DN-60499:B
ONYXWorks® NFN
Embedded Gateway-3
Network Systems
General
The NOTI•FIRE•NET™ Gateway is an intelligent gateway
interface for the ONYXWorks® fire monitoring workstation.
This gateway facilitates complete monitoring and control of a
NOTI•FIRE•NET™ network. In addition, it supports full panel
programming and network diagnostics.
The embedded gateway is a standalone version and is
equipped with IP capability thus enabling ONYX® Series users
to monitor multiple sites over an Ethernet network without the
need for remote workstations.
Features
• Enables ONYX® Series workstation to monitor alarm, pre-
alarm, trouble, disabled events, etc. for NFN fire alarm
control panels.
• ONYXWorks® supports up to 50 intelligent gateways.
NFN-GW-EM-3
• Compatible with standard and high speed
NOTI•FIRE•NET™ network.
Standards and Codes
• Adds acknowledge, silence, reset, enable/disable, and
activate/deactivate control capability to the workstation. The NOTI•FIRE•NET™ Gateway complies with the following
• Supports fire alarm control panel programming upload/ UL/ULC Standards and NFPA 72 Fire Alarm Systems
downloads and modifications. requirements:
• Embedded gateway allows remote IP connections and – UL 864
increases scalability of network. – UL 1076
• Supervised IP connections for remote workstations and – UL 2017
gateways. – ULC S559-04
• Multiple workstations can access the gateway at the same – ULC S527-99
time.
• Gateway redundancy for network survivability. Listings and Approvals
These listings and approvals apply to the modules specified in
Compatibility this document. In some cases, certain modules or applications
The NOTI•FIRE•NET™ Gateway is compatible with may not be listed by certain approval agencies, or listing may
ONYXWorks® and ONYX FirstVision and interfaces to be in process. Consult factory for latest listing status.
NOTI•FIRE•NET™ version 5.0 and higher, as well as a high
• UL / ULC: S5697
speed NOTI•FIRE•NET™ network for the following panels and
devices: • FM Approved
• ONYX Series • CSFM: 7300-1525:103
• AM2020/AFP1010 (version 5.0 SIB-NET) • MEA: 286-07-E
• AFP-200 (version 5.0 NAM) • FDNY: COA #6041
• AFP-300/AFP-400 (version 5.0 NAM)
Ordering Information
• BACnet Gateway
• NCA-2/NCA Network Control Annunciator NFN-GW-EM-3: NOTI•FIRE•NET™ Gateway, embedded.
Includes PC board, NUP to NUP cable (75577), USB Cable
• NOTI•FIRE•NET™Web Server (75665) and NFN Configuration.
Additional EMBEDDED VERSION Gateway required
Specifications components:
• Power input: 24 VDC • NCM for connection to NOTI•FIRE•NET™.
• Input current: 450 mA @ 24 VDC (without NCM). • HS-NCM for connection to high speed NOTI•FIRE•NET™.
• Operating temperature: 0°C to 49°C (32°F to 120°F). • IBM®-compatible PC with Windows® XP.
• Direct connection to NFS2-640, NFS-640, NFS-320, NFS2- • Standard Ethernet network cable with RJ45 to RJ45
3030, and NFS-3030 fire alarm control panels. NCM connectors.
required for connection to NOTI•FIRE•NET™, and HS-NCM
for connection to high-speed network. (See data sheets • ONYXWorks Workstation V3.12 or above .
DN-6861 and DN-60454.) • NFN Network Version 5.0 or above.
• Verifire Tools Version 5.71 or above.
DN-60499:B • 04/09/2010 — Page 1 of 2
Remote Monitoring
NFN-GW-EM-3
7060ap2a.wmf
or High Speed
NOTI•FIRE•NET™
High Speed
NOTI•FIRE•NET™
or
NION®, NOTIFIER®, ONYX® and ONYXWorks® are registered trademarks
and NOTI•FIRE•NET™, NOTIFIY-IP™, and ONYX FirstVision™ are
trademarks of Honeywell International Inc. Windows® is a registered
trademark of Microsoft Corporation.
©2010 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
Made in the U.S. A.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Page 2 of 2 — DN-60499:B • 04/09/2010
