0101010101010101010101 0101010101010101010101

0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101
0101010101010101010101 Digital Oscilloscope
0101010101010101010101
0101010101010101010101 Waveform Generator
0101010101010101010101 RF0101010101010101010101
Signal Generator Product Selection Guide
0101010101010101010101
0101010101010101010101 Spectrum Analyzer
0101010101010101010101 Network Analyzer Every Bench.
Vector0101010101010101010101
0101010101010101010101 DC Power Supply Every Engineer.
0101010101010101010101
0101010101010101010101 DC0101010101010101010101
Electronic Load Every Day.
Digital Multimeter
Probes & Accessories

SIGLENT TECHNOLOGIES CO., LTD

 Super Phosphor Oscilloscope

SDS7000A Series SDS6000A Series

SDS7404A H12 (4 GHz) SDS6204A (2 GHz)

SDS7304A H12 (3 GHz) SDS6104A (1 GHz)
SDS6054A (500 MHz)
Features and Benefits:
Features and Benefits:
• 4 analog channels, up to 4 GHz bandwidth with up to 20 GSa/s sample rate
• 4 analog channels, up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR)
• 12-bit ADC
sample rate at each channel
• Low background noise: 220 μVrms @ 4 GHz bandwidth
SPO technology • Low background noise, supports 0.5 mV/div to 10 V/div vertical scales
• Waveform capture rates up to 1,000,000 wfm/s • SPO technology
• Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000
• Supports 256-level intensity grading and color temperature display modes
wfm/s (sequence mode)
• 500 Mpts/ch standard, 1 Gpts/ch optional
• Supports 256-level intensity grading and color temperature display modes
• Digital trigger system
• 500 Mpts Record length in total for all 4 channels
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
• Digital trigger system
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
Zone Trigger simplifies advanced triggering • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
Zone Trigger simplifies advanced triggering
LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester, ARINC429 and
USB 2.0 • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester
• Segmented acquisition (Sequence) mode, dividing the maximum record
length into multiple segments (up to 124,000), according to trigger conditions • Segmented acquisition (Sequence) mode, dividing the maximum record
length into multiple segments (up to 80,000), according to trigger conditions
set by the user, with a very small dead time between segments to capture the
set by the user, with a very small dead time between segments to capture the
qualifying event
qualifying event
• History waveform record (History) function, the maximum recorded waveform
length is 124,000 frames • History waveform record (History) function, the maximum recorded waveform
length is 80,000 frames
• Automatic measurements on 50+ parameters, supports statistics with
histogram, track, trend, Gating measurement, and measurements on Math, • Automatic measurements on 50+ parameters, supports statistics with
histogram, track, trend, Gating measurement, and measurements on Math,
History and Memory traces
History and Ref
• 4 Math traces (32 Mpts FFT, Filter, addition, subtraction, multiplication,
division, integration, differential, square root, etc.), supports formula editor • 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division,
integration, differential, square root, etc.), supports formula editor
• Abundant data analysis functions such as Search, Navigate, SignalScan,
Digital Voltmeter, Counter, Waveform Histogram, Bode plot, Power Analysis, • Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
Counter, Waveform Histogram, Bode plot, Power Analysis and Eye/Jitter
Eye/Jitter Analysis and Compliance Test
Analysis
• High Speed hardware-based Average, Hi-Res; High Speed hardware-based
Mask Test function, with Mask Editor tool for creating user-defined masks • High Speed hardware-based Average, Hi-Res; High Speed hardware-based
Mask Test function, with Mask Editor tool for creating user-defined masks
• 16 digital channels (optional)
• 16 digital channels (optional)
• Built-in 50 MHz waveform generator
• 25 MHz function / arbitrary waveform generator, built-in multiple predefined
• Large 15.6” HD TFT-LCD display with 1920 * 1080 resolution; Capacitive
waveforms
touch screen supports multi-touch gestures
• Large 12.1” TFT-LCD display with 1280 * 800 resolution; Capacitive touch
• Interfaces include: 4x USB Host 3.1 Gen 1, 2x USB 3.0 Host, USB 2.0 Device,
screen supports multi-touch gestures
2x 1000M LAN, DVI-D, DP 1.2, HDMI 1.4, Audio, External Triger In, Aux Out
(Pass/Fail, Trigger Out), 10 MHz In, 10 MHz Out • Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/
Socket), micro SD card, Pass/Fail, Trigger Out, HDMI
• Built-in web server supports remote control over the LAN port using a web
browser. Supports SCPI remote control commands. Supports external mouse • Built-in web server supports remote control over the LAN port using a web
browser. Supports SCPI remote control commands. Supports external mouse
and keyboard
and keyboard

www.siglent.com 1
 Super Phosphor Oscilloscope

SDS6000L Series SDS5000X Series

SDS6208L (2 GHz) SDS6204L (2 GHz) SDS5104X (1 GHz)

