lz
o
h
s
a
V
POLYDOROS IT / IT-S
CO
Configuration
POLYDOROS IT / IT-S
Configuration Lists
The Configuration Instructions, COPL-136.843.02..., are
part of these instructions
07759728
07463909
05760090
05760082
© Siemens AG 2005
The reproduction, transmission or use
of this document or its contents is not
permitted without express written
authority. Offenders will be liable for
damages. All rights, including rights
created by patent grant or registration
of a utility model or design, are
reserved.
Print No.: COPL-136.843.03.01.02 English
Replaces: n.a. Doc. Gen. Date: 08.05
2 Revision / Disclaimer
1Revision / Disclaimer
Document revision level
The document corresponds to the version/revision level effective at the time of system
delivery. Revisions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified
personnel who are employed by Siemens or one of its affiliates or who are otherwise
authorized by Siemens or one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated
with or authorized by Siemens or one of its affiliates are directed to contact one of the
local offices of Siemens or one of its affiliates before attempting installation or service pro-
cedures.
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 2 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
Table of Contents 3
1- 0Table of Contents
1 _______ Standard Console Configuration Lists ______________________________ 4
2 _______ Touch Panel Configuration List ____________________________________ 8
3 _______ Organ programs (with standard console) ___________________________ 12
Bucky table organ program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Bucky wall stand organ program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4 _______ Changes to Previous Version_____________________________________ 16
Siemens AG COPL-136.843.03.01.02 Page 3 of 16 POLYDOROS IT / IT-S
Medical Solutions 08.05 CS PS 212
4 Standard Console Configuration Lists
2-
1Standard Console Configuration Lists
Service Menu Submenu 1 Submenu 2 Submenus 3/ 4
Configuration Generator Grid Stationary grid Q
Information: See the Moving grid Q
Configuration Instruc-
tions.
max Values P max _________________
UT max _________________
IT max _________________
mAs max _________________
IONTOMAT Bucky table HSE Q
6 mm chamber Q
12 mm chamber Q
invert MF Q
Bucky wall HSE chamber Q
stand 6 mm chamber Q
12 mm chamber Q
invert MF Q
HV cable 10 m Q
16 m Q
24 m Q
Control console Settings Display light
Date
tube load Indi- Show HU value Q
catior Tube load buzzer Q
Default Organ Programs
EP series WHO series Q
1/2 - EP series Q
1- EP series Q
Workstations Bucky table Q
Bucky wall stand Q
Bed Q
TOMO / Planigraphy Q
Startup message POLYDOROS IT Q
GEN IT Q
none Q
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 4 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
Standard Console Configuration Lists 5
Servicemenue Submenue 1 Submenue 2 Submenue 3/ 4
Configuration Tube Tube change tube type _____________
Information: See the Planigraphic Type By KK- Interface Q
Configuration Instruc- equipment
tions.
Internal (60Hz) Q
Internal (50Hz) Q
Times Time A _____
Time B _____
Time C _____
Time D _____
Time E _____
Set DAP meter No DAPM Q
SW-dependant DAPM Standard Resolution Q
DAPM High Resolution Q
Siemens AG COPL-136.843.03.01.02 Page 5 of 16 POLYDOROS IT / IT-S
Medical Solutions 08.05 CS PS 212
6 Standard Console Configuration Lists
Servicemenue Submenue 1 Submenue 2 Submenue 3/4
Adjustment Tube adjustment Tube warm up
Information: See Learn filament
the Adjustment
Instructions. mAs relay adjust
Stat. inverter adjust
IONTOMAT Sensitivity Channel A H : ___
Information: See the
(Bucky table) U : ___
Startup Instructions.
D : ___
Channel B H : ___
(Bucky wallstand) U : ___
D : ___
Corr. curve high (125 kV) 6 mm chamber H : ___
U : ___
D : ___
12 mm chamber H : ___
U : ___
D : ___
HSE chamber H : ___
U : ___
D : ___
Corr. curve high (60 kV) 6 mm chamber H : ___
U : ___
D : ___
12 mm chamber H : ___
U : ___
D : ___
HSE chamber H : ___
U : ___
D : ___
Various tests Norminal power Information: See the Troubleshooting Guide.
SI: single oscillation Information: See the Troubleshooting Guide.
Iontomat drift Drift bucky table Information: See the Startup Instructions.
Drift bucky wall Information: See the Startup Instructions.
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 6 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
Standard Console Configuration Lists 7
Servicemenue Submenue 1 Submenue 2 Submenue 3/4
Information Error logInformation: See the Troubleshooting Guide.
Generator data Information: See the Configuration Instructions.
Tube Data Information: See the Configuration Instructions.
System data Information: See the Configuration Instructions.
