Günther GmbH · Temperaturmesstechnik

99 - EZT // Individual components

99-EZT
Connection heads Type A, AUZ, AUS and AUZH Günther GmbH · Temperaturmesstechnik

Head Type A Connection (Xa) for

Large, slanted head with a fitted the thermowell Protective Cable Approx.
removable cover (screwed) or the holding tube system outlet weight/g Article number
Thread M24 x 1.5 IP 54 M20 x 1.5 250 98-91300106-GM24
Hole 11.8 mm IP 53 M20 x 1.5 260 On request
Hole 22.8 mm IP 53 M20 x 1.5 255 98-91300106-G022
Hole 24.8 mm IP 53 M20 x 1.5 250 98-91300106-G024
94

Hole 26.8 mm IP 53 M20 x 1.5 235 98-91300106-G026

63.5 Hole 28.8 mm IP 53 M20 x 1.5 235 98-91300106-G028
Hole 32.8 mm IP 53 M20 x 1.5 235 98-91300106-G032
XA Connection head made of die-cast light alloy for the protection and holding tubes
of various dimensions.

Head Type AUZ Connection (Xa) for

Spherical head with a hinged cover the thermowell Protective Cable Approx.
and a cheese-head screw
or the holding tube system outlet weight/g Article number
Thread M24 x 1.5 IP 65 M20 x 1.5 260 99-91300306-GM24
Hole 22.8 mm IP 54 M20 x 1.5 280 99-91300306-G022
Hole 24.8 mm IP 54 M20 x 1.5 270 99-91300306-G024
100

Hole 32.8 mm IP 54 M20 x 1.5 260 99-91300306-G032

G 3/8 I IP 65 M20 x 1.5 280 On request
74

G 1/2 I IP 65 M20 x 1.5 270 On request

Connection head made of die-cast light alloy with a hinged cover and a cheese-head screw
for protection and holding tubes of various dimensions.
XA

Head Type AUS Connection (Xa) for

Spherical head with a hinged cover the thermowell Protective Cable Approx.
and a snap fastener
or the holding tube system outlet weight/g Article number
Thread M24 x 1.5 IP 65 M20 x 1.5 260 99-91300206-GM24
Hole 22.8 mm IP 54 M20 x 1.5 280 99-91300206-G022
Hole 24.8 mm IP 54 M20 x 1.5 270 99-91300206-G024
100

Hole 32.8 mm IP 54 M20 x 1.5 260 99-91300206-G032

74

G 3/8 I IP 65 M20 x 1.5 280 On request

G 1/2 I IP 65 M20 x 1.5 270 On request
Connection head made of die-cast light alloy with a hinged cover and a snap fastening
for protection and holding tubes of various dimensions.
XA

Head Type AUZH Connection (Xa) for

Raised hinged cover with a cheese-head the thermowell Protective Cable Approx.
screw (AUSH alternative) or the holding tube system outlet weight/g Article number
Hole 15.8 mm IP 54 M20 x 1.5 320 99-91300506-G015
Hole 22.8 mm IP 54 M20 x 1.5 320 99-91300506-G022
Hole 32.8 mm IP 54 M20 x 1.5 320 99-91300506-G032
Thread M24 x 1.5 IP 65 M20 x 1.5 320 99-91300506-GM24
125

Thread M22 x 1.5 IP 65 M20 x 1.5 320 99-91300506-GM22

56.5

Connection head made of die-cast light alloy with a hinged cover for protection and holding
tubes of various dimensions.
This connection head is suitable for the installation of a head transmitter in the cover.
XA

Edition english Product group 99-EZT

002 Page 
Connection heads Type B, B-h, BUZ, BUS Günther GmbH · Temperaturmesstechnik
and BUZH

Head Type B Connection (Xa) for

Small, slanted head with a fitted the thermowell Protective Cable Approx.
removable cover (screwed)
or the holding tube system outlet weight/g Article number
Hole 10.8 mm IP 53 M20 x 1.5 195 98-91300706-G010
Hole 15.8 mm IP 53 M20 x 1.5 195 98-91300706-G015
Thread M24 x 1.5 IP 53 M20 x 1.5 190 98-91300706-GM24
G 1/2 I IP 53 M20 x 1.5 190 On request
75

Connection head made of die-cast light alloy for the protection and holding
50 tubes of various dimensions.

XA

Head Type B-h (high) Connection (Xa) for

Small, slanted head with a fitted the thermowell Protective Cable Approx.
removable cover (screwed)
or the holding tube system outlet weight/g Article number
Hole 10.8 mm IP 53 M20 x 1.5 160 98-91301206-G010
Hole 15.8 mm IP 53 M20 x 1.5 160 98-91301206-G015
Thread M24 x 1.5 IP 53 M20 x 1.5 160 98-91301206-GM24
G 1/2 I IP 53 M20 x 1.5 160 On request
80

Connection head made of die-cast light alloy for the protection and holding tubes
45

of various dimensions (generally used for right-angle thermocouples).

XA

Head Type BUZ Connection (Xa) for

Spherical head with a hinged cover the thermowell Protective Cable Approx.
and a cheese-head screw
or the holding tube system outlet weight/g Article number
Hole 15.3 mm IP 54 M20 x 1.5 220 99-91300906-G015
Hole 22.5 mm IP 54 M20 x 1.5 210 99-91300906-G022
Thread M24 x 1.5 IP 65 M20 x 1.5 210 99-91300906-GM24
G 1/2 I IP 65 M20 x 1.5 215 99-91300906-GG12
85

Connection head made of die-cast light alloy with a hinged cover for protection and holding
42

tubes of various dimensions.

XA

Head Type BUS Connection (Xa) for

Spherical head with a hinged cover
the thermowell Protective Cable Approx.
and a snap fastening
or the holding tube system outlet weight/g Article number
Hole 15.3 mm IP 54 M20 x 1.5 220 99-91300806-G015
Hole 22.5 mm IP 54 M20 x 1.5 210 99-91300806-G022
Thread M24 x 1.5 IP 65 M20 x 1.5 210 99-91300806-GM24
G 1/2 I IP 65 M20 x 1.5 215 99-91300806-GG12
85

Connection head made of die-cast light alloy with a hinged cover for protection and holding
42

tubes of various dimensions.

XA

Head Type BUZH Connection (Xa) for

Raised hinged cover with a cheese-head the thermowell Protective Cable Approx.
screw (BUSH alternative)
or the holding tube system outlet weight/g Article number
Hole 15.8 mm IP 54 M20 x 1.5 275 99-91301106-G015
Hole 22.8 mm IP 54 M20 x 1.5 270 99-91301106-G022
Thread M24 x 1.5 IP 65 M20 x 1.5 270 99-91301106-GM24
G 1/2 I IP 65 M20 x 1.5 275 99-91301106-GG12
110

Connection head made of die-cast light alloy with a hinged cover for protection and holding
tubes of various dimensions.
42

This connection head is suitable for the installation of a head transmitter in the cover.

