Republic of the Philippines

Department of Education
REGION IV-A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
Purok 3, Barangay Gulod, Cabuyao City, Laguna

FOURTH PERIODICAL TEST TLE 7

CARPENTRY EXPLORATORY
S.Y. 2023-2024
Multiple Choice.
Direction: Read each item carefully and choose the letter that corresponds to the correct
answer. Write your answer in the space provided before each number.

1. What do you call to objects used as parts or components of projects?

A. equipment
B. hardware
C. materials
D. tools
2. What do you call to implements manipulated by the hand to facilitate carpentry
works??
A. equipment
B. hardware
C. materials
D. tools
3. Ranie is repairing their water pipe. How can he cut the pipe?
A. By using a claw hammer.
B. By using a crosscut saw.
C. By using a hacksaw.
D. By using a ripsaw.
4. Which of the following statement describes the difference between the crosscut saw
and ripsaw?
A. Crosscut saw is used to cut a wood across the grain while ripsaw is used to cut
along the grain.
B. Crosscut saw is used to cut a wood along the grain while ripsaw is used to cut
across
the grain.
C. Crosscut saw is used cutting pipe while ripsaw is used in cutting metals.
D. Crosscut saw and ripsaw can be both used in cutting pipe and metals.
5. Which of the following is the first step in accomplishing requisition form?
A. Enumerate the materials with their description.
B. Fill in the classification of the projects and its purpose.
C. State the name of the projects and the date when you requested for materials.
D. Write the number of required materials.
6. Which of the following is the last step in accomplishing requisition form?
A. Enumerate the materials with their description.
B. State the name of the projects and the date when you requested for materials.
C. Write your name as requisitioner.
D. Secure the approval of authorities concerned.
7. Which of the following is NOT a proper way of acquiring and inspecting materials and
tools?
A. Check if the materials and tools are complete in terms of quantity and
specification.
B. Check the physical condition of the tools.
C. Check the accessories of each materials and tools.
D. Get a replacement of tools or materials even if it not defective.
8. Lary is examining the state of the supplier's delivered tools. He discovered that the
hacksaw's blade had a crack in it. How ought Lary to proceed?
A. Get a replacement from the supplier.
B. Repair the hacksaw.
C. Sell it in a discounted price.
D. Throw the hacksaw.
9. What type of tools is used in measuring things like distances and angles?
 Republic of the Philippines
Department of Education
REGION IV-A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
Purok 3, Barangay Gulod, Cabuyao City, Laguna

A. Boring tools
B. Holding tools
C. Marking tools
D. Measuring tools
10. What type of tools are try square, steel square, spirit level, and plumb bob?
A. Edge cutting tools
B. Driving tools
C. Testing tools
D. Tooth-cutting tools
11. Peter wants to obtain a smooth and flat surface for his project. Which of the following
edge cutting tool will you recommend to him?
A. Tell him to use cabinet scraper.
B. Tell him to use chisel.
C. Tell him to use plane.
D. Tell him to use spoke shave.
12. Which is the correct arrangement of tools following the format; marking tool- boring
tool- testing tool?
A. Pull-push rule- Ruler- meter stick
B. Crosscut saw- Try square- Chisel
C. Pencil- Plumb bob- Drill bit
D. Chalk line- Auger bit – Spirit level
13. What do you think will happen if you use ripsaw rather than using turning saw to cut
curves in the lumber?
A. It is fine because they are both saw.
B. It may damage both tool and lumber
C. It will not affect the outcome as long as you know how to use it.
D. It will create a unique output.
14. How would you classify the following tools; Chisel - Ruler- Pencil- Bench-vise?
A. boring- holding- edge cutting- marking
B. edge cutting – measuring- marking- holding
C. holding- edge cutting- measuring- marking
D. marking- measuring- edge cutting- holding
15. What is the first step in lubricating tools and equipment?
A. Apply thin coat of oil on the parts for a long period of time.
B. Determine the type of tools and machine needed to be lubricated.
C. Read and analyze the use of preventive maintenance schedule form.
D. Open the bearing cover and apply grease.
16. What is the last step in lubricating tools and equipment?
A. Apply thin coat of oil on the parts for a long period of time.
B. Apply grease on sealed bearing with the use of a grease gun.
C. Fill out a requisition form correctly intended for the needed tools
D. Secure a borrower’s slip from your teacher.
17. Which of the following is the proper way replacing defective parts?
A. Use the repair manual in replacing defective parts.
B. Use your skills and talent in replacing defective parts.
C. Use your instinct.
D. Use all your knowledge and wisdom to replace defective parts.
18. How should you determine the defective instruments when filling out inspection
report form?
A. Based on gut feeling.
B. Based on the reports from the workers.
C. Based on your friend’s advice.
D. Based on your instinct.
19. Which of the following tools is NOT a measuring tool?
A. Pull-push rule
B. Ruler
C. Chisel
D. Zig zag rule
 Republic of the Philippines
Department of Education
REGION IV-A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
Purok 3, Barangay Gulod, Cabuyao City, Laguna

