< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

DESCRIPTION
RD01MUS2B is a MOS FET type transistor designed OUTLINE DRAWING
for VHF/UHF RF driver device.

FEATURES
1.High Power Gain and High Efficiency
Pout>1.0W, Gp=15dB, Drain Effi. =70%typ
@ f=527MHz, VDS=7.2V, Idq=40mA, Pin=30mW
2.Integrated gate protection diode

APPLICATION
For driver stage of high power amplifiers in VHF/UHF
Band mobile radio sets.

RoHS COMPLIANT
RD01MUS2B-501, T513 is EU RoHS compliant.
This product includes the lead in high melting
temperature type solders.
However, it is applicable to the following exceptions of RoHS Directions.
1. Lead in high melting temperature type solders (i.e.tin-lead solder alloys containing more than85% lead.)

ABSOLUTE MAXIMUM RATINGS (Tc=25°C UNLESS OTHERWISE NOTED)

SYMBOL PARAMETER CONDITIONS RATINGS UNIT
VDSS Drain to source voltage VGS=0V 25 V
VGSS Gate to source voltage VDS=0V -5/+10 V
Pch* Channel dissipation Tc=25°C 12.5 W
Pin Input Power Zg=Zl=50 100 mW
ID Drain Current - 600 mA
Tch Channel Temperature - 150 °C
Tstg Storage temperature - -40 to +125 °C
Note: Above parameters are guaranteed independently.
* Theoretical value in case of mounted on infinite heat sink.

ELECTRICAL CHARACTERISTICS (Tc=25°C, UNLESS OTHERWISE NOTED)

LIMITS
SYMBOL PARAMETER CONDITIONS UNIT
MIN TYP MAX
IDSS Zero gate voltage drain current VDS=17V, VGS=0V - - 50 uA
IGSS Gate to source leak current VGS=10V, VDS=0V - - 1 uA
Vth Gate threshold Voltage VDS=7.2V, IDS=1mA 0.5 1.0 1.5 V
Pout Output power VDD=7.2V, Pin=30mW 1.0 1.6 - W
D Drain efficiency f=527MHz,Idq=40mA 60 70 - %
Note: Above parameters, ratings, limits and conditions are subject to change.

TEMPERATURE CHARACTERISTICS (Tc=25°C UNLESS OTHERWISE NOTED)

LIMITS
SYMBOL PARAMETER CONDITIONS UNIT
MIN TYP MAX
Rth(j-c) Thermal Resistance Junction to Case - 4.5 10.0 ℃/W

Publication Date : Dec．2016

1
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

TYPICAL CHARACTERISTICS
(These are only typical curves and devices are not necessarily guaranteed at these curves.)

Publication Date : Dec．2016

2
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

TYPICAL CHARACTERISTICS
(These are only typical curves and devices are not necessarily guaranteed at these curves.)

Publication Date : Dec．2016

3
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

TEST CIRCUIT (f=527MHz)

Part Description Part number Manufacturer

C1, C7, C9, C13 1000 pF GRM1882C1H102JA01 MURATA MANUFACTURING CO.
C2 10 pF GRM1882C1H100JA01 MURATA MANUFACTURING CO.
C3 33 pF GRM2162C1H330JZ01 MURATA MANUFACTURING CO.
C4 22 pF GRM2162C1H220JZ01 MURATA MANUFACTURING CO.
C5 12 pF GRM1882C1H120JA01 MURATA MANUFACTURING CO.
C6 3 pF GRM1882C1H3R0CA01 MURATA MANUFACTURING CO.
C8, C12 0.022 μF GRM188B11H223KA01 MURATA MANUFACTURING CO.
C10, C11 82 pF GRM2162C1H820JZ01 MURATA MANUFACTURING CO.
C14 22 μF UVZ1H220MDD NICHICON CORPORATION
8nH Enameled wire 2Turns,
L1, L2 Diameter:0.23mm,φ1.62mm 2302S Yoneda Processing Place Co.,Ltd.
(the out side diameter)
12nH Enameled wire 3Turns,
L3, L4 Diameter:0.23mm,φ1.62mm 2303S Yoneda Processing Place Co.,Ltd.
(the out side diameter)
29nH Enameled wire 6Turns,
L5 Diameter:0.4mm,φ2.46mm 4006C Yoneda Processing Place Co.,Ltd.
(the out side diameter)
R1 4.7 kΩ RPC05 472-J TAIYOSHA ELECTRIC CO.
R2 100 Ω RPC05 101-J TAIYOSHA ELECTRIC CO.
R3 470 Ω RPC05 0R0 TAIYOSHA ELECTRIC CO.

