@AIRBUS
AIRBUS S.A.S.
Customer Services
Technical Data Support and Services
31707 Blagnac Cedex
FRANCE
FAPE3
COMPONENT MAINTENANCE MANUAL
WITH
ILLUSTRATED PART LIST
NUT ASSY - PINTLE PIN
PN : D3214022000000
D3214022000200
D3215001100000
D3215601000000
D3215601000200
D3215603100000
Issue: Jan 01/14 32-11-04 Rev: Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
HIGHLIGHTS
Revision No. 3 - Jul 01/20
LOCATIONS CHG DESCRIPTIONS OF CHANGE
CODE
HIGHLIGHTS
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
LIST OF EFFECTIVE CONTENT
Revision No. 3 - Jul 01/20
CONTENT CHG LAST REVISION
CODE DATE
INTRODUCTION
TASK 32-11-04-871-801-A01 Jan 01/16
DESCRIPTION AND OPERATION
TASK 32-11-04-870-802-A01 Jan 01/16
CLEANING
TASK 32-11-04-100-801-A01 Jan 01/16
Subtask 32-11-04-100-001-A01 Jan 01/16
INSPECTION/CHECK
TASK 32-11-04-210-801-A01 Jan 01/17
Subtask 32-11-04-210-001-A01 Jul 01/20
STORAGE INCLUDING TRANSPORTATION
TASK 32-11-04-550-801-A01 Jan 01/16
Subtask 32-11-04-550-001-A01 Jan 01/16
ILLUSTRATED PARTS LIST
IPL Introduction
TASK 32-11-04-872-801-A01 Jan 01/16
VENDOR LIST Jan 01/16
Figure 01
FIGURE 32-11-04-991-801-001 Jan 01/14
Parts List Jan 01/16
Figure 01A
FIGURE 32-11-04-991-801-A01 Jan 01/14
Parts List Jan 01/16
L.E.C.
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
TABLE OF CONTENTS
INTRODUCTION
32-11-04-871-801-A01 Introduction
DESCRIPTION AND OPERATION
32-11-04-870-802-A01 General
CLEANING
32-11-04-100-801-A01 Cleaning
INSPECTION/CHECK
32-11-04-210-801-A01 Nut Assembly - Check
STORAGE INCLUDING TRANSPORTATION
32-11-04-550-801-A01 Nut Assembly Storage
ILLUSTRATED PARTS LIST
32-11-04-872-801-A01 Introduction Illustrated Parts List (IPL)
VENDOR LIST
DETAILED PARTS LIST
T.O.C.
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
LIST OF SERVICE BULLETINS
SB No REV No MOD No INCORP. TITLE
DATE
*** NO SB ***
SBL
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
INTRODUCTION
**For PN’s ALL
TASK 32-11-04-871-801-A01
Introduction
1. General
A. This manual is written to the iSpec 2200 and in ASD Simplified Technical English (STE). The
international SI units of measurement are used in this manual, with imperial units shown in
parentheses.
B. The manual contains data about maintenance on the component in a workshop. It does not
contain data about maintenance on the component when it is installed in the aircraft.
C. Only approved persons with the necessary skills are permitted to do the maintenance procedures
in this manual.
D. Maintenance Task Oriented Support System (MTOSS) task and subtask identification is used in
this manual. The maintenance tasks and other data have special MTOSS numbers for Electronic
Data Processing (EDP). The user of the manual can ignore the MTOSS numbers.
E. This manual contains:
- Technical data for the component
- Maintenance and repair procedures about the component
- An Illustrated Parts List (IPL) with data for the component parts. Parts are identified in all
sections of the manual by the IPL-Figure and item number.
F. We verified the DISASSEMBLY, TESTING and ASSEMBLY procedures by simulation.
2. How to use the manual
A. Make sure that the manual contains the information applicable to your component.
B. If you need to identify a part or find a part number, use the search function.
C. You must use the instructions in this manual for all the component maintenance. Read all the
applicable WARNINGS and CAUTIONS before you do the work on the component.
