HAND TOOLS - PRE USE INSPECTION CHECKLIST

Customer
Date:
Site Name

Site ID Technician /
Inspector

Cable cutter & wire stripping tool

Screw driver sets - flat, philips &

Saws - hacksaw & backsaw

Drill bits - masonry & steel

Cable reel 8m - fish tape

Item Number

Brother label machine

Scriber / marking tool
Adjustable wrenches

Grounding wrist belt

Tool case / Tool box

Spirit level 400mm

Tool Description

Round metal files

Multi-meter (avo)
Torque wrenches
Krone punch tool

Square 250 mm
Crimping tools

Tape measure
Allen key sets
Centre punch

Pop rivet gun

Carpet knife
Spanner set

Side cutters
Socket set

Flashlight
Mitre box

Hammer
Scissors

torque
Pliers
1 In good general condition?

2 Are defective tools removed from site?

3 Insulation on insulated tools not compromised / missing / metal parts protruding

4 Handles not broken / fractured / splintered / missing

5 Handles wedged tightly in tool

6 Cutting edges sharp & not chipped - tools will cut smoothly without binding or skipping?

7 No mushroomed heads on impact tools (hammers, punches, chisels ect.)

8 Tool not worn / bent

9 Tool fit for purpose

10 Tools stored in clean & dry location

11 Appropriate PPE available for use of hand tools

12 Proper face & eye protection for working with hardened / tempered tools

DEVIATIONS - List all deviations per portable electrical tool below & remove tool from site until it can be fixed or
replaced
# Tool description Identification Number Deviation description

Tool Inspector Name Signature Date

REV 1
Page 1 of 1