20. The carpenter wants to check the flatness and squareness of the table. Which tool
should he use?
A. Caliper
B. Meter stick
C. Try square
D. Zigzag rule
21. What tool is used for scribing arcs and circles?
A. Compass
B. Divider
C. Meter stick
D. Ruler
22. What tool is used for measuring diameter?
A. Caliper
B. Compass
C. Divider
D. Protractor
23. If 1 foot is equivalent to 12 inches, what is the size of the wood in inches if it is 3 feet
long?
A. 24 inches
B. 30 inches
C. 36 inches
D. 42 inches
24. How many feet are there in 48 inches?
A. 3 feet
B. 4 feet
C. 5 feet
D. 6 feet
25. What is 11/3 in decimal?
A. 3.66
B. 3.69
C. 3.71
D. 3.73
26. Lumber has 6 faces. Which of the following is correct?
A. end1, end2, edge1, edge 2, surface1, surface2.
B. corner1, corner2, side 1, side2, surface 1, surface2.
C. right1, right 2, left1, left2, end1, end2.
D. side1, side 2, top1, top2, bottom1, bottom2
27. Which of the following is NOT a measurement obtained through 6 faces of the
lumber?
A. diameter
B. height
C. length
D. width
28. What measurement is obtained when you measure the lumber from end1 to end 2?
A. diameter
B. height
C. length
D. width
29. What is the board feet of the lumber if it is 2” thick, 4” width, and 12” long? Compute
using the formula:
A. 6 Bd.Ft
B. 8 Bd.Ft
C. 10 Bd.Ft
D. 12 Bd.Ft
 Republic of the Philippines
Department of Education
REGION IV-A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
Purok 3, Barangay Gulod, Cabuyao City, Laguna

30. What is the Board feet of the lumber whose measurement is; T= 4inches, W=6inches,
L= 10inches?
A. 10 Bd.Ft
B. 15 Bd.Ft
C. 20 Bd.Ft
D. 25 Bd.Ft
31. What is a heavy and solid line used to frame a drawing?
A. Borderline
B. Centerline
C. Dimension line
D. Invisible line
32. What do you call to a light line used as axis of symmetry and is used for center of
circles and arcs?
A. Borderline
B. Centerline
C. Dimension line
D. Invisible line
33. Which of the following is NOT a component of center table?
A. Bottom
B. Legs
C. Rails
D. Top
34. What are the specified joints used in joining legs and rails of the center table?
A. Dado joint
B. Dove tail
C. Lap joint
D. Mortise and tendon joint
35. Neil intends to construct a central table. How should he get the table's legs ready?
A. Cut a 2 pieces of woods in equal sizes.
B. Cut a 4 pieces of woods in equal sizes.
C. Cut 2 pieces of wood in same size, then cut another 2 pieces of wood an inch
longer.
D. Cut 4 pieces of woods in different sizes.
36. Neil asks, "How can I tell if the woods are the same size?" What will you suggest?
A. Use a measuring tool with the same unit of measurement.
B. Use a measuring tool with different unit of measurement.
C. Estimate the size of the woods.
D. Compare the sizes of the woods.
37. What do you call to this axis ( | ) which is also the first step in drawing an isometric
box?
A. line axis
B. horizontal axis
C. straight axis
C. vertical axis
38. What drawing represent an object in three dimensional and is also called as pictorial
drawing?
A. isometric drawing
B. orthographic drawing
C. sketching
D. technical drawing
39. What drawing represent an object in two dimensional and is also called as plan view?
A. isometric drawing
B. orthographic drawing
C. sketching
D. technical drawing
40. What do you call to this type of illustration?
A. isometric drawing
 Republic of the Philippines
Department of Education
REGION IV-A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
Purok 3, Barangay Gulod, Cabuyao City, Laguna

B. orthographic drawing
C. sketching
D. technical drawing
41. Which of the following ensures the safety of the construction workers?
A. danger sign
B. exit sign
C. safety instructions signs
D. signs, signal and barricades
42. Which shall be used when an immediate hazard exist?
A. danger sign
B. exit sign
C. safety instructions signs
D. signs, signal and barricades
43. Which shall be used as temporary means of warning an existing hazard such as
defected tools and equipment?
A. accidental prevention tags
B. danger sign
C. directional sign
D. traffic sign
44. What does OHS means?
A. Occupied Home Security
B. Occupation of Healthy Seniors
C. Occupational Healthy Safety
D. Occupational Health and Safety
45. Edgar was instructed to weld the broken leg of the table. What PPE would you suggest
to him to protect his face from flying particles or debris?
A. Suggest him to wear ear plugs.
B. Suggest him to wear goggles and face protection.
C. Suggest him to wear respirators.
D. Suggest him to wear safety shoes.
46. Manny is working in a construction site, but he has an open wound on his feet. What
would you recommend to him?
A. Tell him to cover his wound and wear safety shoes.
B. Tell him to put band aid to the open wound.
C. Tell him to wear sandals.
D. Tell him to wear rubber shoes.
47. What should Ana do if she wishes to do the "Seiso/Sweep" at her place of
employment?
A. Clean the workplace.
B. Do things spontaneously without being told or ordered.
C. Maintain high standard of housekeeping.
D. Take out unnecessary items and dispose.
48. One of the Japanese 5s in an ideal workstation is Seiri, also known as Sort. How can
Lala demonstrate this practice?
A. Arrange necessary items in good order for use.
B. Clean the workplace before and after her duty.
C. Take out unnecessary items and dispose.
D. Throw all the scratch papers.
49. The 2nd S in Japanese 5s is Seiton, also known as Systematize. How can Angie
demonstrate this practice?
A. By arranging the necessary items in good order for use.
B. By letting the utility clean her workplace.
C. By practicing the “as is, where it is”
D. By practicing the CLAYGO (Clean as you go)
50. Which of the following does NOT show a good practice of Seiri/Sort?
A. Keep all the documents in place and do not throw anything even if it is
unnecessary.
B. Move the items to other department/section where the item is needed.
 Republic of the Philippines
Department of Education
REGION IV-A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
Purok 3, Barangay Gulod, Cabuyao City, Laguna