XA

Edition english Product group 99-EZT

002 Page 
Connection heads Type L, NA, DL and E Günther GmbH · Temperaturmesstechnik

Connection head Type L Material: Lower part made of nickel-plated brass, cover made of aluminium
Cylindrical head with a slip lid Connection: Bracket clamp d = 8.2 mm *
Cable entry: PG 7
~ 39 Weight: approx. 80 g
Ø 24 Günther Art. no. 99-91301503-0008
* The bracket clamp serves to clamp the thermowell (ceramic, metal or quartz glass)

PG 7
53
18

Connection head Type NA Material: Die-cast light alloy Die-cast light alloy
Small spherical head with a hinged cover Connection: Ø 15.8 mm M24 x 1.5 thread
Cable entry: M20 x 1.5 / M22 x 1.5 mm M20 x 1.5 mm
Weight: approx. 165 g approx. 160 g
Günther Art no. 99-91301606-G015 99-91301606-GM24
99-91301607-G015
72

39

XA

Connection head Type DL Material: Die-cast light alloy Die-cast light alloy Die-cast light alloy
Small spherical head with a screw cover Connection: Female thread Male thread Ø 6.1 mm
M10 x 1 M20 x 0.75
Cable entry: PG 9 PG 9 PG 9
48
Ø Weight: approx. 70 g approx. 70 g approx. 70 g
Protection: IP 54 IP 54 IP 54
Günther Art. no. 99-91301702-GM10 99-91301702-GM20 99-91301702-G006
50

29
14

XA

The connection heads shown above are the most widely-used models.
Other models are available on request.

Edition english Product group 99-EZT

002 Page 
Connection sockets for connection heads, Günther GmbH · Temperaturmesstechnik
Type A and B

Socket A, standard Socket A, double Socket A, triple

For base thermocouples For base thermocouples For base thermocouples
from Ø 1.38 mm to Ø 3.0 mm from Ø 1.38 mm to Ø 3.0 mm up to Ø 1.6 mm
Art. no. 98-91540000-0002 Art. no. 98-91540000-0004 Art. no. 98-91540002-0006
16 16

55 12 55 12

58
46

46
46
Accessories: 1 washer 55 mm Accessories: 1 washer 55 mm Accessories: 1 washer 55 mm
2 fastening screws 2 fastening screws 2 fastening screws
(M4 x 18 mm with a washer (M4 x 18 mm with a washer (M4 x 20 mm with a washer
10 x 4.5 mm) 10 x 4.5 mm) 10 x4.5 mm)

Socket A, standard Socket A, double

With a test socket With a test socket
for base thermocouples for base thermocouples
Art. no. 98-91540003-0002 Art. no. 98-91540003-0004

55 55
46
46

10 10

Accessories: 1 washer 55 mm Accessories: 1 washer 55 mm

2 fastening screws 2 fastening screws
(M4 x 18 mm with a washer (M4 x 18 mm with a washer
10 x 4.5 mm) 10 x 4.5 mm)

Round socket, Type B, standard Round socket, Type B, double

for sheath thermocouples for sheath thermocouples
Art. no. 99-91550000-0002 Art. no. 99-91550000-0004
46
46

~ 38 ~ 38

Accessories: 1 washer 55 mm made Accessories: 1 washer 55 mm made

of VA steel (2 mm thick) of VA steel (2 mm thick)
2 fastening screws 2 fastening screws
(M4 x 18 mm with a washer (M4 x 18 mm with a washer
10 x 4.5 mm) 10 x 4.5 mm)

Edition english Product group 99-EZT

002 Page 
Connection sockets for connecton heads, Günther GmbH · Temperaturmesstechnik
Type A and B

Socket A, standard Socket A, double Socket A, triple

For precious metal thermocouples For precious metal thermocouples For precious metal thermocouples
Art. no. 98-91540001-0002 Art. no. 98-91540001-0004 Art. no. 98-91540002-0006

55 55
46

46

56
46
10 10

Accessories: 1 washer 55 mm Accessories: 1 washer 55 mm Accessories: 1 washer 55 mm

2 fastening screws 2 fastening screws 2 fastening screws
(M4 x 18 mm with a washer (M4 x 18 mm with a washer (M4 x 20 mm with a washer
10 x 4.5 mm) 10 x 4.5 mm) 10 x 4.5 mm)
1 retaining spring 1 retaining spring 1 retaining spring

Socket B, standard Socket B, double Socket B, standard

For base thermocouples For base thermocouples For precious metal thermocouples
from Ø 0.5 mm to Ø 2.0mm from Ø 0.5 mm to Ø 2.0 mm
Art. no. 98-91550000-0002 Art. no. 98-91550000-0004 Art. no. 98-91550001-0002

40
40
40

33 33 33

Accessories: 1 washer 42 mm Accessories: 1 washer 42 mm Accessories: 1 washer 42 mm

2 fastening screws 2 fastening screws 2 fastening screws
(M4 x 18 mm with a washer (M4 x 18 mm with a washer (M4 x 18 mm with a washer
10 x 4.5 mm) 10 x 4.5 mm) 10 x 4.5 mm)

Socket B, double Socket B, standard Socket B, double

For precious metal thermocouples (2 sheath clamps) (4 sheath clamps)

Art. no. 98-91550001-0004 Art. no. 98-91550010-0002 Art. no. 98-91550010-0004

40

33

Accessories: 1 washer 42 mm Accessories: 1 washer 40 mm Accessories: 1 washer 40 mm

2 fastening screws 2 fastening screws 2 fastening screws
(M4 x 18 mm with a washer M4 x 16 mm, each M4 x 16 mm, each with
10 x 4.5 mm) with 1 washer 7 x 4.2 mm 1 washer 7 x 4.2 mm

Edition english Product group 99-EZT

002 Page 
Plug-and-socket connectors (plugs, couplers Günther GmbH · Temperaturmesstechnik
and assembly elements) “Standard” model

Standard plugs

Application:
Plug-and-socket connectors for the measuring circuits of
thermocouples and resistance thermometers. Solid pins
ensure a reliable connection.

Mechanical structure:
– Casing made of plastic filled with fibre glass
– Pins and sleeves thermally stress-relieved
– Solid pins and spring-loaded sockets
– Reverse voltage protection through various pin thicknesses
– Central cover fastening facilitates assembly
– Internally separated conductors prevent short circuits
– Terminal screws enable fast connections

Conductor cross-section:
– Secure clamping from Ø 0.2 mm to Ø 2.0 mm
Standard couplers – Max. cable diameter of 8.0 mm

Thermal load:
– Max. 200°C

Code colours for the casing:

– All of the international colour codes are available:
DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Accessories:
– Strain reliefs, gaskets, splash protection, etc.

Type J/L K S B N
Contact + Fe NiCr Cu Cu Nicrosil
Contact - CuNi Ni Alloy#11 Cu Nisil

DIN IEC 584 colour coding

Casing colour Black (type J) Green Orange Grey Pink
Plug 99-91440010-HJ00 99-91440010-HK00 99-91440010-HS00 99-91440010-HB00 99-91440010-HN00
Coupler 99-91441010-HJ00 99-91441010-HK00 99-91441010-HS00 99-91441010-HB00 99-91441010-HN00

DIN 43710 colour coding

Casing colour Blue (type L) Green - White -
Plug 99-91440020-HL00 99-91440020-HK00 - On request -
Coupler 99-91441020-HL00 99-91442020-HK00 - On request -

ANSI colour coding

Casing colour Black Yellow Green White Orange
Plug On request 99-91440030-HK00 99-91440030-HS00 On request On request
Coupler On request 99-91441030-HK00 99-91441030-HS00 On request On request

The strain relief (accessories) fixes cables of varying diameters onto the plugs and the couplers.
Strain relief Art. no. 99-91444000-0000
Assembly is carried out by means of screwing it into the female thread in the plug-and-socket connector.

