IN-LINE MIXED FLOW DUCT FANS

TD-MIXVENT Series

Range of low profile in-line mixed

flow duct fans manufactured in tough
reinforced plastic (from 160 to 800
models) or with metal casing steel
finished in a tough epoxy-polyester paint
coating (from 1000 to 6000 models).
The unique design of the support
bracket allows the motor and impeller
assembly to be fitted or removed without
dismantling the adjacent ducting.

Motors
Models 160-2000: Class B, with ball
bearings and safety thermal overload
protection. IP44.
Direct 2-speed connection and also
suitable for voltage speed control.
Electrical supply:
Single phase 230V-50/60Hz.

Models 4000 and 6000: Class F, with ball

bearings and safety thermal overload
protection. IP54.
Suitable for voltage speed control.
Electrical supply:
Single phase 230V-50/60Hz.

Additional information
Three phase models adjustable by
inverter control.

TD-MIXVENT-T models
TD-MIXVENT versions fitted with a
run-on-timer adjustable within 1 and 30
minutes and onespeed motor not suitable
for speed control.

The MIXVENT-TD fans offer the ideal in-line duct fan solution for a wide range of
general residential or commercial ventilation application into.

780 In-Line duct fans TD-MIXVENT www.solerpalau.com

IN-LINE MIXED FLOW DUCT FANS
TD-MIXVENT Series

Low profile

Classic In-line Ventilation Mixed flow

centrifugal centrifugal casing MIXVENT

The low profile of the MIXVENT-TD fans makes them the most effective solution for
installations where the space of installation is limited such as false ceilings.

Easy to mount Easy maintenance

Fix the support bracket. Place the impeller and

motor assembly.

The unique design of the support bracket allows the motor and
impeller assembly to be fitted or removed without dismantling the
adjacent ducting.

Carry out the wiring Connect the ducts.

connections.

Flexible mounting position MODELS TD-MIXVENT-T MODEL 160

Can be mounted at any place of the air duct. Models MIXVENT-TD-T (from Model TD-160/100N SILENT
160 to 800 models) are fitted with offer very low noise level,
an adjustable timer between 1 with a motor mounted on
and 30 minutes and are supplied silent-elastic-blocks which
with a one-speed motor not absorb the vibrations.
suitable for speed control.

www.solerpalau.com In-Line duct fans TD-MIXVENT 781

IN-LINE MIXED FLOW DUCT FANS
TD-MIXVENT Series

Design characteristics
160 250 350 500 800 800N 1000 1300 2000 4000 6000

Polypropylene casing • • • • • •
Steel casing • • • • • •
ABS impeller • • • • • •
Aluminium impeller • • • •(1) •(1)
Protection class II II II II II II I I I I I

Thermal protection by fuse • • •

Manual resetting thermal protector (PTC) • • • • • • • •
Ball bearings greased for life • • • • • • • • • • •
1 speed controllable motor • •
2 speed controllable (2) motor • • • • • • • • •
(1) Models from one piece die cast aluminium impeller.
(2) Models with Run-On-Timer fitted (TD-MIXVENT-T) are not controllable.

Technical characteristics Speed

TD-MIXVENT Speed Maximum Maximum Airflow Maximum Sound Ø Weight Optional speed Wiring
(rpm) absorbed absorbed at free operating pressure Duct (kg) controller diagram**
power current discharge temperature level* (mm) (nº)
(W) (A) (m3/h) (°C) (dB(A))
2500 20 0,16 180 24
TD-160/100 N SILENT -20/+40 100 1,4 RMB-1,5 / REB-1 9, 10
2200 12 0,10 140 21
2200 24 0,11 240 31
TD-250/100 -20/+40 100 2,0 RMB-1,5 / REB-1 9, 10
1850 18 0,10 180 26
2250 30 0,13 360 33
TD-350/125 -20/+40 125 2,0 RMB-1,5 / REB-1 9, 10
1900 22 0,10 280 28
2500 50 0,22 580 33
TD-500/150 -20/+60 150 2,7 RMB-1,5 / REB-1 9, 10
1950 44 0,19 430 29
2500 50 0,22 580 33
TD-500/160 -20/+60 160 2,7 RMB-1,5 / REB-1 9, 10
1950 44 0,19 430 29
2780 95 0,45 880 37
TD-800/200N -20/+60 200 4,9 RMB-1,5 / REB-1 9, 10
2480 90 0,43 700 33
2500 120 0,50 1.100 39
TD-800/200 -20/+60 200 4,9 RMB-1,5 / REB-1 9, 10
2000 100 0,45 800 33
2800 125 0,50 1.010 40
TD-1000/250 -40/+60 250 9,4 RMB-1,5 / REB-1 12, 13
2610 85 0,35 900 38
2520 180 0,80 1.300 43
TD-1300/250 -40/+60 250 9,4 RMB-1,5 / REB-1 12, 13
2000 140 0,60 1.100 39
2700 255 1,20 2.000 47
TD-2000/315 -40/+60 315 14,0 RMB-1,5 / REB-2,5 12, 13
2000 160 0,80 1.550 42
TD-4000/355 1400 345 1,53 3.800 -40/+40 44 355 19,0 RMB-3,5 / REB-2,5 15, 16
TD-6000/400 1400 665 2,97 5.500 -40/+40 44 400 26,0 RMB-8 / REB-5 17, 18
THREE PHASE
TD-4000/355 TRIF 1375 345 0,75 3.800 -40/+40 44 355 19,0 RMT-1,5 / VFTM TRI 0,37 21
TD-6000/400 TRIF 1375 650 2,10 5.500 -40/+40 44 400 26,0 RMT-2,5 / VFTM TRI 0,75 21
* Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet.
** See section of Wiring Diagrams.

