Dowel Pins - hardened and ground steel

DIN 6325, ISO 8734

P1204
Material
Through hardened and ground steel.
d

Double shear
strength (kN)

P1204.01-04
P1204.01-05
P1204.01-06
P1204.01-08
P1204.01-10
P1204.01-12

1
1
1
1
1
1

4
5
6
8
10
12

1,5
1,5
1,5
1,5
1,5
1,5

P1204.01.5-04
P1204.01.5-05
P1204.01.5-06
P1204.01.5-08
P1204.01.5-10
P1204.01.5-12
P1204.01.5-14
P1204.01.5-16

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

4
5
6
8
10
12
14
16

3,4
3,4
3,4
3,4
3,4
3,4
3,4
3,4

P1204.02-04
P1204.02-05
P1204.02-06
P1204.02-08
P1204.02-10
P1204.02-12
P1204.02-14
P1204.02-16
P1204.02-18
P1204.02-20
P1204.02-24

2
2
2
2
2
2
2
2
2
2
2

4
5
6
8
10
12
14
16
18
20
24

5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5

P1204.02,5-05
P1204.02,5-06
P1204.02,5-08
P1204.02,5-10
P1204.02,5-12
P1204.02,5-14
P1204.02,5-16
P1204.02,5-18
P1204.02,5-20
P1204.02,5-24

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2.5

5
6
8
10
12
14
16
18
20
24

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

P1204.03-05
P1204.03-06
P1204.03-08
P1204.03-10
P1204.03-12
P1204.03-14
P1204.03-16
P1204.03-18
P1204.03-20
P1204.03-24
P1204.03-28
P1204.03-30

3
3
3
3
3
3
3
3
3
3
3
3

5
6
8
10
12
14
16
18
20
24
28
30

13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0

Technical Notes
To DIN 6325, ISO 8734.
m6 diameter tolerance.
Length tolerances to js14.
Sold in packs of 10.
Tips
For larger sizes please see
following pages.

PINS & WASHERS

Order No.

Dowel Pins - hardened and ground steel

DIN 6325, ISO 8734

P1204
Material
Through hardened and ground steel.
Technical Notes
To DIN 6325, ISO 8734.
m6 diameter tolerance.
Length tolerances to js14.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.

PINS & WASHERS

Order No.

Double shear
strength (kN)

P1204.04-06
P1204.04-08
P1204.04-10
P1204.04-12
P1204.04-14
P1204.04-16
P1204.04-18
P1204.04-20
P1204.04-24
P1204.04-28
P1204.04-30
P1204.04-32
P1204.04-36
P1204.04-40
P1204.04-45
P1204.04-50

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

6
8
10
12
14
16
18
20
24
28
30
32
36
40
45
50

22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0

P1204.05-06
P1204.05-08
P1204.05-10
P1204.05-12
P1204.05-14
P1204.05-16
P1204.05-18
P1204.05-20
P1204.05-24
P1204.05-28
P1204.05-30
P1204.05-32
P1204.05-36
P1204.05-40
P1204.05-45
P1204.05-50
P1204.05-55
P1204.05-60

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

6
8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60

31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0

P1204.06-08
P1204.06-10
P1204.06-12
P1204.06-14
P1204.06-16
P1204.06-18
P1204.06-20
P1204.06-24
P1204.06-28
P1204.06-30
P1204.06-32
P1204.06-36
P1204.06-40
P1204.06-45
P1204.06-50
P1204.06-55
P1204.06-60

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60

53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0
53,0

Dowel Pins - hardened and ground steel

DIN 6325, ISO 8734

P1204
Material
Through hardened and ground steel.
d

Double shear
strength (kN)

P1204.08-10
P1204.08-12
P1204.08-14
P1204.08-16
P1204.08-18
P1204.08-20
P1204.08-24
P1204.08-28
P1204.08-30
P1204.08-32
P1204.08-36
P1204.08-40
P1204.08-45
P1204.08-50
P1204.08-55
P1204.08-60
P1204.08-70
P1204.08-80

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
70
80

88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0
88,0

P1204.10-16
P1204.10-18
P1204.10-20
P1204.10-24
P1204.10-28
P1204.10-30
P1204.10-32
P1204.10-36
P1204.10-40
P1204.10-45
P1204.10-50
P1204.10-55
P1204.10-60
P1204.10-70
P1204.10-80
P1204.10-90
P1204.10-100
P1204.10-110
P1204.10-120

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

16
18
20
24
28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0
132,0

P1204.12-18
P1204.12-20
P1204.12-24
P1204.12-28
P1204.12-30
P1204.12-32
P1204.12-36
P1204.12-40
P1204.12-45
P1204.12-50
P1204.12-55

12
12
12
12
12
12
12
12
12
12
12

18
20
24
28
30
32
36
40
45
50
55

210,0
210,0
210,0
210,0
210,0
210,0
210,0
210,0
210,0
210,0
210,0

Technical Notes
To DIN 6325, ISO 8734.
m6 diameter tolerance.
Length tolerances to js14.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.

PINS & WASHERS

Order No.

Dowel Pins - hardened and ground steel

DIN 6325, ISO 8734

P1204
Material
Through hardened and ground steel.
Technical Notes
To DIN 6325, ISO 8734.
m6 diameter tolerance.
Length tolerances to js14.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages.

PINS & WASHERS

Order No.

Double shear
strength (kN)

P1204.12-60
P1204.12-70
P1204.12-80
P1204.12-90
P1204.12-100
P1204.12-110
P1204.12-120

12
12
12
12
12
12
12

60
70
80
90
100
110
120

210,0
210,0
210,0
210,0
210,0
210,0
210,0

P1204.14-28
P1204.14-30
P1204.14-32
P1204.14-36
P1204.14-40
P1204.14-45
P1204.14-50
P1204.14-55
P1204.14-60
P1204.14-70
P1204.14-80
P1204.14-90
P1204.14-100
P1204.14-110
P1204.14-120

14
14
14
14
14
14
14
14
14
14
14
14
14
14
14

28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0
260,0

P1204.16-28
P1204.16-30
P1204.16-32
P1204.16-36
P1204.16-40
P1204.16-45
P1204.16-50
P1204.16-55
P1204.16-60
P1204.16-70
P1204.16-80
P1204.16-90
P1204.16-100
P1204.16-110
P1204.16-120

16
16
16
16
16
16
16
16
16
16
16
16
16
16
16

28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0
350,0

P1204.20-32
P1204.20-36
P1204.20-40
P1204.20-45
P1204.20-50
P1204.20-55
P1204.20-60
P1204.20-70
P1204.20-80
P1204.20-90
P1204.20-100
P1204.20-110
P1204.20-120

20
20
20
20
20
20
20
20
20
20
20
20
20

32
36
40
45
50
55
60
70
80
90
100
110
120

485,0
485,0
485,0
485,0
485,0
485,0
485,0
485,0
485,0
485,0
485,0
485,0
485,0

Dowel Pins - A2 stainless steel

ISO 2338 (1997)

P1206
d

Double shear
strength (kN)

P1206.01-03
P1206.01-04
P1206.01-05
P1206.01-06
P1206.01-08
P1206.01-10
P1206.01-12

1
1
1
1
1
1
1

3
4
5
6
8
10
12

0,7
0,7
0,7
0,7
0,7
0,7
0,7

P1206.01.5-03
P1206.01.5-04
P1206.01.5-05
P1206.01.5-06
P1206.01.5-08
P1206.01.5-10
P1206.01.5-12
P1206.01.5-14
P1206.01.5-16
P1206.01.5-18
P1206.01.5-20
P1206.01.5-24

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

3
4
5
6
8
10
12
14
16
18
20
24

1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7

P1206.02-04
P1206.02-05
P1206.02-06
P1206.02-08
P1206.02-10
P1206.02-12
P1206.02-14
P1206.02-16
P1206.02-18
P1206.02-20
P1206.02-24

2
2
2
2
2
2
2
2
2
2
2

4
5
6
8
10
12
14
16
18
20
24

2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9

P1206.02.5-04
P1206.02.5-05
P1206.02.5-06
P1206.02.5-08
P1206.02.5-10
P1206.02.5-12
P1206.02.5-14
P1206.02.5-16
P1206.02.5-18
P1206.02.5-20
P1206.02.5-24
P1206.02.5-28
P1206.02.5-30

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

4
5
6
8
10
12
14
16
18
20
24
28
30

4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4

P1206.03-05
P1206.03-06
P1206.03-08
P1206.03-10

3
3
3
3

5
6
8
10

6,6
6,6
6,6
6,6

Technical Notes
Ground to m6 (h8 over 16mm).
ISO 2338 (1997).
Length tolerances:
3-10mm long - 0,25
12-50mm long - 0,5
over 50mm long - 0,75.
Sold in packs of 10.
Tips
For larger sizes please see
following pages.
A2 stainless steel grade is a harder
material than the A4 stainless steel
dowel pins (part no. P1207). It is
less resistant to corrosion, but less
expensive than the A4 stainless
steel dowel pins P1207.

PINS & WASHERS

Order No.

Material
A2 stainless steel (1,4305).
Chamfered end, type B.

Dowel Pins - A2 stainless steel

ISO 2338 (1997)

P1206
Material
A2 stainless steel (1,4305).
Chamfered end, type B.
Technical Notes
Ground to m6 (h8 over 16mm).
ISO 2338 (1997).
Length tolerances:
3-10mm long - 0,25
12-50mm long - 0,5
over 50mm long - 0,75.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.
A2 stainless steel grade is a harder
material than the A4 stainless steel
dowel pins (part no. P1207). It is
less resistant to corrosion, but less
expensive than the A4 stainless
steel dowel pins P1207.

PINS & WASHERS

Order No.

Double shear
strength (kN)

P1206.03-12
P1206.03-14
P1206.03-16
P1206.03-18
P1206.03-20
P1206.03-24
P1206.03-28
P1206.03-30
P1206.03-32
P1206.03-36
P1206.03-40
P1206.03-45
P1206.03-50

3
3
3
3
3
3
3
3
3
3
3
3
3

12
14
16
18
20
24
28
30
32
36
40
45
50

6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6

P1206.04-05
P1206.04-06
P1206.04-08
P1206.04-10
P1206.04-12
P1206.04-14
P1206.04-16
P1206.04-18
P1206.04-20
P1206.04-24
P1206.04-28
P1206.04-30
P1206.04-32
P1206.04-36
P1206.04-40
P1206.04-45
P1206.04-50
P1206.04-55
P1206.04-60

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

5
6
8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60

11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7

P1206.05-06
P1206.05-08
P1206.05-10
P1206.05-12
P1206.05-14
P1206.05-16
P1206.05-18
P1206.05-20
P1206.05-24
P1206.05-28
P1206.05-30
P1206.05-32
P1206.05-36
P1206.05-40
P1206.05-45
P1206.05-50
P1206.05-55
P1206.05-60

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

6
8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60

18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1

Dowel Pins - A2 stainless steel

ISO 2338 (1997)

P1206
d

Double shear
strength (kN)

P1206.06-08
P1206.06-10
P1206.06-12
P1206.06-14
P1206.06-16
P1206.06-18
P1206.06-20
P1206.06-24
P1206.06-28
P1206.06-30
P1206.06-32
P1206.06-36
P1206.06-40
P1206.06-45
P1206.06-50
P1206.06-55
P1206.06-60
P1206.06-70
P1206.06-80

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
70
80

26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0

P1206.08-08
P1206.08-10
P1206.08-12
P1206.08-14
P1206.08-16
P1206.08-18
P1206.08-20
P1206.08-24
P1206.08-28
P1206.08-30
P1206.08-32
P1206.08-36
P1206.08-40
P1206.08-45
P1206.08-50
P1206.08-55
P1206.08-60
P1206.08-70
P1206.08-80
P1206.08-90
P1206.08-100
P1206.08-110
P1206.08-120

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0

P1206.10-14
P1206.10-16
P1206.10-18
P1206.10-20
P1206.10-24
P1206.10-28
P1206.10-30
P1206.10-32
P1206.10-36
P1206.10-40

10
10
10
10
10
10
10
10
10
10

14
16
18
20
24
28
30
32
36
40

64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1

Material
A2 stainless steel (1,4305).
Chamfered end, type B.
Technical Notes
Ground to m6 (h8 over 16mm).
ISO 2338 (1997).
Length tolerances:
3-10mm long - 0,25
12-50mm long - 0,5
over 50mm long - 0,75.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.
A2 stainless steel grade is a harder
material than the A4 stainless steel
dowel pins (part no. P1207). It is
less resistant to corrosion, but less
expensive than the A4 stainless
steel dowel pins P1207.

PINS & WASHERS

Order No.

Dowel Pins - A2 stainless steel

ISO 2338 (1997)

P1206
Material
A2 stainless steel (1,4305).
Chamfered end, type B.
Technical Notes
Ground to m6 (h8 over 16mm).
ISO 2338 (1997).
Length tolerances:
3-10mm long - 0,25
12-50mm long - 0,5
over 50mm long - 0,75.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages.
A2 stainless steel grade is a harder
material than the A4 stainless steel
dowel pins (part no. P1207). It is
less resistant to corrosion, but less
expensive than the A4 stainless
steel parts.

PINS & WASHERS

Order No.