Edition english Product group 99-EZT

002 Page 
Plug-and-socket connectors (plugs, couplers Günther GmbH · Temperaturmesstechnik
and assembly elements) “Standard” model

Standard high-temperature plugs

Application:
Plug-and-socket connectors for the measuring circuits of
thermocouples and resistance thermometers. Solid pins
ensure a reliable connection.

Mechanical structure:
– Casing made of temperature-resistant special plastic for high
ambient temperatures
– Pins and sleeves thermally stress-relieved
– Solid pins and spring-loaded sockets
– Reverse voltage protection through various pin thicknesses
– Central cover fastening facilitates assembly
– Internally separated conductors prevent short circuits
– Terminal screws enable fast connections

Conductor cross-section:
– Secure clamping from Ø 0.2 mm to Ø 2.0 mm
Standard high-temperature couplers – Max. cable diameter of 8.0 mm

Thermal load:
– Max. 350°C

Colour coding:
– Casing brown, with element code

Type J/L K S B N
Contact + Fe NiCr Cu Cu Nicrosil
Contact - CuNi Ni Alloy#11 Cu Nisil

Plug On request 99-91460010-HK00 99-91460010-HS00 99-91460010-HB00 99-91460010-HN00

Coupler On request 99-91461010-HK00 99-91461010-HS00 99-91461010-HB00 99-91461010-HN00

Standard ceramic plugs/couplers

Application:
Plug-and-socket connectors for the measuring circuits of
thermal elements and resistance thermometers. Solid pins
ensure a reliable connection.

Mechanical structure:
– Ceramic casing for extremely high ambient
temperatures
– Pins and sleeves thermally stress-relieved
– Solid pins and spring-loaded sockets
– Reverse voltage protection through various pin
thicknesses
– Central cover fastening facilitates assembly
– Internally separated conductors prevent short circuits
– Terminal screws enable fast connections

Conductor cross-section:
Type K S B – Secure clamping from Ø 0.2 mm to Ø 2.0 mm
Contact + NiCr Cu Cu – Max. cable diameter of 8.0 mm
Contact - Ni Alloy#11 Cu
Thermal load:
– Max. 650°C
Plug 99-91480010-HK00 99-91480010-HS00 99-91480010-HB00
Coupler 99-91481010-HK00 99-91481010-HS00 99-91481010-HB00 Colour coding:
– Casing white, with element code

Edition english Product group 99-EZT

002 Page 
Plug-and-socket connectors (plugs and couplers) Günther GmbH · Temperaturmesstechnik
“Miniature” model

Miniature plugs
Application:
Plug-and-socket connectors for the measuring circuits of
thermocouples and resistance thermometers. Solid pins
ensure a reliable connection.

Mechanical structure:
– Casing made of plastic filled with fibre glass
– Pins and sleeves thermally stress-relieved
– Solid pins and spring-loaded sockets
– Reverse voltage protection through various pin widths
– Central cover fastening facilitates assembly
– Internally separated conductors prevent short circuits
– Terminal screws enable fast connections

Conductor cross-section:
– Secure clamping from Ø 0.1 mm to Ø 0.6 mm
– Max. cable diameter of 4.5 mm

Miniature couplers Thermal load:

– Max. 200°C

Code colours for the casing:

– All of the international colour codes are available:
DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Accessories:
– Strain reliefs, gaskets, splash protection, etc.

Type J/L K S B N
Contact + Fe NiCr Cu Cu Nicrosil
Contact - CuNi Ni Alloy#11 Cu Nisil

DIN IEC 584 colour coding

Casing colour Black (type J) Green Orange Grey Pink
Plug 99-91450010-HJ00 99-91450010-HK00 99-91450010-HS00 99-91450010-HB00 99-91450010-HN00
Coupler 99-91451010-HJ00 99-91451010-HK00 99-91451010-HS00 99-91451010-HB00 99-91451010-HN00

DIN 43710 colour coding

Casing colour Blue (type L) Green - White -
Plug 99-91450020-HL00 99-91450020-HK00 - On request -
Coupler 99-91451020-HL00 99-91451020-HK00 - On request -

ANSI colour coding

Casing colour Black Yellow Green White Orange
Plug On request 99-91450030-HK00 99-91450030-HS00 On request On request
Coupler On request 99-91451030-HK00 99-91451030-HS00 On request On request

Edition english Product group 99-EZT

002 Page 
Plug-and-socket connectors (plugs and couplers) Günther GmbH · Temperaturmesstechnik
“Miniature” model

Miniature high-temperature plugs

Application:
Plug-and-socket connectors for the measuring circuits of
thermocouples and resistance thermometers. Solid pins
ensure a reliable connection.

Mechanical structure:
– Casing made of temperature-resistant special plastic
for high ambient temperatures
– Pins and sleeves thermally stress-relieved
– Solid pins and spring-loaded sockets
– Reverse voltage protection through various pin widths
– Central cover fastening facilitates assembly
– Internally separated conductors prevent short circuits
– Terminal screws enable fast connections

Conductor cross-section:
Miniature high-temperature couplers – Secure clamping from Ø 0.1 mm to Ø 0.6 mm
– Max. cable diameter of 4.5 mm

Thermal load:
– Max. 350°C

Colour coding:
– Casing brown, with element code

Type J/L K S B N
Contact + Fe NiCr Cu Cu Nicrosil
Contact - CuNi Ni Alloy#11 Cu Nisil

Plug On request 99-91470010-HK00 99-91470010-HS00 99-91470010-HB00 99-91470010-HN00

Coupler On request 99-91471010-HK00 99-91471010-HS00 99-91471010-HB00 99-91471010-HN00

Miniature ceramic plugs/couplers

Application:
Plug-and-socket connectors for the measuring circuits of
thermocouples and resistance thermometers. Solid pins
ensure a reliable connection.

Mechanical structure:
– Ceramic casing for extremely high ambient
temperatures
– Pins and sleeves thermally stress-relieved
– Solid pins and spring-loaded sockets
– Reverse voltage protection through various pin widths
– Central cover fastening facilitates assembly
– Internally separated conductors prevent short circuits
– Terminal screws enable fast connections

Conductor cross-section:
Type J/L K S – Secure clamping from Ø 0.1 mm to Ø 0.5 mm
Contact + Fe NiCr Cu – Max. cable diameter of 3.6 mm
Contact - CuNi Ni Alloy#11
Thermal load:
– Max. 650°C
Plug On request 99-91490010-HK00 99-91490010-HS00
Coupler On request 99-91491010-HK00 99-91491010-HS00 Colour coding:
– Casing white, with element code

Edition english Product group 99-EZT

002 Page 
Plug-and-sockets (panels) Günther GmbH · Temperaturmesstechnik
“Standard” model

Standard panels – horizontal Standard panels - vertical

Horizontal model
Type D
imensions J to IEC L to DIN K to IEC
Colour [mm] “black” “blue” “green”
1 measuring circuit 38 x 38 98-91442111-HJ01 98-91442121-HL01 98-91442111-HK01
6 measuring circuits 146 x 67 98-91442111-HJ06 98-91442121-HL06 98-91442111-HK06
12 measuring circuits 260 x 67 98-91442111-HJ12 98-91442121-HL12 98-91442111-HK12
24 measuring circuits 260 x 115 98-91442111-HJ24 98-91442121-HL24 98-91442111-HK24

