Mystery

CAL
BY
INAMI_HAEKELZAUBER &
_HAEKELWORLD_
Materials
Cotton yarn (e.g. Scheepjes Catona, Schachenmayr Catania
125m/50g), one ball for the skin colour (for example: blue, mint, light
red)
Two more colours in the same colour range as your main colour
(approximativ 10g each)
Cotton yarn in the colour cream (approx 25g)
Cotton yarn in the colour of your choice for the accessories
(approximativ 30g)
Cotton yarn in yellow (approx 10g)
Safety eyes 10 mm
White and black cotton for the eyes, pink for the cheeks
Thin embroidery thread for the details (white/black)
Hook size 2,5 mm
Scissors
Tapestry blunt needle, sharp needle (for the deepening of the eyes),
stitch marker, pins
Fiber fill
Abbreviations
mr - magic Ring
rd - round
r - row
sc - single crochet
slst - slip stitch
ch - chain
inc - increase
dec - decrease
FLO - front loop only
BLO - back loop only
tch - turning chain
hdc - half double crochet
hdc inc - 2 half double crochet in 1 stitch
dc - double crochet
tr- treble crochet
Part 1
Neckerchief
Crochet in rows. Turn your work after every row. Start with the colour of
your choice.

r1: 5sc in mr + 1tch (5)

r2: inc, 1sc, 3sc in 1 stitch, 1sc, inc + 1tch (9)
r3: inc, 3sc, 3sc in 1 stitch, 3sc, inc + 1tch (13)

Crochet in BLO
r4: inc, 5sc, 3sc in 1 stitch, 5sc, inc + 1tch (17)

Crochet in FLO
R5: inc, 7sc, 3sc in 1 stitch, 7sc, inc + 1tch (21)

Crochet again through both loops

R6: inc, 9sc, 3sc in 1 stitch, 9sc, inc (25)

Lace to tie ends together

30ch, 29slst back, sc along the the top edge of the neckerchief,
30ch, 29slst back.

Pull the yarn through the last loop and secure the yarn.
Part
Head
2
Start with blue (main colour)
rd1: 6sc in mr (6)
rd2: 6sc (6)
rd3: (inc) x3, 3sc (9)
rd4-5: 9sc (2 rounds) (9)
rd6: (inc) x3, 6sc (12)
rd7: 12sc (12)
rd8: (1sc, inc) x6 (18)
rd9: 1sc, inc, (2sc, inc) x5, 1sc (24)
rd10: (3sc, inc) x6 (30)
rd11: 30sc (30)
rd12: 2sc, inc, (4sc, inc) x5, 2sc (36)
rd13-14: 36sc (2 rounds) (36)
rd15: (5sc, inc) x6 (42)
rd16: 3sc, inc, (6sc, inc) x5, 3sc (48)
rd17: 4sc (blue), 5sc (cream), 8sc (blue), 5sc (cream), 26sc (blue)
(48)

rd18: 3sc (blue), 7sc (cream), 6sc (blue), 7sc (cream), 25sc (blue)
(48)

rd19: 3sc (blue), 8sc (cream), 4sc (blue), 8sc (cream), 25sc (blue)
(48)

rd20: 2sc (blue), 9sc (cream), 4sc (blue), 9sc (cream), 24sc (blue)
(48)

rd21: (inc) x2 (blue), inc, 9sc (cream), 2sc (blue),

9sc, inc (cream), (inc) x2, 22sc (blue)
(54)

rd22: 3sc (blue), 26sc (cream), 25sc (blue)

(54)

rd23: 3sc (blue), 26sc (cream), 25sc (blue)

(54)

If you are using safety eyes (10mm), insert them either between rd. 20/21
or rd. 21/22 (what ever you prefer) the distance between the eyes should
be 10 visible stitches (3sc distance to the blue stripes in the middle).
rd24: 3sc (blue), 4sc, dec, (7sc, dec) x2, 2sc (cream),
5sc, dec, (7sc, dec) x2 (blue)
(48)

rd25: 3sc (blue), dec, (6sc, dec) x2, 5sc (cream), 1sc, dec,
(6sc, dec) x2, 3sc (blue)
(42)

rd26: 5sc (blue), dec, (5sc, dec) x2, 1sc (cream), 4sc, dec,
(5sc, dec) x2 (blue)
(36)

rd27: 2sc, dec, 3sc (blue), 1sc, dec, 4sc, dec, 1sc (cream),
3sc, dec, (4sc, dec) x2, 2sc (blue)
(30)

Cut the cream yarn off, now we carry-on with blue (main colour):
rd28: (3sc, dec) x6 (24)
Start to stuff the head firmly.
rd29: (dec) x12 (12)
rd30: 12sc in FLO. (12)

Continue stuffing the head. I always stuff the cheeks a bit more, like that the
head looks wider at the bottom.

