Scribd
Upload
61 views1 page

Facsimile Receiver

The document provides maintenance instructions for equipment. It states that only qualified personnel should open and work inside the equipment. Certain chemicals should not be applied to coating and plastic parts as they can damage those materials. It also provides details on replacing the backup battery when it becomes low, lubricating the paper feed gears every few months, and cleaning the main unit and thermal head using only specified materials.

Uploaded by

craponzel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views1 page

Facsimile Receiver

The document provides maintenance instructions for equipment. It states that only qualified personnel should open and work inside the equipment. Certain chemicals should not be applied to coating and plastic parts as they can damage those materials. It also provides details on replacing the backup battery when it becomes low, lubricating the paper feed gears every few months, and cleaning the main unit and thermal head using only specified materials.

Uploaded by

craponzel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

2.

MAINTENANCE

& WARNING NOTICE


Do not apply paint, anti-corrosive
Do not open the equipment except to sealant or contact spray to coating or
replace paper and oil paper feed gears. plastic parts of the equipment.

Those itemscontain organic solvents that


Only qualified personnel should work can damage coating and plastic parts,
inside the equipment. especially plastic connectors.

2.1 Backup Battery


The manganese lithium battery inside the main unit is used to keep the clock running, and
its life is about five years. When the battery voltage is low the time is "slow." Have a
qualified technician replace the battery when this occurs.

Part Type Code No.


Battery U130002 (CR2032) 000-159-813

2.2 Lubrication and Cleaning


Lubrication
Lubricate the paper feed gears with 1-2 drops of machine oil or clock oil every 2-3 months.
The gears may be accessed by opening the paper access lid.

Paper feed
gears

Cleaning

Dust and dirt may be removed from the main unit with a soft cloth. DO NOT use chemical-
based cleaners to clean the cabinet or control panel, as they can remove paint and
markings.

Clean the thermal head with the cotton cleaner (supplied) monthly. Ethyl alcohol may be
used to remove stubborn foreign material. DO NOT use any other liquid besides ethyl
alcohol to clean the thermal head.

17

You might also like