Double shear
strength (kN)

P1206.10-45
P1206.10-50
P1206.10-55
P1206.10-60
P1206.10-70
P1206.10-80
P1206.10-90
P1206.10-100
P1206.10-110
P1206.10-120

10
10
10
10
10
10
10
10
10
10

45
50
55
60
70
80
90
100
110
120

64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1

P1206.12-24
P1206.12-28
P1206.12-30
P1206.12-32
P1206.12-36
P1206.12-40
P1206.12-45
P1206.12-50
P1206.12-55
P1206.12-60
P1206.12-70
P1206.12-80
P1206.12-90
P1206.12-100
P1206.12-110
P1206.12-120

12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12

24
28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0

P1206.16-24
P1206.16-28
P1206.16-30
P1206.16-32
P1206.16-36
P1206.16-40
P1206.16-45
P1206.16-50
P1206.16-55
P1206.16-60
P1206.16-70
P1206.16-80
P1206.16-90
P1206.16-100
P1206.16-110
P1206.16-120

16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16

24
28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0
160,0

Dowel Pins - A4 stainless steel

DIN 7

P1207
d

Double shear
strength (kN)

P1207.01-03
P1207.01-04
P1207.01-05
P1207.01-06
P1207.01-08
P1207.01-10
P1207.01-12
P1207.01-14
P1207.01-16

1
1
1
1
1
1
1
1
1

3
4
5
6
8
10
12
14
16

0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15

1
1
1
1
1
1
1
1
1

0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7

P1207.01.5-03
P1207.01.5-04
P1207.01.5-05
P1207.01.5-06
P1207.01.5-08
P1207.01.5-10
P1207.01.5-12
P1207.01.5-14
P1207.01.5-16
P1207.01.5-18
P1207.01.5-20
P1207.01.5-24

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

3
4
5
6
8
10
12
14
16
18
20
24

0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7

P1207.02-04
P1207.02-05
P1207.02-06
P1207.02-08
P1207.02-10
P1207.02-12
P1207.02-14
P1207.02-16
P1207.02-18
P1207.02-20
P1207.02-24

2
2
2
2
2
2
2
2
2
2
2

4
5
6
8
10
12
14
16
18
20
24

0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3

2
2
2
2
2
2
2
2
2
2
2

2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9

P1207.02.5-04
P1207.02.5-05
P1207.02.5-06
P1207.02.5-08
P1207.02.5-10
P1207.02.5-12
P1207.02.5-14
P1207.02.5-16
P1207.02.5-18
P1207.02.5-20
P1207.02.5-24
P1207.02.5-28

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

4
5
6
8
10
12
14
16
18
20
24
28

0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4

Technical Notes
Ground to m6 (h8 over 16mm).
DIN 7.
Length tolerances:
3-10mm long - +0,3:-0
12-50mm long - +0,5:-0
over 50mm long - +0,8:-0
Sold in packs of 10.
Note:Overall length is greater than
the nominal length (see dimension
l and c).
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.
A4 stainless steel grade is a softer
material than the A2 stainless steel
dowel pins (part no. P1206). It is
more resistant to corrosion, and
more expensive than the A2
stainless steel dowel pins P1206.

PINS & WASHERS

Order No.

Material
A4 stainless steel (1,4571).
Rounded end.

Dowel Pins - A4 stainless steel

DIN 7

P1207
Material
A4 stainless steel (1,4571).
Rounded end.
Technical Notes
Ground to m6 (h8 over 16mm).
DIN 7.
Length tolerances:
3-10mm long - +0,3:-0
12-50mm long - +0,5:-0
over 50mm long - +0,8:-0
Sold in packs of 10.
Note:Overall length is greater than
the nominal length (see dimension
l and c).
Sold in packs of 10.
Tips
For larger sizes please see
following pages.
A4 stainless steel grade is a softer
material than the A2 stainless steel
dowel pins (part no. P1206). It is
more resistant to corrosion, and
more expensive than the A2
stainless steel dowel pins P1206.

PINS & WASHERS

Order No.

Double shear
strength (kN)

P1207.03-05
P1207.03-06
P1207.03-08
P1207.03-10
P1207.03-12
P1207.03-14
P1207.03-16
P1207.03-18
P1207.03-20
P1207.03-24
P1207.03-28
P1207.03-32
P1207.03-36
P1207.03-40

3
3
3
3
3
3
3
3
3
3
3
3
3
3

5
6
8
10
12
14
16
18
20
24
28
32
36
40

0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45

3
3
3
3
3
3
3
3
3
3
3
3
3
3

6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6

P1207.04-05
P1207.04-06
P1207.04-08
P1207.04-10
P1207.04-12
P1207.04-14
P1207.04-16
P1207.04-18
P1207.04-20
P1207.04-24
P1207.04-28
P1207.04-32
P1207.04-36
P1207.04-40

4
4
4
4
4
4
4
4
4
4
4
4
4
4

5
6
8
10
12
14
16
18
20
24
28
32
36
40

0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6

4
4
4
4
4
4
4
4
4
4
4
4
4
4

11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7
11,7

P1207.05-06
P1207.05-08
P1207.05-10
P1207.05-12
P1207.05-14
P1207.05-16
P1207.05-18
P1207.05-20
P1207.05-24
P1207.05-28
P1207.05-32
P1207.05-36
P1207.05-40
P1207.05-45
P1207.05-50
P1207.05-60

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

6
8
10
12
14
16
18
20
24
28
32
36
40
45
50
60

0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1
18,1

Dowel Pins - A4 stainless steel

DIN 7

P1207
d

Double shear
strength (kN)

P1207.06-08
P1207.06-10
P1207.06-12
P1207.06-14
P1207.06-16
P1207.06-18
P1207.06-20
P1207.06-24
P1207.06-28
P1207.06-30
P1207.06-32
P1207.06-36
P1207.06-40
P1207.06-45
P1207.06-50
P1207.06-55
P1207.06-60
P1207.06-70
P1207.06-80

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
70
80

0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0

P1207.08-08
P1207.08-10
P1207.08-12
P1207.08-14
P1207.08-16
P1207.08-18
P1207.08-20
P1207.08-24
P1207.08-28
P1207.08-30
P1207.08-32
P1207.08-36
P1207.08-40
P1207.08-45
P1207.08-50
P1207.08-55
P1207.08-60
P1207.08-70
P1207.08-80
P1207.08-90
P1207.08-100
P1207.08-110
P1207.08-120

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0
47,0

Technical Notes
Ground to m6 (h8 over 16mm).
DIN 7.
Length tolerances:
3-10mm long - +0,3:-0
12-50mm long - +0,5:-0
over 50mm long - +0,8:-0
Sold in packs of 10.
Note:Overall length is greater than
the nominal length (see dimension
l and c).
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages.
A4 stainless steel grade is a softer
material than the A2 stainless steel
dowel pins (part no. P1206). It is
more resistant to corrosion, and
more expensive than the A2
stainless steel dowel pins P1206.

PINS & WASHERS

Order No.

Material
A4 stainless steel (1,4571).
Rounded end.

Dowel Pins - A4 stainless steel

DIN 7

P1207
Material
A4 stainless steel (1,4571).
Rounded end.
Technical Notes
Ground to m6 (h8 over 16mm).
DIN 7.
Length tolerances:
3-10mm long - +0,3:-0
12-50mm long - +0,5:-0
over 50mm long - +0,8:-0
Sold in packs of 10.
Note:Overall length is greater than
the nominal length (see dimension
l and c).
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages.
A4 stainless steel grade is a softer
material than the A2 stainless steel
dowel pins (part no. P1206). It is
more resistant to corrosion, and
more expensive than the A2
stainless steel dowel pins P1206.

PINS & WASHERS

Order No.

Double shear
strength (kN)

P1207.10-14
P1207.10-16
P1207.10-18
P1207.10-20
P1207.10-24
P1207.10-28
P1207.10-30
P1207.10-32
P1207.10-36
P1207.10-40
P1207.10-45
P1207.10-50
P1207.10-55
P1207.10-60
P1207.10-70
P1207.10-80
P1207.10-90
P1207.10-100
P1207.10-110
P1207.10-120

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

14
16
18
20
24
28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1
64,1

P1207.12-24
P1207.12-28
P1207.12-30
P1207.12-32
P1207.12-36
P1207.12-40
P1207.12-45
P1207.12-50
P1207.12-55
P1207.12-60
P1207.12-70
P1207.12-80
P1207.12-90
P1207.12-100
P1207.12-110
P1207.12-120

12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12

24
28
30
32
36
40
45
50
55
60
70
80
90
100
110
120

1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8

12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12

92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0
92,0

Dowel Pins - extractable, with air release

DIN 797D

P1212
Material
Hardened and ground steel.
d

Thread

4
4
4
4
4
4
4
4
4
4
4
4
4
4

10
12
14
16
18
20
24
28
30
32
36
40
45
50

M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3

P1212.05-10
P1212.05-12
P1212.05-14
P1212.05-16
P1212.05-18
P1212.05-20
P1212.05-24
P1212.05-28
P1212.05-30
P1212.05-32
P1212.05-36
P1212.05-40
P1212.05-45
P1212.05-50

5
5
5
5
5
5
5
5
5
5
5
5
5
5

10
12
14
16
18
20
24
28
30
32
36
40
45
50

M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3

P1212.06-12
P1212.06-14
P1212.06-16
P1212.06-18
P1212.06-20
P1212.06-24
P1212.06-28
P1212.06-30
P1212.06-32
P1212.06-36
P1212.06-40
P1212.06-45
P1212.06-50
P1212.06-55
P1212.06-60
P1212.06-70
P1212.06-80
P1212.06-90

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
70
80
90

M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4

Technical Notes
To DIN 797D.
Ground to m6 on .
Ground flat along length for air
release.
Length tolerances to js 15.
Sold in packs of 10.
Tips
For larger sizes please see
following pages.

PINS & WASHERS

Order No.
P1212.04-10
P1212.04-12
P1212.04-14
P1212.04-16
P1212.04-18
P1212.04-20
P1212.04-24
P1212.04-28
P1212.04-30
P1212.04-32
P1212.04-36
P1212.04-40
P1212.04-45
P1212.04-50

Dowel Pins - extractable, with air release

DIN 797D

P1212
Material
Hardened and ground steel.
Technical Notes
To DIN 797D.
Ground to m6 on .
Ground flat along length for air
release.
Length tolerances to js 15.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.

PINS & WASHERS

Order No.

Thread

P1212.08-16
P1212.08-18
P1212.08-20
P1212.08-24
P1212.08-28
P1212.08-30
P1212.08-32
P1212.08-36
P1212.08-40
P1212.08-45
P1212.08-50
P1212.08-55
P1212.08-60
P1212.08-70
P1212.08-80
P1212.08-90
P1212.08-100

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

16
18
20
24
28
30
32
36
40
45
50
55
60
70
80
90
100

M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5

P1212.10-16
P1212.10-18
P1212.10-20
P1212.10-24
P1212.10-28
P1212.10-30
P1212.10-32
P1212.10-36
P1212.10-40
P1212.10-45
P1212.10-50
P1212.10-55
P1212.10-60
P1212.10-70
P1212.10-80
P1212.10-90
P1212.10-100
P1212.10-120

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

16
18
20
24
28
30
32
36
40
45
50
55
60
70
80
90
100
120

M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

P1212.12-20
P1212.12-24
P1212.12-28
P1212.12-30
P1212.12-32
P1212.12-36
P1212.12-40
P1212.12-45
P1212.12-50
P1212.12-55
P1212.12-60
P1212.12-70
P1212.12-80
P1212.12-90
P1212.12-100
P1212.12-120

12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12

20
24
28
30
32
36
40
45
50
55
60
70
80
90
100
120

M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Dowel Pins - extractable, with air release

DIN 797D

P1212
Material
Hardened and ground steel.
d

Thread

14
14
14
14
14
14
14
14
14
14
14
14
14
14

28
30
32
36
40
45
50
55
60
70
80
90
100
120

M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

P1212.16-32
P1212.16-36
P1212.16-40
P1212.16-45
P1212.16-50
P1212.16-55
P1212.16-60
P1212.16-70
P1212.16-80
P1212.16-90
P1212.16-100
P1212.16-120

16
16
16
16
16
16
16
16
16
16
16
16

32
36
40
45
50
55
60
70
80
90
100
120

M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

P1212.20-32
P1212.20-36
P1212.20-40
P1212.20-45
P1212.20-50
P1212.20-55
P1212.20-60
P1212.20-70
P1212.20-80
P1212.20-90
P1212.20-100
P1212.20-120

20
20
20
20
20
20
20
20
20
20
20
20

32
36
40
45
50
55
60
70
80
90
100
120

M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10

Technical Notes
To DIN 797D.
Ground to m6 on .
Ground flat along length for air
release.
Length tolerances to js 15.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages.

PINS & WASHERS

Order No.
P1212.14-28
P1212.14-30
P1212.14-32
P1212.14-36
P1212.14-40
P1212.14-45
P1212.14-50
P1212.14-55
P1212.14-60
P1212.14-70
P1212.14-80
P1212.14-90
P1212.14-100
P1212.14-120

Grooved Pins - full length, mild steel

DIN 1473, GP3

P1208
Material
Mild steel WS 1,0718.
d

Dia.
Over grooves

Hole Size
min.

Hole Size
max.

Double Shear
Strength kN

P1208.01-04
P1208.01-05
P1208.01-06
P1208.01-08

1,0
1,0
1,0
1,0

4
5
6
8

0,14
0,14
0,14
0,14

1,05
1,05
1,05
1,05

0,94
0,94
0,94
0,94

1,0
1,0
1,0
1,0

0,7
0,7
0,7
0,7

P1208.01,2-04
P1208.01,2-05
P1208.01,2-06
P1208.01,2-08

1,2
1,2
1,2
1,2

4
5
6
8

0,16
0,16
0,16
0,16

1,25
1,25
1,25
1,25

1,14
1,14
1,14
1,14

1,2
1,2
1,2
1,2

1,0
1,0
1,0
1,0

P1208.01,5-04
P1208.01,5-05
P1208.01,5-06
P1208.01,5-08
P1208.01,5-10
P1208.01,5-12
P1208.01,5-14
P1208.01,5-16
P1208.01,5-18
P1208.01,5-20

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

4
5
6
8
10
12
14
16
18
20

0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20

1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60

1,44
1,44
1,44
1,44
1,44
1,44
1,44
1,44
1,44
1,44

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

P1208.02-04
P1208.02-05
P1208.02-06
P1208.02-08
P1208.02-10
P1208.02-12
P1208.02-14
P1208.02-16
P1208.02-18
P1208.02-20
P1208.02-24
P1208.02-26
P1208.02-28
P1208.02-30

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

4
5
6
8
10
12
14
16
18
20
24
26
28
30

0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25

2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15

1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85

P1208.02,5-06
P1208.02,5-08
P1208.02,5-10
P1208.02,5-12
P1208.02,5-14
P1208.02,5-16
P1208.02,5-18
P1208.02,5-20
P1208.02,5-24
P1208.02,5-26
P1208.02,5-28
P1208.02,5-30

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

6
8
10
12
14
16
18
20
24
26
28
30

0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30

2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65

2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25

Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Grooved Pins - full length

DIN 1473, GP3

P1208
Material
Mild steel WS 1,0718.
Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Dia.
Over grooves

Hole Size
min.