Don't cut the yarn off, we will carry-on crocheting the body.
Face modeling

When modeling the face, you can let your imagination go wild. To give it an even cuter
look, you can deepen the eyes (there are several tutorials on how to do that).

If you want to embroider the eyes, use black and white cotton yarn and a colour of
your choice.

The embroidered eyes are between round 19 and 21 in the brighter part of the face.
They go vertical over 3 stitches and are about 10 visible stitches apart. They are made
with approx. 4 black threads, bordered on the outside with a coloured thread and
white thread.

The highlight in the eyes is placed in the middle and about 1 stitch long. You can make
an additional small white spot into the eye. Make the spot restraint. Add the lashes
over 3 stitches. The eyebrows are made with thin black thread, over 1 stitch slightly
angled. There length is about 3 stitches.

If you are using safety eyes you can add the eye white with some white thread and
embroider with black the lashes and eyebrows.
Part 3
Body
Carry-on crocheting with blue (main colour)
rd1: (inc) x12 (24)
rd2: 24sc (24)
rd3: (3sc, inc) x6 (30)
rd4-5: 30sc (2 rounds) (30)
rd6: 2sc, inc, (4sc, inc) x5, 2sc (36)
rd7: 36sc (36)
rd8: (5sc, inc) x6 (42)
rd9: 3sc, inc, (6sc, inc) x5, 3sc (48)
rd10-12: 48sc (3 rounds) (48)
The increase of the next round should be at the back of the body, this will be the
butt. Maybe you have to move the increase, that they are centered at the back.
rd13: 36sc, (1sc, inc) x6
rd14: 54sc
(54)
rd15: (7sc, dec) x6
(54)
rd16: 3sc, dec, (6sc, dec) x5, 3sc
(48)
The decrease of the next round should be at the back of the body where the
(42)
increase were of round 13. Maybe you have to move the decrease, so they are
centered at the back.
rd17: 24sc, (1sc, dec) x6
rd18: 2sc, dec, (4sc, dec) x5, 2sc
(36)
rd19: (3sc, dec) x6 (30)
rd20: 1sc, dec, (2sc, dec) x5, 1sc (24)
rd21: (1sc, dec) x6 (18)
rd22: (dec) x6 (12)
(6)

Stuff the body firmly with filling, best is to start with the stuffing at round 19. Pull the
yarn through the FLO of the remaining 6sc, to close the hole and fasten off.
Part 4
Beanie/hat
Now we crochet in rows. Use the same colour as you used for the
neckerchief:

Leave a long starting yarn and chain 25 and 1 tch. Now you crochet
25 hdc in the BLO and 1 tch until it fits around Tori's head.

Make sure that the last row doesn't end on the same side as the starting
yarn (if so make 1 row less or more).

Pull the yarn through the last stitch, cut if generously off and sew the
ends. You can also crochet the ends with sc together.

Next you guide the yarn evenly through the loops of the edge (e.g. 1cm)
At the end both yarns should come together. Pull the yarn together so
the hole on top of the hat closes. Now you tie the yarns together and sew
the ends.

If you like you can sew on a pompom. You can make one with a pompom
maker or a fork.
Part 5
Claws
Crochet 4x (yellow)

rd1: 6sc in mr (6)

rd2: (1sc, inc) x3 (9)
rd3: 9sc (9)
rd4: (1sc, dec) x3 (6)
rd5: 6sc (6)

After the first claw fasten off and sew the end. Repeat the above for the
second claw, but this time don't fasten off. The claws don't get stuffed.

Chain 1 and connect both claws with a sc, 5sc around the other claw, 1sc in
the ch, 6sc in the 1st claw and 1sc in the ch. (14).

The claws don't get stuffed.

rd2: (5sc, dec) x2

rd3: (2sc, dec) x3 (12)
rd4: 8sc, ch (9)
rd5: 2ch, skip 3sc, 7sc (9)
rd6: (dec, 1sc) x3 (9)
(6)
Pull the yarn through the FLO of the remaining 6sc, close the hole the sew
the end. Repeat above for the second foot.
Part 6
Legs
(yellow)
The legs are crocheted directly on the claws "free space".

