Part no. Description

1 00007510 Label LBL-X-011 8 00655029 Upper shelf casting
2 00005470 Cover 9 00007016 Cable tie holder
3 00003455 Insulation 10 00001490 Cable tie
4A 00471024 Low voltage power supply 105-10-05 11 00326230 Screw Ejot DG WN1552 4x6
100V~ 12 00005993 Filter
4B 00471023 Low voltage power supply 105-10-05 13 00326026 Screw M4x8 DIN 7984
110V~ 14 00050834 Power cable
4C 00471019 Low voltage power supply 105-10-05 15 00050833 Internal mains power cable
220-230V~ 16 00007050 Screw M8x35 DIN 912
4D 00471025 Low voltage power supply 105-10-05 17 00003003 Washer ø8.4/17 DIN 125
240V~ 18 00050854 Mains filter grounding cable
5 00002922 Screw M4x8 DIN 912 19 00001559 Ground washer
6A 00665025 Power supply complete 220-230V~ 20 00003244 Washer ø4.2 DIN 6798
6B 00665082 Power supply complete 240V~ 21 00006807 Screw M4x12 DIN 7984
6C 00665084 Power supply complete 100V~ 22 00655028 Cover
6A 00665046 Power supply complete 117V~ 23 00006992 Screw M4x20 DIN 912
7 00326040 Screw M4x8 ULS 24 00654011 Spring

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 21

UPPER SHELF Guide block assembly

4.2 Guide block assembly

4
7
8 5
6
1 9
22 10
11
21 22
7
6 3
21 5
20

20 12

13

23

14

15

16
16
17
17
18
18
19

Ref Part no. Description Ref Part no. Description

1 00665003 Guide block assembly 14 00665073 Crank assembly
2 10010801 Spring tension mechanism 15 00665075 Guide profile assembly
3 00000460 Connector 0-350766-1 16 00005302 Magnet holder
4 10002341 Connecting cable 17 00006267 Magnet
5 00001490 Cable tie 18 00005836 Screw M6x12 DIN 7984
6 00007016 Cable tie holder 19 00005120 Screw M6x45 DIN 7991
7 00326015 Screw M4x6 DIN 7984 20 00006332 Screw M4x12 DIN 7991
8 00005110 Nut 21 00654011 Spring
9 00000709 Washer ø18/25x1 22 00007209 Screw M8x25 DIN 912
10 00665076 Lock ring 23 00005113 Deflection spring axle
11 00665074 Cable guide assembly
12 00655104 Guide block
13 00665077 Wear strip

A - 22 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

UPPER SHELF Midsagittal plane laser

4.3 Midsagittal plane laser

CAUTION

LBL-X-099
LASER RADIATION -
DO NOT STARE
INTO BEAM
1mW CLASS II
635nm LASER
PRODUCT

10
AVOID
EXPOSURE- 9
Laser radiation
is emitted from
this aperture.
LBL-X-100
8
7
11

5 4

Ref Part no. Description

1 00001490 Cable tie
2 00002269 Cable tie holder
3 00007327 Screw M4x12 DIN 912
4 00665331 Midsagittal plane laser -complete
5 00050829 Layer light cable
6 00671107 Mirror bracket
7 00005468 Lamp bracket
8 00002999 Washer ø4.3/9 DIN 125
9 00326027 Screw M5x6 DIN 7984
10 00620102 Laser caution label, USA, LBL-X-099
11 00620103 Laser warning label, USA, LBL-X-100

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 23

ROTATING UNIT Rotating unit casting complete

5 ROTATING UNIT

5.1 Rotating unit casting complete

5.1.1 Choke assembly

12

15 4

14 13 11 5
10
9 6
16
8
17
7
18

19

18

17

20
21
22 23

Ref Part no. Description Ref Part no. Description

1 00665005 Rotating unit casting complete 12 00003585 Ring
Includes all parts shown in 13 00002922 Screw M4x8 DIN 912
pages A-24 ... A-25 14 00003322 Screw M6x12 DIN 7991
2 00005176 Counterprofile 15 00665042 Choke assembly
3 00655024 Casting 16 00326021 Screw M5x65 DIN 912
4 00000701 Washer ø8/14 17 00007146 Washer ø5.3/15 DIN 9021
5 00005186 Pin 18 00007351 Rubber damper
6 00665041 Guide bearing assembly 19 00050811 Choke L1 PMT10502
7 00005836 Screw M6x12 DIN 7984 20 00005187 Fixing plate
8 00005180 Motor pivot 21 00005199 Fixing spring
9 00003095 Screw M8x20 DIN 912 22 00002999 Washer ø4.3 DIN 125
10 00003003 Washer ø8.4/17 DIN125 23 00003092 Screw M4x8 DIN 933
11 00005110 Nut

A - 24 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

ROTATING UNIT Rotating unit casting complete

5.1.2 Rotating part cable harness

3
4

1
2

3 5
6 8
7 1
2

20
19
18

17
10

11

16
12
17
13

14
15

Ref Part no. Description Ref Part no. Description

1 00007016 Cable tie holder 15 00050844 Primary slot motor cable
2 00326230 Screw Ejot DG Wn 1552 4x6 16 00050856 Tubehead grounding wire
3 00001490 Cable tie 17 00326026 Screw M4x8 DIN 7984
4 00002269 Cable anchor 18 00050851 Rotating motor end sensor
5 00001559 Ground washer 19 00050843 Rotating motor cable
6 00003244 Washer ø4.3 DIN 6798 20 00050842 Cassette motor cable
7 00007327 Screw M4x12 DIN 912
8 00002299 Cable clamp
9 00050860 Rotating part cable harness
10 00050858 Cephalostat cable
11 00050837 Generator processor power cable
12 00050841 Fan cable
13 00050850 Rotating motor start sensor
14 00050845 Primary slot limit cable

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 25

ROTATING UNIT Pcb‘s

5.2 Pcb‘s

4
3 5
2 6
7
1

8 9

9 10

20 19
21
18
F

T
1 2

U
B
10 ,

E
F 3 22 PE R
2 1 0

P
0, 24
F

O
20

W
11 0

E
7 V

R
F 5

00 , 2 RF A

G
4 S
F 6

E
, 1 40 A ST =

N
S UP
F 7

E
17 V ST =
U E

R
F

A
V

T
O
=

R
15 A T

F
=
F

U
S
A
=

11
8 A

E
50 0 A FF

1.6 mA T

T ( ( 5 x 20 m m )

R
=
F E US

0 mA FF
2

A
( ,3 x 0 m
O ,

T
F FF

6,3 x 2 m m )
R R E

IN
IR

C E
O

G
6
O PL

T
8

x 32 m m )

S
N A

:
T C

32 m m )
8 1A T
IN E

5 2
A
U O

m m )
E N
D L

W TE IT

m )
( 5 x 20 m m

0
P Y

5 2
A CT H S

)
R W

(
T

x 0 m
R IO A
O

A
N N M

( 5 x 20
5 2
IN A E

x 0 m
G GA TYP

(
5

m
x
IN E

)
S A LB
T N
R D L-X
IS R

)
K A -00
O TIN 4/A
F G

17 12

16 13
14

15

Ref Part no. Description Ref Part no. Description

1A 00665062 Tube power generator 220/240V~ 8 00050839 Generator flat-cable
105-10-02 9 00006272 PCB holder
1B 00662051 Tube power generator 117V~ 10 00050840 Cassette head flat-cable
105-10-02 11 00665040 Rotation motor
1C 00665063 Tube power generator 100V~ 12 00003057 Washer ø6.4/12 DIN 137
105-10-02 13 00003326 Washer ø4.3/12 DIN 9021
2 00005372 F4,F5 - Fuse 8AFF 14 00006520 Screw M4x6 DIN 912
3A 00001821 F1 - Fuse 8AT 220/240V~ 15 00655023 Inner cover
3B 00006319 F1 - Fuse 15AT 100/117V~ 16 00005183 Spring
4 00005371 F6 - Fuse 1AT 17 00007509 Label (LBL-X-004A)
5 00000978 F7 - Fuse 4AT 18 00471064 Software (PG 2.25 or later with AEC)
6 00438057 F2 - Fuse 1.6A GMA 19 00665180 Generator processor 105-10-03
7A 00006317 F3 - Fuse 250mAT 220/240V~ 20 00326019 Screw M4x70 DIN 912
7B 00006318 F3 - Fuse 500mAT 100/117V~ 21 10000339 Step motor connection cable

A - 26 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

TUBE HEAD Covers

6 TUBE HEAD

6.1 Covers

2
5 See page A-24
1

6
8
7
3 9

10
4

See page A-28 2,5 mm

ION 2,5
AT LE
Al . Al
mm equ

TR TA
TO
L FIL
TA ION
TO TRAT
FIL

11

Ref Part no. Description

1 00326009 Screw M4x60 DIN 912
2 00665023 Cover and fan -complete
3 00007510 Label (LBL-X-011)
4 00007408 Screw M3x25 DIN 965
5 00665044 Cover assembly
6 00003159 Nut M3 DIN 934
7 10005433 Fan
8 00002922 Screw M4x8 DIN 912
9 00671065 Tube head cover complete
10 00620022 Label (LBL-X-048)
(Germany only)
11A 00620046 CC Proline label (LBL-X-073)
11B 10007452 Planmeca Proline CC label (LBL-D-002)

