Republic of the Philippines
National Capital Region
Department of Education
Division of Taguig City and Pateros
Cluster VI
50
KAPT. JOSE CARDONES INTEGRATED SCHOOL
LONG TEST IN T.L.E. 8
CARPENTRY: CABINET MAKING
Name: _________________________________________ Grade & Section:
______________ Teacher: _______________________________________ Date:
__________________
I. Multiple Choice: For each question, select the best answer from the choices provided. Write the letter
of the correct answer on your answer sheet.
1. It is a tool that is used to cut across the grain of the wood is called?
A. Rip saw B. Crosscut saw C. Clamp D. Spirit Level
2. Which of the following tools is used to measure long distances?
A. Framing Square B. Spirit Level C. Tape Measure D. Pull-Push Rule
3. What tool is commonly used to check if a surface is perfectly horizontal or vertical aligned?
A. Level B. Tape measure C. Hand saw D. Mallet
4. Which of the following materials is used to smoothen the surface of the wood?
A. Wood Putty B. Nails C. Wood Glue D. Sandpaper
5. The function of a claw hammer is to
A. Cutting wood C. Smoothing wood
B. Pulling out nails and driving them in D Measuring angles
6. Spencer wants to determine if the corner of his cabinet that he is crafting is at perfect 90 degrees, what
is the appropriate tools will he use?
A. Framing Square B. Spirit Level C. Tape Measure D. Nails
7. Which of the following tool has a chisel-like teeth and used to cut along the grain of the wood?
A. Rip saw B. Crosscut saw C. Clamp D. Spirit Level
8. You are assembling a wooden table, and you need to glue two pieces of wood together for a strong joint.
However, as you apply the glue, you notice that the pieces keep shifting out of alignment before the glue
sets.
Which of the following is the best tool to use in this situation?
A. Hammer B. Clamp C. Chisel D. Screwdriver
9. Which of the following sandpaper grit is appropriate for polishing and ultra smooth finishes of the wood
surface?
A. 600+ Grit B. 220-400 Grit C. 150-180 Grit D. 80-120 Grit
10. It is a versatile engineered wood product made from thin layers (plies) of wood veneer that are glued
together
A. Plywood B. Lumber C. Wood Putty D. Wood Glue
11. What do you call the formal document that is used to ask for any materials, tools and equipment within
an organization?
A. Apology Form B. Requisition Form C. Excuse Form D. Asking Form
12. Which of the following is typically required on a requisition form?
A. Name of requestor C. Quantity needed
B. Description of item or service requested D. All of the above
13. What is the primary purpose of a requisition form?
A. To request goods or services C. To approve payroll
B. To issue invoices D. To track employee attendance
14. What happens after a requisition form is approved?
A. The requested items or services are ordered C. The form is discarded
B. The request is automatically denied D. The requester must resubmit the form
15. Why is it important to provide a clear justification for a requisition request?
A. To ensure budget approval C. To speed up the approval process
B. To prevent unnecessary purchases D. All of the above
16. Who is responsible for reviewing and approving requisition forms?
A. The janitorial staff C. The finance or purchasing manager
B. Any employee in the organization D. The receptionist
17. Which of the following should NOT be included in a requisition form?
A. Detailed item descriptions C. Justification for the request
B. Personal opinions about the request D. The name of the approver
18. Which of the following reference to items that are used manually by hand?
A. Tools B. Equipment C. Materials D. Utensils
19. Which of the following refers to the statement of payment?
A. Bills B. Quantity C. Requisition D. Damage
20. Which of the following refers to the items that are consumed when performing a carpentry tasks?
A. Tools B. Equipment C. Materials D. Utensils
21. Why is it important to use proper tools in carpentry?
A. To increase work efficiency and precision C. To waste materials faster
B. To make the job more difficult D. To reduce costs by using fewer tools
22. Where should you place the spirit level when checking if a surface is level?
A. At an angle on the surface C. Hanging above the surface
B. Flat on the surface D. Holding it in the air
23.What does it mean if the bubble is exactly between the two center lines?
A. The surface is perfectly level C. The surface is tilted
B. The surface is uneven D. The surface is vertical
24. Which of the following materials is used to fill cracks and holes on the wood surface to have a smooth
and pleasant appearance?
A. Plywood B. Lumber C. Wood Putty D. Wood Glue
25. Which of the following material is used to bond two pieces of wood if nails are not available?
A. Plywood B. Lumber C. Wood Putty D. Wood Glue
26. Which maintenance strategy is performed only AFTER equipment failure occurs?
A) Preventive Maintenance C) Condition-Based Maintenance
B) Corrective Maintenance D) Risk-Based Maintenance
27. Which maintenance strategy is performed BEFORE an equipment failure occurs?
A) Preventive Maintenance C) Condition-Based Maintenance
B) Corrective Maintenance D) Risk-Based Maintenance
28.Which maintenance strategy is performed to the MOST USED EQUIPMENT and might cause delay when
it fails?
