D:\01r projects\bcs\submittals\DD_Package_100%\LL-ID-BCS-0003.

dwg / 9/13/2024 3:01 am

PROJECT:

GENERAL NOTES LEGEND

INTERIOR LIGHTING EXTERIOR LIGHTING OWNER:

GENERAL LIGHTING PLAN NOTES: FITTING DESCRIPTION FITTING DESCRIPTION

SYMBOL SYMBOL
1. ALL DIMENSION ON PLAN IS JUST A REFERENCE FOR CENTERING AND ALIGNMENT. VERIFY ACTUAL SITE CONDITION FOR FINAL TYPE TYPE
ALIGNMENT AND CENTERING. AND THE POSITION OF ALL LIGHTING FIXTURES, AS SHOWN IN THE DRAWINGS IS APPROXIMATE Recessed downlight with 14 W LED 4000K, 55° beam angle Surface mounted linear flood light 55W LED 3000K,12° beam
Z.1 equipped with led driver, IP20. Z.F1 angle equipped with led driver, IP67.
LOCATION ONLY. THE CONTRACTOR OR INSTALLER SHOULD PROVIDE MARK TEMPLATES ON THE SITE FOR THE LIGHTING CONSULTANT Recessed downlight with 12.5 W LED 4000K, 55° beam angle Surface mounted linear flood light 13W LED 3000K,68° beam
APPROVAL PRIOR TO INSTALLATION. Z.2 equipped with led driver, IP20. Z.F2 angle equipped with led driver, IP67.
Surface/Suspended mounted downlight with 9W LED 4000K, Surface mounted led strip in aluminum 18.2 w/m LED 3000K,
Z.3 50° beam angle equipped with led driver, IP20. Z.P1 60° beam angle equipped with led power supply,
2. ALL LIGHTING ILLUSTRATION AND/OR DIMENSION ARE APPROXIMATION ONLY INTENDED TO REPRESENT BASIC FIXTURE TYPE: DO NOT
Recessed mounted downlight with 2x9 W LED 4000K, IP67.L = 5180mm
USE AS EXACT INFORMATION SOURCE. REFER FOR ACTUAL SAMPLE AND APPROVED LIGHTING SPECIFICATION SHEET BY THE LIGHTING Z.4 50° beam angle equipped with led driver, IP20. Surface mounted led strip in aluminum 15.9 w/m LED 3000K,
CONSULTANT/DESIGNER. Recessed mounted adjustable downlight with 2x27 W LED Z.P2 60° beam angle equipped with led power supply,
Z.5 4000K, 30° beam angle equipped with led driver, IP20. IP67.L = 4590mm
-
3. ANY ADJUSTMENT OR DISCREPANCY ON PLANS AND ACTUAL SITE CONDITIONS, THE PROJECT MANAGER OR CONTRACTOR SHOULD Suspended downlight with 7 W LED 4000K, 36° beam angle Surface mounted projector light 51 W LED 3000K,
Z.6 equipped with led driver, IP20. Z.S1 26° beam angle equipped with led driver, IP67.
ARCHITECT
NOTIFY THE LIGHTING CONSULTANT/DESIGNER. WITHOUT PROPER COORDINATION, DOCUMENTATION AND APPROVAL THE LIGHTING PRC # VALIDITY #
Recessed mounted adjustable downlight with 2x13 W LED Surface mounted continuous led linear 10 w/m LED 3000K,
CONSULTANT/DESIGN IS NOT LIABLE IN ANY MISTAKES OF INSTALLATION. Z.7 4000K, 30° beam angle equipped with led driver, IP20. Z.P3 120° beam angle equipped with led power supply , IP67.
IAPOA # VALIDITY #

PTR # ISSUE DATE #

Recessed mounted adjustable downlight with 9 W LED
4. VERIFY LOCATION OF MOUNTING HEIGHT FOR ALL ITEMS PRIOR TO INSTALLATION. Z.8 4000K, 36° beam angle equipped with led driver, IP20.
TIN # PLACE #

Recessed mounted adjustable spotlight with 20 W LED

Z.9 ECO' HABITAT
3000K, 24° beam angle equipped with led driver, IP20.
5. DO NO SCALE DRAWINGS FOR MEASUREMENT. Recessed mounted downlight with 8 W LED 3000K,
DEVELOPMENT CORP.
Unit 2 16th Floor, IBP Tower, Jade Drive, Ortigas
Z.10 25° beam angle equipped with led driver, IP44. Center, Brgy. San Antonio 1605 Pasig City, Metro
Manila, Philippines

