Scribd
Upload
130 views2 pages

Radiator Support (Assy) : Body Panel Replacement BP-8

The document provides instructions for installing replacement body panels and a radiator support. Key steps include temporarily installing new parts to check dimensions against a body diagram, inspecting the fit of surrounding parts before welding, applying polyurethane foam and sealer to welded areas, and applying undercoating and a top coat layer with anti-rust agent to welded sections. Fit should be inspected carefully as it affects the quality of the finished appearance.

Uploaded by

mohhizbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
130 views2 pages

Radiator Support (Assy) : Body Panel Replacement BP-8

The document provides instructions for installing replacement body panels and a radiator support. Key steps include temporarily installing new parts to check dimensions against a body diagram, inspecting the fit of surrounding parts before welding, applying polyurethane foam and sealer to welded areas, and applying undercoating and a top coat layer with anti-rust agent to welded sections. Fit should be inspected carefully as it affects the quality of the finished appearance.

Uploaded by

mohhizbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BP-8 BODY PANEL REPLACEMENT

RADIATOR SUPPORT (ASSY)


REPLACEMENT

F20979-A

REMOVAL

F20979
BODY PANEL REPLACEMENT BP-9

INSTALLATION
S Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension
diagram. (See the body dimension diagram)
S Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the
finish.
S After welding, apply the polyurethane foam to the corresponding parts.
S After welding, apply body sealer and under-coating to the corresponding parts.
S After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.

F20980

POINT
1 Inspect the fitting of the headlight and front fender, etc., before welding since affects the appearance of the
finish.

You might also like