LRT 8 Luminescence scanner

Dimensioned drawing
en 05-2014/06 50118345

0…500mm
1,5 kHz

10 - 30 V
DC
A2 LS

 Detection of luminescent objects and

markings
 Various filter options
 Various light spot sizes
 High switching frequency

A Transmitter and receiver

B Optical axis
C Operational control
D Indicator diodes
E Turning connector, 90° rot. angle
We reserve the right to make changes • DS_LRT8_en_50118345.fm

Electrical connection
IP 69K
IP 67

1x PNP or 1x NPN

IEC 60947... IEC 60947...

Accessories:
(available separately)
 M12 connectors (KD …)
 Ready-made cables (K-D …) 2 x PNP, antivalent

 Mounting systems
 Control guard
 Diaphragms

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

 LRT 8

Specifications Tables
Optical data
Typ. scanning range limit 1) see tables Scanning range limit
Typ. scanning range 2) see tables Typ. scanning range
Sensor
Light spot diameter see diagram limit
Light source LED LRT 8/24.00-50-… 0 … 100mm
Wavelength 370nm (UV light) or 470nm (blue light) LRT 8/24.04-50-… 0 … 100mm
Average life 3) 50,000h
LRT 8/24.16-80-… 0 … 120mm
Timing LRT 8/24.04-100-… 0 … 300mm
Switching frequency 1500Hz
Response time 0.33ms LRT 8/44.04-100-… 0 … 300mm
Delay before start-up ≤ 100ms LRT 8/24.14-150-… 0 … 500mm
Electrical data LRT 8/44.1B-150-… 0 … 400mm
Operating voltage UB 10 … 30VDC LRT 8/44.14-150-… 0 … 500mm
Residual ripple ≤ 15% of UB LRT 8/24.10-150-… 0 … 500mm
Open-circuit current ≤ 35mA (10mA)
Switching output …/24… 1 PNP and 1 NPN transistor output, light switching
…/44… 2 PNP transistor outputs, antivalent Scanning range
Function reversible, inverted with +UB on PIN 5 Typ.
Signal voltage high/low ≥ (UB -2V)/≤ 2V Sensor Object
LRT8/24… (white paper) scanning
Output current max. 100mA range
Sensitivity adjustable with 12-turn potentiometer 10mm x 10mm 0…70mm
Indicators .04-50-… 20mm x 20mm 0…100mm
Yellow LED object detected 50mm x 50mm 0…150mm
Mechanical data 10mm x 10mm 0…100mm
Housing metal .04-100-… 20mm x 20mm 0…150mm
Optics cover glass 50mm x 50mm 0…220mm
Weight (plug/cable) 70g/140g
Connection type M12 connector, 5-pin 10mm x 10mm 0…200mm
.14-150-… 20mm x 20mm 0…300mm
Environmental data
50mm x 50mm 0 … 400mm
Ambient temp. (operation/storage) -20°C … +60°C/-40°C … +70°C
Protective circuit 4) 2, 3 10mm x 10mm 0…150mm
VDE safety class 5) II, all-insulated .1B-150-… 20mm x 20mm 0…200mm
Protection class 6) IP 67, IP 69K 7) 50mm x 50mm 0…300mm
Eye safety 370nm: in acc. with EN 62471: exempt group
470nm: in acc. with EN 62471: risk group 1 RED Lyra chalk,
Standards applied IEC 60947-5-2 Sensor Typ.
mark scanning
LRT8/24… (5mm x 30mm)
Options on
range
L/D input
Inverted/not inverted UB/0V or not connected Wood, light, wet 0…80mm
L/D delay < 0.5ms OSB 0…60mm
.00-50-… Paper, black 0…40mm
1) Typ. scanning range limit: max. scanning range achievable on object with maximum size and max. luminescence
effect Paper, white 0…60mm
2) Typ. scanning range: max. scanning range achievable on a typical object (see table) Piece of chalk 0…130mm
3) At +25°C Wood, light, wet 0…350mm
4) 2=polarity reversal protection, 3=short circuit protection for all outputs
OSB 0…300mm
5) Rating voltage 250VAC
6) In end position of the turning connector (turning connector engaged) .10-150-… Paper, black 0…150mm
7) IP 69K test acc. to DIN 40050 part 9 simulated, high pressure cleaning conditions without the use of additives, Paper, white 0…300mm
acids and bases are not part of the test Piece of chalk 0…500mm

Yellow mark Typ.

Sensor (10mm x 30mm) scanning
LRT8/24… on range
Paper, light 0…100mm
.16-80-…
Paper, dark 0…40mm

Remarks Diagrams
Typ. light spot
Operate in accordance with intended use! 35
 This product is not a safety sensor and is not intended as personnel protection. 30 A
Diameter [mm]

B
 The product may only be put into operation by competent persons. 25
C
20
 Only use the product in accordance with the intended use. 15
10
5
0
0 25 50 75 100 150
Scanning range [mm]

A LRT 8/24.14…-S12, LRT 8/44.14…-S12,

LRT 8/24.16…-S12
B LRT 8/24.04…-S12, LRT 8/44.04…-S12
C LRT 8/24.10…-S12

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

LRT 8 Luminescence scanner

Order guide
Selection table

LRT 8/44.1B-150-S12
LRT 8/24.10-150-S12

LRT 8/24.04-100-S12

LRT 8/24.14-150-S12

LRT 8/44.04-100-S12

LRT 8/44.14-150-S12
LRT 8/24.16-80-S12

LRT 8/24.04-50-S12
Part no. 50119033

Part no. 50116732

Part no. 50041840

Part no. 50109343

Part no. 50119032

Part no. 50124694

Part no. 50124693

Part no. 50125896

Order code

Equipment 
Filter for the detection of blue 400 … 500nm 
blue 400 … 750nm     
red 590 … 750nm  
yellow 550 … 750nm 
green 520 … 750nm
Transmitter UV 370nm       
blue 470nm 
Hysteresis standard     
high   
Target application detection of all visible luminescence     
detection of white paper      
detection of yellow print marks 
detection of green print marks
detection of red marks on wood 
Light spot large   
small     
Switching outputs 1 x PNP, 1 x NPN, light switching     
2 x PNP, antivalent   

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net