WHO/PQT: medicines Guidance Document
017 January 2016
QUALITY INFORMATION SUMMARY (QIS)
FOREWORD
The QIS template should be completed to provide a condensed summary of the key quality information for
product dossiers (PDs) containing APIs of synthetic or semi-synthetic origin and their corresponding products that
are filed with the Prequalification Programme.
The QIS constitutes part of the Prequalification PD. The QIS provides an accurate record of technical data in the
PD at the time of prequalification and thereafter serves as an official reference document during the course of
GMP inspections, variation assessments and requalification assessments as performed by WHO. The QIS is a
condensed version of the Quality Overall Summary – Product Dossier (QOS-PD) and represents the final, agreed
upon key information from the PD review (inter alia identification of the manufacturer(s), API/FPP specifications,
stability conclusions and relevant commitments).
The QIS template is structured to permit the rapid assembly of the QIS by copying requisite information from the
corresponding portions of the QOS-PD filed with the original PD. It is acknowledged that the numbering of the
sections may not be entirely sequential. Those sections not considered necessary to be included in the QIS have
been removed (e.g. 2.3.S.5 Reference Standards or Materials) and the remaining sections have retained their
numbering to be consistent with the original PD.
For original PDs, the QIS should be provided in Word format at the time of PD submission. The QIS should be
revised and submitted with the change history (see table at the end of the template) each time additional data is
provided during the assessment process. If no revision is necessary due to no change in the information, a
statement should be made to this effect in the covering letter. For variations and requalification dossiers, the QIS
should be completed in its entirety (regardless of the proposed change), it should include information on all
strengths, with any changes highlighted and it should be provided at the time of filing.
When completing the QIS template, this covering foreword should be deleted.
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
1
WHO/PQT: medicines Guidance Document
017 January 2016
QUALITY INFORMATION SUMMARY (QIS)
INTRODUCTION
(a) Summary of product information:
Non-proprietary name(s) of the finished
pharmaceutical product(s) (FPP)
Proprietary name(s) of the finished
pharmaceutical product(s) (FPP)
International non-proprietary name(s) of the
active pharmaceutical ingredient(s) (API(s)),
including form (salt, hydrate, polymorph)
Applicant name and address
Dosage form
Reference Number(s)
Strength(s)
Route of administration
Proposed indication(s)
Title:
Primary contact person responsible for this
First name:
application1
Family Name:
Contact person's job title
Contact person's postal address
Unit
Building/PO Box number
Road/Street
Plant/Zone
Village/suburb
Town/City
District and Mandal
Province/State
Postal code
Country
Contact person's email address
Contact person's phone number
(b) Administrative Summary:
Applicant’s date of preparation or revision of the
QIS
Internal version and/or date of acceptance (WHO use only)
Related dossiers (e.g. FPP(s) with the same API(s) submitted to the Prequalification Team: medicines
(PQTm) by the applicant):
1 Please note that the contact listed in this form will be the primary contact for email and mail communication for this specific application.
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
2
WHO/PQT: medicines Guidance Document
017 January 2016
Reference API, strength, dosage form API manufacturer
Prequalified
number (eg. Abacavir (as sulphate) 300 (including address if same
(Y/N)
(e.g. HA998) mg tablets) supplier as current dossier)
2.3.S DRUG SUBSTANCE (or ACTIVE PHARMACEUTICAL INGREDIENT (API)) (NAME,
MANUFACTURER)
Indicate which option applies for the submission of API information: <check one only>
Name of API:
Name of API manufacturer:
□ Confirmation of API prequalification document
□ Certificate of suitability to the European Pharmacopoeia (CEP)
Active pharmaceutical ingredient master file (APIMF) procedure:
APIMF number assigned by WHO (if known): _______ ; version number(s) including amendments (and/or
□
date(s)) of the open part: _______ ; version number(s) including amendments (and/or date(s)) of the
restricted part: : _______.
Full details in the PD
□
Document version number/identifier of current module 3.2.S: _______________
2.3.S.2 Manufacture (name, manufacturer)
2.3.S.2.1 Manufacturer(s) (name, manufacturer)
(a) Name, address and responsibility (e.g. fabrication, packaging, labelling, testing, storage) of each
manufacturer, including contractors and each proposed production site or facility involved in these
activities:
API-PQ number
Name and address Letter of access
Responsibility /APIMF/CEP number
(including block(s)/unit(s)) provided?
(if applicable)
2.3.S.2.3 Control of Materials (name, manufacturer) – for API option 4 only
(a) Name of starting material:
(b) Name and manufacturing site address of starting material manufacturer(s):
2.3.S.4 Control of the API (name, manufacturer)
2.3.S.4.1 Specification (name, manufacturer)
(a) API specifications of the FPP manufacturer:
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
3
WHO/PQT: medicines Guidance Document
017 January 2016
Standard (e.g. Ph.Int., Ph.Eur., BP, USP, in-house)
Specification reference number and version
Analytical procedure
Test Acceptance criteria
(Type/Source/Version)
Description
Identification
Impurities
Assay
etc.
2.3.S.6 Container Closure System (name, manufacturer)
(a) Description of the container closure system(s) for the storage and shipment of the API:
2.3.S.7 Stability (name, manufacturer)
2.3.S.7.1 Stability Summary and Conclusions (name, manufacturer)
(c) Proposed storage conditions and re-test period (or shelf-life, as appropriate):
Container closure system Storage statement Re-test period*
* indicate if a shelf-life is proposed in lieu of a re-test period (e.g. in the case of labile APIs)
2.3.P DRUG PRODUCT (or FINISHED PHARMACEUTICAL PRODUCT (FPP))
2.3.P.1 Description and Composition of the FPP
(a) Description of the FPP (in signed specifications):
(b) Composition of the FPP:
(i) Composition, i.e. list of all components of the FPP and their amounts on a per unit
basis and percentage basis (including individual components of mixtures prepared in-
house (e.g. coatings) and overages, if any):
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
4
WHO/PQT: medicines Guidance Document
017 January 2016
Component and quality Function Strength (label claim)
standard (and grade, if
applicable)
Quant. % Quant. % Quantity %
per unit per unit per unit
or per mL or per mL or per mL
<complete with appropriate titles e.g. Core tablet (Layer 1, Layer 2, etc. as applicable), Contents of capsule,
Powder for injection>
Subtotal 1
<complete with appropriate title e.g. Film-coating >
Subtotal 2
Total
(ii) Composition of all components purchased as mixtures (e.g. colourants, coatings,
capsule shells, imprinting inks):
(c) Description of accompanying reconstitution diluent(s), if applicable:
2.3.P.2.2.1 Formulation Development
(b) Information on primary (submission, registration, exhibit) batches including comparative
bioavailability or biowaiver, stability, commercial:
(i) Summary of batch numbers:
Batch number(s) of the FPPs used in
<e.g. bioequivalence batch A12345> <e.g. biowaiver
Bioequivalence or biowaiver
batch X12345>
For proportional strength biowaiver: the
bioequivalence batch of the reference strength
Dissolution profile studies
Stability studies (primary batches)
‹packaging configuration I›
‹ packaging configuration II›
‹Add/delete as many rows as necessary›
Stability studies (production batches)
‹ packaging configuration I›
‹ packaging configuration II›
(Add/delete as many rows as necessary)
Validation studies (primary batches)
‹ packaging configuration I›
‹ packaging configuration II›
(Add/delete as many rows as necessary)
Validation studies (at least the first three
consecutive production batches)
or code(s)/version(s) for process validation
protocol(s)
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
5
WHO/PQT: medicines Guidance Document
017 January 2016
Summary of formulations and discussion of any differences:
Component and Relevant batches
quality standard
Comparative Stability Process validation Commercial
(e.g. NF, BP,
bioavailability or (2.3.P.1)
Ph.Eur, in-house)
biowaiver
<Batch nos. and sizes> <Batch nos. and <Batch nos. and <Batch nos. and
sizes> sizes> sizes>
Theor. % Theor. % Theor. % Theor. %
quantity per quantity quantity quantity
batch per per per
batch batch batch
<complete with appropriate titles e.g. Core tablet (Layer 1, Layer 2, etc. as applicable), Contents of capsule, Powder
for injection>
Subtotal 1
<complete with appropriate title e.g. Film-coating >
Subtotal 2
Total
2.3.P.3 Manufacture
2.3.P.3.1 Manufacturer(s)
(a) Name, address and responsibility (e.g. fabrication, packaging, labelling, testing) of each
manufacturer, including contractors and each proposed production site or facility involved in
manufacturing and testing:
Name and address
Responsibility
(include block(s)/unit(s))
2.3.P.3.2 Batch Formula
Largest intended commercial batch size:
Other intended commercial batch sizes:
<information on all intended commercial batch sizes should be in the QIS>
(a) List of all components of the FPP to be used in the manufacturing process and their
amounts on a per batch basis (including components of mixtures prepared in-house (e.g.