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 27

TUBE HEAD Collimator assembly and tube head

6.2 Collimator assembly and tube head

2 4
3
1
5

6
31

7
4

5
6

8
32
9

30
10
12 11

13
14 17
16 15
18
19 21
26 20 22
17
25
27 23

28
29 19
19 24

21

22

Ref Part no. Description Ref Part no. Description

1 10010517 Tube head TOSHIBA, includes cables 17 00326016 Screw M3x6 DIN 7991
10010470 and 10010471 18 00050735 Primary position detector 105-10-08
2 00003162 Nut M6 DIN 934 19 00006590 Screw M3x6 DIN 916
3 00003246 Washer ø6 DIN 6798A 20 00005160 Collimator flange
4 00327010 Washer ø5.3 DIN 127 21 00003451 Guide
5 00007146 Washer ø 5.3 DIN 9021 22 00326036 Screw M3x10 DIN 912
6 00326033 Screw M5x12 DIN 912 23 00005158 Primary slot carriage
7 00665006 Collimator assembly 24 00326026 Screw M4x8 DIN 7984
8 00005171 Primary slot (not ceph.) 25 00005862 Outer limiting slot
9 00326018 Screw M3x6 DIN 912 26 00050631 Collimator housing
10 00326043 Screw M3x30 DIN 912 27 00005156 Draw screw
11 00665024 Primary slot motor 28 00005167 Draw nut
12 00003370 Coupling 29 00005169 Metal tab
13 00003391 Screw M3x4 DIN 916 30 10000339 Step motor connection cable
14 00326005 Screw M4x10 DIN 7991 31 10010471 Adapter cable
15 00005166 Motor mounting bracket 32 10010470 Adapter cable
16 00003159 Nut M3 DIN 934

A - 28 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

CASSETTE CARRIAGE Cover and frankfort laser

7 CASSETTE CARRIAGE

7.1 Cover and frankfort laser

1
2

27 CAUTION

LBL-X-099
LASER RADIATION -
DO NOT STARE
INTO BEAM

28 1mW CLASS II
635nm LASER
PRODUCT

3 24 AVOID
6 EXPOSURE-
Laser radiation
4 is emitted from

7 this aperture.
LBL-X-100

23
22
25
21
20
5 26

6
7 19
9

17
8 18
10

See page A-30...A-32 16

11 15
14 13

12

Ref Part no. Description Ref Part no. Description

1 00665142 Cover assembly 13 00653052 Cover plate
2 00326039 Screw M3x6 ULS 14 00226002 Screw M3x12 DIN 916
3 00003108 Screw M4x10 DIN 7984 15 00653051 Slide plate
4 00006023 Washer 16 00001490 Cable tie
5 00007472 Screw M2.9x6.5 DIN 7981 17 00002269 Cable tie holder
6 00006807 Screw M4x12 DIN 7984 18 00671066 Plate+labels (LBL-X-077, LBL-D-001)
7 00002999 Washer ø4.3/9 DIN 125 19 00671031 Rear cover
8A 00665007 Cassette carriage complete 20 00006359 Washer ø3.2/9 DIN 9021
8B 00665037 Cassette carriage complete 21 00003159 Nut M3 DIN 934
- includes cassette (Autoprint, 22 00671017 Mirror bracket
see page A-34) 23 00652468 Bush
8C 00050896 Cassette carriage complete 24 00665329 Frankfort laser complete
- without motor, 25 00050838 Frankfort light cable
includes cassette (Autoprint, 26 00655059 Sheet lead
see page A-34)
27 00620102 Laser caution label, USA, LBL-X-099
9 00326040 Screw M4x8 Zn ULS
28 00620103 Laser warning label, USA, LBL-X-100
10 00655093 Cover plate
11 00665408 Rear cassette cover complete
12 00651001 Light hood

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 29

CASSETTE CARRIAGE Cassette driving mechanism

7.2 Cassette driving mechanism

35 5
1 6
33
24
NOTE!
Parts 19,25,26 are not
2 included in assembly
3 4 50896 in page A-29
AO
Y
25 NOTE!
EC
NM A
PLA -04
10
5-10

34
26
7 8
22
23
8 27
33
9
24
1
10
21 20
11
NOTE!
12 19
16
13 18

14 15 17
NOTE! 32 19
Parts 20,21 are not
included in assembly NOTE!
665007 in page A-29
31
30
29
19 18
17
28
36

Ref Part no. Description Ref Part no. Description

1 00326018 Screw M3x6 DIN 912 20 00326018 Screw M3x6 DIN 912 (Autoprint only)
2 00007226 Inner secondary slot 21 00661522 Labeling head (Autoprint only)
3 00326020 Screw M3x10 ISO 7380 22 00007370 Block
4 00050715 Cassette limits PCB 105-10-04 23 00626001 Screw M4x25 DIN 7984
5 00006634 Screw M4x10 DIN 913 24 00003143 Screw M4x6 DIN 916
6 00671087 Bearing block assembly ø10mm 25 00665050 Cassette motor
7 00002221 Spacer 26 00005288 Spring
8 00006335 Screw M4x16 DIN 7984 27 00655105 Cassette holder frame
9 00005263 Slide frame 28 00003297 Screw M6x12 DIN 7984
10 00005265 Plate 29 00006883 Locking screw (not ceph.)
11 00003660 Screw M4x8 DIN 7991 30 00665026 Stop magnet
12 00005267 Pin 31 00003366 Screw M8x35 DIN 913 (not ceph.)
13 00007201 Roller 32 00005269 Axle
14 00007171 O-ring 33 00327034 Washer ø3 DIN 125
15 00006005 Circlip ø4 DIN 471 34 10000339 Step motor connection cable
16 00005702 Bearing 35 00665059 Slide frame assembly
17 00001490 Cable tie 36 00003297 Screw M6x20 DIN 7984
18 00007016 Cable tie holder
19 00326015 Screw M4x6 DIN 7984

A - 30 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

CASSETTE CARRIAGE Cassette driving mechanism

7.2.1 AEC slide frame assembly

17
1 18
19
2

3 4
5

6 7
8
9
16
10
11
15
12
13 14

Ref Part no. Description Ref Part no. Description

1 10001295 AEC slide frame assembly 15 00005702 Bearing
2 00326020 Screw M3x10 ISO 7380 16 10001060 AEC cassette support
3 10001503 AEC sensor 17 00006634 Screw M4x10 DIN 913
4 10001065 Cassette limits PCB 105-10-04 18 00671087 Bearing block assembly ø10mm
5 00002221 Spacer 19 00003143 Screw M4x6 DIN 916
6 00326095 Screw M3x6 ISO 7380
7 00006335 Screw M4x16 DIN 7984
8 00005263 Slide frame
9 10001059 AEC support
10 00003660 Screw M4x8 DIN 7991
11 00005267 Pin
12 00007201 Roller
13 00007171 O-ring
14 00006005 Circlip ø4 DIN 471

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 31

CASSETTE CARRIAGE Cassette holder profile

7.3 Cassette holder profile

14
4 3

2 1
12 13
9
5

9
7

8 NOTE!
1
6 NOTE!
11 Parts 8,10 are not
included in assemblies
665037, 50896, 671077
9
10
NOTE!

Ref Part no. Description Ref Part no. Description

1 00003137 Screw M3x3 DIN 916 14 00671077 Cassette holder profile complete
2 00005245 Axle block
3 00005247 Spring
4 00326018 Screw M3x6 DIN 912
5 00005249 Slide axle ø10mm
6 00665027 Stop magnet
7 00005925 Cassette holder profile includes labels
(not ceph.)
8 00003485 Label (LBL-XA-002)(Autoprint only)
9 00326016 Screw M3x6 DIN 7991
10 00002189 Rubber pad (not autoprint)
11 00655060 End piece (not ceph.)
12 00005250 Lower guide strip
13 00005682 Friction strip

A - 32 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

CASSETTE CARRIAGE Casettes

7.4 Casettes

7.4.1 Regular panoramic cassette,15x30

INT
PR
TO
AU

cmcm
x 30
2

x 30
15 15
E
AR
IT HC
EW
DL
! .H AN
ION ICS
UT PT
CARE O
FIB
INS
TA
C ON
LE
VIBIC
DAET
ISP
OHM
C CT
AE

Ref Part no. Description

1 10001287 Cassette, Kodak Lanex Regular
2 10007201 Intesifying screen, Kodak Ektavision

Spare-Parts Manual Planmeca Proline CC Panoramic X-ray A - 33

CASSETTE CARRIAGE Casettes

7.4.2 Autoprint cassette, 15x30

1
INT
PR INS
TO ONTADLE
AU ICE C. HAN

30 cm
V S
DE IC

x cm
IS PT
TH R E O R E.
!
ION FIB H CA

15 x1530
UT WIT
CA

E
AR
HC
WIT
LE
ND
! . HA
ION ICS
UT PT
CARE O
S FIB
AIN
NT
EE CO
VIBICL
DAET
TO MP
HIS
CC
AE

2
Autoprintkass 1298A.eps

Ref Part no. Description

1 10001288 Autoprint cassette, Kodak Lanex Regular
2 10007201 Intesifying screen, Kodak Ektavision
3 00665170 Printhead cover new cassette

A - 34 Planmeca Proline CC Panoramic X-ray Spare-Parts Manual

 Chapter

B PLANMECA PROLINE CC
CEPHALOSTAT CA AND CM

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B-1

CEPHALOMETRIC UNIT Arm, covers and lamp assembly, CA

1 CEPHALOMETRIC UNIT

1.1 Arm, covers and lamp assembly, CA

1 1

2
3 10 CAUTION 32

LBL-X-099
LASER RADIATION -

1 9 DO NOT STARE

31 1mW
INTO BEAM
CLASS II
8 12 635nm LASER
PRODUCT

7 11
4 AVOID

6
EXPOSURE-
Laser radiation
is emitted from
33
this aperture.
LBL-X-100

13 20
5
31
14 13 15
15
17 19
16
6 18 21 22
30
22
29

23

24 25
26
27

28

Ref. Part no. Description Ref. Part no. Description

1 00326040 Screw M4x8 ULS 19 00665332 Soft tissue filter positioning laser
2 00655076 Attachment casting cover complete
3 00655078 Attachment mechanism cover 20 00665332 Soft tissue filter positioning laser
4 00655077 Upper cover assembly
5 00003094 Screw M8x16 DIN 912 21 00652468 Ceph. positioning light bushing
6 00006742 Washer ø8 DIN127 22 00006623 Screw M3x4 DIN 915
7 00001814 Screw M8x12 DIN 912 23 00652227 Light adjustment piece
8 00003099 Screw M8x40 DIN 912 24 00653104 Fixing plate
9 00002592 Screw M8x40 DIN 916 25 00653105 Slide plate
10 00652344 Support piece 26 00652226 Light hood
11 00655073 Cephalostat arm 27 00226002 Screw M3x12 DIN 916
12 00655072 Adapter 28 00671107 Mirror bracket
13 00006627 Screw M8x14 DIN 7991 29 00652231 Lever
14A 00637120 Ceph-interconnection cable 30 00006426 Washer ø4 DIN 988
14B 10001760 Digital cephalo arm cable 31A 00620047 Label LBL-X-075
15 00006520 Screw M4x6 DIN 912 31B 10002655 Label LBL-X-111
16 00637017 Ceph. control PCB 105-10-24 32 00620102 Laser caution label, USA, LBL-X-099
17 00003159 Nut M3 DIN 934 33 00620103 Laser warning label, USA, LBL-X-100
18 00006359 Washer ø3 DIN 9021