SDS6108L (1 GHz) SDS6104L (1 GHz) SDS5054X (500 MHz)
SDS6058L (500 MHz) SDS6054L (500 MHz) SDS5034X (350 MHz)
Features and Benefits: Features and Benefits:
• 8/4 analog channels + 1 external trigger. Designed for expansion. Combine • 1 GHz, 500 MHz, 350 MHz models with real-time sample rate up to 5 GSa/s
multiple units for a high-speed acquisition system with up to 512 channels. • SPO technology
• Up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR) sample rate at each • Waveform capture rates up to 110,000 wfm/s (normal mode), and 500,000
channel wfm/s (sequence mode)
• Low background noise, supports 0.5 mV/div to 10 V/div vertical scales • Supports 256-level intensity grading and color temperature display modes
• SPO technology • Record length up to 250 Mpts/ch, 500 Mpts in total for all 4 channels
• Waveform capture rates up to 170,000 wfm/s (normal mode), and • Digital trigger system
750,000 wfm/s (sequence mode) • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
• Supports 256-level intensity grading and color temperature display modes Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
• 500 Mpts Record length in total for all 4 channels Trigger zone helps to simplify advanced triggering
• Digital trigger system • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B, SENT and Manchester
Pattern, Qualified, Nth edge, Setup / hold, Delay and Video (HDTV • Low background noise, supports 0.5 mV/div to 10 V/div voltage scales
supported). Zone Trigger simplifies advanced triggering • Segmented acquisition (Sequence) mode, dividing the maximum record
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, length into multiple segments (up to 100,000), according to trigger conditions
LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester set by the user, with a very small dead time between segments to capture the
• Segmented acquisition (Sequence) mode, dividing the maximum record qualifying event
length into multiple segments (up to 80,000), according to trigger conditions • History waveform record (History) function, the maximum recorded waveform
set by the user, with a very small dead time between segments to capture the length is 100,000 frames
qualifying event • Automatic measurement function on 50+ parameters, supports statistics
• History waveform record (History) function, the maximum recorded waveform with histogram,trend, Gating measurement, Math measurement, History
length is 80,000 frames measurement and Ref measurement
• Automatic measurements on 50+ parameters, supports statistics with • Math function (2 Mpts FFT, addition, subtraction, multiplication, division,
histogram, track, trend, Gating measurement, and measurements on Math, integration, differential, square root, etc.), supports formula editor
History, Memory and Ref Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
• 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division, Counter, Waveform Histogram, Bode plot and Power Analysis
integration, differential, square root, etc.), supports formula editor • High Speed hardware-based Average, ERES (Enhanced Resolution)
• Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, • High Speed hardware-based Mask Test function, with Mask Editor tool for
Counter, Waveform Histogram, Power Analysis and Eye/Jitter Analysis creating user-defined masks
• 16 digital channels (optional) • 16 digital channels (optional) with sample rate up to 1.25 GSa/s, record
• 25 MHz function / arbitrary waveform generator, built-in multiple predefined length up to 62.5 Mpts
waveforms • 25 MHz function / arbitrary waveform generator, built-in multiple predefined
• Interfaces include: 4x USB Hosts, USB Device (USBTMC), 1000M LAN (VXI- waveforms
11/ Telnet/ Socket), micro SD card, Pass/Fail, Trigger Out, HDMI, 10MHz In, • Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch
10MHz Out screen supports multi-touch gestures
• Built-in web server supports remote control over the LAN port using a web • Supports external mouse and keyboard
browser. Supports SCPI remote control commands. Supports external mouse • 10 types of one-button shortcuts
and keyboard • Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11, telnet,
socket, web), Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA output
• Built-in web server supports remote control by the LAN port using a web
browser
• Supports SCPI remote control commands

www.siglent.com 2
 Super Phosphor Oscilloscope

SDS3000X HD Series SDS2000X HD Series

SDS3104X HD (1 GHz) SDS2354X HD (350 MHz)