coatings) and overages, if any):
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
6
WHO/PQT: medicines Guidance Document
017 January 2016
Strength (label claim)
Master production document
reference number and/or version
Proposed commercial batch size(s) (e.g. number
of dosage units)
Component and quality standard Quantity per batch Quantity per batch Quantity per batch
(and grade, if applicable) (e.g. kg/batch) (e.g. kg/batch) (e.g. kg/batch)
<complete with appropriate titles e.g. Core tablet (Layer 1, Layer 2, etc. as applicable), Contents of capsule, Powder for
injection>
Subtotal 1
<complete with appropriate title e.g. Film-coating >
Subtotal 2
Total
2.3.P.3.3 Description of Manufacturing Process and Process Controls
(a) Flow diagram of the manufacturing process:
(b) Narrative description of the manufacturing process, including equipment type and
working capacity, process parameters:
2.3.P.3.4 Controls of Critical Steps and Intermediates
(a) Summary of controls performed at the critical steps of the manufacturing process and on
isolated intermediates:
Step
Controls (parameters/limits/frequency of testing)
(e.g. granulation, compression, coating)
Proposed/validated holding periods for intermediates (including bulk product):
2.3.P.3.5 Process Validation and/or Evaluation
(a) Summary of the process validation and/or evaluation studies conducted and/or a summary
of the proposed validation protocol for the critical steps or critical assays used in the
manufacturing process (e.g. protocol number, parameters, results):
Document code(s) for the process validation protocol(s) and/or report(s) (including reference
number/version/date):
2.3.P.5 Control of FPP
2.3.P.5.1 Specification(s)
(a) Specification(s) for the FPP:
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
7
WHO/PQT: medicines Guidance Document
017 January 2016
Standard (e.g. Ph.Int., BP, USP, in-house)
Specification reference number and version
Acceptance criteria Acceptance criteria Analytical procedure
Test
(release) (shelf-life) (type/source/version)
Description
Identification
Impurities
Assay
etc.
2.3.P.7 Container Closure System
(a) Description of the container closure systems, including unit count or fill size, container
size or volume:
Description
Unit count or fill size Container size
(including materials of Strength
(e.g. 60s, 100s etc.) (e.g. 5 ml, 100 ml etc.)
construction)
2.3.P.8 Stability
2.3.P.8.1 Stability Summary and Conclusions
(c) Proposed storage statement and shelf-life (and in-use storage conditions and in-use
period, if applicable):
Container closure system Storage statement Shelf-life
2.3.P.8.2 Post-approval Stability Protocol and Stability Commitment
(a) Stability protocol for Primary stability batches (e.g. storage conditions (including
tolerances), batch numbers and batch sizes, tests and acceptance criteria, testing
frequency, container closure system(s)):
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
8
WHO/PQT: medicines Guidance Document
017 January 2016
Parameter Details
Storage condition(s) (◦C, % RH)
Batch number(s) / batch size(s) <primary batches>
Tests and acceptance criteria Description
Moisture
Impurities
Assay
etc.
Testing frequency
Container closure system(s)
(b) Stability protocol for Commitment batches (e.g. storage conditions (including tolerances),
batch numbers (if known) and batch sizes, tests and acceptance criteria, testing
frequency, container closure system(s)):
Parameter Details
Storage condition(s) (◦C, % RH)
Batch number(s) / batch size(s) <not less than three production batches in each container closure
system>
Tests and acceptance criteria Description
Moisture
Impurities
Assay
etc.
Testing frequency
Container closure system(s)
(c) Stability protocol for Ongoing Batches (e.g. storage conditions (including tolerances),
number of batches per strength and batch sizes, tests and acceptance criteria, testing
frequency, container closure system(s)):
Parameter Details
Storage condition(s) (◦C, % RH)
Batch size(s), annual allocation <at least one production batch per year (unless none is produced that
year) in each container closure system >
Tests and acceptance criteria Description
Moisture
Impurities
Assay
etc.
Testing frequency
Container closure system(s)
2.3.P.8.3 Stability Data
(c) Bracketing and matrixing design for commitment and/or continuing (i.e. ongoing)
batches, if applicable:
WRITTEN COMMITMENTS OF THE MANUFACTURER – FOR WHO USE
Important note: The product information is an essential part of the medicinal product. The SmPC and PIL
published with the WHOPAR have been quality assured by WHO experts and reflect the situation at the time of
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
9
WHO/PQT: medicines Guidance Document
017 January 2016
publication of the WHOPAR. These texts, i.e. the SmPC and the PIL are prequalified and should be adhered to.
