SAUDI ARAMCO ID/PIEU-30-April-2019 - REV.2019.04.00 (Standards Cutoff - April 30,2019) Rev.2019.04.

00 30-Apr-19

SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER DATE APPROVED QR NUMBER

Cranes, Hoists, Elevators - Speciality Equipment and

SAIC-P-3424 29-Aug-19 ELECT
Accessories - Material Receiving
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.

A. Document Review

Schedule Q
Review documents of Material Receiving for the Cranes, Hoists or
A1 Att. IV
Elevators.
Sec. 3.3
Schedule Q
Identification procedure reviewed and implemented for the Cranes, Hoists
A2 Att. IV
or Elevators.
Sec. 4.2

Material identification shall be implemented for all materials, parts and

components, including partially fabricated assemblies. Cranes, Hoists or Schedule Q
A3 Elevators shall be identified by using tags, stamps, color coding, stencils Att. IV
or labels. The location and method of identification shall not affect the Sec. 4.2
function or quality of the material.

B. General Requirements

Documentation for traceability reviewed and implemented. Cranes, Hoists

Schedule Q
or Elevators shall be traceable from the manufacturer and supplier
B1 Att. IV
through delivery, storage, fabrication, erection, installation, repair,
Sec. 4.3
modification and use.

Schedule Q
Documented Control System shall be implemented for all Saudi Aramco
B2 Att. IV
supplied material and equipment.
Sec. 5

C. Material Inspection

QC Before Installation- Cranes, Hoists or Elevators shall conform to all Schedule Q

C1 applicable requirements, standards, and specifications prior to release to Att. IV
be used as part of work. Sec. 3.3
Schedule Q
Incoming Cranes, Hoists or Elevators shall be visually inspected for
C2 Att. IV
damage / defects occurred during transportation.
Sec. 3.3

Schedule G
C3 Cranes, Hoists or Elevators shall be new and unused.
Sec. 2.1

Cranes, Hoists or Elevators shall be in accordance with the Saudi

Schedule G
C4 Aramco-approved project-specific design drawings, diagrams, schedules,
Sec. 4.1
lists, databases, and associated design documents.

Check that the Contractor or it's Saudi Aramco approved third party
Schedule Q
inspector performed the quality activities at the supplier and sub-supplier
C5 Att. llI
locations as required by the inspection level assigned for the materials
Sec. 1.2
and equipment identified in SAER-1972 Inspection Requirements.

Cranes and Hoists shall meet NEC Article 610 and for safety code ANSI SAES-B-053
C6
B-30.2 (2005) Sec. 3.2

Saudi Aramco: Company General Use

 Elevators shall meet NEC Article 620 and for safety code ASME/ANSI SAES-B-053
C7
A17.1 (2007) Sec. 3.2

Motors rated less than 0.746 KW (1 HP) shall comply with NEMA MG 1,
or IEC 60034, and the following additional requirements:
(a) Motors for exposed outdoor installation shall be of the totally enclosed
type and rated in accordance with NEMA MG 1 or IEC 60034-1 for a 50°C
ambient and a Class B winding temperature rise.
(b) Motors for indoor installation shall be totally enclosed or of the drip
17-SAMSS-503
C8 proof guarded type.
Sec. 3.2
(c) The insulation system shall be Class F minimum.
(d) Enclosures and terminal housings shall be metallic.
(e) Single Phase Motors shall be provided with a built-in thermal
protective device.
(f) Fans shall be metallic or reinforced fiberglass, and shall be designed
for dual rotation.

Motors shall be fitted with replaceable shaft seals of the non-contacting

17-SAMSS-503
C9 while rotating type. Seals shall be fitted on both the drive end and non-
Sec. 4.5
drive end of the shaft.

(Exception) Motors supplied under this specification shall comply with the
following table:

17-SAMSS-503
C10 Motor Voltage Rating Motor HP Rating
≤ 460V ≤ 185kW (250 HP) Sec. 4.3
4kV 185kW (250 HP) to 370kW (500 HP)

Note: Dual voltage 230/460 V are only acceptable for motors up to 30 HP.

