POWERED by
Perkins Engine
ISO 9001 : 2008
Made in UK
ISO 14001 : 2004
ATP60 DIESEL GENSET
ATP
ATP60, DIESEL GENSET MADE IN UK
STANDARD SPECIFICATION
Three phase four wires, output voltages 100-440V, 50HZ, between 0.8 lagging, protection capability abiding by
the standards of NEMA1 and IP23.
General features: PERKINS UK
● Composed of Perkins diesel engine and
European Type alternator
● Oil and fuel filter fitted, water separator
● Lube-oil drain valve fitted
● Electric starter motor 12 V.D.C
● Output range: Prime-60kVA / Standby-66KVA
● Engine model: 1103A-33TG2
● Induction system: Turbocharged
● 8-hour operation base tank
● Key start / auto start
● Mechanical /Electrical governor
● 4 pole MCB, set mounted starting battery
● Optional soundproof or weatherproof canopy
● Operation & Maintenance manual
● Special Integrated Steel Base tank and sprayed
Overall in gloss enamel paint
● Canopy Color: White
50HZ at 15
1500 RPM, 3 -PHASE, 400V
400V
Model Perkins Engine, Lubricat
Alternator Combustion
Tank ion Canopy
Fuel Bore/ Cyl Type Air Flow
ATP60 KVA KW Model stroke (L) Capacit Type
Con.L/h . m³/min
mm y(L)
Prime 60 48 EUROPEAN
1103A-33TG2 14.1 105*127 3L 245 4.3 8 S60
Standby 66 52.8 TYPE
(1) Available in the following voltages: 440/254-415/240V-400/230V-380/220V-220/127V-200-115V;
(2) ISO 8528: Altitude: 1000m above sea level. Derating please contact us or refer to data sheets
PRIME：Prime Power is available for an unlimited number of annual operating hours in variable load applications, in accordance
with ISO 8528-1. A 10% overload capability is available for a period of 1 hour within 12-hour period of operation, in accordance
with ISO 3046-1
STANDBY：The standby power rating is applicable for supplying emergency power in variable load applications in accordance with
o
ISO 8528-1. Overload is not allowed. This generator works normally at 55 C with derating.
Manufacture reserves the right to make changes in model, technical specifications color, equipment and accessories without prior
notice.
Weight and Dimensions
Open Model Excluding option
Overall size (L*W*h), mm:
1760*760*1260
Weight (kg):1100
With Optional Enclosure
Overall size (L*W*h), mm:
2580*1060*1500
Weight (kg) :1900
www.atgenerators.com
Page 1 of 3
POWERED by
Perkins Engine ISO 9001 : 2008
Made in UK ISO 14001 : 2004 ATP60 DIESEL GENSET
SPECIFICATION & CAPABILITY
GENSET SPECIFICATION ENGINE SPECIFICATION
Voltage Regulation
Voltage regulation maintained within ±0.5% PERKINS（UK) 1103A -33TG2
● Between 0.8 and 1.0 lagging and unity In-line direct injection 3-cylinder diesel engine.
● From no load to full load
● At speed droop variation up to 4.5% Type
Water cooled, four cycle, Turbocharged
Frequency Adjustable Ratio
● Change load from 0-100%, within 1.0% (electric Construction
speed regulator), within 4.5% (mechanical speed Two valves per cylinder, forged steel crankshaft and
regulator) connecting rods,
cast iron block.
Frequency Undulation Starter 12 volt negative earth. battery charging
● Load from 0-100%, Frequency undulation within alternator 35 amp on engine. Cranking current 640
0.25% amps at 0oc.
● No load wire volts max undulation ratio within 1.8%
● Three phrase balanced load in the order of 5% Fuel System
Effect factor of telecom 12 volt fail safe actuator. Spin-on paper
● TIF better than 50 element fuel filters with Bosch fuel pump injection
● THF to BS4999 Part 40 better than 2% system with integral
Electronic governor. Dual flexible fuel lines
Electromagnetism And connectors. Standard fuel water separator.
In compliance with BS800 and VDE levels G and N
Filters.
CRITERION Air cleaner with dry element and restriction indicator.
ISO3046、ISO8528、BS4999、BS5514 Spin full flow lube oil filter.
