Scribd
Upload
28 views1 page

Iso 9001 Certified: DNH As

The document provides specifications and installation procedures for the CP-66(T) loudspeaker, including details on power ratings, sound pressure levels, and materials used. It outlines the installation steps, safety precautions, and warranty information. DNH reserves the right to alter specifications without notice.

Uploaded by

aleandrosesc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views1 page

Iso 9001 Certified: DNH As

The document provides specifications and installation procedures for the CP-66(T) loudspeaker, including details on power ratings, sound pressure levels, and materials used. It outlines the installation steps, safety precautions, and warranty information. DNH reserves the right to alter specifications without notice.

Uploaded by

aleandrosesc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CP-66(T)

HEAD OFFICE, NORWAY ENGLAND GERMANY USA


DNH AS DNH WW Ltd DNH GmbH DNH Speakers Inc
Phone................... + 47 35 98 56 00 Phone……. + 44 1908 275 000 Phone… + 49 040 6569 30-0 Phone........... + 1 484 494 5790
Fax………............. + 47 35 98 56 10 Fax.............+ 44 1908 275 100 Fax....... + 49 040 6569 30-30 Fax…........... .+ 1 484 494 5793
E-mail...………............ dnh@dnh.no E-mail…..........dnh@dnh.co.uk E-mail...........…. dnh@dnh.de E-mail..dnh@dnhspeakers.com
ISO 9001 CERTIFIED Web-Site…………….. www.dnh.no

70/100 volt combined


transformer
Primary connections
White : Green 70 V
White : Red 100 V
Secondary
nominal tappings
C : 6,0 W 6,0 W
C : 3,0 W 3,0 W
C : 1,5 W 1,5 W
C : 0,5 W 0,5 W
Remove the lid by pressing the two clips on each side of the loudspeaker.

Sound pressure levels at 1W/1m closed 90° Specifications


Material / Color ABS / RAL 9010
Mounting 4 screws
Termination Internal screw terminals
Weight w/transformer 0,77 kg
Max. / min. amb. temp 90C / -20C
Rated power 6W
SPL 1W/1m 86 dB
SPL rated power 94 dB
Effective freq. range 140 – 20000 Hz
Dispersion (-6dB) 1kHz / 4kHz 250 / 195(horisontal)
Options Impedance, colors, labels

Installation, Operation and Maintenance Procedures

 To open the loudspeaker, press the two clips on each side of the loudspeaker and separate the cabinet from the
chassis.
 Enter the cable through a suitable cable entrance and connect to terminal.
 Fasten the chassis to the wall or roof with four screws.
 Clip the cabinet on to the chassis after termination.
 For optimum performance, always use the correct voltage / power and operate within the frequency limits as
stated.
 Do not open the loudspeaker when energized.
 This loudspeaker is supplied with two years warranty against defective workmanship.

DNH reserves the right to alter specifications without notice.


https://dnhas.sharepoint.com/sites/Teknisk/Dataark/Cabinet/CP-66(T).doc Rev. 20.01.2021

You might also like