SDS3054X HD (500 MHz) SDS2204X HD (200 MHz)
SDS3034X HD (350 MHz) SDS2104X HD (100 MHz)

Features and Benefits: Features and Benefits:

• 4 analog channels, up to 1 GHz bandwidth with up to 4GSa/s sample rate • 12-bit High Resolution
• 12-bit ADC • 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
• Low background noise: 125 μVrms @ 1 GHz bandwidth • Front ends with 70 μVrms noise floor @ 500 MHz bandwidth and 0.5% DC
• SPO technology gain accuracy
• Waveform capture rates up to 200,000 wfm/s in Normal mode and 890,000 • 4 analog channels, up to 350 MHz bandwidth (upgradable to 500 MHz)
wfm/s in Sequence mode • SPO technology
• Supports 256-level intensity grading and color temperature display modes • Waveform capture rate up to 100,000 wfm/s (normal mode), and
• Up to 400 Mpts/ch record length 500,000 wfm/s (sequence mode)
• Digital trigger system • Supports 256-level intensity grading and color temperature display modes
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, • Up to 200 Mpts/ch record length
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). • Digital trigger system
Zone Trigger simplifies advanced triggering • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester and ARINC429 Zone Trigger simplifies advanced triggering
• Segmented acquisition (Sequence) mode, dividing the maximum record • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
length into multiple segments (up to 80,000), according to trigger conditions LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester
set by the user, with a very small dead time between segments to capture the • Segmented acquisition (Sequence) mode, dividing the maximum record
qualifying event length into multiple segments (up to 80,000), according to trigger conditions
• History waveform record (History) function, the maximum recorded waveform set by the user, with a very small dead time between segments to capture the
length is 80,000 frames qualifying event
• Automatic measurements on 50+ parameters, supports statistics with • History waveform record (History) function, the maximum recorded waveform
histogram, track, trend, Gating measurement, and measurements on Math, length is 80,000 frames
History and Memory traces • Automatic measurements on 50+ parameters, supports statistics with
• 4 Math traces (4 Mpts FFT, Filter, addition, subtraction, multiplication, division, histogram, track, trend, Gating measurement, and measurements on Math,
integration, differential, square root, etc.), supports formula editor History and Ref
• Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, • 2 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division,
Counter, Waveform Histogram, Bode plot and Power Analysis integration, differential, square root, etc.), supports formula editor
• High Speed hardware-based Average, ERES; High Speed hardware-based • Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
Mask Test function, with Mask Editor tool for creating user-defined masks Counter, Waveform Histogram, Bode plot and Power Analysis
• 16 digital channels (optional) • High Speed hardware-based Average, ERES; High Speed hardware-based
• External 50 MHz waveform generator (optional) Mask Test function, with Mask Editor tool for creating user-defined masks
• Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch • 16 digital channels (optional)
screen supports multi-touch gestures • Built-in 25 MHz waveform generator
• Interfaces include: 2x USB 3.0 Host, 1x USB 2.0 Host , USB 3.0 Device • Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch
(USBTMC), 1000M LAN ((VXI-11/Telnet/Socket/LXI)), External Triger In, Aux screen supports multi-touch gestures
Out (Pass/Fail, Trigger Out) • Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/
• Built-in web server supports remote control over the LAN port using a web Socket), Pass/Fail, Trigger Out
browser. Supports SCPI remote control commands. Supports external mouse • Built-in web server supports remote control over the LAN port using a web
and keyboard browser. Supports SCPI remote control commands. Supports external mouse
and keyboard

www.siglent.com 3
 Super Phosphor Oscilloscope

SDS2000X Plus Series SDS2000X-E Series

SDS2354X Plus (350 MHz) SDS2352X-E (350 MHz)

