KNITTING PATTERN
Barley Field
                      Slipover
        Design: JoJo Knitwear | Hobbii Design
Barley Field – Slipover | No. 2422-243-7901 | © Hobbii 2024 | 1
  MATERIALS                                          SIZE
  4 (4) 5 (5) 6 (6) skeins of Divina in color        S (M) L (XL) 2XL (3XL)
  Cardamom (09)
  2 (2) 2 (2) 3 (3) skeins of Soft Alpaca Lace in    MEASUREMENTS
  color Taupe (43)
                                                     Length: 48 (50) 52 (54) 56 (58) cm / 18.9 (19.7)
                                                     20.5 (21.3) 22.0 (22.8)″
  The slipover is worked with 1 strand of each
                                                     Width: 50 (54) 56.5 (60.5) 65 (71) cm / 19.7
  yarn quality held together
                                                     (21.3) 22.2 (23.8) 25.6 (28.0)″
  Circular needle 5 mm (US 8) and 5.5 mm
                                                     ABOUT THE PATTERN
  (US 9) – 40 cm (16") and 80-100 cm (32-39″)
                                                     The Barley Field Slipover is worked bottom
  Stitch marker
                                                     up. The slipover is worked in double rib stitch
  YARN QUALITY                                       with a lace pattern on the front. It is worked
      Divina, Hobbii                                 bottom up on a circular needle until the
  65 % Alpaca, 28 % Polyamide, 7 % Wool              armholes. Then the work is divided. From
  50 g (1.75 oz) = 150 m (164 yds)                   here, the front piece and back piece are
                                                     worked separately. The shoulders are joined
      Soft Alpaca Lace, Hobbii
                                                     with kitchener stitch, and ribbing is worked
  100 % Alpaca
  50 g (1.75 oz) = 400 m (437 yds)                   along the armholes and neck opening.
  GAUGE                                              HASHTAGS FOR SOCIAL MEDIA
  15 sts x 26 rows = 10 x 10 cm (4 x 4″) in          #hobbiidesign #hobbiibarleyfield
  stockinette stitch                                 #jojoknitwearxhobbii #hobbiinaturalbeauty
  ABBREVIATIONS                                      BUY THE YARN HERE
  st(s) = stitch(es)                                 https://shop.hobbii.com/barley-field-slipover
  k = knit
  p = purl
  RS = right side
  WS = wrong side
  co = cast on
  bo = bind off
  BOR = beginning of round
  sl1k = slip 1 stitch knitwise
  k2tog = knit 2 stitches together
  p3tog = purl 3 stitches together
  psso = pass slipped stitch over
  yo = yarnover
QUESTIONS
If you have any questions regarding this pattern, please feel free to email us at
support@hobbii.com
Please make sure to include the pattern's name and number.
Happy Crafting!
                  Barley Field – Slipover | No. 2422-243-7901 | © Hobbii 2024 | 2
Pattern
SIZE GUIDE
The measurements stated in the pattern only apply if you get the right gauge. The sizes S (M) L
(XL) 2XL (3XL) correspond to a chest measurement of 85-90 (90-95) 95-100 (100-110) 110-120
(120-130) cm / 33.5-35.4 (35.4-37.4) 37.4-39.4 (39.4-43.3) 43.3-47.2 (47.2-51.2)″.
BODY
Using needle 5 mm (US 8), co 164 (176) 184 (196) 212 (228) sts with one strand of Divina held
together with one strand of Soft Alpaca Lace. Work double rib stitch as follows: *K2, p2; repeat
from * to end. Continue until the ribbing measures 6.5 cm / 2.6″. Change to needle 5.5 mm (US
9). K 1 row while decreasing 14 sts evenly across = 150 (162) 170 (182) 198 (214) sts. Place a
marker on each side, resulting in 75 (81) 85 (91) 99 (107) sts for the front piece and back piece,
respectively. This is the BOR. Work the front piece according to the chart as follows: k0 (3) 0 (3) 2
(1), work chart A 1 time, work chart B a total of 7 (7) 8 (8) 9 (10) times, k0 (3) 0 (3) 2 (1). Work
stockinette stitch on the back piece. Continue like this until the work measures 27 (28) 29 (30) 31
(32) cm / 10.6 (11.0) 11.4 (11.8) 12.2 (12.6)″. Take a look at the slipover to estimate whether it fits
you. It is important that the last row before dividing the work is an odd row in the chart. Put the
back piece sts on hold.