Horizontal model
Type Dimensions S to IEC B to IEC N to IEC
Colour [mm] “orange” “grey” “violet”
1 measuring circuit 38 x 38 98-91442111-HS01 98-91442111-HB01 98-91442111-HN01
6 measuring circuits 146 x 67 98-91442111-HS06 98-91442111-HB06 98-91442111-HN06
12 measuring circuits 260 x 67 98-91442111-HS12 98-91442111-HB12 98-91442111-HN12
24 measuring circuits 260 x 115 98-91442111-HS24 98-91442111-HB24 98-91442111-HN24

Vertical model
Type Dimensions J to IEC L to DIN K to IEC
Colour [mm] “black” “blue” “green”
6 measuring circuits 72 x 116 98-91442211-HJ06 98-91442221-HL06 98-91442211-HK06

Vertical model
Type Dimensions S to IEC B to IEC N to IEC
Colour [mm] “orange” “grey” “violet”
6 measuring circuits 72 x 116 98-91442211-HS06 98-91442211-HB06 98-91442211-HN06

Application: Mechanical structure:

For permanent installation on control panels and casings of any – Aluminium front panel, anodised, protected against corrosion.
kind for inserting standard plugs. – Measuring circuits numbered, abrasion-resistant, smudge-proof
– Fastenings made of stainless steel and nickel-plated brass
Conductor cross-section: – Assembly and construction design prevent the assembled
– Secure clamping from Ø 0.2 mm to Ø 2.0 mm built-in couplers from being pushed in or pressed out.
– Slanted connection planes enable access for the wires to be
Thermal load: connected and disconnected while installed.
– Max. 200°C – Only a few screws need to be removed in order to replace
individual built-in couplers
– Standard panels for 1 to 6 measuring circuits

Edition english Product group 99-EZT

002 Page 10
Plug-and-sockets (panels) Günther GmbH · Temperaturmesstechnik
“Miniature” model

Miniature panels – horizontal:

Application:
For permanent installation on control panels and casings
of any kind for inserting miniature plugs.

Conductor cross-section:
– Secure clamping from Ø 0.1 mm to Ø 0.6 mm

Thermal load:
– Max. 200°C

Mechanical structure:
– Aluminium front panel, anodised, protected against corrosion
– Measuring circuits numbered, abrasion-resistant, smudge-proof
– Fastenings made of stainless steel and nickel-plated brass
– Assembly and construction design prevent the assembled
built-in couplers from being pushed in or pressed out.
– Slanted connection planes enable access for the wires to be
connected and disconnected while installed.
– Only a few screws need to be removed in order to replace
individual built-in couplers
– Standard panels for 1 to 6 measuring circuits

Type Dimensions J to IEC L to DIN K to IEC
Colour “black” “blue” “green”
1 measuring circuit 38 x 38 98-91452111-HJ01 98-91452121-HL01 98-91452111-HK01
6 measuring circuits 113 x 38 98-91452111-HJ06 98-91452121-HL06 98-91452111-HK06
12 measuring circuits 203 x 38 98-91452111-HJ12 98-91452121-HL12 98-91452111-HK12
24 measuring circuits 203 x 76 98-91452111-HJ24 98-91452121-HL24 98-91452111-HK24

Type Dimensions S to IEC B to IEC N to IEC
Colour “orange” “grey” “violet”
1 measuring circuit 38 x 38 98-91452111-HS01 98-91452111-HB01 98-91452111-HN01
6 measuring circuits 113 x 38 98-91452111-HS06 98-91452111-HB06 98-91452111-HN06
12 measuring circuits 203 x 38 98-91452111-HS12 98-91452111-HB12 98-91452111-HN12
24 measuring circuits 203 x 76 98-91452111-HS24 98-91452111-HB24 98-91452111-HN24

Standard miniature panel jacks – rectangular and round:

Application:
For permanent installation on control panels and casings
of any kind for inserting miniature plugs.

Conductor cross-section:
– Secure clamping from Ø 0.1 mm to Ø 0.6 mm

Thermal load:
– Max. 200°C

Type J to IEC L to DIN K to IEC
Colour “black” “blue” “green”
Rectangular 98-91456011-HJ00 98-91456021-HL00 98-91456011-HK00
Round 98-91456012-HJ00 98-91456022-HL00 98-91456012-HK00

Type S to IEC B to IEC N to IEC
Colour “orange” “grey” “violet”
Rectangular 98-91456011-HS00 98-91456011-HB00 98-91456011-HN00
Round 98-91456012-HS00 98-91456012-HB00 98-91456012-HN00

Edition english Product group 99-EZT

002 Page 11
Plug-and-socket connectors (type Lemo) Günther GmbH · Temperaturmesstechnik

Plug, Lemo*) Coupling, Lemo*)

L L
C

D
D
Lemo plug Size 0, L=34.5 mm D=9.0 mm C=4.2 mm Lemo coupler Size 0, L=33,5 mm D=8,9 mm C=4,2 mm

No. of poles Collet Article number No. of poles Collet Article number
2 4.2 mm - cable collet 98-91420202-0042 2 4.2 mm - cable collet 98-91420302-0042
2 4.7 mm - cable collet 98-91420202-0047 2 4.7 mm - cable collet 98-91420302-0047
2 1.6 mm - thermal collet 98-91420222-0016 2 1.6 mm - thermal collet 98-91420322-0016
2 2.1 mm - thermal collet 98-91420222-0021 2 2.1 mm - thermal collet 98-91420322-0021
2 3.0 mm - thermal collet 98-91420222-0030 2 3.0 mm - thermal collet 98-91420322-0030
4 4.2 mm - cable collet 98-91420204-0042 4 4.2 mm - cable collet 98-91420304-0042
4 4.7 mm - cable collet 98-91420204-0047 4 4.7 mm - cable collet 98-91420304-0047
4 1.6 mm - thermal collet 98-91420224-0016 4 1.6 mm - thermal collet 98-91420324-0016
4 2.1 mm - thermal collet 98-91420224-0021 4 2.1 mm - thermal collet 98-91420324-0021
4 3.0 mm - thermal collet 98-91420224-0030 4 3.0 mm - thermal collet 98-91420324-0030

Lemo plug Size 1, L=42,5 mm D=12,0 mm C=6,2 mm Lemo coupler Size 1, L=40,5 mm D=11,0 mm C=6,2 mm

No. of poles Collet Article number No. of poles Collet Article number
2 3.7 mm - cable collet 98-91421202-0037 2 3.7 mm - cable collet 98-91421302-0037
2 4.7 mm - cable collet 98-91421202-0047 2 4.7 mm - cable collet 98-91421302-0047
2 1.6 mm - thermal collet 98-91421222-0016 2 1.6 mm - thermal collet 98-91421322-0016
2 2.2 mm - thermal collet 98-91421222-0022 2 2.2 mm - thermal collet 98-91421322-0022
2 3.1 mm - thermal collet 98-91421222-0031 2 3.1 mm - thermal collet 98-91421322-0031
2 4.6 mm - thermal collet 98-91421222-0046 2 4.6 mm - thermal collet 98-91421322-0046
2 6.1 mm - thermal collet 98-91421222-0061 2 6.1 mm - thermal collet 98-91421322-0061
4 3.7 mm - cable collet 98-91421204-0037 4 3.7 mm - cable collet 98-91421304-0037
4 4.7 mm - cable collet 98-91421204-0047 4 4.7 mm - cable collet 98-91421304-0047
4 1.6 mm - thermal collet 98-91421224-0016 4 1.6 mm - thermal collet 98-91421324-0016
4 2.2 mm - thermal collet 98-91421224-0022 4 2.2 mm - thermal collet 98-91421324-0022
4 3.1 mm - thermal collet 98-91421224-0031 4 3.1 mm - thermal collet 98-91421324-0031
4 4.6 mm - thermal collet 98-91421224-0046 4 4.6 mm - thermal collet 98-91421324-0046
4 6.1 mm - thermal collet 98-91421224-0061 4 6.1 mm - thermal collet 98-91421324-0061

