AVK GATE VALVE WITH RISING STEM PN 10/16 06/89
To DIN 3352 part 4
Face to face dimension to DIN 3202 Part 1, F4
Flanges and drilling to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)
Use: Materials:
For water, sewage and neutral liquids to Body, bonnet, Ductile iron, GGG-50, to DIN 1693
max. 70°C yoke, gland, (BS 2789 grade 500 - 7)
handwheel
Coating Electrostatically applied epoxy resin
to DIN 30677 - Internally and
externally, according to GSK
specifications
Tests: Stem Stainless steel, DIN X 20 Cr 13
Stem sealing NBR rings O-rings
Hydraulic test to EN 1074-2: Wedge nut, Dezincification resistant brass,
Seat: PN stem nut and CZ 132 to BS 2874
Body: 1.5 x PN washer
Closing torque test Gland bushing Polyamid
Wedge Ductile iron, GGG-50, core fully
encapsulated with EPDM rubber
Optional extras: with integral wedge nut of
dezincification resistant brass,
Combi flange series 05 CZ 132 to BS 2874
Universal flange adaptor series 603 Pin, hexagon Stainless steel A2
Tensile resistant flange adaptor series nut, stud bolts
623 for PVC/PE-pipes Bonnet bolts Stainless steel, A2 sealed with hot
melt
Bonnet gasket EPDM
Anti friction RG5
washer
For further specification, see section "Technical information".
The designs, materials and specifications shown are subject to change without notice due to our continuing programme of product development.
AVK INTERNATIONAL A/S/2005-06-15 310689AB
AVK GATE VALVE WITH RISING STEM PN 10/16 06/89
To DIN 3352 part 4
Face to face dimension to DIN 3202 Part 1, F4
Flanges and drilling to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)
Component list
1. Valve body 9. Valve bonnet 17. Gland follower
2. Wedge body 10. Bonnet bolt seals 18. Yoke
3. Wedge 11. Gland bushing 19. Stud bolt
4. Stem nut 12. O-ring 20. Friction washer
5. Pin 13. O-ring 21. Handwheel
6. Stem 14. Washer 22. Stem nut
7. Bonnet bolt 15. Gland
8. Bonnet gasket 16. Hexagon nut
H
Open
H
Closed
Dh
L
D
Theoretical
L H open H closed R D Dh weight
Ref. nos. DN mm mm mm mm mm mm kilos
06-050-89014 50 150 - - - 165 125 20
06-065-89014 65 170 398 332 229 185 145 23
06-080-89014 80 180 429 350 229 200 160 25
06-100-89014 100 190 524 420 279 220 180 42
06-125-89014 125 200 - - - 250 210 50
06-150-89014 150 210 736 581 330 285 240 65
06-200-890X4 200 230 942 736 356 340 295 295 95
06-250-890X4 250 250 1138 882 457 400 350 355 150
06-300-890X4 300 270 1317 1009 457 455 400 410 230
X: 0= PN 10 1 = PN 16
In the sizes DN 250 and DN 300 the upper bolt holes in the flanges are metric threaded (M20 for PN 10 and M24 for PN 16).