Hole Size
max.

Double Shear
Strength kN

P1208.03-06
P1208.03-08
P1208.03-10
P1208.03-12
P1208.03-14
P1208.03-16
P1208.03-18
P1208.03-20
P1208.03-24
P1208.03-26
P1208.03-28
P1208.03-30

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

6
8
10
12
14
16
18
20
24
26
28
30

0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40

3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20

2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15

P1208.04-06
P1208.04-08
P1208.04-10
P1208.04-12
P1208.04-14
P1208.04-16
P1208.04-18
P1208.04-20
P1208.04-24
P1208.04-26
P1208.04-28
P1208.04-30
P1208.04-32
P1208.04-36
P1208.04-40
P1208.04-45
P1208.04-50

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

6
8
10
12
14
16
18
20
24
26
28
30
32
36
40
45
50

0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50

4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25

3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6

P1208.05-08
P1208.05-10
P1208.05-12
P1208.05-14
P1208.05-16
P1208.05-18
P1208.05-20
P1208.05-24
P1208.05-26
P1208.05-28
P1208.05-30
P1208.05-32
P1208.05-36
P1208.05-40
P1208.05-45
P1208.05-50

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

8
10
12
14
16
18
20
24
26
28
30
32
34
40
45
50

0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60

5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25

4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5

Grooved Pins - full length

DIN 1473, GP3

P1208
Material
Mild steel WS 1,0718.
d

Dia.
Over grooves

Hole Size
min.

Hole size
max.

Double Shear
Strength kN

P1208.06-08
P1208.06-10
P1208.06-12
P1208.06-14
P1208.06-16
P1208.06-18
P1208.06-20
P1208.06-24
P1208.06-26
P1208.06-28
P1208.06-30
P1208.06-32
P1208.06-36
P1208.06-40
P1208.06-45
P1208.06-50
P1208.06-55

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

8
10
12
14
16
18
20
24
26
28
30
32
36
40
45
50
55

0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80

6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30

5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

P1208.08-10
P1208.08-12
P1208.08-14
P1208.08-16
P1208.08-18
P1208.08-20
P1208.08-24
P1208.08-26
P1208.08-28
P1208.08-30
P1208.08-32
P1208.08-36
P1208.08-40
P1208.08-45
P1208.08-50
P1208.08-55
P1208.08-60
P1208.08-65
P1208.08-70

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

10
12
14
16
18
20
24
26
28
30
32
36
40
45
50
55
60
65
70

1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00

8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30

7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5

P1208.10-14
P1208.10-16
P1208.10-18
P1208.10-20
P1208.10-24
P1208.10-26
P1208.10-28
P1208.10-30
P1208.10-32
P1208.10-36
P1208.10-40
P1208.10-45
P1208.10-50

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

14
16
18
20
24
26
28
30
32
36
40
45
50

1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20

10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35

9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2

Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Grooved Pins - full length

DIN 1473, GP3

P1208
Material
Mild steel WS 1,0718.
Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Dia.
Over grooves

Hole Size
min.

Hole Size
max.

Double Shear
Strength kN

P1208.10-55
P1208.10-60
P1208.10-65
P1208.10-70
P1208.10-75
P1208.10-80

10,0
10,0
10,0
10,0
10,0
10,0

55
60
65
70
75
80

1,20
1,20
1,20
1,20
1,20
1,20

10,35
10,35
10,35
10,35
10,35
10,35

9,91
9,91
9,91
9,91
9,91
9,91

10,0
10,0
10,0
10,0
10,0
10,0

63,2
63,2
63,2
63,2
63,2
63,2

P1208.12-14
P1208.12-16
P1208.12-18
P1208.12-20
P1208.12-24
P1208.12-26
P1208.12-28
P1208.12-30
P1208.12-32
P1208.12-36
P1208.12-40
P1208.12-45
P1208.12-50
P1208.12-55
P1208.12-60
P1208.12-65
P1208.12-70
P1208.12-75
P1208.12-80

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

14
16
18
20
24
26
28
30
32
36
40
45
50
55
60
65
70
75
80

1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60

12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35

11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91

Grooved Pins - full length, stainless steel A2

DIN 1473, GP3

P1209
Material
Stainless steel A2 (DIN 1,4305)
d

Dia.
Over grooves

Hole size
min.

Hole size
max.

Double Shear
Strength kN

P1209.01-04
P1209.01-05
P1209.01-06
P1209.01-08

1,0
1,0
1,0
1,0

4
5
6
8

0,14
0,14
0,14
0,14

1,05
1,05
1,05
1,05

0,94
0,94
0,94
0,94

1,0
1,0
1,0
1,0

0,7
0,7
0,7
0,7

P1209.01,2-04
P1209.01,2-05
P1209.01,2-06
P1209.01,2-08

1,2
1,2
1,2
1,2

4
5
6
8

0,16
0,16
0,16
0,16

1,25
1,25
1,25
1,25

1,14
1,14
1,14
1,14

1,2
1,2
1,2
1,2

1,0
1,0
1,0
1,0

P1209.01,5-04
P1209.01,5-05
P1209.01,5-06
P1209.01,5-08
P1209.01,5-10
P1209.01,5-12
P1209.01,5-14
P1209.01,5-16
P1209.01,5-18
P1209.01,5-20

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

4
5
6
8
10
12
14
16
18
20

0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20

1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60

1,44
1,44
1,44
1,44
1,44
1,44
1,44
1,44
1,44
1,44

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

P1209.02-04
P1209.02-05
P1209.02-06
P1209.02-08
P1209.02-10
P1209.02-12
P1209.02-14
P1209.02-16
P1209.02-18
P1209.02-20
P1209.02-24
P1209.02-26
P1209.02-28
P1209.02-30

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

4
5
6
8
10
12
14
16
18
20
24
26
28
30

0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25

2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15
2,15

1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94
1,94

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85
2,85

P1209.02,5-06
P1209.02,5-08
P1209.02,5-10
P1209.02,5-12
P1209.02,5-14
P1209.02,5-16
P1209.02,5-18
P1209.02,5-20
P1209.02,5-24
P1209.02,5-26
P1209.02,5-28
P1209.02,5-30

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

6
8
10
12
14
16
18
20
24
26
28
30

0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30
0,30

2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65

2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44
2,44

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25

Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
For larger sizes please see
following pages.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Grooved Pins - full length, stainless steel A2

DIN 1473, GP3

P1209
Material
Stainless steel A2 (DIN 1,4305)
Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
For smaller sizes please see
previous pages, for larger sizes
please see following pages.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Dia.
Over grooves

Hole Size
min.

Hole Size
max.

Double Shear
Strength kN

P1209.03-06
P1209.03-08
P1209.03-10
P1209.03-12
P1209.03-14
P1209.03-16
P1209.03-18
P1209.03-20
P1209.03-24
P1209.03-26
P1209.03-28
P1209.03-30

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

6
8
10
12
14
16
18
20
24
26
28
30

0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40
0,40

3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20
3,20

2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94
2,94

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15
6,15

P1209.04-06
P1209.04-08
P1209.04-10
P1209.04-12
P1209.04-14
P1209.04-16
P1209.04-18
P1209.04-20
P1209.04-24
P1209.04-26
P1209.04-28
P1209.04-30
P1209.04-32
P1209.04-36
P1209.04-40
P1209.04-45
P1209.04-50

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

6
8
10
12
14
16
18
20
24
26
28
30
32
36
40
45
50

0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50

4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25
4,25

3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93
3,93

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6
10,6

P1209.05-08
P1209.05-10
P1209.05-12
P1209.05-14
P1209.05-16
P1209.05-18
P1209.05-20
P1209.05-24
P1209.05-26
P1209.05-28
P1209.05-30
P1209.05-32
P1209.05-36
P1209.05-40
P1209.05-45
P1209.05-50

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

8
10
12
14
16
18
20
24
26
28
30
32
36
40
45
50

0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60
0,60

5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25

4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93
4,93

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5

Grooved Pins - full length, stainless steel A2

DIN 1473, GP3

P1209
Material
Stainless steel A2 (DIN 1,4305)
d

Dia.
Over Grooves

Hole Size
min.

Hole Size
max.

Double Shear
Strength kN

P1209.06-08
P1209.06-10
P1209.06-12
P1209.06-14
P1209.06-16
P1209.06-18
P1209.06-20
P1209.06-24
P1209.06-26
P1209.06-28
P1209.06-30
P1209.06-32
P1209.06-36
P1209.06-40
P1209.06-45
P1209.06-50
P1209.06-55

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

8
10
12
14
16
18
20
24
26
28
30
32
36
40
45
50
55

0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80

6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30
6,30

5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93
5,93

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8
22,8

P1209.06-60
P1209.08-10
P1209.08-12
P1209.08-14
P1209.08-16
P1209.08-18
P1209.08-20
P1209.08-24
P1209.08-26
P1209.08-28
P1209.08-30
P1209.08-32
P1209.08-36
P1209.08-40
P1209.08-45
P1209.08-50
P1209.08-55
P1209.08-60
P1209.08-65
P1209.08-70

6,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

60
10
12
14
16
18
20
24
26
28
30
32
36
40
45
50
55
60
65
70

0,80
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00

6,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30

5,93
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91
7,91

6,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

22,8
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5
40,5

Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
For smaller sizes please see
previous pages, for larger sizes
please see following pages.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Grooved Pins - full length, stainless steel A2

DIN 1473, GP3

P1209
Material
Stainless steel A2 (DIN 1,4305)
Technical Notes
To DIN 1473, GP 3, similar to ISO
8740.
Allow the use of non precision holes.
Used to fix two or more components
together with maximum rigidity.
Length l does not include radiused
ends.
Length tolerances to js 15.
Sold in packs of 10.
For smaller sizes please see
previous pages.
Tips
Three swaged grooves at 120 pitch
all along the length. When the pin is
driven into the drilled hole the
material displaced is forced back to
close up the groove and lock the pin
into place.

PINS & WASHERS

Order No.

Dia.
Over grooves

Hole Size
min.

Hole Size
max.

Double Shear
Strength kN

P1209.10-14
P1209.10-16
P1209.10-18
P1209.10-20
P1209.10-24
P1209.10-26
P1209.10-28
P1209.10-30
P1209.10-32
P1209.10-36
P1209.10-40
P1209.10-45
P1209.10-50
P1209.10-55
P1209.10-60
P1209.10-65
P1209.10-70
P1209.10-75
P1209.10-80

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

14
16
18
20
24
26
28
30
32
36
40
45
50
55
60
65
70
75
80

1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20

10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35

9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91
9,91

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2
63,2

P1209.12-14
P1209.12-16
P1209.12-18
P1209.12-20
P1209.12-24
P1209.12-26
P1209.12-28
P1209.12-30
P1209.12-32
P1209.12-36
P1209.12-40
P1209.12-45
P1209.12-50
P1209.12-55
P1209.12-60
P1209.12-65
P1209.12-70
P1209.12-75
P1209.12-80

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

14
16
18
20
24
26
28
30
32
36
40
45
50
55
60
65
70
75
80

1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60

12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35
12,35

11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89
11,89

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91

Spirol Spring Pins - carbon steel

ISO 8750, DIN 7343

P1232
Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.
Technical Notes
To ISO 8750, DIN 7343.
These units have an expanded
diameter slightly larger than the
hole for which they are designed,
holding themselves in by radial
tension on the hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Tips
Consists of 2 1/4 coils of steel and
have swaged chamfers at each end.
They are designed for plain drilled
holes, but countersinking the holes
makes insertion easier.
Important Notes
Improves shock absorption.
Easy assembly.

PINS & WASHERS

Order No.

Exp.
dia.
min.

Exp.
dia.
max.

Hole size
min.

Hole size
max.

Double Shear
Strength kN

P1232.01,5-05
P1232.01,5-06
P1232.01,5-08
P1232.01,5-10
P1232.01,5-12
P1232.01,5-14
P1232.01,5-16

1,5
1,5
1,5
1,5
1,5
1,5
1,5

5
6
8
10
12
14
16

1,62
1,62
1,62
1,62
1,62
1,62
1,62

1,73
1,73
1,73
1,73
1,73
1,73
1,73

1,50
1,50
1,50
1,50
1,50
1,50
1,50

1,60
1,60
1,60
1,60
1,60
1,60
1,60

1,45
1,45
1,45
1,45
1,45
1,45
1,45

P1232.02-06
P1232.02-08
P1232.02-10
P1232.02-12
P1232.02-14
P1232.02-16
P1232.02-18
P1232.02-20

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

6
8
10
12
14
16
18
20

2,13
2,13
2,13
2,13
2,13
2,13
2,13
2,13

2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25

1,99
1,99
1,99
1,99
1,99
1,99
1,99
1,99

2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

P1232.02,5-08
P1232.02,5-10
P1232.02,5-12
P1232.02,5-14
P1232.02,5-16
P1232.02,5-18
P1232.02,5-20
P1232.02,5-22
P1232.02,5-24

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

8
10
12
14
16
18
20
22
24

2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65

2,78
2,78
2,78
2,78
2,78
2,78
2,78
2,78
2,78

2,49
2,49
2,49
2,49
2,49
2,49
2,49
2,49
2,49

2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60

3,9
3,9
3,9
3,9
3,9
3,9
3,9
3,9
3,9

P1232.03-08
P1232.03-10
P1232.03-12
P1232.03-14
P1232.03-16
P1232.03-18
P1232.03-20
P1232.03-22
P1232.03-24
P1232.03-26
P1232.03-28
P1232.03-30

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

8
10
12
14
16
18
20
22
24
26
28
30

3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15

3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30

2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99

3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10

5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5

P1232.03,5-12
P1232.03,5-14
P1232.03,5-16
P1232.03,5-18
P1232.03,5-20
P1232.03,5-22
P1232.03,5-24
P1232.03,5-26
P1232.03,5-28
P1232.03,5-30
P1232.03,5-35

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

12
14
16
18
20
22
24
26
28
30
35

3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67

3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84

3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48

3,50
3,50
3,50
3,50
3,50
3,50
3,50
3,50
3,50
3,50
3,50

7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5

Spirol Spring Pins - carbon steel

ISO 8750, DIN 7343

P1232
Exp.
dia.
max.

Hole size
min.

Hole size
max.

Double Shear
Strength kN

Order No.