GENERAL LIGHTING FIXTURE NOTES: Z.11

Recessed mounted adjustable downlight with 8 W LED
3000K, 38° beam angle equipped with led driver, IP44. INTERIOR DESIGN:

Recessed mounted downlight with 8 W LED 4000K, MECHANICAL:

1. THE LIGHTING CONSULTANT/DESIGNER IS NOT LIABLE OR RESPONSIBLE FOR ANY ALTERATIONS OR SUBSTITUTIONS THAT IS INSTALLED Z.12 60° beam angle equipped with led driver, IP20.
SANITARY:
WITHOUT APPROVAL OF THE LIGHTING CONSULTANT/DESIGNER. Suspended track light with 10 W LED 4000K, 30° beam angle
Z.TR equipped with led driver, IP20. PLUMBING:

Surface mounted flexible led 20.7 w/m, 4000K equipped with ELECTRONICS:
2. THE LIGHTING CONSULTANT/DESIGNER IS NOT RESPONSIBLE FOR ANY CONTRACTS FAILURE ON THE PROCUREMENT OF LIGHTING Z.L1 led driver, IP65. FIRE PROTECTION:
FIXTURE WITHOUT COORDINATION AND PROPER DOCUMENTATION. Surface mounted flexible led 15.9 w/m, 4000K equipped with LIGHTING:
Z.L2 led driver, IP65.
SIGNAGE:
3. REFER TO GMQ PREPARED BY QUANTITY SURVEYORS OR PROJECT MANAGER FOR THE FINAL QUANTITY OF LIGHTING FIXTURES. THE Z.L3
Surface mounted flexible led 10.8 w/m, 3000K equipped with
led driver, IP65.
LIGHTING CONSULTANT IS NOT LIABLE ON ANY DISCREPANCY ON THE QUANTITY OF THE LIGHTING. FIXTURES SHOWN IN PLANS VS
Surface mounted flexible led 6.4 w/m, 3000K equipped with
GQM GIVEN BY THE QUANTITY SURVEYORS OR PROJECT MANAGER. Z.L4 led driver, IP65.
Suspended linear luminaire with 29.2 W, 6400K equipped
4. THE LIGHTING SUPPLIER SHOULD PROVIDED THE FOLLOWING BASIC REQUIREMENTS PRIOR TO DELIVERY OF LIGHTING FIXTURES, FOR Z.W1 with led driver, IP65.
AS PER SPECIFICATION COMPLETE TECHNICAL DATA APPROVED DOCUMENTS BY THE LIGHTING CONSULTANT AND FOR Suspended linear luminaire with 14 w/m , 4000K equipped
Z.C1 with led driver, IP20.
ALTERNATIVE SPECIFICATION COMPLETE TECHNICAL DATA APPROVED DOCUMENTS BY THE LIGHTING CONSULTANT, IES FILES AND
ACTUAL SAMPLE. Surface mounted decorative light panel linear luminaire with
Z.D1 20W Led , 3000K equipped with led driver, IP20.
5. REFER TO THE LIGHTING SPECIFICATION FOR COMPLETE TECHNICAL INFORMATION. ANY CONFLICTING INFORMATION SUBMIT REVISIONS:
NO. DATE REMARKS
QUERY OR NOTIFY THE LIGHTING CONSULTANT/DESIGNER.

6. ALL MOUNTING ACCESSORIES OF LIGHTING FIXTURE SHOULD BE SUPPLIED BY THE LIGHTING SUPPLIER.

13SEP2024: ISSUED FOR COORDINATION NOT FOR CONSTRUCTION

7. THE ARCHITECT'S AND/OR INTERIOR DESIGNER TO VERIFY ALL LIGHTING FIXTURES FINISHES AND MOUNTING DETAILS.

8. THE CONTRACTOR SHALL INSTALL AND TEST ALL LIGHTING FIXTURES AS SHOWN IN THE DRAWINGS. EACH LIGHTING SHOULD HAVE
ITS OWN INDEPENDENT SUPPORT REGARDLESS OF SURFACE, RECESSED OR SUSPENDED MOUNTING.

9. THE CONTRACTOR SHOULD VERIFY THE PROPER INSTALLATION METHODOLOGY FOR EACH LIGHTING FIXTURES FROM THE GIVEN
LIGHTING SPECIFICATION BY THE LIGHTING CONSULTANT/DESIGNER. AND THE LIGHTING SUPPLIER SHOULD PROVIDED ADDITIONAL
INFORMATION LIKE SCHEMATIC DIAGRAM OR DRAWINGS OF PROPER INSTALLATION OF EACH LIGHTING FIXTURES INCLUDING
PROPER TERMINATION BETWEEN THE LIGHTING AND POWER SUPPLY OR BALLAST.