3. List of Abbreviations
ACM Abbreviated Component Maintenance Manual
AEB Airline Engineering Bulletin
ASD Aero Space and Defence Industries Association of Europe
ATA Air Transport Association of America
ATLAS Abbreviated Test Language for All Systems
CMM Component Maintenance Manual
CMS Component Maintenance Sheet
FIN Functional Item Number
INTRO
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
IPC Illustrated Parts Catalog
IPL Illustrated Parts List
ID Inside Diameter
MFG Manufacturing
MFR Manufacturer
MOD Modification
MTOSS Maintenance Task Oriented Support System
NTF Non Textile Floor
OD Outside Diameter
PA Poly-Amide
PARA Paragraph
PC Poly-Carbonate
PMS Process and Materials Specification
PN Part Number
PU Poly-Urethane
PV Poly-Venyl-Fluorite
SB Service Bulletin
SERNO Serial Number
STE Simplified Technical English
TBD To Be Determined
List of Abbreviations
TABLE 1
INTRO
Page 2
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
DESCRIPTION AND OPERATION
**For PN’s ALL
TASK 32-11-04-870-802-A01
General
1. Nut Assembly
NOTE : See IPL_FIGURE_01 and IPL_FIGURE_01A.
A. The nut assembly is installed on the main landing-gear rear pintle-pin (See CMM 32-11-07).
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
CLEANING
**For PN’s ALL
TASK 32-11-04-100-801-A01
Cleaning
1. General
- Not applicable
2. Job Set-up Information
A. Consumable Materials
REFERENCE DESIGNATION
08BAA9 Non Aqueous Cleaner-General
14SBA1 Textile-Lint free-Cotton
Consumable Materials
TABLE 1
3. Procedure
Subtask 32-11-04-100-001-A01
A. Cleaning
NOTE : See IPL_FIGURE_01 and IPL_FIGURE_01A.
(1) Use Material No. 08BAA9 Non Aqueous Cleaner-General to fully clean the nut 01-030 or
01A-030, then dry the nut 01-030 or 01A-030 with Material No. 14SBA1 Textile-Lint free-
Cotton.
Page 4001
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
INSPECTION/CHECK
**For PN’s ALL
TASK 32-11-04-210-801-A01
Nut Assembly - Check
1. General
A. Examine the component:
- To make sure it is clean
- For distortion
- For signs of corrosion
- For scoring or abrasions and evidence of wear
- For damage
- To make sure all threads are serviceable.
2. Procedure
Subtask 32-11-04-210-001-A01
A. Sta-Lok Nut
NOTE : See IPL_FIGURE_01 and IPL_FIGURE_01A.
(1) Examine the Sta-Lok nut 01-030 or 01A-030 for the correct serial number and part
number. Make sure that the serial number and the part number are recorded on the
applicable log card.
NOTE : The Sta-Lok nut is a Life Limited Item and needs to be identified by a serial
number to allow a record of consumed life to be recorded (SB 32-1266). Re-
protect the Sta-Lok nut after vibro-etching the serial number.
(2) Do a detailed visual examination of the Sta-Lok nut:
- To make sure it is clean
- For distortion
- For signs of corrosion
- For visible cracks
- For scoring or abrasions and evidence of wear
- For damage
- To make sure all threads are serviceable.
(3) If damage is found contact Airbus for repair instructions.
Page 5001
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
STORAGE INCLUDING TRANSPORTATION
**For PN’s ALL
TASK 32-11-04-550-801-A01
Nut Assembly Storage
1. General
-
NOTE : See IPL_FIGURE_01 and IPL_FIGURE_01A.
A. Refer to Material Storage Data (MSD).
The MSD document is a chargeable service to support customers with inventory planning, with
a specific focus on shelf life data, hazard information and other related general storage data. A
copy is provided, free of charge for the customer during the material readiness process. It is
available on CD-ROM from Airbus, or as a download from the Airbus Spares Portal via direct
access of SSO (Single Sign On) in AirbusWorld.
2. Procedure
Subtask 32-11-04-550-001-A01
A. Material Storage Data
(1) Not applicable.
Page 15001
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
ILLUSTRATED PARTS LIST
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
INTRODUCTION
**For PN’s ALL
TASK 32-11-04-872-801-A01
Introduction Illustrated Parts List (IPL)
1. General
A. The procedure recommended for finding a part number, or details of a part are in paragraph 2
of this introduction.
B. The IPL contains:
- illustrations that show an exploded view of the parts,
- the related detailed Parts Lists.
C. The IPL is used to identify, to get, keep and issue replacement aircraft parts and units.
D. AIRBUS S.A.S. has no responsibility for parts and/or units deleted or revised as a result if
airline initiated modifications are included.
E. Part numbers shown in this document are written to Air Transport Association of America
(ATA) Specification ISPEC 2200.
F. Illustrations are applicable to more than one customer.
G. In the Detailed Parts List, each figure has its own page numbering system that starts at zero.
2. How to use the IPL
A. To find a Part Number (P/N) in a Figure or Illustration you can either:
- Enter the PN in the SEARCH tool within the AirN@v / Workshop. This will show you the
Figure or Figures where this appears. Click on your chosen Fig/Item number to go open the
Figure.
- Or refer to the Alph/Numeric Parts List and find the PN. In the Fig/Item column it will
show you all the figures where this PN exists, and the Item number. Click one of these to
open the Figure.
3. Plan of the IPL
A. Indenture System of the Detailed Parts List
(1) The indenture system shows how parts and assemblies relate to their next higher
assemblies (NHA) as follows:
1234567
Assembly
Attaching parts for assembly
.Detail parts for assembly
.Sub-assembly
..Detailed parts for sub-assembly
..Sub-sub-assembly
IPL INTRO
Page 1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
...Detailed parts for sub-sub-assembly.
B. AIRBUS Part -- Numbering System
(1) The example that follows shows the identification of a part/assembly:
Basic Part Number L 57 4 6 0200 000 00
DRAWING NUMBER PARTS LIST DATA
AIRBUS Part -- Numbering System
TABLE 1
(1) L Aircraft A = AIRBUS A310/A300/A300-600 Aircraft
D = AIRBUS A320 Aircraft
F = AIRBUS A340 Aircraft
L = AIRBUS A380 Aircraft
NOTE: Initial aircraft type the part assembly was first used
on.
(2) 57 ATA Chapter Design and Manufacturing requirements of the above
breakdown will not always be the same as those in the
ATA Specification and the IPL.
(3) 4 ATA Section Changes with the ATA Chapter.
(4) 6 Drawing Responsibility The Engineering Department that is responsible for the
Design.
(5) 0200 Drawing Number The Drawing number.
(6) 000 Part or Assembly Part/assembly number.
(7) 00 Technical Specification Manufacturing or spares requirements suffix.
AIRBUS Part -- Numbering System
TABLE 2
C. Suffixes
SUFFIXES DEFINITION REMARKS
00 and 40 to 49 Production Part to drawing
The same as the Production Part.
01 to 39 Production Part not to drawing
50 Spare Part to drawing Spare part is not the same as the
51 to 59 Spare Part not to drawing Production Part
60 to 89 Spare Part not to drawing and not Number for Product Support
storable Breakout, but not for Production
99 Spare Part to drawing and not
storable
90 to 94 Specific Part for Repair Kits
IPL INTRO
Page 2
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
SUFFIXES DEFINITION REMARKS
95 to 98 Specific Part for Service Bulletin Kits
Suffixes
TABLE 3
D. D. Detailed composition for an IPL
Column 1 Column 2 Column 3 Column 4 Column 5
FIG-ITEM PART NUMBER 1234567 NOMENTLATURE USAGE UNIT
FROM TO PER
ASSY
1 -- 1A L5217605100000 ARM ASSY-SUPPORT EFF//NHA RF
1 -- 2A L5217605100100 ARM ASSY-SUPPORT EFF//NHA RF
10A L5217605100100 .SUPPORT ASSY (LH) ) (V2D671) 1
SEE 52-10-50-02 FOR DET
20A L5217605500300 .SUPPORT ASSY (RH) (V2D671) 1
SEE 52-10-50-02 FOR DET
*** L5217605501100 .SUPPORT ASSY (V2D671) SPARE
30A L5217609020000 .SHEET-BONDING (V2D671) 2
40A ABS0114T3-1 .BOLT V2D671) 18
50A NAS1149C0363R .WASHER (V80205) 21
60A L9247100502400 .STRAP-BONDING (V2D671) 3
70A L9247100500400 .STRAP-BONDING (V2D671) 1
80A L9247100501400 .STRAP-BONDING (V2D671) 1
90A L5217608620000 .BRACKET-DOOR (V2D671) 1
100A ABS0114T5-25 .BOLT (V2D671) 1
110A L5217608720000 .WASHER-TOOTHED (V2D671) 2
120A NAS1149C0532R .WASHER (V80205) 1
130A NAS1291C5M .NUT (V80205) 1
OPT TO H42-5 (V15653)
OPT TO PLH55M (VF0224)
OPT TO VN300D054
(V92215)
140A L5217605600000 .BRACKET ASSY (V2D671) 2
*** L5217605600200 .BRACKET ASSY (V2D671) SPARE
145A L5217605620000 ..BRACKET (V2D671) EFF/NHA 1
IPL INTRO
Page 3
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
Column 1 Column 2 Column 3 Column 4 Column 5
USED WITH L5217605600000
*** L5217605620200 ..BRACKET (V2D671) SPARE
150A MS21209F4-15 ..INSERT (V96906) EFF/NHA 1
USED WITH L5217605600000
160A L5217607600000 .BUMPER ASSY (LH) (V2D671) 1
170A L5217607600100 .BUMPER ASSY (RH) (V2D671) 1
180A L5217607800000 ..BRACKET ASSY (LH) (V2D671) 1
190A L5217607800100 ..BRACKET ASSY (RH) (V2D671) 1
200A L5217607820000 ...BRACKET (LH) (V2D671) 1
210A L5217607820100 ...BRACKET (RH) (V2D671) 1
220A D5237111620400 ...BUSHING-SHOULDERED (V2D671) 1
230A L5217608000000 ..STOP ASSY (V2D671) 1
240A L5217608120000 ...STOP (V2D671) 1
250A L5217608220000 ...SUPPORT (V2D671) 1
260A ABS0114T5-15 ..BOLT (V2D671) 1
270A NAS1291C5M ..NUT (V80205) 1
OPT TO H42-5 (V15653)
OPT TO PLH55M (VF0224)
OPT TO VN300D054
(V92215)
Detailed composition for an IPL
TABLE 4
(1) Help for the IPL-Page example
Column 1 Figure Number The figure number refers to its
related illustration. Modifications and
system variants can cause a different
figure. It will be added with a
sequential alpha-suffix, e.g. modified
versions of Figure 1 would be Figure
1A then Figure 1B and so on.
Non-Illustrated Parts The dash before an item number
shows it is not illustrated.
Item Number Initially, only every tenth number is
used for item numbers so that other
items can be added later.
IPL INTRO
Page 4
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
Column 2 AIRBUS Part AIRBUS manufactured parts e. g.
L5217605600000
Standard Part A standard part such as AN, MS,
NAS ...., is not given a supplier code.
Column 3 See XX-XX-XX-XX for DET or NHA Identifies correctly:
- the location of the full breakdown
of a sub-assembly in the IPL
- the location of the NHA of the item
in the IPL.
Usage From To In the Usage From To field the
statement ”EFF//NHA” related to
an NHA. At the same time in the
Nomenclature Field under the
description of the Part A Statement
”Used With ***” will state the NHA
PNR.
Symmetrical Parts LH or RH identifies the left hand or
right hand position of the part. If a
part is only on one assembly, (LH
side) or (RH side) follows its name.
VENDOR CODE A supplier code is given to the parts
manufactured by firms other then
AIRBUS.
Non-Procurable Item (NP) Identifies an item that is not
supplied.
Column 4 Usage From To In the Usage From To field the
statement ”EFF//NHA” related to
an NHA. At the same time in the
Nomenclature Field under the
description of the Part A Statement
”Used With ***” will state the NHA
PNR.
Column 5 Quantity The number in the Units Per Assy
column shows the quantity of parts
used for each NHA or installation.
AR = as required
RF = reference (quantity shown in
the NHA figure).
Help for the IPL-Page example
TABLE 5
IPL INTRO
Page 5
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
E. Other Notes
(1) ORDER OVRLGTH MPN XXXXXXXXXX
- Identifies a part number with more than fifteen characters that cannot fit in the part
number column.
(2) SB XX-XXX
- Identifies the Service Bulletin (SB) which adds to or changes the Detailed Parts List.
When the SB number shown in the name column is related to an AIRWORTHINESS
DIRECTIVE (AD), the letters AD and its number are shown in parenthesis. Also they
will follow the SB number, for example: PRE SB XX XXX (AD XXXX), POST SB XX
XXX (AD XXXX), ADDED by SB XX XXX (AD XXXX), DELETED BY SB XX XXX
(AD XXX), etc.
(3) SEL FROM
- Identifies a group of alternative parts from which you can take the necessary ones.
(4) OVERSIZE/UNDERSIZE
- Identifies a part as oversize or undersize.
(5) OPT TO
- Identifies an optional part that is fully interchangeable with the initial part.
(6) ALT FROM PN XXXXXXXXXX
- Identifies an alternate part number (this is a part that is fully interchangeable with the
initial part after it has had a change(s)).
(7) BUY PN XXXXXXXXXX
- Identifies the replacement part for the part in the part number column.
(8) LM = LOCAL MANUFACTURE
- Identifies the part number of the basic material (e.g. for seals, hinge strips, extrusion
etc...) from which the part in the part number column is manufactured.
- Identifies the unit of measurement followed by the dimensions or quantity.