Exp.
dia.
min.

P1232.04-12
P1232.04-14
P1232.04-16
P1232.04-18
P1232.04-20
P1232.04-22
P1232.04-24
P1232.04-26
P1232.04-28
P1232.04-30
P1232.04-35
P1232.04-40

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

12
14
16
18
20
22
24
26
28
30
35
40

4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20

4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40

3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98

4,00
4,00
4,00
4,00
4,00
4,00
4,00
4,00
4,00
4,00
4,00
4,00

9,6
9,6
9,6
9,6
9,6
9,6
9,6
9,6
9,6
9,6
9,6
9,6

P1232.05-14
P1232.05-16
P1232.05-18
P1232.05-20
P1232.05-22
P1232.05-24
P1232.05-26
P1232.05-28
P1232.05-30
P1232.05-35
P1232.05-40
P1232.05-45

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

14
16
18
20
22
24
26
28
30
35
40
45

5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25

5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50

4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95

5,00
5,00
5,00
5,00
5,00
5,00
5,00
5,00
5,00
5,00
5,00
5,00

15,0
15,0
15,0
15,0
15,0
15,0
15,0
15,0
15,0
15,0
15,0
15,0

P1232.06-16
P1232.06-18
P1232.06-20
P1232.06-22
P1232.06-24
P1232.06-26
P1232.06-28
P1232.06-30
P1232.06-35
P1232.06-40
P1232.06-45
P1232.06-50

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

16
18
20
22
24
26
28
30
35
40
45
50

6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25

5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60

5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95

6,00
6,00
6,00
6,00
6,00
6,00
6,00
6,00
6,00
6,00
6,00
6,00

22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0

P1232.08-20
P1232.08-22
P1232.08-24
P1232.08-26
P1232.08-28
P1232.08-30
P1232.08-35
P1232.08-40
P1232.08-45
P1232.08-50

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

20
22
24
26
28
30
35
40
45
50

8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30

8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60

7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93

8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,00

39,0
39,0
39,0
39,0
39,0
39,0
39,0
39,0
39,0
39,0

Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.
Technical Notes
To ISO 8750, DIN 7343.
These units have an expanded
diameter slightly larger than the
hole for which they are designed,
holding themselves in by radial
tension on the hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Tips
Consists of 2 1/4 coils of steel and
have swaged chamfers at each end.
They are designed for plain drilled
holes, but countersinking the holes
makes insertion easier.
Important Notes

PINS & WASHERS

Improves shock absorption.

Easy assembly.

Spirol Spring Pins - carbon steel

ISO 8750, DIN 7343

P1232
Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.
Technical Notes
To ISO 8750, DIN 7343.
These units have an expanded
diameter slightly larger than the
hole for which they are designed,
holding themselves in by radial
tension on the hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Tips
Consists of 2 1/4 coils of steel and
have swaged chamfers at each end.
They are designed for plain drilled
holes, but countersinking the holes
makes insertion easier.
Important Notes
Improves shock absorption.
Easy assembly.

PINS & WASHERS

Order No.

Exp.
dia.
min

Exp.
dia.
max.

Hole size
min.

Hole size
max.

Double Shear
Strength kN

P1232.08-50
P1232.08-55
P1232.08-60
P1232.08-65
P1232.08-70
P1232.08-75

8,0
8,0
8,0
8,0
8,0
8,0

50
55
60
65
70
75

8,30
8,30
8,30
8,30
8,30
8,30

8,60
8,60
8,60
8,60
8,60
8,60

7,93
7,93
7,93
7,93
7,93
7,93

8,00
8,00
8,00
8,00
8,00
8,00

39,0
39,0
39,0
39,0
39,0
39,0

P1232.10-24
P1232.10-26
P1232.10-28
P1232.10-30
P1232.10-35
P1232.10-40
P1232.10-45
P1232.10-50
P1232.10-55
P1232.10-60
P1232.10-65
P1232.10-70
P1232.10-75
P1232.10-80
P1232.10-85

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

24
26
28
30
35
40
45
50
55
60
65
70
75
80
85

10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35

10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80

9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93

10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00

62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0
62,0

P1232.12-28
P1232.12-30
P1232.12-35
P1232.12-40
P1232.12-45
P1232.12-50
P1232.12-55
P1232.12-60
P1232.12-65
P1232.12-70
P1232.12-75
P1232.12-80
P1232.12-85
P1232.12-90
P1232.12-95
P1232.12-100

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100

12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40

12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85

11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90

12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00

89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0
89,0

Spirol Spring Pins - stainless steel

P1234
Thread
d

Length
l

Exp.dia.min

Exp. dia. max

Hole size min.

Hole size max.

P1234.0.8-004
P1234.0.8-005
P1234.0.8-006
P1234.0.8-008
P1234.0.8-010
P1234.0.8-012

0,8
0,8
0,8
0,8
0,8
0,8

4
5
6
8
10
12

0,85
0,85
0,85
0,85
0,85
0,85

0,91
0,91
0,91
0,91
0,91
0,91

0,80
0,80
0,80
0,80
0,80
0,80

0,84
0,84
0,84
0,84
0,84
0,84

P1234.1.0-004
P1234.1.0-005
P1234.1.0-006
P1234.1.0-008
P1234.1.0-010
P1234.1.0-012

1,0
1,0
1,0
1,0
1,0
1,0

4
5
6
8
10
12

1,05
1,05
1,05
1,05
1,05
1,05

1,15
1,15
1,15
1,15
1,15
1,15

1,00
1,00
1,00
1,00
1,00
1,00

1,04
1,04
1,04
1,04
1,04
1,04

P1234.1.2-004
P1234.1.2-005
P1234.1.2-006
P1234.1.2-008
P1234.1.2-010
P1234.1.2-012

1,2
1,2
1,2
1,2
1,2
1,2

4
5
6
8
10
12

1,25
1,25
1,25
1,25
1,25
1,25

1,35
1,35
1,35
1,35
1,35
1,35

1,20
1,20
1,20
1,20
1,20
1,20

1,24
1,24
1,24
1,24
1,24
1,24

P1234.1.5-005
P1234.1.5-006
P1234.1.5-008
P1234.1.5-010
P1234.1.5-012
P1234.1.5-014
P1234.1.5-016

1,5
1,5
1,5
1,5
1,5
1,5
1,5

5
6
8
10
12
14
16

1,62
1,62
1,62
1,62
1,62
1,62
1,62

1,73
1,73
1,73
1,73
1,73
1,73
1,73

1,50
1,50
1,50
1,50
1,50
1,50
1,50

1,60
1,60
1,60
1,60
1,60
1,60
1,60

P1234.2.0-006
P1234.2.0-008
P1234.2.0-010
P1234.2.0-012
P1234.2.0-014
P1234.2.0-016
P1234.2.0-018
P1234.2.0-020

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

6
8
10
12
14
16
18
20

2,13
2,13
2,13
2,13
2,13
2,13
2,13
2,13

2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25

1,99
1,99
1,99
1,99
1,99
1,99
1,99
1,99

2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10

P1234.2.5-008
P1234.2.5-010
P1234.2.5-012
P1234.2.5-014
P1234.2.5-016
P1234.2.5-018
P1234.2.5-020
P1234.2.5-022
P1234.2.5-024

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

8
10
12
14
16
18
20
22
24

2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65

2,78
2,78
2,78
2,78
2,78
2,78
2,78
2,78
2,78

2,49
2,49
2,49
2,49
2,49
2,49
2,49
2,49
2,49

2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60

Material
Nickel stainless steel 304 - work
hardened.
Technical Notes
To ISO 8750, DIN 7343.
These units have an expanded
diameter slightly larger than the
hole for which they are designed,
holding themselves in by radial
tension on the hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
For larger sizes, please see following
pages.
Tips
Consists of 2 1/4 coils of steel and
have swaged chamfers at each end.
They are designed for plain drilled
holes, but countersinking the holes
makes insertion easier.
Important Notes
Improves shock absorption.
Easy assembly.

PINS & WASHERS

Order No.

Spirol Spring Pins - stainless steel

P1234
Material
Nickel stainless steel 304 - work
hardened.

Order No.

Thread
d

Length
l

Exp.dia.min

Exp. dia. max

Hole size min.

Hole size max.

Technical Notes
To ISO 8750, DIN 7343.
These units have an expanded
diameter slightly larger than the
hole for which they are designed,
holding themselves in by radial
tension on the hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75

P1234.3.0-008
P1234.3.0-010
P1234.3.0-012
P1234.3.0-014
P1234.3.0-016
P1234.3.0-018
P1234.3.0-020
P1234.3.0-022
P1234.3.0-024
P1234.3.0-026
P1234.3.0-028
P1234.3.0-030

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

8
10
12
14
16
18
20
22
24
26
28
30

3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15
3,15

3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30
3,30

2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99
2,99

3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10

P1234.3.5-012
P1234.3.5-014
P1234.3.5-016
P1234.3.5-018
P1234.3.5-020
P1234.3.5-022
P1234.3.5-024
P1234.3.5-026
P1234.3.5-028
P1234.3.5-030
P1234.3.5-035

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

12
14
16
18
20
22
24
26
28
30
35

3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67
3,67

3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84
3,84

3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48
3,48

3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62

P1234.4.0-012
P1234.4.0-014
P1234.4.0-016
P1234.4.0-018
P1234.4.0-020
P1234.4.0-022
P1234.4.0-024
P1234.4.0-026
P1234.4.0-028
P1234.4.0-030
P1234.4.0-035
P1234.4.0-040

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

12
14
16
18
20
22
24
26
28
30
35
40

4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20
4,20

4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40
4,40

3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98
3,98

4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12

P1234.5.0-014
P1234.5.0-016
P1234.5.0-018
P1234.5.0-020
P1234.5.0-022
P1234.5.0-024
P1234.5.0-026
P1234.5.0-028
P1234.5.0-030
P1234.5.0-035
P1234.5.0-040
P1234.5.0-045

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

14
16
18
20
22
24
26
28
30
35
40
45

5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25
5,25

5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50
5,50

4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95
4,95

5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12

Sold in packs of 10.

For smaller sizes, please see
previous pages.
For larger sizes, please see following
pages.
Tips
Consists of 2 1/4 coils of steel and
have swaged chamfers at each end.
They are designed for plain drilled
holes, but countersinking the holes
makes insertion easier.
Important Notes
Improves shock absorption.
Easy assembly.
PINS & WASHERS

Spirol Spring Pins - stainless steel

P1234
Order No.

Thread
d

Length
l

Exp.dia.min

Exp. dia. max

Hole size min.

Hole size max.

Material
Nickel stainless steel 304 - work
hardened.

P1234.6.0-016
P1234.6.0-018
P1234.6.0-020
P1234.6.0-022
P1234.6.0-024
P1234.6.0-026
P1234.6.0-028
P1234.6.0-030
P1234.6.0-035
P1234.6.0-040
P1234.6.0-045
P1234.6.0-050

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

16
18
20
22
24
26
28
30
35
40
45
50

6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25
6,25

5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60
5,60

5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95
5,95

6,13
6,13
6,13
6,13
6,13
6,13
6,13
6,13
6,13
6,13
6,13
6,13

Technical Notes
To ISO 8750, DIN 7343.
These units have an expanded
diameter slightly larger than the
hole for which they are designed,
holding themselves in by radial
tension on the hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75

P1234.8.0-020
P1234.8.0-022
P1234.8.0-024
P1234.8.0-026
P1234.8.0-028
P1234.8.0-030
P1234.8.0-035
P1234.8.0-040
P1234.8.0-045
P1234.8.0-050
P1234.8.0-055
P1234.8.0-060
P1234.8.0-065
P1234.8.0-070
P1234.8.0-075

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

20
22
24
26
28
30
35
40
45
50
55
60
65
70
75

8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30
8,30

8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60
8,60

7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93
7,93

8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17
8,17

P1234.10.0-024
P1234.10.0-026
P1234.10.0-028
P1234.10.0-030
P1234.10.0-035
P1234.10.0-040
P1234.10.0-045
P1234.10.0-050
P1234.10.0-055
P1234.10.0-060
P1234.10.0-065
P1234.10.0-070
P1234.10.0-075
P1234.10.0-080
P1234.10.0-085

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

24
26
28
30
35
40
45
50
55
60
65
70
75
80
85

10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35
10,35

10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80
10,80

9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93
9,93

10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20
10,20

Sold in packs of 10.

For larger sizes, please see previous
pages.
For smaller sizes, please see
previous pages.
Tips
Consists of 2 1/4 coils of steel and
have swaged chamfers at each end.
They are designed for plain drilled
holes, but countersinking the holes
makes insertion easier.
Important Notes

PINS & WASHERS

Improves shock absorption.

Easy assembly.

Spirol Spring Pins - stainless steel

P1234
Material
Nickel stainless steel 304 - work
hardened.
Technical Notes
To ISO 8750, DIN 7343.
These units have an expanded
diameter slightly larger than the
hole for which they are designed,
holding themselves in by radial
tension on the hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
For smaller sizes, please see
previous pages.
Tips
Consists of 2 1/4 coils of steel and
have swaged chamfers at each end.
They are designed for plain drilled
holes, but countersinking the holes
makes insertion easier.
Important Notes
Improves shock absorption.
Easy assembly.

Order No.

Thread
d

Length
l

Exp.dia.min

Exp. dia. max

Hole size min.

Hole size max.

P1234.12.0-028
P1234.12.0-030
P1234.12.0-035
P1234.12.0-040
P1234.12.0-045
P1234.12.0-050
P1234.12.0-055
P1234.12.0-060
P1234.12.0-065
P1234.12.0-070
P1234.12.0-075
P1234.12.0-080
P1234.12.0-085
P1234.12.0-090
P1234.12.0-095
P1234.12.0-0100

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100

12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40
12,40

12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85
12,85

11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90
11,90

12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22
12,22

PINS & WASHERS

Split Cotter Pins - mild steel

DIN 94

P1240
Nom. Dia.

d1 min.

d1 max.

a min.

a max.