GENERAL WIRING AND LIGHTING CONTROLS NOTES:

1. ALL ELECTRICAL CONNECTION SHALL COMPLY WITH THE LATEST EDITION OF THE PHILIPPINE ELECTRICAL CODE (PEC) AND
RELEVANT REFERENCES FOR ALL WIRING SYSTEMS, WIRING SHALL BE IN CONCEALED CONDUIT/ TRUNKING UNLESS OTHERWISE
SPECIFIED.

2. THE LIGHTING CONTROLS SUPPLIER SHOULD TEST THE COMPATIBILITY BETWEEN POWER SUPPLY OR BALLAST AND LIGHTING
CONTROL SYSTEM. FOR DIMMABLE IT SHOULD BE DIMMED FROM 0%-100%.

3. ALL ALTERNATIVES LIGHTING CONTROLS NOT SPECIFIED BY THE LIGHTING CONSULTANT/DESIGNER SHOULD PROVIDE COMPLETE ITS
OWN LIGHTING CONTROL SCHEMATIC DIAGRAM AND LOAD SCHEDULE.

4. ALL AUTOMATIC LIGHTING CONTROLS DEVICES THAT ARE INSTALLED TO COMPLY WITH THE MANDATORY REQUIREMENTS OR
OBTAINED CONTROL CREDITS MUST BE CRETIFIED BY THE MANUFACTURER BEFORE IT CAN BE INSTALLED IN THE BUILDING.
SHEET CONTENTS:

5. ALL CABLE TRUNKING PENETRATION INCLUDING THOSE COMPARTMENTALIZED AREAS SHALL BE SEALED USING APPROVED FIRE
STOPPING MATERIALS. GENERAL NOTES AND LEGEND

6. ALL WIRING TO LIGHTING FIXTURES SHALL COMPRISE OF APPROVED JUNCTION BOX FOR INDOOR INSTALLATION AND
WEATHERPROOF JUNCTION BOX FOR OUTDOOR INSTALLATION.
PURPOSE OF ISSUANCE:
FOR COORDINATION FOR RFI / RFA
7. ALL LIGHTING POINTS SHALL BE PROVIDED WITH CIRCUIT PROTECTIVE CONDUCTORS AND ALL METAL PARTS SHALL BE FOR CONSTRUCTION SHOP DRAWINGS
CONTINUOUSLY GROUNDED THROUGHOUT. FOR BID/TENDER AS-BUILT DRAWINGS

RA 9266 SECTION 33
8. ALL REMOTE POWER SUPPLY OR BALLAST THAT ARE EXPOSED TO WEATHER SHOULD BE WEATHERPROOF FOR APPROVAL UNLESS
DRAWINGS,SPECIFICATIONS,ANDOTHERCONTRACTDOCUMENTSDULY
OTHERWISE STATED. SIGNED,STAMPEDORSEALED,ASINSTRUMENTSOFSERVICE,ARETHE
INTELLECTUALPROPERTYANDDOCUMENTSOFECO'HABITATDEVELOPMENT
CORPORATION,WHETHERTHEOBJECTFORWHICHTHEYAREMADEIS
EXECUTEDORNOT.ITSHALLBEUNLAWFULFORANYPERSONTODUPLICATE
ORTOMAKECOPIESOFSAIDDOCUMENTSFORUSEINTHEREPETITIONOFAND
9. DEVICES LOCATIONS SHOWN ARE SCHEMATIC AND APPROXIMATE. EXACT LOCATION SHALL BE FIELD VERIFIED DURING ROUGH-IN FOROTHERPROJECTSORBUILDINGS,WHETHEREXECUTEDPARTLYORIN
WHOLE,WITHOUTTHEWRITTENCONSENTOFARCHITECTORAUTHOROFTHE
WITH ARCHITECTURAL ELEVATIONS, CASEWORKS SHOP DRAWINGS, FURNITURE, ECT. AND SHALL BE COORDINATED WITH OTHER SAIDDOCUMENTS.

TRADES TO AVOID CONFLICT TO OTHER TRADES. DESIGNED: RTD DRAWN: RTD

CHECKED: RTD DATE: 13SEP2024

APPROVED: RTD SCALE: AS SHOWN

10. ALL WIRE SIZE IS INDICATED IN THE LOAD SCHEDULE ANY CHANGES OR ADDITIONAL LOAD AS PER SITE CONDITION. THE PROJECT NO.: 2431_BIÑAN CENTRAL SQUARE

CONTRACTOR OR PROJECT MANAGER. SHOULD NOTIFY THE LIGHTING CONSULTANT/DESIGNER. SHEET NO.:

LL-ID-BCS-0003