PRELIMINARY RELEASE

TLB870 MACHINE
SPECIFICATION –
TIER 4F

www.terex.com/construction
Effective Date: November 2016. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings
in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment.
Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death.
The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other
warranty, express or implied. Terex, the Terex Crown design and Works For You are trademarks of Terex Corporation or its subsidiaries. All rights are
reserved. All other trademarks are property of their respective owners.
© 2015 Terex Construction.

Central Boulevard, ProLogis Park,

Coventry, England CV6 4BX
Tel +44 (0) 2476 339400
SPECIFICATIONS
LOADER DIMENSIONS BACKHOE PERFORMANCE
Standard / 7 in 1 Bucket
mm (ft) NOTE Standard Dipper
Retracted
Deep Dig Dipper
Extended
N. Dump clearance – at 45° 2722 (8'11") METRIC MEASUREMENTS ARE THE CRITICAL VALUES
Standard Bucket HD Bucket Standard Bucket HD Bucket Standard Bucket HD Bucket
O. Loader height 3262 (10'8") DIMESIONS ARE TAKEN FROM T152021
Max slew torque kNm (Ibf-ft) 20.7 (15267) 20.7 (15267) 20.7 (15267)
P. Hinge pin height 3509 (11'6") 1 Litre = 0.26417 US Liquid Gallons
Dipper tearout kN (lbf) (SAE J49 Standard) 42.2 (9487) 42.2 (9487) 42.2 (9487) 42.2 (9487) 28.7 (6452) 28.7 (6452)
Q. Pin forward reach 385 (1'3") 1 Litre = 0.21997 Imperial Liquid Gallons
Bucket tearout kN (lbf) Speed 60 (13489) 60 (13489) 60 (13489) 60 (13489) 60 (13489) 60 (13489)
R. Reach at ground 1454 (4'9")
Power N/A 68.7 (15444) N/A 68.7 (15444) N/A 68.7 (15444)
S. Max. reach at full height 1214 (3'12")
T. Reach at full height – at 45°
U. Dig depth
732 (2'5")
134 (0'5")
ENGINE TRANSMISSION
Rollback at ground 42.4° Deutz TCD 3.6 L4 (T4F) – 4 speed synchro shuttle gearbox
Max. dump angle fully raised 49.6° Torque Rise 63% – Modulated forward and reverse clutch packs enable smooth direction changes
Electronic fuel injection – De-clutch button on gear lever
V. Overall operating height 4412 (14'6") – Direction control with neutral safety interlock
Cylinders4
– Single stage torque converter with 3:01:1 stall ratio
Capacity 3.6 L (220 in3) Front: 12.5/80 x 18 12 PR TR-09 IND
Tyres
Rear: 16.9 x 28 12 PR TI-06 IND
Rated speed 2200 rpm
Travel Speeds
Gross power @ 2200rpm Cert. rating to ISO 14396:2002 55.4 kW (74.3 hp) Forward/Reverse
Derived net rating @ 2200 rpm  51.9 kW* (69.6 hp*) 1st Km/h (mph) 5.8 (4)
2nd Km/h (mph) 9.3 (6)
Max Torque @ 1400 rpm 3rd Km/h (mph) 19.9 (12)
ISO 14396:2002 390 Nm (287.6 lbf) 4th Km/h (mph) 37.6 (23)
* Nominal non–certified values
HYDRAULIC SYSTEM
ELECTRICS – Tandem gear pumps with inloader valve
External wiring and connectors meet IP69k standard – Open centre valves
– External oil level guage
Maintenance free battery – 125 micron suction strainer
– 10 micron return line filter
12 volt negative ground
– 10 micron filler breather
Battery isolator Main pump flow @ 2200 rpm L/min(gpm US / gpm)  83 (22 / 18)
95 amp alternator Secondary pump flow @ 2200 rpm L/min(gpm US / gpm) 45 (12 / 10)
Blade type fuses System main relief setting bar (psi) 250 (3626)
100 A/hr single battery with 830 CCA-EN Standard
OPERATING WEIGHTS
CAPACITIES Ltrs (gals US / gals)
Base Machine Weight* 8003 kg (17644 lbs)
Fuel tank 140 (37.0 / 30.8) Add/Delete
Deep dig dipper + 217 kg (478 lbs)
Engine coolant 17 (4.5 / 3.7)
ROPS frame - 128 kg (282 lbs)
Engine oil (including filter) 8 (2.1 / 1.8) *Base operating weight includes cab, standard loader bucket, standard dipper sticker, 24 in | 600 mm bucket, full fuel tank,
standard counter weight 407.85 lbs | 182 Kg and 165 lbs | 75 Kg operator.
Synchro shuttle transmission 20 (5.3 / 4.4)

NOTE: IMAGE IS FOR REFERENCE PURPOSE ONLY

Rear axle (including final drives) 15.5 (4.1 / 3.4)
LOADER PERFORMANCE
Front axle (including final drives) 9.1 (2.4 / 2.0)
Standard Bucket
Hydraulic tank 52 (13.7 / 11.4)
Bucket breakout* kN (lbf) 42 (9441.98)
BACKHOE DIMENSIONS* AXLES AND BRAKES Arms breakout* kN (lbf) 46(10341.2)

Standard Dipper – mm (ft) Deep Dig Dipper – mm (ft) Lift capacity to full height** kN (lbs) 3759.34 kg (8288)
– Outboard planetary drives for easier sevicing
Retracted Extended – Foot operated differential lock with 100% lockup Rated operating capacity** kN (lbs) 2813.55 kg (6203)
– 16° front axle oscillation to maintain maximum ground contact to traction
A. Dig depth Maximum SAE 4401 (14'5") 4401 (14'5") 5744 (18'10") – Power boosted outboard mounted unit disc brakes *Loader specifications are stated in accordance with ISO 14397 and EN474 Part 4.
 2 ft Flat Bottom SAE 4388 (14'5") 4388 (14'5") 5731 (18'10") – Self equalizing and self adjusting brakes **Based on basic machine configuration; cab, standard loader bucket, standard dipper sticker, 24 in | 600 mm bucket,
full fuel tank.
B. Reach – ground level to slew 5725 (18'9") 5725 (18'9") 6995 (22'11") – Selectable 2 or 4 wheel braking
Axle Ratings Max Static Loading Max Dynamic Loading
C. Loading reach 1740 (5'8") 1740 (5'8") 2672 (8'9")
Front kN (lbf) 225 (50582) 90 (20233)
D. Operating height 5623 (18'5") 5623 (18'5") 6606 (21'8") Rear kN (lbf) 187.5 (42152) 75 (16861)
E. L oading height SAE 3963 (13'0") 3963 (13'0") 4939 (16'2")
Max dumping height 3884 (12'9") 3884 (12'9") 4859 (15'11") TURNING CIRCLES
F. Straight wall dig depth 2557 (8'5") 2557 (8'5") 3714 (12'2")
Over Tyres Over Bucket
G. Bucket rotation degrees Speed 194 194 194
Without brakes m (ft) 7.96 (26'1") 10.86 (35'8")
Stabiliser spread 2290 (7'6") 2290 (7'6") 2290 (7'6") With brakes m (ft) 7.26 (23'10") 10.07 (33'0")
Max. levelling angle degrees 6.2 6.2 6.2
*Includes standard 600mm HD bucket