P1240.01-06
P1240.01-08
P1240.01-10
P1240.01-12
P1240.01-16
P1240.01-18
P1240.01-20
P1240.01-22
P1240.01-25
P1240.01-28
P1240.01-32
P1240.01-36

1
1
1
1
1
1
1
1
1
1
1
1

6
8
10
12
16
18
20
22
25
28
32
36

0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8

0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9

0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

P1240.01,2-10
P1240.01,2-12
P1240.01,2-16
P1240.01,2-18
P1240.01,2-20
P1240.01,2-22
P1240.01,2-25
P1240.01,2-28
P1240.01,2-32
P1240.01,2-36

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2

10
12
16
18
20
22
25
28
32
36

1
1
1
1
1
1
1
1
1
1

1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

P1240.01,6-10
P1240.01,6-12
P1240.01,6-16
P1240.01,6-18
P1240.01,6-20
P1240.01,6-22
P1240.01,6-25
P1240.01,6-28
P1240.01,6-32
P1240.01,6-36
P1240.01,6-40

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

10
12
16
18
20
22
25
28
32
36
40

1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3

1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

P1240.02-10
P1240.02-12
P1240.02-16
P1240.02-18
P1240.02-20
P1240.02-22
P1240.02-25
P1240.02-28
P1240.02-32
P1240.02-36
P1240.02-40
P1240.02-45
P1240.02-50

2
2
2
2
2
2
2
2
2
2
2
2
2

10
12
16
18
20
22
25
28
32
36
40
45
50

1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7

1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

Material
Mild steel.
Technical Notes
To DIN 94.
Sold in packs of 10.
For larger sizes, please see
following pages.

PINS & WASHERS

Order No.

Split Cotter Pins - mild steel

P1240
Material
Mild steel.
Technical Notes
To DIN 94.
Sold in packs of 10.
For smaller sizes please see
previous pages. For larger sizes,
please see following pages.

PINS & WASHERS

Order No.

Nom. Dia.

d1 min.

d1 max.

a min.

a max.

P1240.02,5-10
P1240.02,5-12
P1240.02,5-16
P1240.02,5-18
P1240.02,5-20
P1240.02,5-22
P1240.02,5-25
P1240.02,5-28
P1240.02,5-32
P1240.02,5-36
P1240.02,5-40
P1240.02,5-45
P1240.02,5-50
P1240.02,5-56
P1240.02,5-63
P1240.02,5-71

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

10
12
16
18
20
22
25
28
32
36
40
45
50
56
63
71

2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1

2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

P1240.03,2-16
P1240.03,2-18
P1240.03,2-20
P1240.03,2-22
P1240.03,2-25
P1240.03,2-28
P1240.03,2-33
P1240.03,2-36
P1240.03,2-40
P1240.03,2-45
P1240.03,2-50
P1240.03,2-56
P1240.03,2-63
P1240.03,2-71

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

16
18
20
22
25
28
33
36
40
45
50
56
63
71

2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7

2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

P1240.04-16
P1240.04-18
P1240.04-20
P1240.04-22
P1240.04-25
P1240.04-28
P1240.04-32
P1240.04-36
P1240.04-40
P1240.04-45
P1240.04-50
P1240.04-56
P1240.04-63
P1240.04-71
P1240.04-80
P1240.04-90
P1240.04-112
P1240.04-125

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

16
18
20
22
25
28
32
36
40
45
50
56
63
71
80
90
112
125

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

Split Cotter Pins - mild steel

DIN 94

P1240
Nom. Dia.

d1 min.

d1 max.

a min.

a max.

P1240.05-16
P1240.05-18
P1240.05-20
P1240.05-22
P1240.05-25
P1240.05-28
P1240.05-32
P1240.05-36
P1240.05-40
P1240.05-45
P1240.05-50
P1240.05-56
P1240.05-63
P1240.05-71
P1240.05-80
P1240.05-90
P1240.05-112
P1240.05-125

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

16
18
20
22
25
28
32
36
40
45
50
56
63
71
80
90
112
125

4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4

4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

P1240.06,3-20
P1240.06,3-22
P1240.06,3-26
P1240.06,3-28
P1240.06,3-32
P1240.06,3-36
P1240.06,3-40
P1240.06,3-45
P1240.06,3-50
P1240.06,3-56
P1240.06,3-63
P1240.06,3-71
P1240.06,3-80
P1240.06,3-90
P1240.06,3-112
P1240.06,3-125
P1240.06,3-140

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

20
22
26
28
32
36
40
45
50
56
63
71
80
90
112
125
140

5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7

5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

P1240.08-32
P1240.08-36
P1240.08-40
P1240.08-45
P1240.08-50
P1240.08-56
P1240.08-63
P1240.08-71
P1240.08-80
P1240.08-90
P1240.08-112
P1240.08-125
P1240.08-140
P1240.08-160

8
8
8
8
8
8
8
8
8
8
8
8
8
8

32
36
40
45
50
56
63
71
80
90
112
125
140
160

7,3
7,3
7,3
7,3
7,3
7,3
7,3
7,3
7,3
7,3
7,3
7,3
7,3
7,3

7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5

2
2
2
2
2
2
2
2
2
2
2
2
2
2

4
4
4
4
4
4
4
4
4
4
4
4
4
4

Material
Mild steel.
Technical Notes
To DIN 94.
Sold in packs of 10.
For smaller sizes please see
previous pages. For larger sizes,
please see following pages.

PINS & WASHERS

Order No.

Split Cotter Pins - mild steel

DIN 94

P1240
Material
Mild steel.
Technical Notes
To DIN 94.
Sold in packs of 10.
For smaller sizes please see
previous pages.

Order No.

Nom. Dia.

d1 min.

d1 max.

a min.

a max.

P1240.10-32
P1240.10-36
P1240.10-40
P1240.10-45
P1240.10-50
P1240.10-56
P1240.10-63
P1240.10-71
P1240.10-80
P1240.10-90
P1240.10-112
P1240.10-125
P1240.10-140
P1240.10-160

10
10
10
10
10
10
10
10
10
10
10
10
10
10

32
36
40
45
50
56
63
71
80
90
112
125
140
160

9,3
9,3
9,3
9,3
9,3
9,3
9,3
9,3
9,3
9,3
9,3
9,3
9,3
9,3

9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3

P1240.12-45
P1240.12-50
P1240.12-56
P1240.12-63
P1240.12-71
P1240.12-80
P1240.12-90
P1240.12-112
P1240.12-125
P1240.12-140
P1240.12-160

12
12
12
12
12
12
12
12
12
12
12

45
50
56
63
71
80
90
112
125
140
160

12,1
12,1
12,1
12,1
12,1
12,1
12,1
12,1
12,1
12,1
12,1

12,4
12,4
12,4
12,4
12,4
12,4
12,4
12,4
12,4
12,4
12,4

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3

PINS & WASHERS

Split Cotter Pins - stainless steel

P1241
Nom. dia.

d1 min.

d1 max.

a min.

a max.

P1241.01-06
P1241.01-08
P1241.01-10
P1241.01-12
P1241.01-16
P1241.01-18
P1241.01-20
P1241.01-22
P1241.01-25
P1241.01-28
P1241.01-32
P1241.01-36

1
1
1
1
1
1
1
1
1
1
1
1

6
8
10
12
16
18
20
22
25
28
32
36

0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8

0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
1,6
0,9

0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

P1241.01,2-10
P1241.01,2-12
P1241.01,2-16
P1241.01,2-18
P1241.01,2-20
P1241.01,2-22
P1241.01,2-25
P1241.01,2-28
P1241.01,2-32
P1241.01,2-36

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2

10
12
16
18
20
22
25
28
32
36

1
1
1
1
1
1
1
1
1
1

1,09
1,09
1,09
1,09
1,09
1,09
1,09
1,09
1,09
1,09

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

P1241.01,6-10
P1241.01,6-12
P1241.01,6-16
P1241.01,6-18
P1241.01,6-20
P1241.01,6-22
P1241.01,6-25
P1241.01,6-28
P1241.01,6-32
P1241.01,6-36
P1241.01,6-40

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

10
12
16
18
20
22
25
28
32
36
40

1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3

1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4
1,4

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

P1241.02-10
P1241.02-12
P1241.02-16
P1241.02-18
P1241.02-20
P1241.02-22
P1241.02-25
P1241.02-28
P1241.02-32
P1241.02-36
P1241.02-40
P1241.02-45
P1241.02-50

2
2
2
2
2
2
2
2
2
2
2
2
2

10
12
16
18
20
22
25
28
32
36
40
45
50

1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7

1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

Material
Stainless steel A2, WS 1,4301.
Technical Notes
To DIN 94.
Equivalent to ISO 1234.
Sold in packs of 10.

PINS & WASHERS

Order No.

Split Cotter Pins - stainless steel

P1241
Material
Stainless steel A2, WS 1,4301.
Technical Notes
To DIN 94.
Equivalent to ISO 1234.
Sold in packs of 10.

PINS & WASHERS

Order No.

Nom dia.

d1 min.

d1 max.

a min.

a max.

P1241.02,5-10
P1241.02,5-12
P1241.02,5-16
P1241.02,5-18
P1241.02,5-20
P1241.02,5-22
P1241.02,5-25
P1241.02,5-28
P1241.02,5-32
P1241.02,5-38
P1241.02,5-40
P1241.02,5-45
P1241.02,5-50
P1241.02,5-56
P1241.02,5-63
P1241.02,5-71

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

10
12
16
18
20
22
25
28
32
38
40
45
50
56
63
71

2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1

2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3

1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25
1,25

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

P1241.03,2-16
P1241.03,2-18
P1241.03,2-20
P1241.03,2-22
P1241.03,2-26
P1241.03,2-28
P1241.03,2-32
P1241.03,2-36
P1241.03,2-40
P1241.03,2-45
P1241.03,2-50
P1241.03,2-56
P1241.03,2-63
P1241.03,2-71

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

16
18
20
22
26
28
32
36
40
45
50
56
63
71

2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7
2,7

2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

P1241.04-16
P1241.04-18
P1241.04-20
P1241.04-22
P1241.04-25
P1241.04-28
P1241.04-32
P1241.04-36
P1241.04-40
P1241.04-45
P1241.04-50
P1241.04-56
P1241.04-63
P1241.04-71
P1241.04-80
P1241.04-90
P1241.04-112
P1241.04-112

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

16
18
20
22
25
28
32
36
40
45
50
56
63
71
80
90
112
125

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7
3,7

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

Split Cotter Pins - stainless steel

P1241
Nom. dia.

d1 min.

d1 max.

a min.

a max.

P1241.05-16
P1241.05-18
P1241.05-20
P1241.05-22
P1241.05-25
P1241.05-28
P1241.05-32
P1241.05-36
P1241.05-40
P1241.05-45
P1241.05-50
P1241.05-56
P1241.05-63
P1241.05-71
P1241.05-80
P1241.05-90
P1241.05-112
P1241.05-125

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

16
18
20
22
25
28
32
36
40
45
50
56
63
71
80
90
112
125

4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4

4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

P1241.06,3-20
P1241.06,3-22
P1241.06,3-26
P1241.06,3-28
P1241.06,3-32
P1241.06,3-36
P1241.06,3-40
P1241.06,3-45
P1241.06,3-50
P1241.06,3-56
P1241.06,3-63
P1241.06,3-71
P1241.06,3-80
P1241.06,3-90
P1241.06,3-112
P1241.06,3-125
P1241.06,3-140

6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3

20
22
26
28
32
36
40
45
50
56
63
71
80
90
112
125
140

5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7
5,7

5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9
5,9

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

Material
Stainless steel A2, WS 1,4301.
Technical Notes
To DIN 94.
Equivalent to ISO 1234.
Sold in packs of 10.

PINS & WASHERS

Order No.

Clevis Pins
DIN 1444 type B

P1242
Material
Mild steel, zinc plated.
To ISO 2341 Form B,
DIN1444 type B.
Technical Notes
The nominal length is the total
length from under L1 head to the
end of the pin.
The grip length G1 is [L1 - L2 (Ad1)].
Diameter tolerance h11.
Length tolerances:up to 10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
For larger sizes see next page.
Tips
For use with cotter pins.
(P1240 or P1241) or retaining pins
(P1243).

PINS & WASHERS

Order No.

d
h11

L1

G1

d1

L2

P1242.05-10
P1242.05-12
P1242.05-16
P1242.05-18
P1242.05-20
P1242.05-22
P1242.05-24
P1242.05-26
P1242.05-28
P1242.05-30
P1242.05-32
P1242.05-35
P1242.05-40
P1242.05-45
P1242.05-50

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

10
12
16
18
20
22
24
26
28
30
32
35
40
45
50

6,5
8,5
12,5
14,5
16,5
18,5
20,5
22,5
24,5
26,5
28,5
31,2
36,2
41,2
46,2

8
8
8
8
8
8
8
8
8
8
8
10
10
10
10

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,6
1,6
1,6
1,6

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
2
2
2
2

2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
3,2
3,2
3,2
3,2

P1242.06-12
P1242.06-16
P1242.06-18
P1242.06-20
P1242.06-22
P1242.06-24
P1242.06-26
P1242.06-28
P1242.06-30
P1242.06-32
P1242.06-35
P1242.06-40
P1242.06-45
P1242.06-50
P1242.06-55
P1242.06-60

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

12
16
18
20
22
24
26
28
30
32
35
40
45
50
55
60

8,2
12,2
14,2
16,2
18,2
20,2
22,2
24,2
26,2
28,2
31,2
36,2
40,5
45,5
50,5
55,5

10
10
10
10
10
10
10
10
10
10
10
10
14
14
14
14

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
2
2
2
2

2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,5
3,5
3,5
3,5

P1242.08-16
P1242.08-18
P1242.08-20
P1242.08-22
P1242.08-24
P1242.08-26
P1242.08-28
P1242.08-30
P1242.08-32
P1242.08-35
P1242.08-40
P1242.08-45
P1242.08-50
P1242.08-55
P1242.08-60
P1242.08-65
P1242.08-70
P1242.08-75
P1242.08-80

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

16
18
20
22
24
26
28
30
32
35
40
45
50
55
60
65
70
75
80

11,5
13,5
15,5
17,5
19,5
21,5
23,5
25,5
27,5
30,5
35,5
40,5
45,5
50,5
55,5
58,9
63,9
68,9
73,9

14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
18
18
18
18

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3,2
3,2
3,2
3,2

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
4,5
4,5
4,5
4,5

Clevis Pins
DIN 1444 type B

P1242
d
h11

L1

G1

d1

L2

P1242.10-20
P1242.10-22
P1242.10-24
P1242.10-26
P1242.10-28
P1242.10-30
P1242.10-32
P1242.10-35
P1242.10-40
P1242.10-45
P1242.10-50
P1242.10-55
P1242.10-60
P1242.10-65
P1242.10-70
P1242.10-75
P1242.10-80
P1242.10-85
P1242.10-90
P1242.10-95
P1242.10-100

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

20
22
24
26
28
30
32
35
40
45
50
55
60
65
70
75
80
85
90
95
100

13,9
15,9
17,9
19,9
21,9
23,9
25,9
28,9
33,9
38,9
43,9
48,9
53,9
58,9
63,9
68,9
73,9
77,9
82,9
87,9
92,9

18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
20
20
20
20

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
5,5
5,5
5,5
5,5

P1242.12-24
P1242.12-26
P1242.12-28
P1242.12-30
P1242.12-32
P1242.12-35
P1242.12-40
P1242.12-45
P1242.12-50
P1242.12-55
P1242.12-60
P1242.12-65
P1242.12-70
P1242.12-75
P1242.12-80
P1242.12-85
P1242.12-90
P1242.12-95
P1242.12-100
P1242.12-120

12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12

24
26
28
30
32
35
40
45
50
55
60
65
70
75
80
85
90
95
100
120

16,9
18,9
20,9
22,9
24,9
27,9
32,9
37,9
42,9
47,9
52,9
57,9
62,9
67,9
72,9
77,9
82,9
87,9
92,9
97,9

20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20

3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5

Technical Notes
The nominal length is the total
length from under L1 head to the
end of the pin.
The grip length G1 is [L1 - L2 (Ad1)].
Diameter tolerance h11.
Length tolerances:up to 10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
For smaller sizes see previous page.
Tips
For use with cotter pins.
(P1240 or P1241) or retaining pins
(P1243).