TD-MIXVENT-T Speed Maximum Maximum Airflow Maximum Sound Ø Weight

(models TD-MIXVENT with (rpm) power absorbed at free operating pressure Duct (kg)
run-on timer) absorbed current discharge temperature level* (mm)
(W) (A) (m3/h) (°C) (dB(A))

TD-160/100 NT SILENT 2500 20 0,16 180 -20/+40 24 100 1,4

TD-250/100 T 2200 24 0,11 240 -20/+40 31 100 2,0
TD-350/125 T 2250 30 0,13 360 -20/+40 33 125 2,0
TD-500/150 T 2500 50 0,22 580 -20/+60 33 150 2,7
TD-500/160 T 2500 50 0,22 580 -20/+60 33 160 2,7
TD-800/200 T 2500 120 0,50 1.100 -20/+60 39 200 4,9
* Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet.

782 In-Line duct fans TD-MIXVENT www.solerpalau.com

IN-LINE MIXED FLOW DUCT FANS
TD-MIXVENT Series

Dimensions (mm)
TD-160/100 N SILENT TD -250 to TD-2000 TD -4000 / TD-6000

C
B
ØK

D
ØE
ØF
A

J
G G
H
I

Model X A ØB C ØD E F G H
TD-250/100 188 303 176 115 97 100 90 80 60
TD-350/125 188 258 176 115 123 100 90 80 60
TD-500/150 212 295 200 127 147 112 130 80 60
TD-500/160 212 295 200 127 157 112 130 80 60
TD-800/200N 232,5 302 217 141 198 124 140 100 94
TD-800/200 232,5 302 217 141 198 124 140 100 94
TD-1000/250 291 386 272 192 248 155 168 145 140
TD-1300/250 291 386 272 192 248 155 168 145 140
TD-2000/315 356 450 336 224 312 188 210 182 178

Model A B C D ØE ØF G H I J ØK
TD-4000/355 377 238 451 224 426 354 150 368 474 340 8.5
TD-6000/400 407 249 249 267 487 399 160 425 547 370 8.5

Acoustic power spectrum in dB(A), for every frequency band, at the inlet and radiated, at high speed
AT INLET 63 125 250 500 1000 2000 4000 8000

TD-160/100 N SILENT 24 32 39 46 52 49 40 21

TD-250/100 28 47 46 53 52 47 39 33
TD-350/125 35 47 46 53 54 50 41 33
TD-500/150 32 35 55 57 59 62 56 48
TD-500/160 32 35 55 57 59 62 56 48
TD-800/200N 37 42 62 64 66 64 60 52
TD-800/200 37 47 61 63 68 67 64 54
TD-1000/250 35 45 58 66 72 69 62 54
TD-1300/250 37 52 64 67 75 73 66 61
TD-2000/315 41 57 66 71 77 74 67 62
TD-4000/355 40 49 61 66 73 70 66 57

TD-6000/400 43 56 67 72 76 74 69 60

RADIATED 63 125 250 500 1000 2000 4000 8000

TD-160/100 N SILENT 24 24 37 34 36 41 32 21
TD-250/100 27 46 45 44 43 43 32 25
TD-350/125 33 46 46 47 47 45 33 24
TD-500/150 25 32 43 39 44 53 42 29
TD-500/160 25 32 43 39 44 53 42 29
TD-800/200N 26 32 48 47 52 53 44 31
TD-800/200 29 36 47 46 54 57 48 33
TD-1000/250 23 34 44 46 58 57 46 43
TD-1300/250 22 36 39 47 60 59 52 47
TD-2000/315 29 41 52 55 64 63 57 53
TD-4000/355 31 49 55 55 63 57 51 40
TD-6000/400 30 53 59 55 61 55 54 45

www.solerpalau.com In-Line duct fans TD-MIXVENT 783

IN-LINE MIXED FLOW DUCT FANS
TD-MIXVENT Series

Performance curves
– qv: Airflow in m3/h and m3/s. HS : High speed
– psf: Static pressure in mmWG and Pa. LS: Low speed
– Dry air at 20ºC and 760 mmHg.
– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.

psf psf
(Pa) (mmWG) TD-160/100 N SILENT
120 12

100 10

80 8

60 6
HS

40 4 LS

20 2

0 0
0 20 40 60 80 100 120 140 160 180 qv [m3/h]

