TJ21PE5S

Diesel Generator Sets / 50 Hz

Power Output Ratings 50 Hz / 400 V

kVA 21
Standby Power (ESP)
kW 17

kVA 19
Prime Power (PRP)
kW 15

Engine

Manufacturer PERKINS
Model 404A ­22G
No of Cylinder / Configuration 4 ­ INLINE
Displacement lt 2,216
Bore / Stroke mm 84 / 100
Compression Ratio 23,3:1
Aspiration Naturally Aspirated
Governor Type MECHANIC
Cooling System WATER
Coolant Capacity lt 7 Standby Power
Lubrication Oil Capacity lt 4,9
Standby power is defined as the maximum power
available during a variable electrical power
Electrical System VDC 12 sequence, under the stated operating conditions, for
Speed / Frequency 1500 rpm / 50 Hz which a generating set is capable of delivering in the
event of a utility power outage or under test
Engine Gross Power kWm 20,6 conditions for up to 500 hours of operation per year
110 % 6,2 under average of 70% load. Overloading is not
permissible.
100 % 5,4
Fuel Consumption lt/h
75 % 4 Prime Power
50 % 2,9 Prime power is defined as being the maximum power
which a generating set is capable of delivering
Exhaust Outlet Temperature °C 505 continuously whilst supplying a variable electrical
Exhaust Gas Flow m³/min 3,94 load. Average load should be 70%. The generator can
be overloaded 10% for 1 hour per 12 hours.
Combustion Air Flow m³/min 1,45
Cooling Air Flow m³/min 29,4

Alternator

Manufacturer STAMFORD
Model PI144D
No of Phase 3
Power Factor 0,8
No of Bearing SINGLE
No of Poles 4
No of Leads 12
Voltage Regulation ( Steady State) ± %1
Insulation Class H
Degree of Protection IP 23
Excitation System AVR (Automatic Voltage Regulator), Brushless
Connection Type STAR
Total Harmonic Content (No Load) < %2
Frequency Hz 50
Voltage Output VAC 230 / 400
Rated Power (Standby) kVA 22
Efficiency % 84,4

Noise dB(A)
W x L x H (mm) Weight (kg) lt Fuel Tank (lt)
@ 1m
Canopied 700 x 1750 x 1200 621 75 70
Open Skid 710 x 1400 x 1050 456 75 TBA

­ Technical information and values are according to ISO8528, ISO3046,NEMA MG­1.22, IEC 60034­1, BS 4999­5000, VDE 0530 standards.
­ Producing with ISO9001, ISO14001, OHSAS18001, TSE, CE standards.
­ All information given in this leaflet is intended for general purposes only. Due to a policy continuous improvement Teksan reserves the right to amend
details and specifications without notice and all information given is subject to the Teksan's current condition of sales.

TBA: To Be Ask TBD: To Be Determined NA: Not Avaliable N/A: Not Applicable TTD21PE5S0414­EN
www.teksangenerator.com

16.05.2015 16:53