Publication Date : Dec．2016

4
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

INPUT / OUTPUT IMPEDANCE VS. FREQUENCY CHARACTERISTICS

Publication Date : Dec．2016

5
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

TYPICAL CHARACTERISTICS
(These are only typical curves and devices are not necessarily guaranteed at these curves.)

Publication Date : Dec．2016

6
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

EQUIVALENT CIRCUITRY for VHF EVALUATION BOARD (f=135 – 175MHz)

Part Description Part number Manufacturer

C1, C10 160 pF GRM2162C1H161JA01 MURATA MANUFACTURING CO.
C2 36 pF GRM1882C1H360JA01 MURATA MANUFACTURING CO.
C3, C5 22 pF GRM1882C1H220JA01 MURATA MANUFACTURING CO.
C4 27 pF GRM1882C1H270JA01 MURATA MANUFACTURING CO.
C6 430 pF GRM1882C1H431JA01 MURATA MANUFACTURING CO.
C7 10 pF GRM1882C1H100JA01 MURATA MANUFACTURING CO.
C8 7 pF GRM1882C1H7R0JA01 MURATA MANUFACTURING CO.
C9 18 pF GRM1882C1H180JA01 MURATA MANUFACTURING CO.
C11, C13 1000 pF GRM1882C1H102JA01 MURATA MANUFACTURING CO.
C12, C14 0.022 μF GRM188B11H223KA01 MURATA MANUFACTURING CO.
C15 22 uF UVZ1H220MDD NICHICON CORPORATION
40nH Enameled wire 9Turns,
L1, L3 Diameter:0.23mm,φ1.62mm 2309A Yoneda Processing Place Co.,Ltd.
(the out side diameter)
51nH Enameled wire 11Turns,
L2 Diameter:0.23mm,φ1.62mm 2311A Yoneda Processing Place Co.,Ltd.
(the out side diameter)
12nH Enameled wire 3Turns,
L4, L6 Diameter:0.23mm,φ1.62mm 2303A Yoneda Processing Place Co.,Ltd.
(the out side diameter)
17nH Enameled wire 4Turns,
L5 Diameter:0.23mm,φ1.62mm 2304C Yoneda Processing Place Co.,Ltd.
(the out side diameter)
37nH Enameled wire 7Turns,
L7 Diameter:0.4mm,φ2.46mm 4007C Yoneda Processing Place Co.,Ltd.
(the out side diameter)
R1 4.7 kΩ RPC05 472-J TAIYOSHA ELECTRIC CO.
R2 47 Ω RPC05 470-J TAIYOSHA ELECTRIC CO.

Publication Date : Dec．2016

7
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

Input / Output Impedance VS. Frequency Characteristics

Publication Date : Dec．2016

8
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

TYPICAL CHARACTERISTICS
(These are only typical curves and devices are not necessarily guaranteed at these curves.)

Publication Date : Dec．2016

9
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

EQUIVALENT CIRCUITRY for 900MHz EVALUATION BOARD (f=890 – 941MHz)