FRONT PIECE
Work in the flat from here. The first row is an even row in the chart and is worked from the WS.
Bo 3 sts on each side for the armholes a total of 2 (2) 2 (2) 3 (3) times and then 1 st on each side
a total of 7 (7) 7 (8) 8 (9) times. = 49 (55) 59 (63) 65 (71) sts for the front piece. Continue working
the pattern as before. When the front piece measures 40 (42) 44 (44) 46 (48) cm / 15.7 (16.5)
17.3 (17.3) 18.1 (18.9)″, bo the 13 (17) 17 (19) 19 (21) middle sts for the neck opening. The
shoulders are worked separately from here. Continue working the pattern on the first shoulder
as before and bo 3 sts at the neck opening 1 time, 2 sts 1 (1) 2 (2) 2 (2) time(s) and 1 st 1 (1) 1 (1)
1 (2) time(s). Work even until the work measures 48 (50) 52 (54) 56 (58) cm / 18.9 (19.7) 20.5
(21.3) 22.0 (22.8)″. 12 (13) 13 (14) 15 (16) sts remain on the shoulder. Put the sts on hold. Work
the second shoulder following the same procedure.
                   Barley Field – Slipover | No. 2422-243-7901 | © Hobbii 2024 | 3
BACK PIECE
Work stockinette stitch in the flat. Bo 3 sts on each side for the armholes a total of 2 (2) 2 (2) 3
(3) times and then 1 st on each side a total of 7 (7) 7 (8) 8 (9) times. When the back piece
measures 46 (48) 50 (52) 54 (56) cm / 18.1 (18.9) 19.7 (20.5) 21.3 (22.0)″, bo the 23 (27) 31 (33) 33
(37) middle sts for the neck opening. The shoulders are worked separately from here. Bo 1 st at
the neck opening 1 time. Work even until the work measures 48 (50) 52 (54) 56 (58) cm / 18.9
(19.7) 20.5 (21.3) 22.0 (22.8)″. 12 (13) 13 (14) 15 (16) sts remain on the shoulder. Put the sts on
hold. Work the second shoulder following the same procedure.
FINISHING
Sew the shoulders sts together with kitchener stitch.
NECKLINE RIBBING
Using needle 5 mm (US 8) and beginning at one of the shoulders from the RS, pick up 72 (84) 92
(96) 96 (104) sts along the neck opening. Work rib stitch (k2, p2) in the round until the ribbing
measures approx 3 cm / 1.2″. Bo.
SLEEVE RIBBING
Using needle 5 mm (US 8) and beginning at the bottom of one of the armholes from the RS, pick
up 88 (92) 96 (100) 100 (104) sts along the armhole. Work rib stitch (k2, p2) in the round until the
ribbing measures approx 3 cm / 1.2″. Bo. Work the ribbing on the other sleeve following the
same procedure.
FINISHING
Weave in all ends.
Use the QR codes to find tutorials for the charts.
                  Barley Field – Slipover | No. 2422-243-7901 | © Hobbii 2024 | 4
CHARTS
Chart A:
             Row 4:
             Row 3:
             Row 2:
             Row 1:
Chart B:
                                Row 4:
                                Row 3:
                                Row 2:
                                Row 1:
           Barley Field – Slipover | No. 2422-243-7901 | © Hobbii 2024 | 5
CHART LEGEND
       no stitch - see the instructions for the next stitch
       k on RS, p on WS
       k2tog
       sl1k, k1, psso
       yo
       k1, p1, k1, p1, k1 in the same st
       k2tog, slip the st back onto the left needle, pass the next 3 sts over the first st one
       st at a time, slip the st back onto the right needle
       p3tog, let the sts stay on the left needle, the same 3 sts are k tog and then p tog,
       let the sts slide off the needle
Happy Crafting!
JoJo Knitwear
                  Barley Field – Slipover | No. 2422-243-7901 | © Hobbii 2024 | 6