Siemens AG COPL-136.843.03.01.02 Page 7 of 16 POLYDOROS IT / IT-S
Medical Solutions 08.05 CS PS 212
8 Touch Panel Configuration List
3-
2Touch Panel Configuration List
Service Menu Submenu 1 Submenu 2 Submenus 3/ 4
Configuration Site Structure Available worksta- Bucky table Q
Information: See
tions Bucky wall stand Q
the Configuration
Bed/ Free Exposure Q
Instructions.
Planigraphy equipment/ Tomography Q
HV cable length 10 m Q
16 m Q
24 m Q
Grid Stationary grid Q
Moving grid Q
Planigraphic equip- Type by KK- Interface Q
ment Internal (60Hz) Q
Internal (50Hz) Q
Planigraphic equip- configure Time A ___
ment (only with "KK Time B ___
Interface" Plani-
graphic equip- Time C ___
ment) Time D ___
Time E ___
Set DAP meter No DAPM Q
SW-dependant DAPM Standard Resolution Q
DAPM High Resolution Q
Set generator max. max. kV _________________
values max. P _________________
SW-dependant
max. mA _________________
max. mAs _________________
New tube actual tube: _________________
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 8 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
Touch Panel Configuration List 9
Service Menu Submenu 1 Submenu 2 Submenus 3/ 4
IONTOMAT channel A none Q
HSE chamber Q
6 mm chamber Q
12 mm chamber Q
invert MF Q
channel B none Q
HSE chamber Q
6 mm chamber Q
12 mm chamber Q
invert MF Q
Configuration Control con- EP series WHO series Q
Information: See
sole Settings 1/2 - EP series Q
the Configuration
1- EP series Q
Instructions.
Starting message POLYDOROS Q
GEN Q
none Q
Display light SW-depen- 10(min)...20(max) ___
dant
Language _________________
Set date
Tube load indicatior Display light Show HU value Q
tube load Indi- Tube load buzzer Q
catior
Organ Programs Load default programs
Backup SW-dependant
Restore SW-dependant
Further Settings 3-point Tech- mAs Q
nique mA/mAs Q
SW-dependant
Display H _______________
SW-dependant
U _______________
D _______________
Display light 10(min)...20(max) ____
SW-dependant
Siemens AG COPL-136.843.03.01.02 Page 9 of 16 POLYDOROS IT / IT-S
Medical Solutions 08.05 CS PS 212
10 Touch Panel Configuration List
Servicemenue Submenue 1 Submenue 2 Submenue 3/ 4
Adjust Tube Warm Up
Information: Siehe Learn filament
Justieranleitung.
mAs- relay adjust
Iontomat Sen- Channel A (Bucky table) H ___
sitivity U ___
Information: See
D ___
the Startup
Instructions. Channel B (Bucky wall H ___
stand) U ___
D ___
Corr. curve high (125 6 mm chamber H ___
KV)/ U ___
Voltage coprrection 125 D ___
KV
12 mm chamber H ___
U ___
D ___
HSE chamber H ___
U ___
D ___
Corr. curve high (60 KV)/ 6 mm chamber H ___
Voltage coprrection U ___
D ___
12 mm chamber H ___
U ___
D ___
HSE chamber H ___
U ___
D ___
Static inverter adjust
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 10 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
Touch Panel Configuration List 11
Servicemenue Submenue 1 Submenue 2 Submenue 3/ 4
Diagnostic Norminal power Information: See the Troubleshooting Guide.
Iontomat drift channel A Information: See the Startup Instructions.
Iontomat drift channel B Information: See the Startup Instructions.
SI: single oscillation Information: See the Troubleshooting Guide.
Info Error Log Information: See the Troubleshooting Guide.
Information: See the Software version Firmware Generator ___________
Configuration Instruc-
tions.
SW Console
System Info
Dongel Optionen
Tube Info
Siemens AG COPL-136.843.03.01.02 Page 11 of 16 POLYDOROS IT / IT-S
Medical Solutions 08.05 CS PS 212
12 Organ programs (with standard console)
4-
Bucky table organ program
3Organ programs (with standard console)
Fig. 1:
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 12 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
Organ programs (with standard console) 13
Fig. 2:
Siemens AG COPL-136.843.03.01.02 Page 13 of 16 POLYDOROS IT / IT-S
Medical Solutions 08.05 CS PS 212
14 Organ programs (with standard console)
Bucky wall stand organ program 0
Fig. 3:
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 14 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
Organ programs (with standard console) 15
Fig. 4:
Siemens AG COPL-136.843.03.01.02 Page 15 of 16 POLYDOROS IT / IT-S
Medical Solutions 08.05 CS PS 212
16 Changes to Previous Version
5-
4Changes to Previous Version
No changes; initial publication.
POLYDOROS IT / IT-S COPL-136.843.03.01.02 Page 16 of 16 Siemens AG
08.05 CS PS 212 Medical Solutions