Part Description Part number Manufacturer

C1, C11 150 pF GRM2162C1H151JA01 MURATA MANUFACTURING CO.
C2, C3 4 pF CRM2162C1H4R0CD01 MURATA MANUFACTURING CO.
C4 30 pF GRM1882C1H300JA01 MURATA MANUFACTURING CO.
C5, C6, C7, C8 10 pF GRM1882C1H100JA01 MURATA MANUFACTURING CO.
C9 8 pF CRM2162C1H8R0DZ01 MURATA MANUFACTURING CO.
C10 2 pF CRM2162C1H2R0CD01 MURATA MANUFACTURING CO.
C12, C14 100 pF GRM2162C1H101JA01 MURATA MANUFACTURING CO.
C13, C15 1000 pF GRM1882C1H102JA01 MURATA MANUFACTURING CO.
C16 22 uF UVZ1H220MDD NICHICON CORPORATION
37nH Enameled wire 7Turns,
L1 Diameter:0.4mm,φ2.46mm 4007C Yoneda Processing Place Co.,Ltd.
(the out side diameter)
R1 18 Ω RPC05 180-J TAIYOSHA ELECTRIC CO.
R2 4.7 kΩ RPC10 472-J TAIYOSHA ELECTRIC CO.
R3 0Ω RPC10 0R0 TAIYOSHA ELECTRIC CO.

Publication Date : Dec．2016

10
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

Input / Output Impedance VS. Frequency Characteristics

Publication Date : Dec．2016

11
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

S-PARAMETER DATA(VDS=7.2V, Idq=40mA)

Freq. S11 S21 S12 S22
(MHz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang)
100 0.91 -67 21.21 133 0.03 44 0.82 -53
135 0.87 -83 18.35 122 0.04 33 0.76 -67
155 0.85 -91 16.87 116 0.04 27 0.74 -74
175 0.84 -97 15.56 111 0.04 22 0.72 -79
200 0.83 -104 14.09 106 0.04 17 0.70 -85
250 0.81 -115 11.72 96 0.04 9 0.68 -95
300 0.81 -124 9.91 89 0.04 1 0.67 -103
350 0.80 -130 8.50 82 0.04 -5 0.67 -110
400 0.81 -135 7.38 76 0.04 -10 0.68 -115
450 0.81 -140 6.47 71 0.04 -15 0.69 -120
500 0.82 -143 5.72 66 0.04 -19 0.71 -124
520 0.82 -145 5.46 65 0.04 -20 0.71 -125
530 0.82 -145 5.33 64 0.04 -21 0.71 -126
550 0.83 -146 5.10 62 0.04 -23 0.72 -128
600 0.83 -149 4.57 58 0.04 -26 0.74 -131
650 0.84 -152 4.12 54 0.03 -29 0.75 -134
700 0.85 -154 3.73 51 0.03 -32 0.76 -137
750 0.86 -156 3.39 48 0.03 -34 0.78 -140
800 0.86 -158 3.10 45 0.03 -37 0.79 -142
850 0.87 -160 2.84 42 0.03 -39 0.80 -145
900 0.88 -161 2.61 39 0.03 -41 0.81 -147
950 0.88 -163 2.41 36 0.03 -43 0.82 -149
1000 0.89 -164 2.23 34 0.02 -45 0.83 -151
1050 0.89 -166 2.07 31 0.02 -47 0.84 -153
1100 0.90 -167 1.92 29 0.02 -48 0.85 -155
1150 0.90 -168 1.79 27 0.02 -49 0.86 -157
1200 0.90 -170 1.67 25 0.02 -50 0.86 -159
1250 0.91 -171 1.56 23 0.02 -51 0.87 -160
1300 0.91 -172 1.47 20 0.02 -52 0.88 -162
1350 0.91 -173 1.38 19 0.01 -52 0.88 -163
1400 0.92 -174 1.30 17 0.01 -53 0.88 -165
1450 0.92 -176 1.22 15 0.01 -53 0.88 -167
1500 0.92 -177 1.15 13 0.01 -52 0.89 -168

Publication Date : Dec．2016

12
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

ATTENTION:
1.High Temperature ; This product might have a heat generation while operation,Please take notice that have
a possibility to receive a burn to touch the operating product directly or touch the product until cold after switch
off. At the near the product,do not place the combustible material that have possibilities to arise the fire.
2.Generation of High Frequency Power ; This product generate a high frequency power. Please take notice
that do not leakage the unnecessary electric wave and use this products without cause damage for human and
property per normal operation.
3.Before use; Before use the product,Please design the equipment in consideration of the risk for human and
electric wave obstacle for equipment.