Lemo plug Size 2, L=52,0 mm D=14,8 mm C=8,5 mm Lemo coupler Size 2, L=50,0 mm D=14,8 mm C=8,5 mm

No. of poles Collet Article number No. of poles Collet Article number
2 5.2 mm - cable collet 98-91422202-0052 2 5.2 mm - cable collet 98-91422302-0052
2 7.2 mm - cable collet 98-91422202-0072 2 5.2 mm - cable collet 98-91422302-0072
2 3.1 mm - thermal collet 98-91422222-0031 2 3.1 mm - thermal collet 98-91422322-0031
2 4.6 mm - thermal collet 98-91422222-0046 2 4.6 mm - thermal collet 98-91422322-0046
2 6.1 mm - thermal collet 98-91422222-0061 2 6.1 mm - thermal collet 98-91422322-0061
4 5.2 mm - cable collet 98-91422204-0042 4 5.2 mm - cable collet 98-91422304-0042
4 7.2 mm - cable collet 98-91422204-0047 4 7.2 mm - cable collet 98-91422304-0047
4 3.1 mm - thermal collet 98-91422224-0031 4 3.1 mm - thermal collet 98-91422324-0031
4 4.6 mm - thermal collet 98-91422224-0046 4 4.6 mm - thermal collet 98-91422324-0046
4 6.1 mm - thermal collet 98-91422224-0061 4 6.1 mm - thermal collet 98-91422324-0061

Lemo plugs and couplers for connection to sheath thermo- *) Lemo plug-and-socket connections Size 3 and panel jacks
couples, resistance thermometers and supply lines Sizes 1 and 2 available on request.
Case: Chromium-plated brass
Contacts: Gold-plated brass
Insulation: PEEK
Max. temperature: 250°C

Edition english Product group 99-EZT

002 Page 12
Ceramic tubes and insulation rods Günther GmbH · Temperaturmesstechnik
for thermocouples

Models:
Open on both ends, closed on one end, open on both ends with a flange, closed on one end with a flange. We supply thermocouple
thermowells, insulation rods and short insulation tubes for thermocouples made of the materials ALSINT 99.7 = TYPE C 799, PYTHAGORAS
= TYPE C 610 and SILLIMANTIN 60 = TYPE C 530
Tolerances in accordance with DIN 40 680 are maintained. Tighter tolerances on request.

Properties Dim. Alsint 99.7 Pythagoras Sillimantin 60

Type acc. to DIN VDE 0335 C 799 C 610 C 530
Chemical composition AL2O3 % 99,7 60 80
Type of body Gasproof Gasproof Porous
Bulk density g/cm³ 3.8 2.7 2.4
Application limit °C 1750 1600 1500
Thermal conductivity 20-100°C W/mK 25 5 2
Resistance to temperature changes Medium to good Good Very good
Special electrical resistance at RT Ω 1 x 1014 1 x 1013 -
Special electrical resistance at 600°C 1 x 108 1 x 106 1 x 106

Ceramic protection tube closed on one end:

External Ø x Internal Ø

Length L = YYYY

Insulation rod with 2, 4 or 5 holes:

Ø

Length L = YYYY

2 holes 4 holes 5 holes SPLIT

Ceramic tube open at both ends:

External Ø x Internal Ø

Length L = YYYY

Edition english Product group 99-EZT

002 Page 13
Ceramic thermowells for thermocouples Günther GmbH · Temperaturmesstechnik

Ceramic thermowells closed on one end:

Alsint 99.7 – C799 Pythagoras – C610
Dimensions Ø Da x Di x L mm Article number Dimensions Ø Da x Di x L mm Article number
Ø 10 x 6 x 530 80-21100060-0530 Ø 10 x 7 x 530 80-11100070-0530
Ø 10 x 6 x 740 80-21100060-0740 Ø 10 x 7 x 740 80-11100070-0740
Ø 10 x 6 x 1030 80-21100060-1030 Ø 10 x 7 x 1030 80-11100070-1030
Ø 10 x 6 x 1430 80-21100060-1430 Ø 10 x 7 x 1430 80-11100070-1430
Ø 15 x 10 x 530 80-21150100-0530 Ø 15 x 11 x 530 80-11150110-0530
Ø 15 x 10 x 740 80-21150100-0740 Ø 15 x 11 x 740 80-11150110-0740
Ø 15 x 10 x 1030 80-21150100-1030 Ø 15 x 11 x 1030 80-11150110-1030
Ø 15 x 10 x 1430 80-21150100-1430 Ø 15 x 11 x 1430 80-11150110-1430
Ø 16 x 12 x 530 80-21160120-0530 Ø 16 x 12 x 530 80-11160120-0530
Ø 16 x 12 x 740 80-21160120-0740 Ø 16 x 12 x 740 80-11160120-0740
Ø 16 x 12 x 1030 80-21160120-1030 Ø 16 x 12 x 1030 80-11160120-1030
Ø 16 x 12 x 1430 80-21160120-1430 Ø 16 x 12 x 1430 80-11160120-1430
Ø 24 x 18 x 530 80-21240180-0530 Ø 24 x 19 x 530 80-11240190-0530
Ø 24 x 18 x 740 80-21240180-0740 Ø 24 x 19 x 740 80-11240190-0740
Ø 24 x 18 x 1030 80-21240180-1030 Ø 24 x 19 x 1030 80-11240190-1030
Ø 24 x 18 x 1430 80-21240180-1430 Ø 24 x 19 x 1430 80-11240190-1430

Sillimantin 60 – C530
Dimensions Ø Da x Di x L mm Article number
Ø 26 x 18 x 530 80-01260180-0530
Ø 26 x 18 x 740 80-01260180-0740
Ø 26 x 18 x 1530 80-01260180-1530
Ø 26 x 18 x 1230 80-01260180-1230
Ø 26 x 18 x 1430 80-01260180-1430

Comment: Ceramic tubes open on both ends are available in the same dimensions. Special dimensions – on request !