PINS & WASHERS

Order No.

Material
Mild steel, zinc plated.
To ISO 2341 Form B,
DIN1444 type B.

Retaining Pins (R clips)

P1243
Material
Zinc plated, spring steel (1,7223) or
Stainless steel A2.
Technical Notes
Single and double coils (for more
demanding applications).
Sold in packs of 10.

PINS & WASHERS

Order No.

Material

Rec.
Hole Size

Type

Range of
shaft

P1243.015
P1243.020
P1243.022
P1243.025
P1243.035
P1243.045
P1243.060
P1243.070
P1243.080
P1243.090

Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel

1,5
2,0
2,2
2,5
3,5
4,5
6,0
7,0
8,0
9,0

Single
Single
Single
Single
Single
Single
Single
Single
Single
Single

1,2
1,6
1,8
2,0
3,0
4,0
5,0
6,0
7,0
8,0

3,5
5,0
7,5
10
18
20
24
30
30
28

22
22
32
50
60
60
85
105
105
110

5-8
7-12
8-13
9-14
10-16
16-20
20-28
28-40
28-45
30-45

P1243.125
P1243.135
P1243.145
P1243.155
P1243.165
P1243.180
P1243.190

Steel
Steel
Steel
Steel
Steel
Steel
Steel

2,5
3,5
4,5
5,5
6,5
8,0
9,0

Double
Double
Double
Double
Double
Double
Double

2,0
3,0
4,0
5,0
6,0
7,0
8,0

10
16
23
26
30
30
30

50
62
78
92
120
130
130

8-14
14-20
17-24
18-30
24-36
26-40
24-40

P1243.525
P1243.532
P1243.540
P1243.550
P1243.563
P1243.570
P1243.580

Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless

2,5
3,2
4,0
5,0
6,3
7,0
8,0

Double
Double
Double
Double
Double
Double
Double

2,25
2,8
3,6
4,5
5,6
6,3
7

42
48
64
80
97
125
150

Hammer Drive Pins

flat head

P1245
Material
Low carbon steel, cold formed.
Technical Notes
Used to replace screws where the
need to remove the pin is unlikely.
Installation by hammer or press.
Sold in packs of 10.
Tips
As the knurl has to cut it's way into
the walls of the hole, they are
desgned for use with unhardened
materials such as aluminium, brass
and plastics.
Important Notes
Simple, low cost assembly.
Do not require lock washers to
prevent back-out.

Order No.

Stud L
d1
size 0,25 min.

Head Thickn Thickn

d2
d1
Head
d2
ess ess

min.
min.
max. min max
max.
max.

Hole Hole Drill

min max size

PINS & WASHERS

P1245.F1.4-05
P1245.F1.4-06
P1245.F1.4-08

1,4
1,4
1,4

5
6
8

1,35
1,35
1,35

1,4
1,4
1,4

1,53 1,63
1,53 1,63
1,53 1,63

2,2
2,2
2,2

2,6
2,6
2,6

0,35 0,55 0,15

0,35 0,55 0,15
0,35 0,55 0,15

1
1
1

1,4
1,4
1,4

1,46
1,46
1,46

1,4
1,4
1,4

P1245.F1.6-05
P1245.F1.6-06
P1245.F1.6-08

1,6
1,6
1,6

5
6
8

1,55
1,55
1,55

1,6
1,6
1,6

1,73 1,83
1,73 1,83
1,73 1,83

2,6
2,6
2,6

3
3
3

0,45 0,65 0,15

0,45 0,65 0,15
0,45 0,65 0,15

1
1
1

1,6
1,6
1,6

1,66
1,66
1,66

1,6
1,6
1,6

P1245.F2-06
P1245.F2-08
P1245.F2-10

2
2
2

6
8
10

1,95
1,95
1,95

2
2
2

2,2
2,2
2,2

2,3
2,3
2,3

3,3
3,3
3,3

3,7
3,7
3,7

0,55 0,75 0,15

0,55 0,75 0,15
0,55 0,75 0,15

1
1
1

2
2
2

2,06
2,06
2,06

2
2
2

P1245.F2.,5-06
P1245.F2.5-08
P1245.F2.5-10

2,5
2,5
2,5

6
8
10

2,45
2,45
2,45

2,5
2,5
2,5

2,7
2,7
2,7

2,8
2,8
2,8

4,2
4,2
4,2

4,6
4,6
4,6

P1245.F3-08
P1245.F3-10
P1245.F3-12

3
3
3

8
10
12

2,95
2,95
2,95

3
3
3

P1245.F4-10
P1245.F4-12
P1245.F4-16

4
4
4

10
12
16

3,95
3,95
3,95

P1245.F5-12
P1245.F5-16
P1245.F5-20

5
5
5

12
16
20

P1245.F6-16
P1245.F6-20

6
6

16
20

0,7
0,7
0,7

0,9
0,9
0,9

0,15
0,15
0,15

1
1
1

2,5
2,5
2,5

2,56
2,56
2,56

2,5
2,5
2,5

3,25 3,35 4,95 5,45

3,25 3,35 4,95 5,45
3,25 3,35 4,95 5,45

0,9
0,9
0,9

1,2
1,2
1,2

0,15
0,15
0,15

1
1
1

3
3
3

3,06
3,06
3,06

3
3
3

4
4
4

4,25 4,35 6,75 7,25

4,25 4,35 6,75 7,25
4,25 4,35 6,75 7,25

1,2
1,2
1,2

1,5
1,5
1,5

0,4
0,4
0,4

2
2
2

4
4
4

4,08
4,08
4,08

4
4
4

4,95
4,95
4,95

5
5
5

5,25 5,35
5,25 5,35
5,25 5,35

1,5
1,5
1,5

1,8
1,8
1,8

0,4
0,4
0,4

2
2
2

5
5
5

5,08
5,08
5,08

5
5
5

5,95
5,95

6
6

6,25 6,35 10,2 10,8

6,25 6,35 10,2 10,8

1,9
1,9

2,2
2,2

0,4
0,4

2
2

6
6

6.08
6.08

6
6

8,5
8,5
8,5

9,1
9,1
9,1

Hammer Drive Pins

round head

P1245
Material
Low carbon steel, cold formed.

Hole Hole Drill

min max size

P1245.R1.4-05
P1245.R1.4-06
P1245.R1.4-08

1,4
1,4
1,4

5
6
8

1,35
1,35
1,35

1,4
1,4
1,4

1,53 1,63
1,53 1,63
1,53 1,63

2,2
2,2
2,2

2,6
2,6
2,6

0,7
0,7
0,7

0,9
0,9
0,9

0,15
0,15
0,15

1
1
1

1,4
1,4
1,4

1,46
1,46
1,46

1,4
1,4
1,4

P1245.R1.6-05
P1245.R1.6-06
P1245.R1.6-08

1,6
1,6
1,6

5
6
8

1,55
1,55
1,55

1,6
1,6
1,6

1,73 1,83
1,73 1,83
1,73 1,83

2,6
2,6
2,6

3
3
3

0,9
0,9
0,9

1,1
1,1
1,1

0,15
0,15
0,15

1
1
1

1,6
1,6
1,6

1,66
1,66
1,66

1,6
1,6
1,6

P1245.R2-06
P1245.R2-08
P1245.R2-10

2
2
2

6
8
10

1,95
1,95
1,95

2
2
2

2,2
2,2
2,2

2,3
2,3
2,3

3,3
3,3
3,3

3,7
3,7
3,7

1,1
1,1
1,1

1,3
1,3
1,3

0,15
0,15
0,15

1
1
1

2
2
2

2,06
2,06
2,06

2
2
2

P1245.R2.5-06
P1245.R2.5-08
P1245.R2.5-10

2,5
2,5
2,5

6
8
10

2,45
2,45
2,45

2,5
2,5
2,5

2,7
2,7
2,7

2,8
2,8
2,8

4,2
4,2
4,2

4,6
4,6
4,6

1,4
1,4
1,4

1,6
1,6
1,6

0,15
0,15
0,15

1
1
1

2,5
2,5
2,5

2,56
2,56
2,56

2,5
2,5
2,5

P1245.R3-08
P1245.R3-10
P1245.R3-12

3
3
3

8
10
12

2,95
2,95
2,95

3
3
3

3,25 3,35 4,95 5,45 1,65 1,95 0,15

3,25 3,35 4,95 5,45 1,65 1,95 0,15
3,25 3,35 4,95 5,45 1,65 1,95 0,15

1
1
1

3
3
3

3,06
3,06
3,06

3
3
3

P1245.R4-10
P1245.R4-12
P1245.R4-16

4
4
4

10
12
16

3,95
3,95
3,95

4
4
4

4,25 4,35 6,75 7,25 2,25 2,55

4,25 4,35 6,75 7,25 2,25 2,55
4,25 4,35 6,75 7,25 2,25 2,55

0,4
0,4
0,4

2
2
2

4
4
4

4,08
4,08
4,08

4
4
4

P1245.R5-12
P1245.R5-16
P1245.R5-20

5
5
5

12
16
20

4,95
4,95
4,95

5
5
5

5,25 5,35
5,25 5,35
5,25 5,35

2,85 3,15
2,85 3,15
2,85 3,15

0,4
0,4
0,4

2
2
2

5
5
5

5,08
5,08
5,08

5
5
5

P1245.R6-16
P1245.R6-20

6
6

16
20

5,95
5,95

6
6

6,25 6,35 10,2 10,8 3,45 3,75

6,25 6,35 10,2 10,8 3,45 3,75

0,4
0,4

2
2

6
6

6.08
6.08

6
6

8,5
8,5
8,5

9,1
9,1
9,1

Technical Notes
Used to replace screws where the
need to remove the pin is unlikely.
Installation by hammer or press.
Sold in packs of 10.
Tips
As the knurl has to cut it's way into
the walls of the hole, they are
desgned for use with unhardened
materials such as aluminium, brass
and plastics.
Important Notes
Simple, low cost assembly.
Do not require lock washers to
prevent back-out.

PINS & WASHERS

Order No.

Head Thickn Thickn

d2
d1
Head
d2
Stud L
d1
ess ess

min.
min.
size 0,25 min.
max. min max
max.
max.

Linch Pins

P1247
Pin
d

Pin
d1

Length
l

Shaft
A max.

P1247.045
P1247.060
P1247.070
P1247.080
P1247.090
P1247.100
P1247.110

4,5
6,0
7,0
8,0
9,0
10,0
11,0

4,5
6,0
6,0
7,0
7,5
8,0
9,0

42
42
42
42
42
42
42

30
38,5
38,5
38,5
38,5
38,5
38,5

Technical Notes
In pin sizes 4,5 and 6 there is no flat
on the pin so d is same as d1.

PINS & WASHERS

Order No.

Material
Mild steel, with spring steel clips.
Finish in zinc with yellow chromate
finish.

Shaft Locking Pins

P1248
Material
Mild steel, with spring steel clips.
Finish in zinc with yellow chromate
finish.
Order No.

Pin
A

Length
B

Shaft
C max.

P1248.041
P1248.042

4,5
4,5

32
40

28
36

P1248.061
P1248.062
P1248.063

6,0
6,0
6,0

32
40
45

28
36
40

P1248.081
P1248.082
P1248.083
P1248.084

8,0
8,0
8,0
8,0

40
45
50
60

36
40
45
50

P1248.101
P1248.102
P1248.103

10,0
10,0
10,0

40
50
60

36
45
55

P1248.111
P1248.112

11,0
11,0

45
55

40
50

PINS & WASHERS

Taper pins
DIN 1B

P1216
Material
Mild steel WS1,0718 (9SMnPB28K).
Ground finish.
Technical Notes
To DIN 1B.
The nominal diameter is always the
smaller end and the taper is 1:50
(2%).
Length tolerance to js15.
Sold in packs of 10.
Tips
For larger sizes please see
following pages.

PINS & WASHERS

Order No.