All equipment that operates in hazardous (classified) location shall SAES-B-053

C11
conform to Article 500 of NEC. [NFPA 70, NEC 610.3 (A)] Sec. 3.2

Cranes and Hoists:

Conductors shall be enclosed in raceways or be Type AC cable with SAES-B-053
C12
insulated grounding conductors, Type MC cable, or Type MI cable. [NFPA Sec. 3.2
70, NEC 610.11]

Conductors external to motors and controls shall be not smaller than 16 SAES-B-053
C13
AWG. [NFPA 70, NEC 610.14(C)] Sec. 3.2

Check that runway conductor disconnecting means is supplied between

the runway contact conductors and the power supply. Such disconnecting
SAES-B-053
C14 means shall consist of a motor-circuit switch, circuit breaker, or molded
Sec. 3.2
case switch.
[NFPA 70, NEC 610.31]

The runway supply conductors and main contact conductors of a crane or

SAES-B-053
C15 monorail shall be protected by an overcurrent device.
Sec. 3.2
[NFPA 70, NEC 610.41(A)]

Branch circuits shall be protected by Fuse or Circuit Breaker. Tap to brake

SAES-B-053
C16 coils do not require separate overcurrent protection.
Sec. 3.2
[NFPA 70, NEC 610.42(A & B)]

Each motor, motor controller, and branch-circuit conductor shall be SAES-B-053

C17
protected from overload. [NFPA 70, NEC 610.43(A)] Sec. 3.2

Each motor shall be provided with an individual controller. SAES-B-053

C18
[NFPA 70, NEC 610.51] Sec. 3.2

Conductors of control circuits shall be protected against overcurrent. SAES-B-053

C19
[NFPA 70, NEC 610.53] Sec. 3.2

A limit switch or other device shall be provided to prevent the load block
SAES-B-053
C20 from passing the safe upper limit of travel of all hoisting mechanisms.
Sec. 3.2
[NFPA 70, NEC 610.55]

Saudi Aramco: Company General Use

 Elevators:
The supply voltage shall not exceed 300 volts between conductors. [NFPA SAES-B-053
C21
70, NEC 620.3] Sec. 3.2

Branch circuits for heating and air-conditioning equipment located on the

SAES-B-053
C22 elevator car shall not have a circuit voltage in excess of 600 volts. [NFPA
Sec. 3.2
70, NEC 620.3(C)]

All conductors in raceways shall have flame-retardant insulation. SAES-B-053

C23
[NFPA 70, NEC 620.11(C)] Sec. 3.2

REMARKS:

REFERENCE DOCUMENTS:
1. Schedule G -- Material, Tools and Equipment (Pro Forma MP-ILK-LS Contract), Contract Specific
2. Schedule Q - Quality Requirements (Pro Forma Contract), Contract Specific
3. SAES-B-053 - Machine Safety Guarding, Elevators, Escalators, and Conveyors, 15 August 2017
4. 17-SAMSS-503 - Severe-Duty, Totally Enclosed, Squirrel Cage Induction Motors to 500 HP, 29 Ocotober 2018
3. NFPA 70 - National Electrical Code (NEC), 2014 Edition
6. ANSI B30.2 - Overhead and Gantry Cranes, 2005 Edition
7. ASME/ANSI A 17.1 - Safety Code for Elevators, 2007 Edition

NOTES:
1. Approved - Acceptable to the authority having jurisdiction (i.e., Saudi Aramco ID).
2. Identified - Recognizable as suitable for the specific application by a qualified testing laboratory (i.e., listing and/or labeling).

3. Listed - Equipment and materials included in a list published by an approved qualified organization concerned with evaluation of products or
services, that maintains periodic inspection of production of listed equipment or materials or periodic evaluation of services, and whose listing states
that the equipment, material, or services either meets appropriate designated standards or has been tested and found suitable for a specified purpose.

4. Labeled - Equipment or materials to which has been attached a label, symbol, or other identifying mark of an approved qualified organization
concerned with product evaluation, that maintains periodic inspection of production of labeled equipment or materials, and by whose labeling the
manufacturer indicates compliance with appropriate standards or performance in a specified manner.

Contractor / Third-Party Saudi Aramco

Construction Representative* PMT Representative
Work is Complete and Ready for Inspection: T&I Witnessed QC Record Reviewed Work Verified
Name, Initials and Date: Name, Initials and Date:

QC Inspector PID Representative

Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
Name, Initials and Date: Name, Initials and Date:

QC Supervisor Proponent and Others

Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
Name, Organization,
Name, Sign and Date:
Initials and Date:

*Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED

Saudi Aramco: Company General Use