Insulation rods:
Alsint 99.7 – C799 Pythagoras – C610
Dimensions Ø Da x Di x L mm Article number Dimensions Ø Da x Di x L mm Article number
Ø 5.5 x 1.2 x 560 (2 holes) 81-02205512-0560 Ø 5.5 x 1.2 x 560 (2 holes) 81-01205512-0560
Ø 5.5 x 1.2 x 770 (2 holes) 81-02205512-0770 Ø 5.5 x 1.2 x 770 (2 holes) 81-01205512-0770
Ø 5.5 x 1.2 x 1060 (2 holes) 81-02205512-1060 Ø 5.5 x 1.2 x 1060 (2 holes) 81-01205512-1060
Ø 5.5 x 1.2 x 1460 (2 holes) 81-02205512-1460 Ø 5.5 x 1.2 x 1460 (2 holes) 81-01205512-1460
Ø 5.5 x 1.2 x 560 (4 holes) 81-02405512-0560 Ø 5.5 x 1.2 x 560 (4 holes) 81-01405512-0560
Ø 5.5 x 1.2 x 770 (4 holes) 81-02405512-0770 Ø 5.5 x 1.2 x 770 (4 holes) 81-01405512-0770
Ø 5.5 x 1.2 x 1060 (4 holes) 81-02405512-1060 Ø 5.5 x 1.2 x 1100 (4 holes) 81-01405512-1060
Ø 5.5 x 1.2 x 1460 (4 holes) 81-02405512-1460 Ø 5.5 x 1.2 x 1460 (4 holes) 81-01405512-1460
Ø 8.5 x 1.5 x 560 (2 holes) 81-02208515-0560 Ø 8.5 x 1.5 x 560 (4 holes) 81-01408515-0560
Ø 8.5 x 1.5 x 770 (2 holes) 81-02208515-0770 Ø 8.5 x 1.5 x 770 (4 holes) 81-01408515-0770
Ø 8.5 x 1.5 x 1060 (2 holes) 81-02208515-1060 Ø 8.5 x 1.5 x 1060 (4 holes) 81-01408515-1060
Ø 8.5 x 1.5 x 1460 (2 holes) 81-02208515-1460 Ø 8.5 x 1.5 x 1460 (4 holes) 81-01408515-1460
Ø 8.5 x 1.5 x 560 (4 holes) 81-02408515-0560 Ø 8.5 x 1.5 x 560 (5 holes) 81-01508515-0560
Ø 8.5 x 1.5 x 770 (4 holes) 81-02408515-0770 Ø 8.5 x 1.5 x 770 (5 holes) 81-01508515-0770
Ø 8.5 x 1.5 x 1060 (4 holes) 81-02408515-1060 Ø 8.5 x 1.5 x 1060 (5 holes) 81-01508515-1060
Ø 8.5 x 1.5 x 1460 (4 holes) 81-02408515-1460 Ø 8.5 x 1.5 x 1460 (5 holes) 81-01508515-1460

The insulation rods are available with one or with two slits for the welded measuring point if required.
Comment: The thermowells and insulation rods specified above are a selection of the most
widely-used dimensions. We will gladly make an offer for any other lengths or dimensions you may
require.

Edition english Product group 99-EZT

002 Page 14
Metal thermowells for thermocouples Günther GmbH · Temperaturmesstechnik

The metal thermowells specified in this section are limited to those made of the most-widely used materials.
Tubes of this kind are used for standard temperature measurements, mainly in gaseous and liquid media. The choice of thermowell will
depend on the space available, the type of fastening and stresses caused by temperatures, pressure, flows and chemical corrosion.

Model with a semi-circular, closed base, the tube is seamlessly extruded or it has welded joints
Outer Ø x w

w
L = XXXX *)

Model with a closed round base, the tube is seamlessly extruded or it has welded joints
Outer Ø x w

w
L = XXXX *)

Material / Dimensions / Model Properties / Article number

1.0305 - Tube with a welded base, seamlessly extruded Mostly air case-hardened; low resistance to sulphurous gases,
medium resistance to nitrogenous gases.
Thermal stability up to 550°C
15 x 2 mm 82-50041500-xxxx.0200 *)
22 x 2 mm 82-50042200-xxxx.0200

1.4541 - Tube with welded base, seamlessly extruded High degree of corrosion-resistance to numerous aggressive
media such as combustion gases. Resistant to particle
decomposition in accordance with DIN 50914, to 700°C
11 x 1 mm 82-50101100-xxxx.0100
15 x 2 mm 82-50101500-xxxx.0200
22 x 2 mm 82-50102200-xxxx.0200

1.4571 - Tube with a welded base, seamlessly extruded As 1.4541, but also corrosion-resistant to certain acids such
as phosphoric, acetic and sulphuric acid due to the addition
of approx. 2% molybdenum. Resistant to pitting, up to 700°C
9 x 1 mm 82-50010900-xxxx.0100
10 x 1.5 mm 82-50011000-xxxx.0150
11 x 1 mm 82-50011100-xxxx.0100
11 x 2 mm 82-50011100-xxxx.0200
15 x 2 mm 82-50011500-xxxx.0200
15 x 3 mm 82-50011500-xxxx.0300
22 x 2 mm 82-50012200-xxxx.0200

*) xxxx stands for the overall length of the required thermowell in mm.

Edition english Product group 99-EZT

002 Page 15
Metal thermowells for thermocouples Günther GmbH · Temperaturmesstechnik

Material / Dimensions / Model Properties / Article number

1.4762 - Tube with semi-circular closed base, welded joints Good resistance properties to sulphurous gases; low
resistance to nitrogenous gases, up to 1200°C
15 x 2 mm 82-30021500-xxxx.0200 *)
22 x 2 mm 82-30022200-xxxx.0200

1.4762 - Tube with welded base, welded joints Good resistance properties against sulphurous gases; low
resistance to nitrogenous gases, up to 1200°C
15 x 2 mm 82-20021500-xxxx.0200
22 x 2 mm 82-20022200-xxxx.0200

1.4841 - Tube with semi-circular closed base, welded joints Good resistance properties when used in nitrogenous gases;
low resistance to sulphurous gases, operation temperature up
to 1150°C
15 x 2 mm 82-30031500-xxxx.0200
22 x 2 mm 82-30032200-xxxx.0200

1.4841 - Tube with welded base, welded joints Good resistance properties when used in nitrogenous gases; low
resistance to sulphurous gases, operation temperature up to 1150°C
15 x 2 mm 82-30031500-xxxx.0200
15 x 2 mm 82-20031500-xxxx.0200
22 x 2 mm 82-20032200-xxxx.0200

1.4893 - Tube with semi-circular closed base, welded joints Extremely good resistance properties in a reducing sulphurous
atmosphere. Very good resistance properties in an oxidising
atmosphere. Good resistance properties against corrosion
caused by combustion ash, in copper, lead and zinc molten
metals, up to 1150°C
24 x 3 mm 82-60072400-xxxx.0300
26 x 4 mm 82-60072600-xxxx.0400

2.4816 - Tube with welded base, seamlessly extruded Good general corrosion resistance properties, resistant to
stress corrosion cracking. Excellent resistance properties
against oxidation. Not recommendable for gases containing
CO2 and sulphur above 550°C and sodium above 750°C.
Stable in air up to 1100°C.
14 x 2 mm 82-50081400-xxxx.0200
22 x 2 mm 82-50082200-xxxx.0200

*) xxxx stands for the overall length of the required thermowell in mm.

Edition english Product group 99-EZT

002 Page 16
Base-metal thermocouples Günther GmbH · Temperaturmesstechnik

a) Base-metal thermocouples with both limbs insulated with single-hole insulation tubes for thermo-
couples in product groups 00-TMT and 05-TKT

L = XXXX

Type NiCr-Ni/K DIN IEC 584

Diameter Insulation Max. temp. Continuous temp. Article number
1.0 mm Single-hole tube 2.7 x 1.7 x 50 mm C610 1000°C 800°C On request
1.38 mm Single-hole tube 4 x 2 x 50 mm C610 1100°C 900°C 94-211382xx-xxxx
1.5 mm Single-hole tube 4 x 2 x 50 mm C610 1100°C 900°C 94-211502xx-xxxx
2.0 mm Single-hole tube 4.5 x 2.5 x 50 mm C610 1200°C 1000°C 94-212002xx-xxxx
3.0 mm Single-hole tube 6 x 4 x 50 mm C610 1200°C 1000°C 94-213002xx-xxxx

Type Fe-CuNi/L DIN 43710

1.5 mm Single-hole tube 4 x 2 x 50 mm C610 800°C 600°C 94-221502xx-xxxx
2.0 mm Single-hole tube 4 x 2 x 50 mm C610 900°C 700°C 94-222002xx-xxxx
3.0 mm Single-hole tube 4 x 2 x 50 mm C610 900°C 700°C 94-223002xx-xxxx