P1216-01.5-06
P1216-01.5-08
P1216-01.5-10
P1216-01.5-12
P1216-01.5-14
P1216-01.5-16
P1216-01.5-18
P1216-01.5-20
P1216-01.5-24
P1216-01.5-28
P1216-01.5-30

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

6
8
10
12
14
16
18
20
24
28
30

0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23
0,23

P1216.02-06
P1216.02-08
P1216.02-10
P1216.02-12
P1216.02-14
P1216.02-16
P1216.02-18
P1216.02-20
P1216.02-24
P1216.02-28
P1216.02-30
P1216.02-32
P1216.02-36
P1216.02-40
P1216.02-45
P1216.02-50

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

6
8
10
12
14
16
18
20
24
28
30
32
36
40
45
50

0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3

P1216.02.5-06
P1216.02.5-08
P1216.02.5-10
P1216.02.5-12
P1216.02.5-14
P1216.02.5-16
P1216.02.5-18
P1216.02.5-20
P1216.02.5-24
P1216.02.5-28
P1216.02.5-30
P1216.02.5-32
P1216.02.5-36
P1216.02.5-40
P1216.02.5-45
P1216.02.5-50

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

6
8
10
12
14
16
18
20
24
28
30
32
36
40
45
50

0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4

P1216.03-06
P1216.03-08
P1216.03-10
P1216.03-12
P1216.03-14
P1216.03-16
P1216.03-18
P1216.03-20

3
3
3
3
3
3
3
3

6
8
10
12
14
16
18
20

0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45

Taper pins
DIN 1B

P1216
d

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

24
28
30
32
36
40
45
50
55
60
65
70
80
90
100

0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45

P1216.04-06
P1216.04-08
P1216.04-10
P1216.04-12
P1216.04-14
P1216.04-16
P1216.04-18
P1216.04-20
P1216.04-24
P1216.04-28
P1216.04-30
P1216.04-32
P1216.04-36
P1216.04-40
P1216.04-45
P1216.04-50
P1216.04-55
P1216.04-60
P1216.04-65
P1216.04-70
P1216.04-80
P1216.04-90
P1216.04-100

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

6
8
10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
65
70
80
90
100

0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0.6
0.6
0.6

P1216.05-10
P1216.05-12
P1216.05-14
P1216.05-16
P1216.05-18
P1216.05-20

5
5
5
5
5
5

10
12
14
16
18
20

0,75
0,75
0,75
0,75
0,75
0,75

Technical Notes
To DIN 1B.
The nominal diameter is always the
smaller end and the taper is 1:50
(2%).
Length tolerance to js15.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.

PINS & WASHERS

Order No.
P1216.03-24
P1216.03-28
P1216.03-30
P1216.03-32
P1216.03-36
P1216.03-40
P1216.03-45
P1216.03-50
P1216.03-55
P1216.03-60
P1216.03-65
P1216.03-70
P1216.03-80
P1216.03-90
P1216.03-100

Material
Mild steel WS1,0718 (9SMnPB28K).
Ground finish.

Taper pins
DIN 1B

P1216
Material
Mild steel WS1,0718 (9SMnPB28K).
Ground finish.
Technical Notes
To DIN 1B.
The nominal diameter is always the
smaller end and the taper is 1:50
(2%).
Length tolerance to js15.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.

PINS & WASHERS

Order No.

P1216.05-24
P1216.05-28
P1216.05-30
P1216.05-32
P1216.05-36
P1216.05-40
P1216.05-45
P1216.05-50
P1216.05-55
P1216.05-60
P1216.05-65
P1216.05-70
P1216.05-80
P1216.05-90
P1216.05-100

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

24
28
30
32
36
40
45
50
55
60
65
70
80
90
100

0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75

P1216.06-10
P1216.06-12
P1216.06-14
P1216.06-16
P1216.06-18
P1216.06-20
P1216.06-24
P1216.06-28
P1216.06-30
P1216.06-32
P1216.06-36
P1216.06-40
P1216.06-45
P1216.06-50
P1216.06-55
P1216.06-60
P1216.06-65
P1216.06-70
P1216.06-80
P1216.06-90
P1216.06-100

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

10
12
14
16
18
20
24
28
30
32
36
40
45
50
55
60
65
70
80
90
100

0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9

P1216.08-20
P1216.08-24
P1216.08-28
P1216.08-30
P1216.08-32
P1216.08-36
P1216.08-40
P1216.08-45
P1216.08-50
P1216.08-55
P1216.08-60
P1216.08-65
P1216.08-70
P1216.08-80
P1216.08-90
P1216.08-100

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

20
24
28
30
32
36
40
45
50
55
60
65
70
80
90
100

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Taper pins
DIN 1B

P1216
d

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

28
30
32
36
40
45
50
55
60
65
70
80
90
100
110
120
130

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2

P1216.12-30
P1216.12-32
P1216.12-36
P1216.12-40
P1216.12-45
P1216.12-50
P1216.12-55
P1216.12-60
P1216.12-65
P1216.12-70
P1216.12-80
P1216.12-90
P1216.12-100
P1216.12-110
P1216.12-120
P1216.12-130

12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12

30
32
36
40
45
50
55
60
65
70
80
90
100
110
120
130

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

P1216.14-36
P1216.14-40
P1216.14-45
P1216.14-50
P1216.14-55
P1216.14-60
P1216.14-65
P1216.14-70
P1216.14-80
P1216.14-90
P1216.14-100
P1216.14-110
P1216.14-120
P1216.14-130
P1216.14-140
P1216.14-150

14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14

36
40
45
50
55
60
65
70
80
90
100
110
120
130
140
150

1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6

Technical Notes
To DIN 1B.
The nominal diameter is always the
smaller end and the taper is 1:50
(2%).
Length tolerance to js15.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages, for larger sizes
please see following pages.

PINS & WASHERS

Order No.
P1216.10-28
P1216.10-30
P1216.10-32
P1216.10-36
P1216.10-40
P1216.10-45
P1216.10-50
P1216.10-55
P1216.10-60
P1216.10-65
P1216.10-70
P1216.10-80
P1216.10-90
P1216.10-100
P1216.10-110
P1216.10-120
P1216.10-130

Material
Mild steel WS1,0718 (9SMnPB28K).
Ground finish.

Taper pins
DIN 1B

P1216
Material
Mild steel WS1,0718 (9SMnPB28K).
Ground finish.
Technical Notes
To DIN 1B.
The nominal diameter is always the
smaller end and the taper is 1:50
(2%).
Length tolerance to js15.
Sold in packs of 10.
Tips
For smaller sizes please see
previous pages.

PINS & WASHERS

Order No.

P1216.16-36
P1216.16-40
P1216.16-45
P1216.16-50
P1216.16-55
P1216.16-60
P1216.16-65
P1216.16-70
P1216.16-80
P1216.16-90
P1216.16-100
P1216.16-110
P1216.16-120
P1216.16-130
P1216.16-140
P1216.16-150

16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16

36
40
45
50
55
60
65
70
80
90
100
110
120
130
140
150

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

P1216.20-40
P1216.20-45
P1216.20-50
P1216.20-55
P1216.20-60
P1216.20-65
P1216.20-70
P1216.20-80
P1216.20-90
P1216.20-100
P1216.20-110
P1216.20-120
P1216.20-130
P1216.20-140
P1216.20-150

20
20
20
20
20
20
20
20
20
20
20
20
20
20
20

40
45
50
55
60
65
70
80
90
100
110
120
130
140
150

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

Taper pins - extractable

DIN 7978, ISO 8736

P1218
d

Thread

P1218.06-16
P1218.06-18
P1218.06-20
P1218.06-24
P1218.06-26
P1218.06-28
P1218.06-30
P1218.06-32
P1218.06-36
P1218.06-40
P1218.06-45
P1218.06-50
P1218.06-55
P1218.06-60
P1218.06-70
P1218.06-90

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

16
18
20
24
26
28
30
32
36
40
45
50
55
60
70
90

M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4

P1218.08-20
P1218.08-24
P1218.08-26
P1218.08-28
P1218.08-30
P1218.08-32
P1218.08-36
P1218.08-40
P1218.08-45
P1218.08-50
P1218.08-55
P1218.08-60
P1218.08-70
P1218.08-90
P1218.08-100
P1218.08-110
P1218.08-120

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

20
24
26
28
30
32
36
40
45
50
55
60
70
90
100
110
120

M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5

P1218.10-24
P1218.10-26
P1218.10-28
P1218.10-30
P1218.10-32
P1218.10-36
P1218.10-40
P1218.10-45
P1218.10-50
P1218.10-55
P1218.10-60
P1218.10-70
P1218.10-90
P1218.10-100
P1218.10-110
P1218.10-120

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

24
26
28
30
32
36
40
45
50
55
60
70
90
100
110
120

M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Technical Notes
To DIN 7978, ISO 8736.
The nominal diameter is always the
smaller end and the taper is 1:50
(2%).
Length tolerance to js 15.
Sold in packs of 10.

PINS & WASHERS

Order No.

Material
Mild steel WS1,0718 (9SMnPB28K).
Ground finish.

Taper pins - extractable

DIN 7978, ISO 8736

P1218
Material
Mild steel WS1,0718 (9SMnPB28K).
Ground finish.
Technical Notes
To DIN 7978, ISO 8736.
The nominal diameter is always the
smaller end and the taper is 1:50
(2%).
Length tolerance to js 15.
Sold in packs of 10.

PINS & WASHERS

Order No.

Thread

P1218.12-32
P1218.12-36
P1218.12-40
P1218.12-45
P1218.12-50
P1218.12-55
P1218.12-60
P1218.12-70
P1218.12-90
P1218.12-100
P1218.12-110
P1218.12-120

12
12
12
12
12
12
12
12
12
12
12
12

32
36
40
45
50
55
60
70
90
100
110
120

M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

P1218.14-40
P1218.14-45
P1218.14-50
P1218.14-55
P1218.14-60
P1218.14-70
P1218.14-90
P1218.14-100
P1218.14-110
P1218.14-120

14
14
14
14
14
14
14
14
14
14

40
45
50
55
60
70
90
100
110
120

M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

P1218.16-40
P1218.16-45
P1218.16-50
P1218.16-55
P1218.16-60
P1218.16-70
P1218.16-90
P1218.16-100
P1218.16-110
P1218.16-120

16
16
16
16
16
16
16
16
16
16

40
45
50
55
60
70
90
100
110
120

M10
M10
M10
M10
M10
M10
M10
M10
M10
M10

P1218.20-40
P1218.20-45
P1218.20-50
P1218.20-55
P1218.20-60
P1218.20-70
P1218.20-90
P1218.20-100
P1218.20-110
P1218.20-120

20
20
20
20
20
20
20
20
20
20

40
45
50
55
60
70
90
100
110
120

M12
M12
M12
M12
M12
M12
M12
M12
M12
M12

Slotted pins - carbon steel

ISO 8752

P1230
D

Exp. dia.
min.

Exp. dia.
max.

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1230.01-04
P1230.01-05
P1230.01-06
P1230.01-08
P1230.01-10
P1230.01-12
P1230.01-14
P1230.01-16
P1230.01-18
P1230.01-20

1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0

4
5
6
8
10
12
14
16
18
20

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2

1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3

1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0

1,10
1,10
1,10
1,10
1,10
1,10
1,10
1,10
1,10
1,10

0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2

0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7

P1230.01,5-04
P1230.01,5-06
P1230.01,5-08
P1230.01,5-10
P1230.01,5-12
P1230.01,5-14
P1230.01,5-16
P1230.01,5-18
P1230.01,5-20
P1230.01,5-22
P1230.01,5-24
P1230.01,5-26
P1230.01,5-28
P1230.01,5-30

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

4
6
8
10
12
14
16
18
20
22
24
26
28
30

1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7

1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60

0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3

1,58
1,58
1,58
1,58
1,58
1,58
1,58
1,58
1,58
1,58
1,58
1,58
1,58
1,58

P1230.02-04
P1230.02-06
P1230.02-08
P1230.02-10
P1230.02-12
P1230.02-14
P1230.02-16
P1230.02-18
P1230.02-20
P1230.02-22
P1230.02-24
P1230.02-26
P1230.02-28
P1230.02-30
P1230.02-35
P1230.02-40

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

4
5
8
10
12
14
16
18
20
22
24
26
28
30
35
40

2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3

2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10

0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4

2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82
2,82

Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole. The ends of the pin have a
bevelled chamfer. they are designed
for plain drilled holes, but a
countersink makes assembly easier,
especially for the ISO 8752 type.
Slotted pins are normally supplied in
the heavy duty form to ISO 8752, but
a light duty version can be supplied
to ISO 13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For larger sizes, see following
pages.
Tips
Where pins are to be installed in
plastic it is recommended that they
are de-oiled before use to avoid
embrittlement of the plastic.

PINS & WASHERS

Order No.

Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.

Slotted pins - carbon steel

ISO 8752

P1230
Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.
Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75

PINS & WASHERS

Sold in packs of 10.

Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.
For larger sizes, see following
pages.

Order No.

Exp.dia.
min.

Exp.dia.
max.

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1230.02,5-04
P1230.02,5-05
P1230.02,5-06
P1230.02,5-08
P1230.02,5-10
P1230.02,5-12
P1230.02,5-14
P1230.02,5-16
P1230.02,5-18
P1230.02,5-20
P1230.02,5-22
P1230.02,5-24
P1230.02,5-26
P1230.02,5-28
P1230.02,5-30
P1230.02,5-35
P1230.02,5-40

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
35
40

2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8

2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60

0,5
0,5
0,5
2,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5

4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38
4,38

P1230.03-04
P1230.03-05
P1230.03-06
P1230.03-08
P1230.03-10
P1230.03-12
P1230.03-13
P1230.03-16
P1230.03-18
P1230.03-20
P1230.03-22
P1230.03-24
P1230.03-26
P1230.03-28
P1230.03-30
P1230.03-35
P1230.03-40
P1230.03-45

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
35
40
45

3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10

0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6

6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32
6,32

P1230.03,5-04
P1230.03,5-05
P1230.03,5-06
P1230.03,5-08
P1230.03,5-10
P1230.03,5-12
P1230.03,5-14
P1230.03,5-16
P1230.03,5-18
P1230.03,5-20

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

4
5
6
8
10
12
14
16
18
20

3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62

0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7

9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06

Slotted pins - carbon steel

ISO 8752

P1230
D

Exp. dia.
min.