C. Never keep anything which is unnecessary to your workplace.

D. Put disposal notice to items before disposing it.

Prepared by: Checked by:

AIRA CHARIZ GAIL A. TAGUD ALLAN B. ESCALANTE

Teacher I Master Teacher I

ANSWER KEY- TLE 7

1. C 11. C 21. A 31. A 41. D

2. D 12. D 22. A 32. B 42. A
3. C 13. B 23. C 33. A 43. A
4. A 14. B 24. B 34. D 44. D
5. C 15. C 25. A 35. B 45. B
6. D 16. B 26. A 36. A 46. A
7. D 17. A 27. A 37. C 47. A
8. A 18. B 28. C 38. A 48. C
9. D 19. C 29. B 39. B 49. A
10.C 20. C 30. C 40. B 50. A
 Republic of the Philippines
Department of Education
REGION IV-A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
Purok 3, Barangay Gulod, Cabuyao City, Laguna

Republic of the Philippines

Department of Education
REGION IV – A CALABARZON
CITY SCHOOLS DIVISION OF CABUYAO
GULOD NATIONAL HIGH SCHOOL
PUROK III, BRGY. GULOD, CITY OF CABUYAO, LAGUNA
TABLE OF SPECIFICATION

NUMBER OF DAYS
FOURTH PERIODICAL TEST
TLE 7- CARPENTRY EXPLORATORY

NO. OF ITEMS

PERCENTAGE
UNDERSTANDI
REMEMBERIN
ITEM PLACEMENT

EVALUATING
TAUGHT

ANALYZING

CREATING
APPLYING
MOST ESSENTIAL LEARNING
TOPIC
COMPETENCIES

NG
G

60% 30% 10%

Types and
uses of 1,2 3 4 4 8.00%
construction
Identify materials and tools for materials
a task (TLE_IACP7/ 8UT-0a-1) and tools 2

Request appropriate materials

and tools (TLE_IACP7/ 8UT-0b- 5,6 2 4.00%
2) Requisition
procedure 1

Acquire and
inspect 7 8 2 4.00%
Receive and inspect materials materials
(TLE_IACP7/ 8UT-0b-3) and tools 1

Classificatio
n of hand 3 9 10 11 12 13,14 6 12.00%
Check condition of tools and
tools
equipment (TLE_IACP7/ 8MT-
0c-1)

Lubricating
Perform basic preventive tools and 2 15,16 17 18 4 8.00%
maintenance equipment
(TLE_IACP7/ 8MT-0c-2)
Types of 19,
measuring 2 21, 20 4 8.00%
Select measuring instruments
instrument 22
(TLE_IACP7/ 8MC-0d-1)
Carry out measurements and System of 23,
26,27
calculations (TLE_IACP7/ 8MC- measuremen 4 24,2 29,30 8 16.00%
,28
0d-e2) t 5

Drawing
31,
signs and 1 2 4.00%
Analyze signs, symbols and 32
symbols
data (TLE_IACP7/ 8ID-0f-1)

Interpret technical drawings Center table

2 33 34 36 35 4 8.00%
and plans (TLE_IACP7/ 8ID-0f- component
2)
Isometric 37,3
and 8,
2 4 8.00%
Apply freehand sketching Orthographic 39,
(TLE_IACP7/ 8ID-0g-h-3) drawing 40
Hzards and
41,
risk
42,
identificatio 2 4 8.00%
Identify hazards and risks 43,
n and
(TLE_IACP7/ 8ID-0i-1) 44
control
Personal
Protective
1 45,46 2 4.00%
Control hazards and risks Equipment
(TLE_IACP7/ 8ID-0i-2) (PPE)
J apanese 5s
and their 47,48
Maintain occupational health 2 50 4 8.00%
English ,49
and safety awareness
equivalent
(TLE_IACP7/ 8ID-0j-3)
14 16 10 5 3 2
TOTAL 25 50 100%
30 15 5