Type Nicrosil-Nisil/N DIN IEC 584

1.5 mm Single-hole tube 4 x 2 x 50 mm C610 1100°C 1000°C 94-241502xx-xxxx
2.0 mm Single-hole tube 4 x 2 x 50 mm C610 1200°C 1100°C 94-242002xx-xxxx
3.0 mm Single-hole tube 4 x 2 x 50 mm C610 1200°C 1100°C 94-243002xx-xxxx

b) Base-metal thermocouples with one limb insulated for thermocouples

in product groups 00-TMT and 05-TKT

L = XXXX

Type NiCr-Ni/K DIN IEC 584

Diameter Insulation Max. temp. Continuous temp. Article number
1.0 mm Single-hole tube 2.7 x 1.7 x 50 mm C610 1000°C 800°C 94-211002xx-xxxx
1.38 mm Single-hole tube 4 x 2 x 50 mm C610 1100°C 900°C 94-211382xx-xxxx
1.5 mm Single-hole tube 4 x 2 x 50 mm C610 1100°C 900°C 94-212002xx-xxxx
2.0 mm Single-hole tube 4.5 x 2.5 x 50 mm C610 1200°C 1000°C 94-212002xx-xxxx
3.0 mm Single-hole tube 6 x 4 x 50 mm C610 1200°C 1000°C 94-213002xx-xxxx

Edition english Product group 99-EZT

002 Page 17
Base-metal thermocouples Günther GmbH · Temperaturmesstechnik
Precious-metal thermocouples

a) Base-metal thermocouples with both limbs insulated with two-hole insulation tubes for thermo-
couples in product groups 00-TMT and 05-TKT

L = XXXX

Type NiCr-Ni/K DIN IEC 584

Diameter Insulation Max. temp. Continuous temp. Article number
1.0 mm 2-hole tube C610 1000°C 800°C On request
1.38 mm 2-hole tube C610 1100°C 900°C 94-211382xx-xxxx
1.5 mm 2-hole tube C610 1100°C 900°C 94-211502xx-xxxx
2.0 mm 2-hole tube C610 1200°C 1000°C 94-212002xx-xxxx
3.0 mm 2-hole tube C610 1200°C 1000°C 94-213002xx-xxxx

Type Fe-CuNi/L DIN 43710

1.5 mm 2-hole tube C610 800°C 600°C 94-221502xx-xxxx
2.0 mm 2-hole tube C610 900°C 700°C 94-222002xx-xxxx
3.0 mm 2-hole tube C610 900°C 700°C 94-223002xx-xxxx

Precious-metal thermocouples
b) Precious-metal thermocouples, not insulated, for thermocouples in product groups 00-TMT
and 05-TKT

L = XXXX

Diameter Insulation Max. temp. Continuous temp. Article number

0.35 mm PtRh13-Pt/R 1450°C 1300°C 94-110351xx-xxxx
0.5 mm PtRh13-Pt/R 1600°C 1500°C 94-110501xx-xxxx
0.35 mm PtRh10-Pt/S 1450°C 1300°C 94-100351xx-xxxx
0.5 mm PtRh10-Pt/S 1600°C 1500°C 94-100501xx-xxxx
0.35 mm PtRh30-PtRh6/B 1600°C 1500°C 94-120351xx-xxxx
0.5 mm PtRh30-PtRh6/B 1800°C 1650°C 94-120501xx-xxxx

Edition english Product group 99-EZT

002 Page 18
Fasteners Günther GmbH · Temperaturmesstechnik

A) Stop flange
for fastening the thermal sensor
to the wall of the installation point

9.5

B
d3
d2
C
A

8
32
- Material: grey cast iron
- Movable
- Not gasproof

A B C d2 d3 Article number
Diameter
Thermowell
or Holding tube
[mm]
15 75 50 55 26 16 89-11015001-0000
22 90 65 70 33 23 89-11022001-0000
26 to 29 90 65 70 35 29 89-11026001-0000
32 90 65 70 43 33 89-11032001-0000

B) Counter flange
in connection with the stop A

flange for gasproof installation of

~5

the thermal sensor. The counter-

6

flange is welded to the wall of the

installation point.
40

d1

- Material: steel

A B C d 1 d 2 d3 Article number
Diameter
Metal
thermowell
[mm]
15 75 50 55 28 35 17 89-21015001-0000
22 90 65 70 39 43 24 89-21022001-0000
26 90 65 70 39 43 28 89-21026001-0000
32 90 65 70 39 43 34 89-21032001-0000

Edition english Product group 99-EZT

002 Page 19
Fasteners Günther GmbH · Temperaturmesstechnik

C) Mounting thread
Gasproof, for screwing into
the wall of the installation point

Tube-Ø Thread Length Length Collar SW1 SW2 Material/ Article number
d1 G L1 L2 D Surface
[mm] [mm] [mm] [mm] [mm]
12 G ½ A 16 60 27 27 27 Steel / zinc-coated 89-34212001-G012
15 G ½ A 16 60 30 30 27 Steel / zinc-coated 89-34215001-G012
15 G ½ A 16 60 27 27 27 Stainless steel 89-36115001-G012
15 G ¾ A 18 60 32 32 27 Steel / zinc-coated 89-34215001-G034
15 G ¾ A 18 60 32 27 27 Stainless steel 89-36115001-G034
22 G 1 A 20 65 40 46 41 Steel / untreated 89-32122001-G100
22 G 1 A 20 65 40 41 41 Steel / zinc-coated 89-34222001-G100
32 G 1¼ A 25 75 49 50 46 Steel / burnished 89-33132001-G114
32 G 1½ A 25 75 49 50 46 Steel / burnished 89-33132001-G112

Further information on request. Dimensions may deviate from those indicated.

D) Screw fastening for thermal sensors Ø 1.0 mm to Ø 10.0 mm

Gasproof, for screwing into
the wall of the installation point

The installation length for clamping rings

made of SS and steel can only be adjusted
once when the sleeve nut is tightened;
Teflon can be repeatedly adjusted.

Diameter Thread Length Length Collar Material/ Article number

d1 G L1 L2 D Surface
[mm] [mm] [mm] [mm]
Ø 1.0 Clamping ring, Teflon M 8 x 1 8 20 11,5 zinc-coated 89-44501001-MF08
Ø 1.5 Clamping ring, stainless steel M 8 x 1 8 20 11,5 Stainless steel 89-46401501-MF08
Ø 2.0 Clamping ring, Teflon M 8 x 1 8 20 11,5 zinc-coated 89-44502001-MF08
Ø 3.0 Clamping ring, stainless steel G ¼ A 12 25 18 Stainless steel 89-46403001-G014
Ø 4.5 Clamping ring, Teflon G ¼ A 12 25 18 zinc-coated 89-44504501-G014
Ø 6.0 Clamping ring, stainless steel G ½ A 14 30 26 Stainless steel 89-46406001-G012
Ø 8.0 Clamping ring, Teflon G ½ A 14 30 26 zinc-coated 89-44508001-G012
Ø 10.0 Clamping ring, stainless steel G ½ A 14 30 26 Stainless steel 89-44510001-G012

Further information on request. Dimensions may deviate from those indicated.