(9) SEE CMM OR ACMM
- Refer to the Component Maintenance Manual or Abbreviated Component Maintenance
Manual for the part listed in the Detailed Parts List.
(10) MADE FROM JXXXX, MADE BY VXXXXX, MM XXX
- Identifies a part that is made from bulk material e.g. seals extrusions etc. and, if
necessary, the unit of measurement and quantity.
(11) USED ON MPN
- Identifies the NHA for a part in the part number column. This is used when the NHA
is not clear from the Usage Code (almost the same assemblies with details that are not
the same but have a single breakdown).
IPL INTRO
Page 6
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
(12) VENDOR CODE
(a) These codes agree with the current issue of the Manufacturers Cataloging Handbook
H4/HB:
- Federal Supply Code for Manufacturing (FSCM) or Commercial and Government
Entity (CAGE) code (United States and Canada only).
- NATO Supply Code for Manufacturers (NSCM) codes (does not include United
States and Canada)
(b) The letter ’V’ comes before the vendors code. For suppliers with no official code,
AIRBUS has given a provisional code. These codes are identified in the supplier table
by the information ”DUMMY CODE”.
NOTE : Suppliers who manufacture parts for which AIRBUS S.A.S. has an exclusive
sale right are not given a vendor code.
- AIRBUS standard parts (Prefix DAN, NSA etc...) are given the supplier code of
the seller of the parts. If there is more than one seller, a dummy supplier code
VT0000 is assigned to the related P/N. In this case, the additional cross-
reference table gives, for each P/N the various supplier codes and their own P/N
if applicable.
NOTE : All relevant Supplier Codes are shown in the ’Vendors Name and Code
List’, which is a part of the IPL INTRO.
IPL INTRO
Page 7
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
VENDOR LIST
CODE NAME AND ADDRESS
V97393 TBIL
VB1103 TBIL
VFAPE3 TBIL
IPL INTRO
Page 8
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
DETAILED PARTS LIST
Page 10001
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
10 20 30
F_PL_321104_01_0_01_00
NUT ASSY
Figure 01 / FIGURE-32-11-04-950-801-01
Page 10001-0
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
FIG-ITEM PART NUMBER NOMENCLATURE USAGE UNIT
1234567 FROM PER
TO ASSY
01 - 001A D3214022000000 NUT ASSY VFAPE3 RF
01 - 001B D3214022000200 NUT ASSY VFAPE3 RF
OPT TO D3215001100000 FAPE3
01 - 001E D3215001100000 NUT ASSY VFAPE3 RF
OPT TO D3214022000200 FAPE3
01 010A SLS40636M75 . WIRE-STA LOK V97393 001
Optional Vendor Code B1103
used on 001A, 001B, 001E
01 020A SLW40636M75 . WASHER-STA LOK V97393 001
Optional Vendor Code B1103
used on 001A, 001B, 001E
01 030A SLN40636M75 . NUT-STA LOK V97393 001
SLN41193 97393
Optional Vendor Code B1103
used on 001A
01 030B SLN41193 . NUT-STA LOK V97393 001
OPT TO SLN41193SP1 97393
used on 001B, 001E
- ITEM NOT ILLUSTRATED
Page 10001-1
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
10 20 30
F_PL_321104_01_A_01_00
NUT ASSY
Figure 01A / FIGURE-32-11-04-950-801-A01
Page 10001A-0
32-11-04 Jul 01/20
@AIRBUS
COMPONENT MAINTENANCE MANUAL
D3214022000000
FIG-ITEM PART NUMBER NOMENCLATURE USAGE UNIT
1234567 FROM PER
TO ASSY
01A - 001C D3215601000000 NUT ASSY VFAPE3 RF
01A - 001D D3215601000200 NUT ASSY VFAPE3 RF
01A - 001F D3215603100000 NUT ASSY VFAPE3 RF
01A 010B SLS40851 . WIRE-STA LOK V97393 001
Optional Vendor Code B1103
used on 001C, 001D, 001F
01A 020B SLW40851 . WASHER-STA LOK V97393 001
Optional Vendor Code B1103
used on 001C, 001D, 001F
01A 030C SLN40851 . NUT-STA LOK V97393 001
Optional Vendor Code B1103
used on 001C
01A 030D SLN41194 . NUT-STA LOK V97393 001
OPT TO SLN41194SP1 97393
used on 001C, 001D, 001F
- ITEM NOT ILLUSTRATED
Page 10001A-1
32-11-04 Jul 01/20