B-2 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

CEPHALOMETRIC UNIT Arm and covers, CM

1.2 Arm and covers, CM

1 1

2
3

9
8
1
7
11 17
5 10
4

12
12

16 17

13

6 14

15

Ref. Part no. Description Ref. Part no. Description

1 00326040 Screw M4x8 ULS 15 00655082 Cover plate
2 00655076 Attachment casting cover 16 00003094 Screw M8x16 DIN 912
3 00655078 Attachment mechanism cover 17A 00620048 Label LBL-X-076
4 00655077 Upper cover 17B 10002655 Label LBL-X-111
5 00001814 Screw M8x12 DIN 912
6 00006742 Washer ø8 DIN127
7 00003099 Screw M8x40 DIN 912
8 00002592 Screw M8x40 DIN 916
9 00652344 Support piece
10 00655073 Cephalostat arm
11 00655072 Adapter
12 00006627 Screw M8x14 DIN 7991
13 00003159 Nut M3 DIN 934
14 00006359 Washer ø3 DIN 9021

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B-3

CEPHALOMETRIC UNIT Casing and attachment mechanism

1.3 Casing and attachment mechanism

1
2
3
4 4
5
6
7
9
12

10
8
11
12
16
15 14
13
8
15

17
18

21 19
20
26
15 23

22
24
15
25

Ref. Part no. Description Ref. Part no. Description

1 00004878 Screw M6x16 DIN 912 18 00622001 Bearing ball ø8
2 00003001 Washer ø6 DIN 125 19A 00620047 Proline ceph label (LBL-X-075 CA)
3 00326124 Screw M6x30 DIN 913 19B 00620048 Proline ceph label (LBL-X-076 CM)
4 00006645 Screw M6x20 DIN 913 20A 10007457 Planmeca proline ceph label
5 00653108 Flange (LBL-D-007 CA)
6 00654022 Spring 21B 10007458 Planmeca proline ceph label
7 00652192 Axle (LBL-D-008 CM)
8 00652336 Spacer 20 00657006 Casing
9 00622014 Joint axle JAM 6 21 00007086 Screw M6x16 DIN 7991
10 00003162 Nut M6 DIN 934 22 00652218 Cassette holder support rod
11 00652335 Alignment bar 23 00665139 Inner support bar
12 00003182 Screw M6x25 DIN 912 24 00652217 Outer support bar
13 00622015 Joint axle JAML 6 25 00004849 Screw M4x10 DIN 912
14 00652193 Fixing plate
15 00003138 Screw M4x4 DIN 916
16 00655071 Casting
17 00654021 Spring

B-4 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

CEPHALOMETRIC UNIT Head support assembly (pages B-5 and B-6)

1.4 Head support assembly (pages B-5 and B-6)

21
20
17
19
18 22
7 15 16
10
8
14
9 13
8 11
23
12 24
7 1
25
21
17 14 6
20 24 26 15
14 13 5 34
16 27
15 13 22
18
22 2 33 3
18

22 4
28
32
19
29

30
31

30

Ref. Part no. Description Ref. Part no. Description

1 00665136 Head support assembly 18 00124001 Rubber pad
2 00651003 Ear post, right (ring) 19 00652199 Ear post outer bracket
3 00651004 Nasial positioner 20 00652206 Belt roller
4 00004878 Screw M6x16 DIN 912 21 00652207 Belt roller axle
5 00655087 Rotation scale 22 00003138 Screw M4x4 DIN 916
6 00007237 Washer ø6/18x0.5 DIN 2093 23 00671061 Ear post inner bracket assy, left
7 00004849 Screw M4x10 DIN 912 24 00652200 Ear post axle
8 00652201 Rod 25 00652211 Nasial positioner rod
9 00650518 Cogged belt 26 00652210 Nasial positioner axle
10 00326016 Screw M3x6 DIN 7991 27 00671062 Nasial positioner inner bracket
11 00653197 Deal frame 28 00652209 Nasial positioner outer bracket
12 00665131 Centre assembly 29 00655075 Cover
13 00006426 Washer ø4/8x0.5 DIN 988 30 00003660 Screw M4x8 DIN 7991
14 00005702 Ball bearing NSK 62422 31 00622008 Needle roll
15 00003108 Screw M4x10 DIN 7984 32 00671060 Ear post inner bracket assy, right
16 00652208 Belt fastener 33 00007612 Washer ø6 DIN 6798
17 00003324 Screw M4x16 DIN 7991 34 00651005 Ear post, left (ball)

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B-5

CEPHALOMETRIC UNIT Ear post holder assemblies and nasial positioner holder

1.5 Ear post holder assemblies and nasial positioner holder assembly

2
3
1

4 5

7
8

16
10

16 16

11
12
13

15 16
14

16

Ref. Part no. Description Ref. Part no. Description

1 00004849 Screw M4x10 DIN 912 12 00002060 Screw M4x8 DIN 916
2 00002778 Screw M2x6 DIN 84 13 00665138 Nasial positioner holder assembly
3 00002057 Screw M3x8 DIN 965 14 00001516 Bearing ball ø6
4 00654019 Spring 15 00654020 Spring
5 00626001 Screw M4x25 DIN 7984 16 00622000 Needle roll
6 00655092 Soft tissue filter scale, CM
7 00326121 Screw M4x6 ULS
8 00652220 Spacer
9 00653221 Lever plate
10 00665137 Ear post holder assembly
11 00652214 Extension piece

B-6 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

CEPHALOMETRIC UNIT Cassette holder, CA new ceph.

1.6 Cassette holder, CA new ceph.

2
1
3

2 6

5
4

M4x8 9
BN 5950
8
22
10
22 6

11

23 12

13
15 11
16
14
17
18
19 15
20
21 16
Kasetinpidin CA1298A.eps

17
20
M4x4 DIN 7985 18
19

Ref. Part no. Description Ref. Part no. Description

1A 00665186 Cassette holder 8”x10” CA 15 00002048 Screw M2x10 Zn DIN 84
1B 00665188 Cassette holder 18cm x 24cm CA 16 00653118 Micro switch plate
2 00003108 Screw M4x10 DIN 7984 17 00652222 Cassette stop
3 00665144 Spring plate 18 00654018 Spring
4 00326005 Screw M4x10 DIN 7991 19 00622000 Needle roll
5A 00655165 Plate 8”x10” CA 20 00652223 Cassette holder axle
5B 00655166 Plate 18cm x 24cm CA 21A 00653215 Support strip 8”x10” CA
6 00003660 Screw M4x8 Zn DIN 7991 21B 00653216 Support strip 18cm x 24cm CA
7 00652224 Cassette clip 22 00124001 Rubber pad
8 00652225 Cassette holder plastic spring 23A 00665182 Ceph-cover 8”x10” CA
9 00656004 Bracket 23B 00665184 Ceph-cover 18cm x 24cm CA
10 00326018 Screw M3x6 Zn DIN 912
11 00002269 Anchor
12 00004849 Screw M4x10 Zn DIN 912
13 00002999 Washer ø4.3 Zn DIN 125
14 00637119 Ceph-switch cable

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B-7

CEPHALOMETRIC UNIT Cassette holder, CA

1.7 Cassette holder, CA

1 2
3

2
5 6

22 8

10
22
6

11

12

13

15 11
16
14

18 17
19 15
20
21 16
17
20
19 18

Ref. Part no. Description Ref. Part no. Description

1A 00665134 Cassette holder 8”x10” CA 13 00002999 Washer ø4.3 Zn DIN 125
1B 00665132 Cassette holder 18cm x 24cm CA 14 00637119 Ceph-switch cable
2 00003108 Screw M4x10 DIN 7984 15 00002048 Screw M2x10 Zn DIN 84
3 00665144 Spring plate 16 00653118 Micro switch plate
4 00326005 Screw M4x10 DIN 7991 17 00652222 Cassette stop
5A 00671068 Plate 8”x10” CA 18 00654018 Spring
5B 00671067 Plate 18cm x 24cm CA 19 00622000 Needle roll
6 00003660 Screw M4x8 Zn DIN 7991 20 00652223 Cassette holder axle
7 00652224 Cassette clip 21A 00655084 Support strip 8”x10” CA
8 00652225 Cassette holder plastic spring 21B 00655083 Support strip 18cm x 24cm CA
9 00655079 Bracket 22 00124001 Rubber pad
10 00326018 Screw M3x6 Zn DIN 912
11 00002269 Anchor
12 00004849 Screw M4x10 Zn DIN 912

B-8 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

CEPHALOMETRIC UNIT Cassette holder, CM new ceph.