0.00 0.01 0.02 0.03 0.04 0.05 qv [m3/s]

psf psf psf psf

(Pa) (mmWG) TD-250/100 (Pa) (mmWG) TD-350/125
160 16 160 16

140 14 140 14

120 12 120 12

100 10 100 10
HS HS
80 8 80 8
LS
60 6 60 6
LS
40 4 40 4

20 2 20 2

0 0 0 0
0 40 80 120 160 200 240 qv [m3/h] 0 50 100 150 200 250 300 350 qv [m3/h]

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 qv [m3/s] 0.00 0.02 0.04 0.06 0.08 0.10 qv [m3/s]

psf psf TD-500/150 psf psf

(Pa) (mmWG) TD-500/160 (Pa) (mmWG) TD-800/200 N
300 30 300
30

250 25 250 25

200 20 200 20
HS
HS
150 15 150 15

LS
LS
100 10 100 10

50 5 50 5

0 0 0 0
0 100 200 300 400 500 600 qv [m3/h] 0 200 400 600 800 qv [m3/h]

0.00 0.04 0.08 0.12 0.16 qv [m /s]

3
0.00 0.04 0.08 0.12 0.16 0.20 0.24 qv [m3/s]

784 In-Line duct fans TD-MIXVENT www.solerpalau.com

IN-LINE MIXED FLOW DUCT FANS
TD-MIXVENT Series

Performance curves
– qv: Airflow in m3/h and m3/s. HS : High speed
– psf: Static pressure in mmWG and Pa. LS: Low speed
– Dry air at 20ºC and 760 mmHg.
– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.

psf psf psf psf

(Pa) (mmWG) TD-800/200 (Pa) (mmWG) TD-1000/250
400 600
40 60

350 35
500 50
300 30
400 40
250 25
HS
200 20 300 30
LS HS
150 15
200 20
LS
100 10
100 10
50 5

0 0 0 0
0 200 400 600 800 1000 qv [m3/h] 0 200 400 600 800 1000 qv [m3/h]
0.00 0.05 0.10 0.15 0.20 0.25 0.30 qv [m3/s] 0.00 0.05 0.10 0.15 0.20 0.25 0.30 qv [m3/s]

psf psf psf psf

(Pa) (mmWG) TD-1300/250 (Pa) (mmWG) TD-2000/315
600 60 900 90
800 80
500 50
700 70
400 40 600 60

500 50
300 30
400 40
HS HS
200 20 300 30
LS
200 20 LS
100 10
100 10

0 0 0 0
0 200 400 600 800 1000 1200 1400 qv [m3/h] 0 400 800 1200 1600 2000 qv [m3/h]

0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 qv [m /s]
3 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 qv [m3/s]

psf psf psf psf

(Pa) (mmWG) (Pa) (mmWG)
TD-4000/355 TD-6000/400
300 30 350 35

250 30
25
23
230 0V
V 250 25
200 20 175 17
V 5V
200 20
150 15 15
5V 150 15
15 5V
100 10 130
130 100 10 V
V
105
50 5 V
105 50 5
V

0 0 0 0
0 500 1000 1500 2000 2500 3000 3500 qv [m3/h] 0 1000 2000 3000 4000 5000 qv [m3/h]

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 qv [m3/s] 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 qv [m3/s]

www.solerpalau.com In-Line duct fans TD-MIXVENT 785

IN-LINE MIXED FLOW DUCT FANS
KITS TD-MIXVENT

KITS TD-MIXVENT
The TD ventilation kits enable the simple and
fast installation of a complete ventilation
system. The kits provide efficient extraction for
bathrooms, toilets, washrooms and any other
applications that require the removal of bad
odours, stuffy and humid air.

KIT TD-160/100 N SILENT includes:

1 TD-160/100 N SILENT fan
+ 4 m of flexible aluminium ducting GSA
+ 1 interior circular air valve BOR-100
+ 1 exterior mounted grille GR-100
+ 1 adhesive duct tape BA

KIT TD-250/100 includes:

1 TD-250/100 fan
+ 4 m of flexible aluminium ducting GSA
+ 1 interior circular air valve BOR-100
+ 1 exterior mounted grille GR-100
+ 1 adhesive duct tape BA

Installation and mounting KIT TD-160/100 NT SILENT includes:

1 TD-160/100 NT SILENT fan
+ 4 m of flexible aluminium ducting GSA
+ 1 interior circular air valve BOR-100
+ 1 exterior mounted grille GR-100
+ 1 adhesive duct tape BA

KIT TD-250/100T includes:

1 TD-250/100 T fan
+ 4 m of flexible aluminium ducting GSA
+ 1 interior circular air valve BOR-100
+ 1 exterior mounted grille GR-100
+ 1 adhesive duct tape BA

The TD-T extractors are fitted with an

adjustable Run-On-Timer between 1 and
30 minutes, keeping the fan in operation for
the selected period of time after being
switched off.

Accessories included in kit

GSA-100 GR-100 BOR-100
100 mm diameter of Exterior mounted Interior circular
flexible aluminium grille. air valve.
ducting.

BA-50
Adhesive aluminium
duct tape (10 m).

786 In-Line duct fans KITS TD-MIXVENT www.solerpalau.com