SDS2204X Plus (200 MHz) SDS2202X-E (200 MHz)
SDS2104X Plus / SDS2102X Plus (100 MHz)
Features and Benefits:
Features and Benefits: • Real-time sampling rate up to 2 GSa/s (1 GSa/s per channel, if both channels
• 350 MHz, 200 MHz, 100 MHz models with real-time sample rate up to 2 GSa/s. active)
A 500 MHz bandwidth upgrade option is available for 350 MHz models. • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time
• SPO technology out (Dropout), Pattern
• Waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 • Serial bus triggering and decoding (standard), supports protocols IIC, SPI,
wfm/s (sequence mode) UART, CAN, LIN
• Supports 256-level intensity grading and color temperature display modes • Video trigger, supports HDTV
• Record length up to 200 Mpts/ch, 400 Mpts in total for all 4 channels • Low background noise with voltage scales from 500 μV/div to 10 V/div
• Digital trigger system • 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors,
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
Pattern and Video (HDTV supported). Trigger zone helps to simplify advanced • Segmented acquisition (Sequence) mode, divides the maximum record length
triggering into multiple segments (up to 80,000), according to trigger conditions set by
• Serial bus triggering and decoder, supports I2C, SPI, UART, CAN, LIN the user, with a very small dead time segment to capture qualifying events
(Standard) and CAN FD, FlexRay, I2S, and MIL-STD-1553B, SENT and • History waveform record (history) function (maximum recorded waveform
Manchester (optional) protocols length is 80,000 frames)
• Low background noise, features 0.5 mV/div to 10 V/div voltage scales • Automatic measurement function for 38 parameters as well as Measurement
• 10-bit mode provides higher resolution and lower noise Statistics, Zoom, Gating, Math, History and Reference functions
• Segmented acquisition (Sequence) mode, dividing the maximum record • 1 Mpts FFT
length into multiple segments (up to 90,000), according to trigger conditions • Math and measurement functions use all sampled data points in memory (up
set by the user, with a very small dead time between segments to capture the to 28 Mpts)
qualifying event • Preset key can be customized for user settings or factory “defaults”
• History waveform record (History) function for up to 90,000 triggered • Security Erase mode
waveforms (frames) • High Speed hardware based Pass / Fail function
• Automatic measurement function on 50+ parameters, supports statistics with • Search and navigate
histogram and trend • Large 7 inch TFT -LCD display with 800 * 480 resolution
• Two Math traces, support 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, • Multiple interface types: USB Host, USB Device (USB -TMC), LAN, Pass / Fail,
and formula editor Trigger Out
• Abundant data processing and analysis functions such as Search, • Supports SCPI remote control commands
Navigate, Mask Test, Bode plot, Power Analysis (optional) and Counter • VXI-11+SCPI, Telnet (port 5024) +SCPI and Socket (port 5025) +SCPI
• 16 digital channels (optional) programming over LAN
• Built-in 50 MHz waveform generator (optional) • Supports web control and virtual instrument control panel for both PC and
• Large 10.1” TFT-LCD display with 1024x600 resolution; Capacitive touch mobile terminals
screen supports multi-touch gestures • Web control update rate of up-to 10 times/s provides nearly real-time update
• Multiple interfaces: USB Host, USB Device (USBTMC), LAN(VXI-11/Telnet/ rate
Socket), Pass/Fail, Trigger Out • Supports Multi-language display and embedded online help
• Built-in web server supports remote control by the LAN port using a web
browser; Supports SCPI remote control commands

www.siglent.com 4
 Super Phosphor Oscilloscope

SDS1000X HD Series SDS800X HD Series

SDS1204X HD / SDS1202X HD (200 MHz) SDS824X HD / SDS822X HD (200 MHz)