1.8 Cassette holder, CM new ceph.

2
3
1

2
6
4 5

M4x8 9
BN 5950
15
6
8

14
10

15
11

12

13
Kasetinpidin CM1298A.eps

M4x4 DIN 7985

Ref. Part no. Description Ref. Part no. Description

1A 00665185 Cassette holder 8”x10” CM 13A 00653217 Support strip 8”x10” CM
1B 00665187 Cassette holder 18cm x 24cm CM 13B 00653218 Support strip 18cm x 24cm CM
2 00003108 Screw M4x10 DIN 7984 14 00124001 Rubber pad
3 00665144 Spring plate 15A 00665183 Ceph-cover 8”x10” CM
4 00326005 Screw M4x10 DIN 7991 15B 00665189 Ceph-cover 18cm x 24cm CM
5A 00655163 Plate 8”x10” CM
5B 00655164 Plate 18cm x 24cm CM
6 00003660 Screw M4x8 Zn DIN 7991
7 00652224 Cassette clip
8 00652225 Cassette holder plastic spring
9 00656004 Bracket
10 00326018 Screw M3x6 Zn DIN 912
11 00004849 Screw M4x10 Zn DIN 912
12 00002999 Washer ø4.3 Zn DIN 125

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B-9

CEPHALOMETRIC UNIT Cassette holder, CM

1.9 Cassette holder, CM

1 3

2
6
5
4

15 8

10

15
6

11

12

14

13

14

Ref. Part no. Description Ref. Part no. Description

1A 00665135 Cassette holder 8”x10” CM 13A 00655085 Support strip 8”x10” CM
1B 00665133 Cassette holder 18cm x 24cm CM 13B 00655086 Support strip 18cm x 24cm CM
2 00003108 Screw M4x10 DIN 7984 14 00650519 Cassette stop
3 00665144 Spring plate 15 00124001 Rubber pad
4 00326005 Screw M4x10 DIN 7991
5A 00671070 Plate 8”x10” CM
5B 00671069 Plate 18cm x 24cm CM
6 00003660 Screw M4x8 Zn DIN 7991
7 00652224 Cassette clip
8 00652225 Cassette holder plastic spring
9 00655079 Bracket
10 00326018 Screw M3x6 Zn DIN 912
11 00004849 Screw M4x10 Zn DIN 912
12 00002999 Washer ø4.3 Zn DIN 125

B - 10 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT Column

2 PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT

2.1 Column

5
6

1
7

Ref. Part no. Description Ref. Part no. Description

1 00006882 Ceph counterweight 5 00003141 Screw M6x6 DIN 916
2 00326022 Screw M8x55 DIN 7984 6 00007498 Lower bracket
3 00671058 Lower bracket assembly 7 00327039 Expansion anchors
4 00003097 Screw M8x55 DIN 912 Zn

2.2 Z-carriage

1
1
2

Ref. Part no. Description Ref. Part no. Description

1 00655080 Cover strip 2 00655081 Cover strip

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B - 11

PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT Upper shelf

2.3 Upper shelf

Ref. Part no. Description Ref. Part no. Description

1 00006858 Locking latch 2 00002922 Screw M4x8 DIN 912

2.4 Rotating unit

Ref. Part no. Description Ref. Part no. Description

1 00665190 Locking motor (NOTE! Needs new 2 00002922 Screw M4x8 DIN 912
generator processor 105-10-03C or later,
code 0665180 and software PG 2.01 or
later)
2.5 Tube head

Ref. Part no. Description Ref. Part no. Description

1A 00007023 Ceph. primary aperture 18cm x 24cm 2 00006834 Ceph. primary slot
1B 00007459 Ceph. primary aperture 8”x10”

B - 12 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT Cassette carriage

2.6 Cassette carriage

Ref. Part no. Description Ref. Part no. Description

1A 00665036 Cephalometric cassette carriage 1D 00050897 Cephalometric cassette carriage
complete complete
see pages B-14...B-15 see pages B-14...B-15
1B 00050899 Cephalometric cassette carriage - without motor
complete - includes cassette
- without motor (autoprint, see page A-34)
see pages B-14...B-15
1C 00665038 Cephalometric cassette carriage
complete
see pages B-14...B-15
- includes cassette
(autoprint, see page A-34)

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B - 13

PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT Cassette carriage

2.6.1 Cassette driving mechanism

37 27
6 NOTE!
5 Parts 19, 28, 29 are not
2 3 includedin assemblies
0050899 and 00050897
4 in page B-13
28
40
EC
AO
Y

7 29
NM
PLA10-04
10
5-
A

20
22 23 24 23
37 38
8 27
25
1 9 30 39
26
10 1
20 19
11 21 18
12 31
NOTE! 17
13 19
Parts 1, 22 are not included 35
in assemblies 00665036 and 14 36
00050899 in page B-13 16
15 32
39 30 33
31

19 26
18 34
41

Ref. Part no. Description Ref. Part no. Description

1 00326018 Screw M3x6 DIN 912 22 00661522 Labeling head (Autoprint only)
2 00007226 Inner secondary slot 23 00002400 Nut M4 DIN 934
3 00326036 Screw M3x10 DIN 912 24 00007370 Block
4 00050715 Cassette limits PCB 105-10-04 25 00626001 Screw M4x25 DIN 7984
5 00006634 Screw M4x10 DIN 913 26 00007016 Base
6 00671087 Bearing block assembly ø10mm 27 00003143 Screw M4x6 DIN 916
7 00002221 Spacer ø6/4.1x4 28 00665050 Cassette motor
8 00006335 Screw M4x16 DIN 7984 29 00005288 Spring
9 00005263 Slide frame 30 00003132 Screw M5x8 DIN 915
10 00005265 Plate 31 00665026 Stop magnet
11 00003660 Screw M4x8 DIN 7991 32 00007371 Positioning screw holder (ceph)
12 00005267 Pin 33 00003003 Washer ø8.4/17 DIN 125
13 00007201 Roller 34 00003297 Screw M6x12 DIN 7984
14 00007171 O-ring 7x3 35 00005269 Axle
15 00006005 Circlip ø4 DIN 471 36 10004223 M224c-24V- solenoid assembly (ceph)
16 00005702 Bearing 37 00327034 Washer ø3 DIN 125
17 00002999 Washer ø4.3/9 DIN 125 38 00655105 Cassette holder frame
18 00001490 Cable tie 39 00005069 Screw M5x5 DIN 916
19 00326015 Screw M4x6 DIN 7984 40 10000339 Step motor connection cable
20 00007353 Positioning magnet C12-00 (ceph) 41 00003297 Screw M6x20 DIN 7984
21 00004849 Screw M4x10 DIN 912

B - 14 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT Cassette carriage

2.6.2 Cassette holder profile

16 3
4

2 1
15
14
5
9

9
7
1
6
13 9
8

10 NOTE!
11 1 Part 8 is not included in
12 assemblies 00665036, 00050899, 00671078

Ref. Part no. Description Ref. Part no. Description

1 00003137 Screw M3x3 DIN 916 15 00005682 Friction strip
2 00005245 Axle block 16 00671078 Cassette holder profile complete
3 00005247 Spring
4 00326018 Screw M3x6 DIN 912
5 00005249 Slide axle ø10mm
6 00665027 Stop magnet
7 00007059 Cassette holder profile
8 00003485 Label (LBL-XA-002)(Autoprint only)
9 00326016 Screw M3x6 DIN 7991
10 00326015 Screw M4x6 DIN 7984
11 00002999 Washer ø4.3/9 DIN 125
12 00007002 Soft tissue piece
13 00007058 Short end piece
14 00005250 Lower guide strip

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray B - 15

PARTS TO PANORAMIC UNIT WITH CEPHALOSTAT Cassette carriage

2.6.3 Cassettes

Ref. Part no. Description

1 10005805 Cassette, XMT Leadless LX Reg C2
(18x24)
2 10005806 Cassette XMT Leadless LX Reg C2
(8”x10”)

B - 16 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

 Chapter

C TRANSVERSAL SLICING SYSTEM

• Transversal slicing system retrofit kit, code 665105

for Planmeca Proline CC Panoramic x-ray units
NOTE!
The retrofit kit includes parts:
- all parts pages C-2...C-4,
- parts 2, 4 and 7 page C-5,
- all parts page C-6,
- part 1 page C-7,
- all parts pages C-10...C-12

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray C-1

TRANSVERSAL SLICING SYSTEM HEAD SUPPORT

1 HEAD SUPPORT

1.1 Jaw positioner holder

1.1.1 Positioner body assembly

15
10
5
+
0
-
5
10
L/

15
G

02
-0
T
X
L-
LB
1
R
/D

25

24
2
23 4 3
15
10
5
+
0
-
5
10
L/

15
G

02
-0
T
X
L-
LB
R
/D

22
3 4
12
17
5
4
3
15 6
16 7
14
21
13 8
3
12 9
11
10
18
20

19 3

Ref Part no. Description Ref Part no. Description

1 00653093 Angle plate 16 00652178 Latch button
2 00622005 Slide bearing 17 00654000 Spring
3 00003391 Screw M3x4 DIN 916 18 00652169 Positioner body
4 00622003 Slide bearing 19 00326026 Screw M4x8 DIN 7984
5 00652152 Turning shaft 20 00327021 Washer ø4.3 DIN 127
6 00000701 Washer ø8/14x0.5 DIN 988 21 00005231 Slide plate
7 00006427 Washer ø8/14x0.3 DIN 988 22 00652165 Right centering knob
8 00007083 Washer ø8/14x0.2 DIN 988 23 00620032 Label LBL-XT-002
9 00000723 Circlip A8 DIN 471 24 00652157 Angle wheel
10 00652166 Left centering knob 25 00671056 Positioner body assembly
11 00003462 Washer ø6/12x0.3 DIN 988
12 00652164 Centering screw
13 00652163 Guide shaft
14 00652160 Turning knob
15 00653119 Washer ø13/4.5x0.5

C-2 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

TRANSVERSAL SLICING SYSTEM HEAD SUPPORT

1.1.2 Carriage assembly

2
19
20
12
3
16
18
4

17
5

16
6
21 15

7
14
13
12
11

10

22

Ref Part no. Description Ref Part no. Description

1 00652155 Sheave 15 00652156 Power shaft
2 00652154 Free shaft 16 00622004 Slide bearing
3 00622006 Ball bearing 17 00654014 Spring
4 00622000 Needle roll 18 00652150 Rocker
5 00327041 Circlip A3.2 DIN 6799 19 00652161 Power wheel
6 00652149 Carriage 20 00656007 Sight plate assy
7 00652151 Bottom plate 21 00627006 Screw GN 615 M4K
8 00627005 Screw GN 615 M8K 22 00671053 Carriage assembly
9 00326005 Screw M4x10 DIN 7991
10 00003391 Screw M3x4 DIN 916
11 00652160 Turning knob
12 00000722 Circlip A6 DIN 471
13 00003462 Washer ø6/12x0.3 DIN 988
14 00002488 Washer ø6/12x0.5 DIN 988