Generally, a deviation from the prequalified product information (especially as to contents) means the product can
no longer be considered to be prequalified.
API
If applicable (primary stability study commitment):
The Applicant (or API manufacturer) provided a written commitment (dated day month year) to continue long-term
testing of <INN of API> for a period of time sufficient to cover the whole provisional re-test period (period ending
month/year) and to report any significant changes or out-of-specification results immediately to WHO for the
following batches :
<Batch numbers, manufacturing dates, batch size, primary packing materials>
If applicable (commitment stability studies):
Since stability data on three production scale batches were not provided with the application, the applicant
provided a written commitment (dated day month year) that the remaining number of production scale batches will
be put on long-term stability testing. Out-of-specification results, significant changes or significant atypical trends
will be investigated. Any confirmed significant change or out-of-specification result will be reported immediately to
WHO. The approved stability protocol will be used for commitment batches.
API option 2 – CEP
The Applicant provided a written commitment (dated day month year) to inform WHO in the event that the CEP is
revised or withdrawn, and that revisions to the CEP will be handled as per variation 5 (Annex 3, TRS 981). Note
that revisions or withdrawal will require additional consideration of the API data requirements to support the
dossier.
API option 3 – full details in the PD (ongoing stability study commitment)
The Applicant provided a written commitment (dated day month year) regarding ongoing stability studies. Unless
otherwise justified, at least one batch per year of the product will be included in the stability programme (unless
none is produced during that year). The stability protocol will be that which was approved for primary batches.
Out-of-specification results, significant changes or significant atypical trends will be investigated. Any confirmed
significant change or out-of-specification result will be reported immediately to WHO. The possible impact on
batches on the market will be considered in consultation with WHO inspectors.
FPP
If applicable (primary stability study commitment):
The Applicant provided a written commitment (dated day month year) to continue long-term testing of < FPP
reference number, trade name (INN of API), strength, pharmaceutical form> for a period of time sufficient to cover
the whole provisional shelf-life (period ending month/year) and to report any out-of-specification results or
significant changes immediately to WHO for the following batches :
<Batch numbers, manufacturing dates, batch size, primary packing materials >
If applicable (commitment stability studies):
Since stability data on three production scale batches was not provided with the application, the Applicant
provided a written commitment (dated day month year) to put the remaining number <e.g. additional two>
production scale batches of < FPP reference number, trade name (INN of API), strength, pharmaceutical form,
primary packing material> on long-term stability testing. Out-of-specification results, significant changes or
significant atypical trends will be investigated. Any confirmed significant change or out-of-specification result will
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
10
WHO/PQT: medicines Guidance Document
017 January 2016
be reported immediately to WHO. The approved stability protocol will be used for commitment batches.
If applicable (when the proposed largest commercial batch size is 200 000 units (x units) or less)
The Applicant provided a written commitment (dated day month year) to place the first three batches of any
production size larger than x units on stability. The stability protocol will be that which was approved for primary
batches. Out-of-specification results, significant changes or significant atypical trends will be investigated. Any
confirmed significant change or out-of-specification result will be reported immediately to WHO.
Ongoing stability study commitment
The Applicant provided a written commitment (dated day month year) regarding ongoing stability studies. Unless
otherwise justified, at least one batch per year of the product manufactured in every primary packaging type will
be included in the stability programme (unless none is produced during that year). The stability protocol will be
that which was approved for primary batches. Out-of-specification results, significant changes or significant
atypical trends will be investigated. Any confirmed significant change or out-of-specification result will be reported
immediately to WHO. The possible impact on batches on the market will be considered in consultation with WHO
inspectors.
If applicable (validation of production batches)
Validation data on production scale batches of not less than three consecutive batches of <FPP reference
number, trade name (INN of API), strength, pharmaceutical form, primary packing material> was not provided with
the application. Therefore, the Applicant provided a written commitment (dated day month year) that three
consecutive production batches would be prospectively validated and a validation report —in accordance with the
details of the validation protocol provided in the dossier— would be made available as soon as possible for
evaluation by assessors or for verification by the WHO inspection team.
Change History
Date of preparation of original QIS:
Date of revised Section (e.g.
Revision
version S.2.1)
QIS (2020-06-01)
<Dossier Reference Number(s) e.g. HA999>
11
