Equipment/machinery checklist School name:
Equipment: grinder pedestal/bench Make/model and edquip no: _______________________________________________
Location/room: _______________________________ HoD/teacher in charge: _________________________________ Year: ___________
Date Regular servicing as per maintenance checklist/major or minor repairs Maintenance performed by Time Cost Tag-out (if Tag removed
company/business/individual taken required) and checked by
Maintenance record – equipment/machinery
Equipment/machinery checklist School name:
Equipment: grinder pedestal/bench Make/model and edquip no: _______________________________________________
Location/room: _______________________________ HoD/teacher in charge: _________________________________ Year: ___________
The below checks are recommended for equipment prior to or during a unit of work where the equipment will undergo moderate to heavy use.
/ / / / / / / / Follow-up actions
Date
Signature
Equipment/machine checks
Tick or comment Tick or comment Tick or comment Tick or comment E.g. cracked blade replaced 03/18
John Smith
Visual check of mains electrical switches, wiring and/or conduit (cracks, broken
controls, etc.) Arrange for immediate repair of any faults.
Verify all guards and eye shields are secure and function correctly.
Make sure that wheels are not chipped, clogged (loaded), glazed or cracked.
Cracked wheels must be replaced immediately.
Ensure workspaces and walkways are clear and unobstructed and that no slip-
hazards are present.
Confirm availability and condition of personal protective equipment.
Conduct close inspection for damage to switch gear. Test operation of switch
gear (proper function of switch controls).
Check grit/fume extraction hoods and ducting for obstructions.
If necessary dress grinding wheels with appropriate wheel dresser.
Reset spark arresters after any wheel dressing. No greater than 2mm gap
Check that the tool rests are as close as possible to the wheel. No greater than 1.5
mm gap. Reset if necessary
Check coolant reservoirs for adequate clean coolant.
Other:
Equipment/machinery checklist School name:
Equipment: grinder pedestal/bench Make/model and edquip no: _______________________________________________
Location/room: _______________________________ HoD/teacher in charge: _________________________________ Year: ___________
Date A Date
/ /
End of semester / / / / Follow-up actions
Signature nnual check
checks Tick or Tick or E.g. blade and pulley alignment Signature Tick or comment
comment comment adjusted 02/18
John Smith Check condition of 50mm line markings defining
Sem 1 Sem 2 operator zones and access walkways.
Check the availability of spare parts e.g. eye shields, spark Review safety operating procedure and update if
arresters, grinding wheels, etc. necessary.
Lubricate all points in accordance with the manufacturer's
Other:
specification.
Protect all bare metal surfaces before term shutdown Other:
(CRC, WD40, RP7 of similar).
Clear away all grit build up and waste from the grinder Other:
housings, tool rests, spark arresters, etc.
Other:
Check security of all fixed guards.
Other:
Check the security of machine mountings to the stand, floor
or base block. Follow-up actions e.g. Yellow line for operator zone repainted
14/12 John Smith
Other:
Other:
Other:
Other:
Other:
Other:
