Scribd
Upload
81 views1 page

TDS Lube New

The document describes a lubricant called Lube that reduces torque and drag in water-based fluids. Lube is an amber liquid with a mild odor that is miscible in water and stable at high temperatures. It can be added to water-based drilling systems at a concentration of 0.5% to 1.5% by volume to improve parameters like torque and drag.

Uploaded by

Baher Said
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views1 page

TDS Lube New

The document describes a lubricant called Lube that reduces torque and drag in water-based fluids. Lube is an amber liquid with a mild odor that is miscible in water and stable at high temperatures. It can be added to water-based drilling systems at a concentration of 0.5% to 1.5% by volume to improve parameters like torque and drag.

Uploaded by

Baher Said
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Lube
DESCRIPTION

Lube is an effective lubricant for reducing torque and drag in water-based fluids.

PHYSICAL PROPERTIES
Appearance Liquid
Colour Amber
Odor Mild
Specific Gravity 1.1
Flash Point 240°F (116°C)
Solubility Miscible in water

APPLICATION

Lube is an effective lubricant for reducing torque and drag in water-based fluids. Lube is stable at high
temperatures and also lubricates well at extreme pressure.
The normal concentration for Lube treatments is in the range 0.5% to 1.5% by volume. Higher
concentrations may be beneficial, provided there are improvements in torque, drag and other drilling
parameters.

TECHNICAL & ENGINEERING INFORMATION

Lube is a modified cellulose derivative. The product is environmentally friendly and supplies the
lubricating properties of oil in water-based fluids without using diesel oil or similar pollutants.
The alkalinity of Lube is pH 7.5, so it can be added to water-based systems without having an
adverse effect on mud parameters or other chemical additives.

PACKAGING AND STORAGE

Lube is supplied 55 gal (208 lt) steel drums. Contents valid for 2 years from manufacturing date on
the drum.

HSE

Lube may be an irritant on contact with skin and may be harmful if ingested. The following safety
wear, as recommended in the MSDS, should be used when mixing Lube:
- Standard PPE
- Chemical Splash Goggles or Face Shield

Tel: +20 (2) 33885696


Egyptian Company for Supplying Chemicals and Derivatives www.ecscd.com

Schlumberger-Private

You might also like