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray C-3

TRANSVERSAL SLICING SYSTEM HEAD SUPPORT

1.2 Patient positioner assembly

14

12
2

10
3
16
13
11
10 12
16

4 5
6 9
5
6
15

7 8

Ref Part no. Description Ref Part no. Description

1 00665531 Bite registration plate set 12 00665519 Temple support
(10 pcs. holders and 50 pcs. plates) 13 00005851 Holder
2 00652170 Top cover 14 00002512 Screw M4x8 DIN 7991
3 00653092 Side support bar -pair 15 00671055 Patient positioner assembly
4 00650005 Bumper 16 00005056 Screw M6x8 DIN 916
5 00652159 Screw
6 00002488 Washer ø12/6x0.5 DIN 988
7 00003294 Screw M4x20 DIN 7984 Zn
8 00626006 Screw M4x12 DIN 913
9 00652153 U-profile
10 00652158 Locking pin
11 00654012 Spring

C-4 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2 OTHER PARTS

2.1 Column

2.1.1 Wall bracket assembly

2.1.2 Lower bracket assembly

3 4
5
2
6

7 9

10

Ref Part no. Description Ref Part no. Description

1 00671057 Wall bracket complete 7 00671058 Lower bracket assembly
2 00006964 Screw M6x20 DIN 7991 8 00003097 Screw M8x55 DIN 912 Zn
3 00006831 Wall plate 9 00007498 Lower bracket
4 00655070 Wall bracket 10 00327039 Expansion anchors
5 00003141 Screw M6x6 DIN 916
6 00006829 Clamp plate

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray C-5

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2.2 Lower shelf

2.2.1 Keyboard processor

3
2

Ref Part no. Description Ref Part no. Description

1 00665070 Keyboard processor PCB 105-10-06 3 00637019 Lock key TR
2 00471087 Software
2.2.2 Support holder TR
2 3

1 5
6
7
4

8
10
9
11

Ref Part no. Description Ref Part no. Description

1 00671033 Support holder - with latch 7 00005226 Plate
2 00626001 Screw M4x25 DIN 7984 8 00002050 Screw M4x6 DIN 7991 Zn
3 00627001 Washer ø4/8x0.1 DIN 988 9 00665015 Latch block assembly
4 00665521 Support holder -without latch 10 00005225 Fixing block
5 00652176 Plate cover 11 00004820 Ball latch M6x14 GN615
6 00652187 Finger screw

C-6 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2.2.3 Patient positioning mechanism

2.2.3.1 Trans arm pair

17

16
21
18
1
15 19

2
20
3
14

5
6
7
8
9

10

22
13
11
12

12 23
11

Ref Part no. Description Ref Part no. Description

1 00665522 Trans arm pair 15 00050826 Layer limit card cable
2 00654015 Trans arm, right 16 00050730 Layer/Hold limits PCB105-10-07
3 00654016 Trans arm, left 17 00002057 Screw M3x8 DIN 965
4 00652167 Sleeve 18 00005140 Spacer
5 00654017 Spring 19 00005122 Axle, long
6 00002998 Washer ø3.2/7 DIN 125 20 00005123 Axle, short
7 00326095 Screw M3x6 ULS 21 00665101 Patient positioning mechanism
8 00000701 Washer ø8/14x0.5 Including all parts shown in pages
9 00006622 Screw M5x10 DIN 7991 C-7...C-9
10 00002510 Screw M4x6 DIN 7991 22 00007245 Sticker
11 00001497 Screw M5x10 DIN 7984 Zn 23 00005921 Chassis
12 00003000 Washer ø5.3/10 DIN 125
13 00665019 Pin
14 00665057 Holder block assembly

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray C-7

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2.2.3.2 Temple support motor

2 3
5
4

4
5

22 20
21

19
17
8 7 6
18 9
16

15 14 10
13

12

11

Ref Part no. Description Ref Part no. Description

1 00665021 Temple support motor 15 00003138 Screw M4x4 DIN 916
2 00326018 Screw M3x6 DIN 912 16 00665051 Shaft assembly
3 00005132 Motor holder 17 00007605 Quadrant, left
4 00005864 Rubber damper 18 00007604 Quadrant, right
5 00005137 Pivot screw 19 00006426 Washer ø4/8x0.5 DIN 988
6 00000701 Washer ø8/14x0.5 20 00007345 Spring
7 00665053 Plate assembly 21 00003254 Screw M4x20 DIN 912
8 00002999 Washer ø4.3/9 DIN 125 22 00001490 Cable tie
9 00003388 Screw M4x16 DIN 933
10 00005130 Releasing lever
11 00665020 Releasing lever assembly
12 00006524 Split pin A4 DIN 94
13 00005136 Adjusting screw
14 00005135 Motor shaft

C-8 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2.2.3.3 Patient positioning mechanism motor

15

14

16
13

7 8
4
6 9
5 12

6
11
10

6 17
3
2
1
18

19

20 11

21
22
23

Ref Part no. Description Ref Part no. Description

1 00326015 Screw M4x6 DIN 7984 14 00005142 Traction screw
2 00007016 Base 15 00005143 Motor nut
3 00006020 Pillar 16 00002923 Screw M4x14 DIN 912
4 00001490 Cable tie 17 00005921 Chassis
5 00002400 Nut M4 DIN 125 18 00005703 Bearing
6 00002999 Washer ø4.2/9 DIN 125 19 00005144 Bearing housing
7 00665022 Patient positioning mechanism 20 00003389 Washer ø6.2/12 DIN 988
motor assembly 21 00006518 Screw M3x8 DIN 914
8 00003137 Screw M3x3 DIN 916 22 00005222 Cog wheel
9 00005223 Drive wheel 23 00007352 Cogged belt
10 00005148 Sleeve
11 00006520 Screw M4x6 DIN 912
12 00005147 Motor holder
13 00665058 Traction screw assembly

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray C-9

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2.3 Tube head

2.3.1 Primary slots TR

Ref Part no. Description Ref Part no. Description

1 00652185 Primary slot STD TR 2 00652186 Primary slot CEPH TR

2.4 Cassette carriage

2.4.1 Secondary slots TR

4
3
5
2
6
8
7

SY
G expo
ICIN fore
L SL t be
SA slo
EM .
ST sure

ER
SE
SV ant
AN av
S
9
ER ct TR ct
SV rre ES corre
AN e co UP r
TR t th CO ateu
lec llim
Se E DE co
EM er le Ê
ST
SY tionn n.
itio
S lec os
xp
l«e

10

Ref Part no. Description Ref Part no. Description

1 00671074 Microswitch assembly 6 00004849 Screw M4x10 DIN 912
2 00007241 Holder plate 7 00002751 Screw M2.3x12 DIN 84
3 00637121 Transversal-switch cable 8 00665520 Inner secondary slot TR
4 00004751 Microswitch mounting plate 9 00665530 Outer secondary slot TR
5 00002999 Washer ø4.3/9 DIN 125 10 00665529 Magnetic slider

C - 10 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2.4.2 Secondary radiation protection plate

Ref Part no. Description

1 00655068 Secondary radiation protection plate

2.5 Rotating unit

2.5.1 Generator processor software

Ref Part no. Description

1 00471088 Software

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray C - 11

TRANSVERSAL SLICING SYSTEM OTHER PARTS

2.6 Patient positioning system

PL
AN
ME
CA
TR
AN
SV
ER
SA
LS
LIC
ING
SY
ST
EM
,p
ati
12 en

midsagittal plane
tp
os
itio
nin
11 gt
em
pla
te
10

9 1
8

12
6

11
5
20

10
4
+0-

8
20

3
7
R/D
6
2
_+ 5
+_
4
1
3
1 2

20
+0-

20

L/G
2

Ref Part no. Description

1 00657004 Patient positioning template
2 00624006 Protractor

C - 12 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

 Chapter

D TRUE PROFILE TMJ

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray D-1

TRUE PROFILE TMJ TRUE PROFILE TMJ PARTS

1 TRUE PROFILE TMJ PARTS

1.1 TMJ support complete

3
4
5
6
True Profile TMJ positioning ruler

2
PLANMECA

8
7
ees
degr
36
33
30
27
24
21
18
15
12
9
6
3
0
-3
-6

Ref Part no. Description

1 00665091 True profile TMJ support complete
2 00326040 Screw M4x8 ULS
3 00003326 Washer ø4.3/12 DIN 9021
4 00005238 Rest
5 00620024 Label (LBL-X-051)
6 00652130 Block
7 00005231 Slide plate
8 00665095 True profile TMJ ruler

D-2 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

TRUE PROFILE TMJ TRUE PROFILE TMJ PARTS

1.2 Keyboard processor PCB

3
2

Ref Part no. Description

1 00665070 Keyboard processor PCB 105-10-06
2 00471087 Software
3 00637018 Software lock key

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray D-3

TRUE PROFILE TMJ TRUE PROFILE TMJ PARTS

D-4 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

 Chapter

E OPTIONAL FEATURES

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray E-1

OPTIONAL FEATURES FREE STANDING BASE

1 FREE STANDING BASE

15

14 7

13 8
8
9 6
10
8
9 5
9 4
12 2
11 3 5
5

4 4

4 1

Ref Part no. Description Ref Part no. Description

1 00050021 Free standing base complete 15 10010518 Exhibition base additional support set
2 00067105 Base plate + levelling feet
3 00671014 Base plate
4 00671013 Levelling foot
5 00004631 Cover plug
6 00671026 Support bracket assembly
7 00002254 Allen key
8 00002930 Screw M8x30 DIN 912
9 00003003 Washer ø8.4/17 DIN 125
10 00006972 Support plug
11 00003094 Screw M8x16 DIN 912
12 00007000 Column holder
13 00003141 Screw M6x6 DIN 916
14 00002252 Allen key