Edition english Product group 99-EZT

002 Page 20
Fasteners Günther GmbH · Temperaturmesstechnik

D) Screw fastening for thermal sensors Ø 1.0 mm to Ø 12.0 mm

Gasproof, for screwing into
the wall of the installation point

The installation length for clamping rings

made of SS and steel can only be adjusted
once when the sleeve nut is tightened;
Teflon can be repeatedly adjusted.

Diameter Thread Length Length Collar Material/ Article number

d1 G L1 L2 D Surface
[mm] [mm] [mm] [mm]
Ø 1.0 Clamping ring, Teflon M 8 x 1 8 20 11,5 Stainless steel 89-46501001-MF08
Ø 1.0 Clamping ring, stainless steel M 8 x 1 8 20 11,5 zinc-coated 89-44401001-MF08
Ø 1.5 Clamping ring, Teflon M 8 x 1 8 20 11,5 Stainless steel 89-46501501-MF08
Ø 1.5 Clamping ring, Teflon M 8 x 1 8 20 11,5 zinc-coated 89-44501501-MF08
Ø 1.5 Clamping ring, stainless steel M 8 x 1 8 20 11,5 Stainless steel 89-46401501-MF08
Ø 1.5 Clamping ring, stainless steel M 8 x 1 8 20 11,5 zinc-coated 89-44401501-MF08
Ø 2.0 Clamping ring, Teflon M 8 x 1 8 20 11,5 zinc-coated 89-44502001-MF08
Ø 2.0 Clamping ring, Teflon M 8 x 1 8 20 11,5 Stainless steel 89-46502001-MF08
Ø 3.0 Clamping ring, Teflon M 8 x 1 8 20 11,5 Stainless steel 89-46503001-MF08
Ø 3.0 Clamping ring, Teflon M 8 x 1 8 20 11,5 zinc-coated 89-44503001-MF08
Ø 3.0 Clamping ring, stainless steel M 8 x 1 8 20 11,5 Stainless steel 89-46403001-MF08
Ø 3.0 Clamping ring, stainless steel M 8 x 1 8 20 11,5 zinc-coated 89-44403001-MF08
Ø 3.0 Clamping ring, Teflon G A 8 20 11,5 Stainless steel 89-46503001-G018
Ø 3.0 Clamping ring, Teflon G ¼ A 12 25 18 Stainless steel 89-46503001-G014
Ø 3.0 Clamping ring, Teflon G ¼ A 12 25 18 zinc-coated 89-44503001-G014
Ø 3.0 Clamping ring, stainless steel G ¼ A 12 25 18 Stainless steel 89-46403001-G014
Ø 3.0 Clamping ring, stainless steel G ¼ A 12 25 18 zinc-coated 89-44403001-G014
Ø 3.0 Clamping ring, Teflon G ½ A 14 30 26 Stainless steel 89-46503001-G012
Ø 3.0 Clamping ring, stainless steel G ½ A 14 30 26 Stainless steel 89-46403001-G012
Ø 4.5 Clamping ring, Teflon G ¼ A 12 25 18 Stainless steel 89-46504501-G014
Ø 4.5 Clamping ring, Teflon G ¼ A 12 25 18 zinc-coated 89-44504501-G014
Ø 4.5 Clamping ring, stainless steel G ¼ A 12 25 18 Stainless steel 89-46404501-G014
Ø 4.5 Clamping ring, stainless steel G ¼ A 12 25 18 zinc-coated 89-44404501-G014
Ø 4.5 Clamping ring, Teflon G ½ A 12 25 18 Stainless steel 89-46504501-G012
Ø 4.5 Clamping ring, Teflon G ½ A 12 25 18 zinc-coated 89-44504501-G012
Ø 4.5 Clamping ring, stainless steel G ½ A 12 25 18 Stainless steel 89-46404501-G012
Ø 6.0 Clamping ring, Teflon G ¼ A 12 25 18 Stainless steel 89-46506001-G014
Ø 6.0 Clamping ring, Teflon G ¼ A 12 25 18 zinc-coated 89-44506001-G014
Ø 6.0 Clamping ring, stainless steel G ¼ A 12 25 18 Stainless steel 89-46406001-G014
Ø 6.0 Clamping ring, stainless steel G ¼ A 12 25 18 zinc-coated 89-44406001-G014
Ø 6.0 Clamping ring, Teflon G ½ A 12 25 18 Stainless steel 89-46506001-G012
Ø 6.0 Clamping ring, Teflon G ½ A 12 25 18 zinc-coated 89-44506001-G012
Ø 6.0 Clamping ring, stainless steel G ½ A 12 25 18 Stainless steel 89-46406001-G012
Ø 6.0 Clamping ring, stainless steel G ½ A 12 25 18 zinc-coated 89-44406001-G012
Ø 8.0 Clamping ring, Teflon G ½ A 12 30 18 Stainless steel 89-46508001-G012
Ø 8.0 Clamping ring, Teflon G ½ A 12 30 18 zinc-coated 89-44508001-G012
Ø 8.0 Clamping ring, stainless steel G ½ A 12 30 18 Stainless steel 89-46408001-G012
Ø 8.0 Clamping ring, stainless steel G ½ A 12 30 18 zinc-coated 89-44408001-G012
Ø 9.0 Clamping ring, Teflon G ½ A 12 30 18 Stainless steel 89-46509001-G012
Ø 10.0 Clamping ring, Teflon G ½ A 12 30 18 Stainless steel 89-46510001-G012
Ø 10.0 Clamping ring, Teflon G ½ A 12 30 18 zinc-coated 89-44510001-G012
Ø 10.0 Clamping ring, stainless steel G ½ A 12 30 18 Stainless steel 89-46410001-G012
Ø 12.0 Clamping ring, Teflon G ½ A 12 30 18 Stainless steel 89-46512001-G012
Ø 12.0 Clamping ring, stainless steel G ½ A 12 30 18 Stainless steel 89-46412001-G012

Further information on request. Dimensions may deviate from those indicated.

Edition english Product group 99-EZT

002 Page 21
Temperature transmitter Günther GmbH · Temperaturmesstechnik

Günther PT
Günther Art. no. : 88-01900002-0000
- Temperature transmitter, PC-programable
- Application: RTD (Pt100)
- 2-wire 4-20 mA
- Fault reaction: NAMUR NE 43
- Mounting: head form B, DIN 43729

Günther PCP
Günther Art. no. : 88-01900011-0000
- Temperature transmitter, PC-programmable
- Application: RTD, TC, Ohm, mV
- 2-wire 4-20mA, galvanic isolation
- Fault reaction: NAMUR NE 43
- Mounting: head form B, DIN 43729

Günther PCP-HART
Günther Art. no.: 88-01900012-0000
- Temperature transmitter, Protocol HART®
- Application: RTD, TC, Ohm, mV
- 2-wire 4-20mA, SIL2, galvanic isolation
- Fault reaction: NAMUR NE 43
- Mounting: head form B, DIN 43729

General

The task of transmitters is the transformation of the sensor signal into a stable and standardized signal. In the past, transmitters
were built using analog technology. In the meantime digital technology has gained acceptance, however, because it offers better
measurement accuracy at simultaneously higher flexibility, improve safety and safe costs. In addition, the measurement accuracy
in modern transmitters can be improved by use ‚sensor-transmittermatching‘. The complete measurement point can be calibrated
in a loop (Sensor and transmitter together).
On the one hand, the standardized output signal in the process measurement is a 4...20 mA signal, but also the internationally
standardized field bus HART®. The HART® protocol serves mainly for a more convenient operation in combination with the 4...20 mA
analog measured signal.

Edition english Product group 99-EZT

002 Page 22