Scribd
Upload
54 views1 page

Routing - Sheet (2) - Upright

The document is a routing sheet for machining an upright part in a mechanical workshop. It lists 9 operations to be performed: 1) Remove burrs after cutting. 2) Mill the blank to size. 3) Perform further operations to complete the project. 4) Mill two slots using side and face milling cutters. 5) Drill and bore to final dimensions using a lathe. 6) Mark a spot for drilling. 7) Drill with twist drills according to the drawing. 8) Create internal threads manually. 9) Assemble the two parts together using screws. The sheet specifies the equipment, machines, tools, and dimensions for each operation.

Uploaded by

alinader20022
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
54 views1 page

Routing - Sheet (2) - Upright

The document is a routing sheet for machining an upright part in a mechanical workshop. It lists 9 operations to be performed: 1) Remove burrs after cutting. 2) Mill the blank to size. 3) Perform further operations to complete the project. 4) Mill two slots using side and face milling cutters. 5) Drill and bore to final dimensions using a lathe. 6) Mark a spot for drilling. 7) Drill with twist drills according to the drawing. 8) Create internal threads manually. 9) Assemble the two parts together using screws. The sheet specifies the equipment, machines, tools, and dimensions for each operation.

Uploaded by

alinader20022
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

MECHNICAL WORKSHOP KFUPM

ROUTING SHEET

Name of Part Upright Part No.

Quantity 1 Material: Steel


OPERATION DESCRIPTION OF EQUIPMENT OR TOOLING
NUMBER OPERATION MACHINES

1 To remove the burrs after cutting Bench Vice Flat File

To make the exact blank size (2″ Side And Face


2 Horizontal Milling Machine
x 2″) Cutter
To do further operation to Angle Plate Vernier Height
3
complete the project Surface Plate (Manual) Gauge
To make two slots by milling
(using Side and Face milling Side And Face
4 Horizontal Milling Machine
cutter) as per the dimensions Milling Cutter
shown in the drawings (3/8″)
Centre Drills
Drilling and boring to get the Pilot Drills
5 final dimensions as Φ0.8125″ by Centre/Engine Lathe (Different Sizes)
using lathe machine 3/4″ Drilling
Boring Tool
To put a mark the on the spot so
6 manual Centre punch
that it can be easily drilled
Drilling with different twist drills
7 Drilling m/c Twist drills
as per drawing
Hand tap
C first tap/ toper tap
Intermediate/plug
8 To make internal threads manual
tap
Bottoming tap/final
tap
To Assemble the two parts 1/4 screw
9 manual
tougher 3/16 screw

You might also like