E-2 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

OPTIONAL FEATURES CALIBRATION TOOLS

2 CALIBRATION TOOLS
1

D
N
E

71
09
o.5
N

A
C
E
M
N
LA
P
77
.509
NO

INE

T
R
A
Y-L

E
Y

T
IN
AO

S
-L
X
MEC
AN
PL

10
ol
to

2
on
ati
dic
in
r
ye
, la
M
E
T

3
S
Y
S
G
IN
LIC
S
L
A
S
R
E
V
S
N
A
R
T
A
C
E
M
N
LA
P

D
N
E

71
09
o.5
N

A
C
E
M
UP

N
LA
P
77
.509
NO

2
97
INE

an en
T

ra
R

50
sc re
x-
A
Y-L

ro sc
Y

IN

o.
AO

-L

/ P nt

N
X

e e
MEC

lin nm
ro g
AN

P ali
PL

P am
be
M

av ght
5

t le yli
e

no da
11

o in
:D n
E e
T re
O sc
N e
th
WN
DO

8
7 6

5
4
9
Positioning light 25mm
Positioning light 0mm
Soft tissue filter 0mm

2
23
52
.6
No

24
8x
6

t1
sta
alo
ph
Ce
e
lin
Pro
02
20
PM
CA
ME
AN
PL

12
Aectool.eps

Ref Part no. Description Ref Part no. Description

1 00050970 Panoramic calibration tool set 8 00653126 Ceph head support alignment tool
2 00050971 Ball phantom 9A 00652232 Cephalometric beam alignment tool,
3 00050973 Alignment ruler 18x24
4 00050977 Frankfurt plane alignment tool 9B 00652233 Cephalometric beam alignment tool,
5 00050972 Beam alignment tool 8”x10”
6A 00671063 Ceph calibration tool set (18x24) 10 00007100 Transportation pin
6B 00671064 Ceph calibration tool set (8”x10”) 11 10000463 TSS Layer Indicator
7 00671081 Soft tissue filter positioning tool 12 10002199 AEC calibration filter

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray E-3

OPTIONAL FEATURES TRANSPORTATION ACCESSORIES

3 TRANSPORTATION ACCESSORIES

1
3

5 4
6
7
8
12
9
11

4 10

Ref Part no. Description Ref Part no. Description

1 00007100 Transportation pin 13 00671071 Transportation accessories set
2 00003344 Screw M8x110 Zn DIN 912 (includes all parts 1..12)
3 00652084 Sleeve
4 00007099 Transportation pin
5 00005312 Clamp screw
6 00656019 Clamp piece
7 00326227 Washer M14 DIN 9021
8 00003330 Washer ø8.4/25 DIN 9021
9 00002930 Counterweight locking screw
M8x30 DIN 912
10 00653040 Packing piece
11 00653041 Packing piece
12 00653042 Packing piece

E-4 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

OPTIONAL FEATURES CARRYING HANDLES

4 CARRYING HANDLES

Left
Right

Ref Part no. Description

1 00050985 Carrying handles, left and right
2 00003399 Knurled- head screw M6x20 GN 421
3 00003403 Wheel
4 00007494 Carrying handle, right (without wheels)
5 00007495 Carrying handle, left (without wheels)
6 00626003 Screw M12x20 Zn DIN 933

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray E-5

PM 240x300 CASSETTE CARRIAGE

Spare-Parts Manual
6
5
2

8
7
S
: )
G m )
N m m )
1

TI
R
A 32 m m )
4

E x 32 m m )
S ,3 x 0 m
FU ( 6 ,3 x 2 0 m )
R 6 5 2 m m )
TO T ( ( 5 x 20 m m )
R
A A T ( 5 x 20 m m )
15 A T ( 5 x 20 m m
PM 240x300 CASSETTE CARRIAGE

E
N 8 A
G
E
T ( 5 x 20 m
E
R 1.6 mA T ( 5 x 20
=
W
= 0 mA FF ( 5x
50 0 A FF
O
P (
3

E V = 5 8 F G A
B 2 A T O TIN 4/
7 V = 8 1A T K A 00
TU 11 0 = A IS R
R D L-X-
0, 24 V = 4 N
10 0,
ST A LB
17 V ST =
IN
2 G GA TYPE
1 2 , 1 40 A ST =
F IN A E
00 , 2 RF A = N N M
2 1 0 F R O
F 3 22 PE R A CTI H SA
F U E W TE IT
S UP O W
4 S PR LY
F 5 ED N
F 6 U O
N E
F 7 TI C
N
F O LA
C EP
R R
FO RE, SE
FI F FU
O

6
5

PM 240x300 cassette carriage retrofit

Cassette carriage complete 240x300

Planmeca Proline CC Panoramic X-Ray

Screw M4x10 DIN 7984

Screw M4x12 DIN 7984

Washer ø4.3/9 DIN 125
Radiation block shield
Cover assembly
Description

Washer
OPTIONAL FEATURES

Cover

kit
00655100
00003108

00006807
00002999
00006023

00665201
00665202

00600120
00665162
Part no.
5

E-6
Ref
1
2
3
4
5
6
7
8
9
OPTIONAL FEATURES PM 240x300 CASSETTE CARRIAGE

5.1 Cassette driving mechanism

2
3

4
5
3
39
38
44
7
6
37
2 9
40
8
33 32 31
34 30
33 29
32 28
9 35
10 26
26 36
11 27 27 22
12 41 26 23
13 43
17 18
14 19 42
16 20
15 25
21 24
22 23
20
18 19

Ref Part no. Description Ref Part no. Description

1 00653130 Inner secondary slot 24 00003003 Washer ø8.4/17 DIN 125
2 00326018 Screw M3x6 DIN 912 25 00007371 Positioning screw holder
3 00002998 Washer ø3 DIN 125 26 00003108 Screw M4x10 DIN 7984
4 00005140 Spacer 27 00003143 Screw M4x6 DIN 916
5 00665203 Slide frame assembly 28 10006972 Cassette holder frame
6 00326020 Screw M3x10 ISO 7380 29 00622362 Spring rod
7 00050715 Cassette limits PCB 105-10-04 30 00652359 Motor block
8 00002221 Spacer 31 00665060 Magn. attachment piece assembly
9 00006335 Screw M4x16 DIN 7984 32 00007353 Positioning magnet C12-00
10 00005263 Slide frame 33 00002400 Nut M4 DIN 934
11 00005265 Plate 34 00007354 Block
12 00003660 Screw M4x8 DIN 7991 35 00626001 Screw M4x25 DIN 7984
13 00005267 Pin 36 00665204 Cassette solenoid assembly
14 00007201 Roller 37 00005288 Spring
15 00007171 O-ring 7x3 38 00665050 Cassette motor
16 00006005 Circlip ø4 DIN 471 39 10008895 Bearing block assembly
17 00005702 Bearing 40 00655059 Sheet lead
18 00326015 Screw M4x6 DIN 7984 41 00002999 Washer ø4.3 DIN 125
19 00007016 Base 42 00127001 Washer ø8/14x1.0 DIN 988
20 00001490 Cable tie 43 00003079 Nut M8 DIN 439
21 00005269 Axle 44 10000339 Step motor connection cable
22 00005069 Screw M5x5 DIN 916
23 00003132 Screw M5x8 DIN 915

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray E-7

OPTIONAL FEATURES PM 240x300 CASSETTE CARRIAGE

5.2 Cassette holder profile

18

1
16 15

4 14
5

5 1
4
2 17 1
6 13 10
3 5
5 7

12 1
8

11 1
10
9

Ref Part no. Description Ref Part no. Description

1 00326017 Screw M3x8 DIN 7991 15 00680002 Cassette holder, upper
2 00005250 Lower guide strip 16 00005682 Friction strip
3 00680003 Cassette holder, lower 17 00005249 Slide axle ø10mm
4 00652361 Bushing 18 10020580 Cassette holder profile complete
5 00003137 Screw M3x3 DIN 916
6 00652360 End piece
7 00653129 Holder
8 00326023 Screw M3x8 DIN 7984
9 00007002 Soft tissue piece
10 00665027 Stop magnet
11 00327021 Washer ø4.3 DIN 127
12 00006807 Screw M4x12 DIN 7984
13 00680004 Cassette holder profile
14 00652357 Guide post

E-8 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

 Chapter

F DIMAX3 AND DIMAX DIGITAL

PANORAMIC SYSTEM

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F-1

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1 DIMAX3

see page F-3

1
7
see page F-5
2
see page F-4

see pages F - 8 ... F - 10

4
see page F-11

3
see page F-7

Ref. Part no. Description Ref. Part no. Description

1 10002298 Dimax2 Proline panoramic connector 7 10003488 Dimax2 Proline fixed panoramic
2 10002345 Dimax2 Proline fixed panoramic connector for pan/ceph units
connector
3 10002299 Dimax2 Proline cephalostat connector
4 10002301 Dimax2 Proline cephalostat 2nd primary
collimator
5 10007348 Dimax3 Proline cephalostat sensor
6 10007347 Dimax3 Proline panoramic sensor

F-2 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.1 Dimax3 Proline panoramic connector

Screw M4x8 ISO 7380
code 00326196 2
3
Screw M6x12 ISO 7380 1
code 10002266

Nut M3 DIN 934 code 00327033

Screw M6x12 ISO 7380
4 code 10002266
6
25 5

Screw M4x4 DIN 916

code 00326161
Screw M5x12 DIN 7984
code 00326105 Nut M3 DIN934 code 00327033

Washer ø5 DIN 125 7 11 Screw M5x12 DIN 913 code 10002267

code 00326228
Nut M3 DIN 985 Nyloc 12
code 07254033 8 13
9 14
Washer A10 DIN 6799 code 00326177
Screw M4x8 DIN 7984 15
code 00326196 10
Washer ø4 DIN 125 Screw 4x8 DIN 7984
code 00326135 5 25 code 10000357
16 17
18 Screw M4x4 DIN 916
code 00326105