Exp. dia.
max

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1230.03,5-22
P1230.03,5-24
P1230.03,5-26
P1230.03,5-28
P1230.03,5-30
P1230.03,5-35
P1230.03,5-40
P1230.03,5-45
P1230.03,5-50

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

22
24
26
28
30
35
40
45
50

3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62

0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7

9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06

P1230.04-04
P1230.04-05
P1230.04-06
P1230.04-08
P1230.04-10
P1230.04-12
P1230.04-14
P1230.04-16
P1230.04-18
P1230.04-20
P1230.04-22
P1230.04-24
P1230.04-26
P1230.04-28
P1230.04-30
P1230.04-35
P1230.04-40
P1230.04-45
P1230.04-50
P1230.04-55
P1230.04-60

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60

4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4

4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12

0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8

11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24

P1230.05-06
P1230.05-08
P1230.05-10
P1230.05-12
P1230.05-14
P1230.05-16
P1230.05-18
P1230.05-20

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

6
8
10
12
14
16
18
20

5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4

5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12

1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0

17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54

Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.
For larger sizes, see following
pages.

PINS & WASHERS

Order No.

Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.

Slotted pins - carbon steel

ISO 8752

P1230
Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.
Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75

PINS & WASHERS

Sold in packs of 10.

Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.
For larger sizes, see following
pages.

Order No.

Exp. dia.
min.

Exp.dia.
max.

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1230.05-22
P1230.05-24
P1230.05-26
P1230.05-28
P1230.05-30
P1230.05-35
P1230.05-40
P1230.05-45
P1230.05-50
P1230.05-55
P1230.05-60
P1230.05-65
P1230.05-70
P1230.05-75
P1230.05-80

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

22
24
26
28
30
35
40
45
50
55
60
65
70
75
80

5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4

5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12

1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0

17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54

P1230.06-08
P1230.06-10
P1230.06-12
P1230.06-14
P1230.06-16
P1230.06-18
P1230.06-20
P1230.06-22
P1230.06-24
P1230.06-26
P1230.06-28
P1230.06-30
P1230.06-35
P1230.06-40
P1230.06-45
P1230.06-50
P1230.06-55
P1230.06-60
P1230.06-65
P1230.06-70
P1230.06-75
P1230.06-80
P1230.06-85
P1230.06-90
P1230.06-95
P1230.06-100

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

8
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100

6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4

6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
6,0

26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04
26,04

Slotted pins - carbon steel

ISO 8752

P1230
D

Exp. diam.
min.

Exp. diam.
max.

Hole size
min.

Hole size
max.

Material
Thckness

Double
Shear
Strength KN

P1230.08-08
P1230.08-10
P1230.08-12
P1230.08-14
P1230.08-16
P1230.08-18
P1230.08-20
P1230.08-22
P1230.08-24
P1230.08-26
P1230.08-28
P1230.08-30
P1230.08-35
P1230.08-40
P1230.08-45
P1230.08-50
P1230.08-55
P1230.08-60
P1230.08-65
P1230.08-70
P1230.08-75
P1230.08-80
P1230.08-85
P1230.08-90
P1230.08-95
P1230.08-100
P1230.08-120

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

8
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
120

8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5

8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76
42,76

1230.10-10
1230.10-12
1230.10-14
1230.10-16
1230.10-18
1230.10-20
1230.10-22
1230.10-24
1230.10-26
1230.10-28
1230.10-30
1230.10-35
1230.10-40
1230.10-45
1230.10-50
1230.10-55
1230.10-60
1230.10-65
1230.10-70

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70

10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5

10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16

Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.
For larger sizes, see following
pages.

PINS & WASHERS

Order No.

Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.

Slotted pins - carbon steel

ISO 8752

P1230
Material
Carbon steel CS70 hardened and
tempered to HV420-545, equivalent
to DIN 17222 C67 or AISI 1070.
Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75

PINS & WASHERS

Sold in packs of 10.

Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.

Order No.

Exp. diam.
min.

Exp. diam.
max.

Hole size
min.

Hole size
max.

Material
Thckness

Double
Shear
Strength KN

1230.10-75
1230.10-80
1230.10-85
1230.10-90
1230.10-95
1230.10-100
1230.10-120
1230.10-130
1230.10-140
1230.10-150
1230.10-160

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

75
80
85
90
95
100
120
130
140
150
160

10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5

10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16
70,16

1230.12-10
1230.12-12
1230.12-14
1230.12-16
1230.12-18
1230.12-20
1230.12-22
1230.12-24
1230.12-26
1230.12-28
1230.12-30
1230.12-35
1230.12-40
1230.12-45
1230.12-50
1230.12-55
1230.12-60
1230.12-65
1230.12-70
1230.12-75
1230.12-80
1230.12-85
1230.12-90
1230.12-95
1230.12-100
1230.12-120
1230.12-130
1230.12-140
1230.12-150
1230.12-160

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
120
130
140
150
160

12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5

12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8
12,8

12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0

12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17
12,17

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1
104,1

Slotted Spring Pins - stainless steel

ISO 8752

P1231
D

Exp. dia.
min.

Exp. dia.
max.

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1231.1,0-004
P1231.1,0-005
P1231.1,0-006
P1231.1,0-008
P1231.1,0-010
P1231.1,0-012
P1231.1,0-014
P1231.1,0-016
P1231.1,0-018
P1231.1,0-020

1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0

4
5
6
8
10
12
14
16
18
20

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2

1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3

1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0

1,10
1,10
1,10
1,10
1,10
1,10
1,10
1,10
1,10
1,10

0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2

0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4

P1231.1,5-004
P1231.1,5-005
P1231.1,5-006
P1231.1,5-008
P1231.1,5-010
P1231.1,5-012
P1231.1,5-014
P1231.1,5-016
P1231.1,5-018
P1231.1,5-020
P1231.1,5-022
P1231.1,5-024
P1231.1,5-026
P1231.1,5-028
P1231.1,5-030

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30

1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7

1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60
1,60

0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3

0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98
0,98

P1231.2,0-004
P1231.2,0-005
P1231.2,0-006
P1231.2,0-008
P1231.2,0-010
P1231.2,0-012
P1231.2,0-014
P1231.2,0-016
P1231.2,0-018
P1231.2,0-020
P1231.2,0-022
P1231.2,0-024
P1231.2,0-026
P1231.2,0-028
P1231.2,0-030
P1231.2,0-035
P1231.2,0-040

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
35
40

2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3

2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10
2,10

0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4

1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81
1,81

Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For larger sizes, see following
pages.
Tips
Where pins are to be installed in
plastic it is recommended that they
are de-oiled before use to avoid
embrittlement of the plastic.

PINS & WASHERS

Order No.

Material
Stainless steel AISI 304 S31
equivalent to ISO A2.

Slotted Spring Pins - stainless steel

ISO 8752

P1231
Material
Stainless steel AISI 304 S31
equivalent to ISO A2.
Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75

PINS & WASHERS

Sold in packs of 10.

The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.
For larger sizes, see following
pages.

Order No.

Exp. dia.
min.

Exp. dia.
max

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1231.2,5-004
P1231.2,5-005
P1231.2,5-006
P1231.2,5-008
P1231.2,5-010
P1231.2,5-012
P1231.2,5-014
P1231.2,5-016
P1231.2,5-018
P1231.2,5-020
P1231.2,5-022
P1231.2,5-024
P1231.2,5-026
P1231.2,5-028
P1231.2,5-030
P1231.2,5-035
P1231.2,5-040

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
35
40

2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8

2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9
2,9

2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5

2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60
2,60

0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5

2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84
2,84

P1231.3,0-004
P1231.3,0-005
P1231.3,0-006
P1231.3,0-008
P1231.3,0-010
P1231.3,0-012
P1231.3,0-014
P1231.3,0-016
P1231.3,0-018
P1231.3,0-020
P1231.3,0-022
P1231.3,0-024
P1231.3,0-026
P1231.3,0-028
P1231.3,0-030
P1231.3,0-035
P1231.3,0-040
P1231.3,0-045
P1231.3,0-050

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50

3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0

3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10
3,10

0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6

4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07
4,07

P1231.3,5-004
P1231.3,5-005
P1231.3,5-006
P1231.3,5-008
P1231.3,5-010
P1231.3,5-012
P1231.3,5-014
P1231.3,5-016

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

4
5
6
8
10
12
14
16

3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62

0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7

5,80
5,80
5,80
5,80
5,80
5,80
5,80
5,80

Slotted Spring Pins - stainless steel

ISO 8752

P1231
D

Exp. dia.
min.

Exp. dia.
max.

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1231.3,5-018
P1231.3,5-020
P1231.3,5-022
P1231.3,5-024
P1231.3,5-026
P1231.3,5-028
P1231.3,5-030
P1231.3,5-035
P1231.3,5-040
P1231.3,5-045
P1231.3,5-050

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

18
20
22
24
26
28
30
35
40
45
50

3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8
3,8

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5

3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62
3,62

9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06
9,06

5,80
5,80
5,80
5,80
5,80
5,80
5,80
5,80
5,80
5,80
5,80

P1231.4,0-004
P1231.4,0-005
P1231.4,0-006
P1231.4,0-008
P1231.4,0-010
P1231.4,0-012
P1231.4,0-014
P1231.4,0-016
P1231.4,0-018
P1231.4,0-020
P1231.4,0-022
P1231.4,0-024
P1231.4,0-026
P1231.4,0-028
P1231.4,0-030
P1231.4,0-035
P1231.4,0-040
P1231.4,0-045
P1231.4,0-050
P1231.4,0-055
P1231.4,0-060

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60

4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4
4,4

4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6
4,6

4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0

4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12
4,12

11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24
11,24

7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25
7,25

P1231.5,0-006
P1231.5,0-008
P1231.5,0-010
P1231.5,0-012
P1231.5,0-014
P1231.5,0-016
P1231.5,0-018
P1231.5,0-020
P1231.5,0-022
P1231.5,0-024
P1231.5,0-026
P1231.5,0-028

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

6
8
10
12
14
16
18
20
22
24
26
28

5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4

5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12

17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54
17,54

10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75

Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.
For larger sizes, see following
pages.

PINS & WASHERS

Order No.

Material
Stainless steel AISI 304 S31
equivalent to ISO A2.

Slotted Spring Pins - stainless steel

ISO 8752

P1231
Material
Stainless steel AISI 304 S31
equivalent to ISO A2.
Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75

PINS & WASHERS

Sold in packs of 10.

The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.
For larger sizes, see following
pages.

Order No.

Exp. dia.
min.

Exp. dia.
max.

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1231.5,0-030
P1231.5,0-035
P1231.5,0-040
P1231.5,0-045
P1231.5,0-050
P1231.5,0-055
P1231.5,0-060
P1231.5,0-065
P1231.5,0-070
P1231.5,0-075
P1231.5,0-080

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

30
35
40
45
50
55
60
65
70
75
80

5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4
5,4

5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6

5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0

5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12
5,12

1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0

10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75
10,75

P1231.6,0-008
P1231.6,0-010
P1231.6,0-012
P1231.6,0-014
P1231.6,0-016
P1231.6,0-018
P1231.6,0-020
P1231.6,0-022
P1231.6,0-024
P1231.6,0-026
P1231.6,0-028
P1231.6,0-030
P1231.6,0-035
P1231.6,0-040
P1231.6,0-045
P1231.6,0-050
P1231.6,0-055
P1231.6,0-060
P1231.6,0-065
P1231.6,0-070
P1231.6,0-075
P1231.6,0-080
P1231.6,0-085
P1231.6,0-090
P1231.6,0-095
P1231.6,0-100

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

8
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100

6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4

6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7
6,7

6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0
6,0

6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12
6,12

1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2

16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17
16,17

P1231.8,0-008
P1231.8,0-010
P1231.8,0-012
P1231.8,0-014
P1231.8,0-016
P1231.8,0-018
P1231.8,0-020

8,0
8,0
8,0
8,0
8,0
8,0
8,0

8
10
12
14
16
18
20

8,5
8,5
8,5
8,5
8,5
8,5
8,5

8,8
8,8
8,8
8,8
8,8
8,8
8,8

8,0
8,0
8,0
8,0
8,0
8,0
8,0

8,15
8,15
8,15
8,15
8,15
8,15
8,15

1,5
1,5
1,5
1,5
1,5
1,5
1,5

26,46
26,46
26,46
26,46
26,46
26,46
26,46

Slotted Spring Pins - stainless steel

ISO 8752

P1231
D

Exp. dia.
min.

Exp. dia.
max.

Hole size
min.

Hole size
max.

Material
Thickness

Double
Shear
Strength kN

P1231.8,0-022
P1231.8,0-024
P1231.8,0-026
P1231.8,0-028
P1231.8,0-030
P1231.8,0-035
P1231.8,0-040
P1231.8,0-045
P1231.8,0-050
P1231.8,0-055
P1231.8,0-060
P1231.8,0-065
P1231.8,0-070
P1231.8,0-075
P1231.8,0-080
P1231.8,0-085
P1231.8,0-090
P1231.8,0-095
P1231.8,0-100
P1231.8,0-120

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
120

8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5

8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8
8,8

8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0

8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15
8,15

1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46
26,46

P1231.10,0-010
P1231.10,0-012
P1231.10,0-014
P1231.10,0-016
P1231.10,0-018
P1231.10,0-020
P1231.10,0-022
P1231.10,0-024
P1231.10,0-026
P1231.10,0-028
P1231.10,0-030
P1231.10,0-035
P1231.10,0-040
P1231.10,0-045
P1231.10,0-050
P1231.10,0-055
P1231.10,0-060
P1231.10,0-065
P1231.10,0-070
P1231.10,0-075
P1231.10,0-080
P1231.10,0-085
P1231.10,0-090
P1231.10,0-095
P1231.10,0-100
P1231.10,0-120
P1231.10,0-130
P1231.10,0-140
P1231.10,0-150
P1231.10,0-160

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
120
130
140
150
160

10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5

10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8
10,8

10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0

10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15
10,15

2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0

42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14
42,14

Technical Notes
To ISO 8752.Slotted springs consist
of a single coil of spring steel with
an open slot sufficiently wide
enough to enable the pin to reduce
in diameter as it is driven into the
hole.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
The ends of the pin have a bevelled
chamfer. they are designed for plain
drilled holes, but a countersink
makes assembly easier, especially
for the ISO 8752 type. Slotted pins
are normally supplied in the heavy
duty form to ISO 8752, but a light
duty version can be supplied to ISO
13337.
Length tolerances:1-10mm long - 0,25
12-50mm long - 0,50
over 50mm long - 0,75
Sold in packs of 10.
Pins with a nominal diameter of
10mm or greater may be delivered
with one chamfer.
For smaller sizes, see previous
pages.

PINS & WASHERS

Order No.

Material
Stainless steel AISI 304 S31
equivalent to ISO A2.