PRECAUTIONS FOR THE USE OF MITSUBISHI SILICON RF POWER DEVICES:

1. The specifications of mention are not guarantee values in this data sheet. Please confirm additional details
regarding operation of these products from the formal specification sheet. For copies of the formal
specification sheets, please contact one of our sales offices.

2.RA series products (RF power amplifier modules) and RD series products (RF power transistors) are designed
for consumer mobile communication terminals and were not specifically designed for use in other applications.
In particular, while these products are highly reliable for their designed purpose, they are not manufactured
under a quality assurance testing protocol that is sufficient to guarantee the level of reliability typically deemed
necessary for critical communications elements and In the application, which is base station applications and
fixed station applications that operate with long term continuous transmission and a higher on-off frequency
during transmitting, please consider the derating, the redundancy system, appropriate setting of the maintain
period and others as needed. For the reliability report which is described about predicted operating life time of
Mitsubishi Silicon RF Products , please contact Mitsubishi Electric Corporation or an authorized Mitsubishi
Semiconductor product distributor.

3. RD series products use MOSFET semiconductor technology. They are sensitive to ESD voltage therefore
appropriate ESD precautions are required.

4. In the case of use in below than recommended frequency, there is possibility to occur that the device is
deteriorated or destroyed due to the RF-swing exceed the breakdown voltage.

5. In order to maximize reliability of the equipment, it is better to keep the devices temperature low. It is
recommended to utilize a sufficient sized heat-sink in conjunction with other cooling methods as needed (fan,
etc.) to keep the channel temperature for RD series products lower than 120deg/C(in case of
Tchmax=150deg/C) ,140deg/C(in case of Tchmax=175deg/C) under standard conditions.

6. Do not use the device at the exceeded the maximum rating condition. In case of plastic molded devices, the
exceeded maximum rating condition may cause blowout, smoldering or catch fire of the molding resin due to
extreme short current flow between the drain and the source of the device. These results causes in fire or
injury.

7. For specific precautions regarding assembly of these products into the equipment, please refer to the
supplementary items in the specification sheet.

8. Warranty for the product is void if the products protective cap (lid) is removed or if the product is modified in
any way from it’s original form.

9. For additional “Safety first” in your circuit design and notes regarding the materials, please refer the last page
of this data sheet.

Publication Date : Dec．2016

13
< Silicon RF Power MOS FET (Discrete) >

RD01MUS2B
RoHS Compliance, Silicon MOSFET Power Transistor 527MHz, 1W, 7.2V

10. Please avoid use in the place where water or organic solvents can adhere directly to the product and the
environments with the possibility of caustic gas, dust, salinity, etc. Reliability could be markedly decreased
and also there is a possibility failures could result causing a serious accident. Likewise, there is a possibility
of causing a serious accident if used in an explosive gas environment. Please allow for adequate safety
margin in your designs.

11. Please refer to the additional precautions in the formal specification sheet.

Keep safety first in your circuit designs!

Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead
to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit
designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of
non-flammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

•These materials are intended as a reference to assist our customers in the selection of the Mitsubishi
semiconductor product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.
•Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s
rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
•All information contained in these materials, including product data, diagrams, charts, programs and algorithms
represents information on products at the time of publication of these materials, and are subject to change by
Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore
recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor
product distributor for the latest product information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric
Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or
errors.
Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including
the Mitsubishi Semiconductor home page (http://www.MitsubishiElectric.com/).
•When using any or all of the information contained in these materials, including product data, diagrams, charts,
programs, and algorithms, please be sure to evaluate all information as a total system before making a final
decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no
responsibility for any damage, liability or other loss resulting from the information contained herein.
•Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system
that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric
Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product
contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical,
aerospace, nuclear, or undersea repeater use.
•The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part
these materials.
•If these products or technologies are subject to the Japanese export control restrictions, they must be exported
under a license from the Japanese government and cannot be imported into a country other than the approved
destination.
Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of
destination is prohibited.
•Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for
further details on these materials or the products contained therein.

© 2016 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.

Publication Date : Dec．2016

14