24 19
Screw 3x8 DIN 7984 code 00326023
Screw M6x16 DIN 915
Washer ø4.3 DIN 9021 code 00003326
code 00327051
22 21
Screw 3x12 DIN 916 20
code 00226002

Nut M3 DIN 985 Nyloc

code 07254033 23
Screw M6x12 ISO 7380 code 10002266

Ref. Part no. Description Ref. Part no. Description

1 10001592 Adapter of panoramic connector 20 10001603 Handle rubber
2 00001490 Cable tie 21 10001584 Connector plastic
3 00007016 Cable tie holder 22 10001594 Lever
4 10001099 Side cover of panoramic connector 23 10001589 Bottom cover plate of panoramic
5 10001593 Needle axle connector
6 10001596 Locking knob 24 00006543 Led sleeve HLMP0103
7 10001595 Button axle 25 00006662 O-ring 10.82x1.78
8 10001587 Bar disc of panoramic connector
9 10002315 Dimax2 Proline frankfort laser
10 10001758 Dimax2 Data cable
11 10001608 Chamfered bar
12 10001585 Bar
13 10001583 Connector frame
14 10001599 Handle axle
15 10001598 Bearing of handle axle
16 10001597 Off-button
17 10001624 Lable LBL-X-106
18 10001600 Handle frame of panoramic connector
19 10001602 Support of handle rubber

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F-3

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.2 Dimax3 Proline fixed panoramic connector

Screw M4x8 ISO 7380
code 00326196

3 2

1
Screw M6x12 ISO 7380
code 10002266

Nut M3 DIN934 code 00327033

4 Screw M6x12 ISO 7380
code 10002266

Screw M4x4 DIN 912

code 00326105
6 9 Nut M3 DIN934 code 00327033
Washer ø5 DIN 125
code 00326228
Nut M3 DIN 985 Nyloc 7 10
code 07254033 8 11
Screw M4x8 DIN 7984
code 00326196
12
13
Washer ø4 DIN 125 18 5
code 00326135

14
Screw 3x8 DIN 7984 code 00326023
Washer ø4.3 DIN 9021 code 00003326 Screw M6x16 DIN 915
15 code 00327051 Screw M5x8 DIN 915
16 code 00326129
Screw M3x12 DIN 916
code 00226002

Nut M3 DIN 985 Nyloc 17

code 07254033

Screw M6x12 ISO 7380

code 10002266

Ref. Part no. Description Ref. Part no. Description

1 10001592 Adapter of panoramic connector 15 10001584 Connector plastic
2 00001490 Cable tie 16 10001594 Lever
3 00007016 Cable tie holder 17 10001589 Bottom cover plate of panoramic
4 10001607 Side cover of panoramic connector connector
5 10001593 Needle axle 18 10001758 Dimax2 Data cable
6 10001595 Button axle
7 10001587 Bar disc of panoramic connector
8 10002315 Dimax2 Proline frankfort laser
9 10001608 Chamfered bar
10 10001585 Bar
11 10001583 Connector frame
12 10001598 Bearing of handle axle
13 10002094 Locking disc of sensor
14 00006543 Led sleeve HLMP0103

F-4 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.3 Dimax3 Proline fixed panoramic connector for pan/ceph units

Screw M3x4 DIN 916 21
code 00007064

23
24 22
Screw M4x6 DIN 916
code 00326111

20 Nut M3 DIN934
code 00327033

Screw M2x10 DIN 84 Screw M4x20 DIN 912

code 00002048 code 00526004
ø4 DIN 125
Screw M4x6 DIN 916 code 00326135
code 00326111

19
Nut M4 DIN934
code 00327026

ø4 DIN 125
code 00326135
1

Screw M4x8 DIN 7984

code 10000357
Nut M3 DIN934 code 00327033
Screw M4x8 DIN 7991
code 00003660
12
Screw M4x4 DIN 912
code 00326105 18 2
Washer ø5 DIN 125
code 00326228 3
17
16 4
5
Nut M3 DIN 985 Nyloc
MSFC
8K

6
MEC

code 07254033
9 7
Screw M4x8 DIN 7984
code 00326196 10
Washer ø4 DIN 125 14 9
code 00326135 Screw M5x8 DIN 915
code 00326129
15 13
11
Screw M3x12 DIN 916 Screw M4x8 DIN 7984
code 00226002 code 10000357

8
12 Screw M6x12 ISO 7380
Nut M3 DIN 985 Nyloc code 10002266
code 07254033

Ref. Part no. Description Ref. Part no. Description

1 10002465 Adapter of panoramic connector 13 10001758 Dimax2 data cable
2 10001607 Side cover of panoramic connector 14 10002315 Dimax2 Proline frankfort laser
3 10001608 Chamfered bar 15 10002209 TD 1018 Adapter IN-LINE
4 10001585 Bar 16 10000933 EMI Snap-On Ferrite
5 10001583 Connector frame 17 10001595 Button axle
6 10001598 Bearing of handle axle 18 10001587 Bar disc of panoramic connector
7 10002094 Locking disc of sensor 19 10002589 Cephalo drive safety limit cable
8 10001589 Bottom cover plate of pan. connector 20 06310929 Optical sensor
9 10002466 Cover fastening bar 21 10004805 Motor assembly
10 10002467 Cover fastener 22 00652494 C-screw
11 10001593 Needle axle 23 00654037 Spring
12 10001594 Lever 24 00652491 Nut

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F-5

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.3.1 Z-carriage

Ref. Part no. Description

1 10002190 Cover strip

F-6 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.4 Panoramic unit with cephalostat

1.4.1 Dimax3 Proline cephalostat connector

Screw M6x12 ISO 7380 code 10002266

Washer ø6 DIN 125 code 00003651

Screw M6x12 ISO 7380

code 10002266 25
Washer ø6 DIN 125
code 00003651
1
24

18
Washer A10 DIN 6799
code 00326177 20
23
21 19
Screw M4x8 ISO 7380 22
code 00326196 17
Screw M4x12 DIN 7984
16
code 00327070
Screw M5x12 DIN 913
code 10002267
2
15
Screw M4x4 DIN 916
14 code 00326105

13 3
Screw M6x12 ISO 7380 Nut M3 DIN 934
code 10002266 7 code 00327033
12
Nut M3 DIN 934 Screw M3x12 DIN 916
code 00327033 code 00226002
8
3

9 11
5 Screw M6x16 DIN 915 10
6 code 00327051
Nut M3 DIN 985 Nyloc
code 07254033
20 Washer ø5 DIN 125 code 00326228
Screw M5x12 DIN 7984 code 00326105
4 Nut M3 DIN 985 Nyloc
code 07254033

Ref. Part no. Description Ref. Part no. Description

1 10001577 Side cover of cephalostat connector 14 10001598 Bearing of handle axle
2 10001590 Bottom cover plate of cephalostat 15 10001601 Handle frame of cephalostat connector
connector 16 10001602 Support of handle rubber
3 10001593 Needle axle 17 10001603 Handle rubber
4 10001596 Locking knob 18 10001624 Lable LBL-X-106
5 10001595 Button axle 19 10001597 Off-button
6 10001588 Bar disc of cephalostat connector 20 00006662 O-ring 10.82x1.78
7 10001608 Chamfered bar 21 10001599 Handle axle
8 10001586 Code bar 22 00007016 Cable tie holder
9 10001585 Bar 23 00001490 Cable tie
10 10001759 Dimax2 Data cable, cephalostat 24 10002193 Ceph bottom cover
11 10001594 Lever 25 10001623 Cephalostat holder of connector
12 10001584 Connector plastic
13 10001583 Connector frame

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F-7

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.4.2 Cephalostat mechanism frame

Screw M4x8 ISO 7380
code 00326196
Screw M6x12 ISO 7380 code 10002266
Washer ø4 DIN 125
code 00326135
1
2
Screw M4x12 ISO 7380
code 10002158

Screw M6x12 ISO 7380

code 10002266

Screw M4x6 DIN 7991

code 00326186

3 6 7

Washer ø6 DIN 9021 code 00326240

3 Screw M6x25 DIN 7984 code 00326107

Screw M4x8 ISO 7380

code 00326196

Washer ø4 DIN 125

code 00326135

Ref. Part no. Description

1 10001650 Motor cover
2 10001630 Sheet frame
3 10001648 Cable holder
4 10002157 Dimax2 cephalostat data cable
5 10001649 Frame cover
6 00002269 Cable anchor
7 10001761 Limit sensor cable, cephalostat

F-8 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.4.3 Cephalostat mechanism

5
4
6
7
3 6
8
1 2 9
10 Screw M6x12 ISO 7380
Washer ø10 DIN 125 code 10002266
code 00003004
11
Screw M10x90 DIN 912
code 00326154

12

9
8
6
7
6
8
6
13 14
6

15

Screw M6x12 ISO 7380

code 10002266 Washer ø5 DIN 125 Washer ø5 DIN 125
code 00326228 code 00326228

Screw M5x20 DIN 912

code 00326086 16 19
17

15
Washer ø5 DIN 125
code 00326228
Screw M5x20 DIN 912 Screw M5x8 DIN 916
code 00326086 18 code 00326337
Screw M5x6 DIN 912
code 00326253

Ref. Part no. Description Ref. Part no. Description

1 10002325 Dimax2 Proline cephalostat motor 15 10001625 Trail holder
2 10002334 Timing belt 16 10001626 Trail
3 10001634 Motor spacer 17 10001627 Belt wheel
4 10001756 Cephalostat micromotor cable 18 10001653 Fastening flat spring
5 10002324 Dimax2 Proline cephalostat main axle 19 10000428 Bearing needle NR5x34.8
6 10001633 Pinion washer
7 10001638 Belt pinion 20
8 10001642 Axle spacer
9 10002265 Ball bearing
10 10001635 Bearing rest
11 10001632 Main axle
12 10001636 Motor rest
13 10001639 Belt pinion 26
14 10002331 Timing belt

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F-9

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.4.4 Dimax3 Proline cephalostat sledges