BS5000PT99、AS1359, IEC34 Oil cooler. Drain Tap
UTE5100、VDE0530
CSA A22.2、CEMA, NEA
CONTROL PANELS
DSE-
DSE-3110 / 4410 CONTROL PANEL DSE-
DSE-7320 / 7420 CONTROL PANEL
Standard Control Function Standard Control
The Model 3110 / 4410 is a Manual Engine Control Function
Module, which has been designed to manually control ● Under / Over Mains Volts
the engine via a key switch on the front panel. The /Frequency
module is used to start ● External Remote control
and stop the engine, start output (load / un-load)
indicating fault
conditions; ● Configurable relay
automatically shutting outputs
down the engine and ● Synchronization auto /
indicating the engine synchronization output
failure by LED giving ● All function telecom
true first up fault remote control
annunciation. ● Engine and Alternator
► Manual Engine instrumentation monitor
Control Module ● Configurable input trip point by 9 users
► Low Oil Pressure ● 4 user output trip point
► High Engine ● Control LCD brightness in low brightness
Temperature
► Auxiliary Shutdown environment
► Overspeed ● PIN password
Protection ● Send SMS via GSM modem
► Protection hold-off timer ● Reflect load relay output
► Charge Failure warning ● Control vary trip point
www.atgenerators.com
Page 2 of 3
POWERED by
Perkins Engine ISO 9001 : 2008
Made in UK ISO 14001 : 2004 ATP60 DIESEL GENSET
CONTROL PANELS -- DEEPSEA ELCTRONICS CONTROL PANEL 7230 / 7420
The Model 7320 / 7420 is an ► Charge alternator failure ►Automatic engine starting &
Automatic ► Emergency stop stopping
Engine Control Module which has ► Low oil pressure ►Automatic shutdown on fault
been designed to allow the OEM to ► High engine temperature condition
capability within the industry. The ► Fail to start ►Custom graphical icon type display
module has been designed to ► Fail to come to rest ►Provides engine and generator
automatically start and stop the ► Loss of speed sensing signal instrumentation
engine, indicating the operational ►Provides engine alarms and status
status and fault conditions, shutting Digital Inputs information
down the engine and indicating the ► Emergency Stop - A N/C DC ►LED & LCD alarm indication
engine failure by means of a positive input ►Compatible with 5200, 5300 and
graphical LCD display and a ► 5 fully configurable warning or 5500 series modules for easy
flashing LED on the front panel. shutdown inputs. upgrade path.
Selected operational timers and
alarms can be adjusted by the Metering
customer. Generator Volts L1-N, L2-N, L3-N
Configuration of the module can Generator Volts L1-L2, L2-L3,
be carried out manually utilising the L3-L1
front panel editor, or alternatively by Generator Amps L1,L2, L3
PC, using the 7320 / 7420software. Generator Frequency Hz
Operation of the module is via Engine Speed RPM
pushbuttons mounted on the front Engine Oil Pressure (PSI & Bar)
panel with STOP, AUTO and Engine Temperature (°C &°F)
MANUAL modes. Plant Battery Volts
A further pushbutton provides an Engine Hours Run
LCD DISPLAY SCROLL function to
view the instrumentation. FEATURES Control Panel By
►Micro-processor based design
Multiple alarm channels ►Fully PC or front panel
► Under/Over speed configuration
AC ALTERNATOR
EUROPEAN TYPE GENERATOR END Alternator Technical Data
EUROPEAN TYPE has a long history of producing
high-quality reliable products for the power generation Generator Frame 18/22
market. Their portfolio of high quality generator ends is Exciter Brushless
recognized as an industry standard. Cooling Fan Cast alloy aluminum
Bearing Single, double shielded
Alternator Technical Data Windings 100% copper
European Type AC alternator Connection Type Reconnectable
● Brushless, self exciting
Insulation Type Class H
● Class ‘H’ insulation
● Standard degree of protection is IP23 Pitch 2/3
● Self regulating Amortisseur Winding Full
● With fan cooling Voltage Regulator SX460 / R250
● Resist humid grease
Voltage Regulation NL - FL ± 1.5%
● AC excitation, rotating rectification tube
● Stator grease insulation covered Underspeed Protection Standard
● Rotator and excitation high polymer, Resist the Overexcitation Protection IP23
corruption of oil and acid. Standards NEMA, IEC, IEEE, CSA, BS
● Rotator balance is in accordance with BS5625
Phase Sequence A(U), B(V), C(W)
standard 12.5
● High-quality lubrication sealed long-time bearing TIF (1960 Weightings) <50
● Rotator silicon steel close tight Excitation System PMG - optional
★ In line with our policy of continuous product development,
we reserve the right to change specification without notice.
A.T. Generators (UAE) FZC
Sharjah – Saif Zone (A2-018) Jebel Ali – Free Zone (MO-0504)
Tel : +971-6-557 0560 Fax: +971-6-557 0935 Tel : +971 4 881 0444 Fax: +971 4 881 0446
Mob.: +971 55 772 1133, www.atgenerators.com
E-mail: info@atgenerators.com
www.atgenerators.com
Page 3 of 3
