Scribd
Upload
627 views2 pages

Injector Specification Guide

This document provides specifications for a Stanadyne injector nozzle holder assembly. It includes: 1. Test stand and calibration fluid specifications. 2. An exploded diagram and part numbers for the nozzle holder assembly components. 3. Application and service information including Stanadyne and customer part numbers for different injectors, inscription codes, applications, opening pressures for new and service parts, and nozzle hole specifications.

Uploaded by

Ventas R11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
627 views2 pages

Injector Specification Guide

This document provides specifications for a Stanadyne injector nozzle holder assembly. It includes: 1. Test stand and calibration fluid specifications. 2. An exploded diagram and part numbers for the nozzle holder assembly components. 3. Application and service information including Stanadyne and customer part numbers for different injectors, inscription codes, applications, opening pressures for new and service parts, and nozzle hole specifications.

Uploaded by

Ventas R11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PAGE

STANADYNE” INJECTOR SPECIFICATION


,f----
EDITION: 3 NOZZLE HOLDER
APPLICATIONS: SEE PAGE 2 ASSEMBLY NO. 32653
DATED: 01-l 5-96 SUPERSEDES: XHNM 880474
CUSTOMER: KHD CUSTOMER PART NO. SEE PAGE 2

TEST STAND: IS0 8984 NOTE: Reference Conventional Injector


1. CALIBRATION FLUID...SAE J967 / IS0 4113 Service Manual 99118 for additional
(Ref. S.B. 201). AT ROOM TEMPERATURE (70”-80” F) service information.
2. CALIBRATING HIGH PRESSURE PIPES... 0.063 X 12”
(1.6 X 305 mm)

ITEM PART
NO. NO. QTY. DESCRIPTION
'(lPREFERRED2MAX.)
1 32654 1 BODY, nozzle holder
PART THICKNESS
NO. mm (inches)

2 SEE * SHIM, 29305 1.00 (.039)


TABLE pressure adjusting 29306 1.05 (.041)
29307 1.10 (.043)
29306 1.15 (.045)
3 781720 1 SPRING, 29309 1.20 (.047)
29310 1.25 (.049)
pressure adjusting 29311 1.30 (.051)
29312 1.35 (.053)
29313 1.40(.055)

4 29333 1

5 32655 1 PLATE ASSEMBLY,

32656 2 PIN, dowel

6 PAGE2 1 NOZZLE ASSEMBLY, hole type


(not includedin nozzle holder assembly)

7 32657 1 NUT, nozzle retaining


(torque to 50-60 N.m / 36.9-44.3 Ibfft)

8 ----- 1 WASHER, sealing


(purchased separately)

FOR ENGINEERING USE ONLY

DATE ECNNO. EDITION


11-24-95 24005 1
12-07-95 24005 2
01-15-96 24005 3
PAGE2

APPLICATION AND SERVICE INFORMATION


FOR HOLDER ASSEMBLY 32653

““‘“*
INJECTOR NOZZLE

STANADYNE CUSTOMER CUSTOMER INSCRIPTION APPLICATION


PART NO. PART NO. PART NO. CODE

32784 1227 3190 KY 1227 3191 EY SDLLA 151 M T / D 226 - B 3,4,6


32785 (In-Line Pump)
32823 1227 3161 KY 1227 3162 EY SDLLAI 52M T/D226-B3,4,6
32824 (Rotary Pump)

OPENING PRESSURE
- NEW AND SERVICE
,/--..

INJECTOR MAX VALVE LIFT NO. OF HOLES @ DIA.


NO. MPa (PSI) mm (inches) mm (inches)

32784 23.00 - 23.80 (3335 - 3451) 0.325 (.0128) 4 @ 0.330 (.0130)


32823 23.00 - 23.80 (3335 - 3451) 0.325 (.0128) 5 @ 0.260 (.0102)

for bar multi ly MPa by 10


Maximum va Pve lift for service: +O.O5mm beyond value shown in table.

You might also like