1 Screw M4x16 DIN 7991 code 00326239

Washer ø4.3 DIN 125 code 00326135

2 Screw M6x30 DIN 7984

code 00326238

9
Washer ø4.3 DIN 125 code 00326135
Screw M4x8 DIN 7984 code 10000357

4
10

Screw M4x8 DIN 7984

code 10000357
5
6
Washer ø4.3 DIN 125
code 00326135 7
Screw M4x6 DIN 7984 code 00326015
Screw M4x8 DIN 7984
code 10000357

Ref. Part no. Description Ref. Part no. Description

1 10002323 Dimax2 proline cephalostat sledge 10 10003311 Collimator flange
2 00005702 Ball bearing
3 10001629 Sledge
4 10001637 Bearing axle
5 10001640 Flat spring
6 10001641 Belt lock
7 00007016 Cable tie holder
8 10001645 Gap flange
9 10001656 Sensor plate

F - 10 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.4.5 Dimax3 Proline cephalostat 2nd primary collimator

Screw M6x12 ISO 7380

code 10002266

Screw M6x12 ISO 7380

code 10002266
Washer ø6 DIN 125
code 00003651

Screw M5x6 DIN 913

code 10002267
2

Screw M6x12 ISO 7380

code 10002266
3
Washer ø6 DIN 125
code 00003651

Ref. Part no. Description

1 10002191 Collimator cover
2 10001646 Collimator connector
3 10001651 Collimator adjustment flange
4 10003185 Collimator frame assembly
5 10001699 Label LBL-X-108

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 11

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.4.6 Column

1
2

Ref. Part no. Description Ref. Part no. Description

1 00006882 Ceph counterweight 2 00326264 Screw M8x150 DIN 912

1.4.7 Z-carriage

Ref. Part no. Description Ref. Part no. Description

1 10002129 Offset plate of hall sensor 2 00326026 Screw M4x8 DIN 7984

1.4.8 Tube head

Ref. Part no. Description

1 10001696 First primary collimator

F - 12 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.5 Dimax3 PCI interface cable

2
1

Ref. Part no. Description

1 10002211 Dimax2 PCI Interface cable
2 10002192 Cable attachment plate
3 00326026 Screw M4x8 DIN 7984

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 13

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.6 Keyboard processor PCB

Ref. Part no. Description

1 10002568 Keyboard processor PCB 105-10-06
2 10004422 Software

F - 14 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.7 Generator processor PCB

Ref. Part no. Description

1 00665180 Generator processor 105-10-03
2 10004421 Software
3 00006272 PCB holder

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 15

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX3

1.8 PC accessories

2 3

Ref. Part no. Description Ref. Part no. Description

1 10010208 Interconnection cable 10m 3 10010448 Planet grabber cable
2 10010214 Planet grabber cable 4 10001254 2-Channel Dimax2/Dixi PCI Interface PCB
118-10-06

1.9 Dimax2 alignment tools

4
2 3
1

Ref. Part no. Description Ref. Part no. Description

1 10003845 Dimax2 calibration tool set 3 10002935 Dimax2 cephalostat calibration tool
2 10002699 Dimax2 sensor alignment tool 4 00665413 Calibration block

F - 16 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2 DIMAX

2.1 Optical fibre cable

2
3
4

8
M IN
C
FIB IM UM A U
RE TI
OP BE NDO N
TIC ! LBL
AL RA -X-
CA DI 101
BL US
E IS OF

2
40
mm
.

3
4

Ref. Part no. Description

1A 00637138 Optical fibre cable 10m
1B 00637147 Computer cable 20m
2 00665407 Cable holder guide wheel assembly
3 00655149 Wheel holder
4 00006521 Screw M6x16 DIN 916
5 00652479 Small cable guide wheel
6 00002922 Screw M4x8 DIN 912
7 00652480 Cable centre guide wheel
8 00620104 Label LBL-X-101

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 17

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.2 Keyboard processor PCB

Ref. Part no. Description

1 00665070 Keyboard processor PCB 105-10-06
2 00471087 Software (3.46 or later)

F - 18 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.3 Upper shelf cover

2
3
1
4

Ref. Part no. Description

1 00655150 Cover with optical fibre cable guide
2 00326088 Screw M3x3 DIN 914
3 00652481 Connector ring
4 00431378 Adapter
5 10000721 Cover assembly

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 19

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.4 Guide block assembly

2
3
1

7 4
5
8
9

10
6
5 2
4

11

12

13

14

15 14

16 16

17

Ref. Part no. Description Ref. Part no. Description

1 00665403 Guide block assembly 15 00005302 Magnet holder
2 00000460 Connector 0-350766-1 16 00006267 Magnet
3 00637134 Connecting cable 17 00005836 Screw M6x12 DIN 7984
4 00001490 Cable tie
5 00007016 Cable tie holder
6 00326015 Screw M4x6 DIN 7984
7 00005110 Nut
8 00000709 Washer ø18/25x1
9 00665076 Lock ring
10 00665074 Cable guide assembly
11 00655104 Guide block
12 00665077 Wear strip
13 00665073 Crank assembly
14 00665075 Guide profile assembly

F - 20 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.5 Generator processor PCB

6
Ceph. 8
Ceph. 7
5
Ceph. 3
8 4 Ceph.

9
1

9
6 Ceph.

Ref. Part no. Description

1 00665180 Generator processor 105-10-03
2 00471064 Software (3.07 or later)
3 00652424 Bush
4 00652447 Bush (ceph.)
5 06310514 Adapter PCB 105-10-14A (ceph.)
6 00326095 Screw M3x6 ISO 7380 (ceph.)
7 00637143 Ceph head opto cable (ceph.)
8 00326063 Screw M4x20 DIN 916
9 00326040 Screw M4x8 ISO 7380

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 21

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.6 Sensor head

19 CAUTION

LBL-X-099
LASER RADIATION -
DO NOT STARE
INTO BEAM
1mW CLASS II
635nm LASER
PRODUCT

1 20 AVOID
EXPOSURE-
7 10 Laser radiation
is emitted from
this aperture.

11
LBL-X-100

12 13
8
2 4 8 14
9
3 5 6
15

16

5 17

ax C
A

im
E
M
N
D
P
L
A

18

Ref. Part no. Description Ref. Part no. Description

1 00665402 Cover assembly 15 00654036 Leaf spring
2 00620090 Label LBL-X-094 16 00653194 Mirror
3 00006335 Screw M4x16 DIN 7984 17 00655145 Sensor head cover
4 00610006 Velcro tape 18 00620101 Label LBL-X-097
5 00002926 Screw M6x12 DIN 912 19 00620102 Laser caution label, USA, LBL-X-099
6 00665400 Sensor head assembly 20 00620103 Laser warning label, USA, LBL-X-100
7 00665401 Outer cover assembly
8 00004849 Screw M4x10 DIN 912
9 00665329 Laser light assembly
10 00626010 Screw 4x10 PT
11 00653190 Lamp plate
12 00652483 Spacing bush
13 00652476 Friction plate
14 00655148 Mirror bracket

F - 22 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.7 Ceph model sensor head

22 CAUTION

LBL-X-099
1 LASER RADIATION -
DO NOT STARE
INTO BEAM
1mW CLASS II
635nm LASER
23 PRODUCT

6 9 AVOID
EXPOSURE-
2 10
Laser radiation
is emitted from
this aperture.
LBL-X-100

7 11
3 7 12
4 5
8
13
14
15

16
17
21

21

ax C
A

im
E
M
N
D
P
L
A

20
18

19

Ref. Part no. Description Ref. Part no. Description

1 00665410 Ceph model cover assembly 15 00653194 Mirror
2 00620090 Label LBL-X-094 16 00655154 Sensor head cover
3 00610006 Velcro tape 17 00004849 Screw M4x10 DIN 912
4 00006335 Screw 4x16 DIN 7984 18 00620101 Label LBL-X-097
5 00002926 Screw M6x12 DIN 912 19 00652486 Soft tissue filter
6 00665409 Outer cover assembly 20 00665404 Dimax ceph sensor head assembly
7 00004849 Screw M4x10 DIN 912 21 00003322 Screw M6x12 DIN 7991
8 00665329 Laser light assembly 22 00620102 Laser caution label, USA (LBL-X-099)
9 00626010 Screw 4x10 PT 23 00620103 Laser warning label, USA (LBL-X-100)
10 00653190 Lamp plate
11 00652483 Spacing bush
12 00652476 Friction plate
13 00655148 Mirror bracket
14 00654036 Leaf spring

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 23

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.8 Transversal slicing system primary slots

3
1

Ref. Part no. Description

1 00652495 Primary slot STD
2 00652430 Primary slot CEPH
3 00326018 Screw M3x6 DIN 912

F - 24 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

2.9 PC accessories

1 3

2 4

Dig
ita
l IM
Ag
ing
X -ra
yI
nte
gra
yte
d Sof
tw
are

Ase
tel. ntaja
:+3 nk
58 atu
-0-7 6,
59 FIN
0 -0
ww 550 081
w.p 0, fa 0 H
lan x:+ elsi
mec 358 nk
a.co -9-7 i, Fin
m 590 lan
55 d
66

Ref. Part no. Description Ref. Part no. Description

1 00050880 Interconnection cable 10m 3 00665406 Image grabber 116-10-05
2 00637133 Planet grabber cable 4 00665412 Dimaxis CD

2.10 Dimax alignment tools

2
1

Ref. Part no. Description Ref. Part no. Description

1 00653176 Dimax alignment tool adapter 2 00665413 Calibration block

Spare-Parts Manual Planmeca Proline CC Panoramic X-Ray F - 25

DIMAX3 AND DIMAX DIGITAL PANORAMIC SYSTEM DIMAX

F - 26 Planmeca Proline CC Panoramic X-Ray Spare-Parts Manual

 www.planmeca.com
PLANMECA OY Asentajankatu 6, 00880 Helsinki, Finland, tel. +358 20 7795 500
fax +358 20 7795 555, e-mail: sales@planmeca.com, www.planmeca.com