Attach the thread new to a stitch in the free space (no matter
where). (This will be your 1st stitch of the leg). In theory the "free
space" only has 6 stitches. So that there is no hole, crochet in
both sides left and right a sc.

rd1: 3sc, sc on the side, 3sc in the ch, sc in the side (8)
rd2-6: 8sc (5 rounds) (8)
Colour change to blue (main colour)
rd7: (1sc, inc) x4 (12)
rd8: (1sc, inc ) x6 (18)
rd9-10: 18 sc (2 rounds) (18)

End the round with a slst. Leave a long tail to sew the legs later to the
body.

Repeat the above for the 2nd leg.

Part 7
Beak
Beak (yelllow)

rd1: 6sc in mr (6)

rd2: (inc) x6 (12)
rd3-4: 12sc (2 rounds) (12)

In the next round we will be making the bottom part of the beak.

rd5: 1sc
in one sc crochet the following:
(1sc, 1hdc, 1dc, 1tr, 1dc, 1hdc, 1sc)
1sc. (9)

Finish the round with a slst and leave a long tail to sew the beak later to the
head.
Part 8
Wings
Start with blue (main colour ) and make 2

rd1: 8sc in mr (8)

rd2: (inc) x8 (16)
rd3: (1sc, inc) x8 (24)
rd4: 1sc, inc, (2sc, inc) x7, 1sc (32)
rd5: (3sc, inc) x8 (40)
rd6: 2sc, inc, (4sc, inc) x7, 2sc (48)
rd7: (5hdc, hdc inc) x8 (56)
Colour change to middle blue (1st secondary colour )
rd8: 3hdc, hdc inc (6hdc, hdc inc) x7, 3hdc (64)
Colour change to a dark blue (2nd secondary colour)
Fold the wings in half and crochet them together as follows:
(7ch, 1sc) x26, in the last 6 stitches (per side) only sc.

The wings don't get stuffed. Pull the thread through the last stich and finish
off.

Leave a long tail to sew the wings later to the body.

Part 9
Tail
 Start with dark blue (2nd secondary colour)
rd1: 13ch
Starting in the 2nd stitch from the needle:
12sc on the one side of the chain,
12sc on the opposite side of the chain (24)
rd2-3: 24sc (2 rounds) (24)
Colour change to middle blue (1st secondary
rd4: colour) (24)
rd5: 24sc (22)
(dec, 10sc) x2
rd6: Change colour to blue (main colour ) (22)
rd7: 22sc (20)
rd8-9: (dec, 9sc) x2 (20)
rd10: 20sc (2 rounds) (18)
rd11: (dec, 8sc) x2 (16)
rd12: (dec, 7sc) x2 (16)
rd13: 16sc (14)
rd14: (dec, 6sc) x2 (12)
rd15: (adec, 5sc) x2 (12)
12sc
The tail doesn't get stuffed. Fold it together and crochet it with 6sc
together.

Cut yarn leaving a long tail, to sew it later to the body.

Part 10
Finishing
Sew everything together
Sew the beak between round 20 and 23. It should lie under the top
of the dark part of the head, therefore in the brighter part. The beak
does not get stuffed.

The feet get sewn to the bottom middle of the body, between round
11 and 22. Stuff the upper part of the leg whilst sewing it on, Tori will
stand a bit more stable that way. The claws should point to the front.

Sew the wings left and right on the single crochet part between
round 1 and 6 slightly angled to the body, like that the wings stay
flexible. The top part of the wings should lie in line with the top of the
head and legs. Pay attention that the wings lie in the correct
direction.

The tail gets sewn to round 15 with the one coloured part laying on
the middle of the body. It should lie in the middle of legs and wings.
 CONGRATULATIONS

Your
finished!!!
 Copyright
This pattern and the design of Tori are the property of @inami_haekelzauber & @_haekelworld_ and are only to be used privately. Neither the
pattern nor parts of it are allowed to be copied, reproduced, translated, sold or published (neither digital nor printed). Photos of Tori are of
course allowed to be shown on the internet but please tag me clearly as the designer @inami_haekelzauber & @_haekelworld_. The toys you
crochet with this pattern are allowed to be sold in a small quantity. Should you have any further questions do not hesitate to contact us on
Instagram.