A) Preventive Maintenance C) Condition-Based Maintenance
B) Corrective Maintenance D) Risk-Based Maintenance
29. Taka ensures that his table saw is free from debris, rust and other elements cleaning it and putting
mineral oil to ensure its perfect running condition. In this situation Taka shows what process or activity?
A) Cleaning B) Maintenance C) Inspection D) Caring
30. Before conducting maintenance, Makoto ensures that all he checks for any signs of defect, damage to
the equipment. In this situation, what does Makoto performing?
A) Cleaning B) Maintenance C) Inspection D) Caring
31.A carpenter regularly applies wood sealant to outdoor furniture to prevent damage from moisture and
insects. What type of maintenance is this?
A) Preventive Maintenance C) Condition-Based Maintenance
B) Corrective Maintenance D) Risk-Based Maintenance
32. A cabinet door in a customer’s house is already broken, and the carpenter is called in to fix it. What
kind of maintenance does this represent?
A) Preventive Maintenance C) Condition-Based Maintenance
B) Corrective Maintenance D) Risk-Based Maintenance
33. Which of the following types of maintenance uses AVERAGE VALUE AND PERFORMANCE of an
equipment through sensors to determine its probability of failing?
A) Preventive Maintenance C) Condition-Based Maintenance
B) Corrective Maintenance D) Risk-Based Maintenance
34. A company assesses which wooden structures in a building are most at risk of termite infestation and
applies protective treatments to those areas first. What type of maintenance is this?
A) Preventive Maintenance C) Condition-Based Maintenance
B) Corrective Maintenance D) Risk-Based Maintenance
35. What is the difference between condition-based maintenance and risk-based maintenance?
A) Condition-based maintenance relies on real-time data and equipment condition
monitoring, while risk-based maintenance prioritizes maintenance tasks based on the
potential risk and consequences of failure of the frequently used tools and equipment.
B) Condition-based maintenance is performed at regular intervals, while risk-based
maintenance is only conducted after a failure occurs.
C) Condition-based maintenance focuses on reducing costs, while risk-based maintenance
focuses solely on improving safety.
D) Condition-based maintenance uses historical failure data, while risk-based maintenance
ignores risk factors and relies on fixed schedules.
36. Allan wants to cut a lumber at a 45-degree angle, what type of saw will he use in this task?
A) Crosscut Saw C) Table saw
B) Rip Saw D) Miter saw
37.Which of the following type of saw will Glenda use if she wants to cut across the grain of the lumber?
A) Crosscut Saw C) Table saw
B) Rip Saw D) Miter saw
38. Which of the following types of saws is needed of you want to cut the wood along its grain?
A) Crosscut Saw C) Table saw
B) Rip Saw D) Miter saw
39. Andy wants to try carpentry tasks particularly basic wood joints, what appropriate clamp is suitable for
his task? A) C-Clamp C) Specialized Clamp
B) Pipe Clamp D) Bar Clamp
40. Which of the following carpentry materials is used to cut materials particularly wood?
A) Drilling Jig C) Screw
B) Saw Blade D) Scribe
41. Which of the following materials is used to fill cracks and holes on the wood surface to have a smooth
and pleasant appearance?
A. Plywood B. Lumber C. Wood Putty D. Wood Glue
42. What does it mean if the bubble is exactly between the two center lines?
A. The surface is perfectly level C. The surface is tilted
B. The surface is uneven D. The surface is vertical
43. Which of the following material is used to bond two pieces of wood if nails are not available?
A. Plywood B. Lumber C. Wood Putty D. Wood Glue
44. It is equipment that is used to create holes in various materials, such as wood, metal, and plastic
A. Cross Cut Saw B. Ripsaw C. Framing Square D. Hand Drill
45. Which of the following DOES NOT BELONG to carpentry materials?
A. Nails B. Plywood C. Saw D. Wood Glue
46. What tool is commonly used to check if a surface is perfectly horizontal or vertical aligned?
A. Level B. Tape measure C. Hand saw D. Mallet
47. It is a versatile engineered wood product made from thin layers (plies) of wood veneer that are glued
together
A. Plywood B. Lumber C. Wood Putty D. Wood Glue
48. Which of the following types of tables saw has a portable and can be moved around the shop?
A) Benchtop Table Saws C) Contractor Table Saws
B) Cabinetmaking Table Saws D) Saw Blade
49. Which of the following types of miter saw is used to makes straight and angled cuts (0-45 degrees)?
A) Standard Miter Saws C) Sliding Compound Miter Saws
B) Compound Miter Saw D) Saw Blade
50. Which of the following types of miter saw can produce multiple geometric angles cut?
A) Standard Miter Saws C) Sliding Compound Miter Saws
B) Compound Miter Saw D) Saw Blade