SDS1104X HD / SDS1102X HD (100 MHz) SDS814X HD / SDS812X HD (100 MHz)
SDS804X HD / SDS802X HD (70 MHz)
Features and Benefits:
• 12-bit High Resolution Features and Benefits:
• 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s • 12-bit High Resolution
• Front ends with 70 μVrms noise floor @ 200 MHz bandwidth • 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
• 2/4 analog channels, up to 200 MHz bandwidth • Front ends with 70 μVrms noise floor @ 200 MHz bandwidth
• SPO technology • 2/4 analog channels, up to 200 MHz bandwidth
• Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 • SPO technology
wfm/s (sequence mode) • Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000
• Supports 256-level intensity grading and color temperature display modes wfm/s (sequence mode)
• Up to 100 Mpts record length • Supports 256-level intensity grading and color temperature display modes
• Digital trigger system • Up to 100 Mpts record length
• Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, • Digital trigger system
Pattern, Video (HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold • Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout,
time. Pattern, Video (HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, time.
LIN, CAN FD(decode only), FlexRay(decode only) • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
• Segmented acquisition (Sequence) mode, dividing the maximum record LIN
length into multiple segments (up to 80,000), according to trigger conditions • Segmented acquisition (Sequence) mode, dividing the maximum record
set by the user, with a very small dead time between segments to capture the length into multiple segments (up to 80,000), according to trigger conditions
qualifying event set by the user, with a very small dead time between segments to capture the
• History waveform record (History) function, the maximum recorded waveform qualifying event
length is 80,000 frames • History waveform record (History) function, the maximum recorded waveform
• Automatic measurements on 50+ parameters, supports statistics with length is 80,000 frames
histogram, track, trend, Gating measurement, and measurements on Math, • Automatic measurements on 50+ parameters, supports statistics with
History and Ref histogram, track, trend, Gating measurement, and measurements on Math,
• 4 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division, History and Ref
integration, differential, square root, etc.), supports formula editor • 4 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division,
• Abundant data analysis functions such as Search, Navigate, Counter, Bode integration, differential, square root, etc.), supports formula editor
plot and Power Analysis • Abundant data analysis functions such as Search, Navigate, Counter, Bode
• High Speed hardware-based Mask Test function, with Mask Editor tool for plot and Power Analysis
creating user-defined masks • High Speed hardware-based Mask Test function, with Mask Editor tool for
• 16 digital channels (optional) creating user-defined masks
• 25 MHz waveform generator(optional) • 16 digital channels (optional)
• Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch • 25 MHz waveform generator(optional)
screen supports multi-touch gestures • 7” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen
• Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/ supports multi-touch gestures
Socket), Pass/Fail, Trigger Out • Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/
• Built-in web server supports remote control over the LAN port using a web Socket), Pass/Fail, Trigger Out
browser. Supports SCPI remote control commands. Supports external mouse • Built-in web server supports remote control over the LAN port using a web
and keyboard browser. Supports SCPI remote control commands. Supports external mouse
and keyboard. Supports NTP.

www.siglent.com 5
 Digital Storage Oscilloscope

SDS1000X-E Series SDS1000DL+ / SDS1000CML+ Series

SDS1152CML+ (150 MHz)
SDS1204X-E / SDS1202X-E (200 MHz)
SDS1102CML+ (100 MHz)
SDS1104X-E (100 MHz)
SDS1072CML+ (70 MHz)
SDS1052DL+ (50 MHz)
Features and Benefits:
• Two channel series have one 1 GSa/s ADC, four channel series have two 1
Features and Benefits
GSa/s ADCs. When all channels are enabled, each channel has a maximum
• 50 MHz, 70 MHz, 100 MHz, 150 MHz bandwidth models
sample rate of 500 MSa/s. When a single channel per ADC is active, it has
• Real-time sampling rate up to 1 GSa/s, Equivalent-time sampling rate up to
sampling rate of 1 GSa/s
50 GSa/s
• The newest generation of SPO technology
• Memory Depth up to 2 Mpts
• Waveform capture rate up to 100,000 wfm/s (normal mode), and
• Trigger types: Edge, Pulse, Video, Slope, Alternate
400,000 wfm/s (sequence mode)
• Waveform math functions:+, -, *, /, FFT
• Supports 256-level intensity grading and color display modes
• 6 digits frequency counter
• Record length up to 14 Mpts
• Supports Multi-language display and embedded online help
• Digital trigger system
• Screensaver from 1 minute to 5 hours
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time
• Digital filter and waveform recorder function
out (Dropout), Pattern
• 7 inch TFT-LCD display with 800 * 480 resolution
• Serial bus triggering and decoding (Standard), supports protocols IIC, SPI,
UART, RS232, CAN, LIN
• Segmented acquisition (Sequence) mode, divides the maximum record length
into multiple segments (up to 80,000), according to trigger conditions set by
the user, with a very small dead time segment to capture the qualifying event.
• 1 Mpts FFT
• Math and measurement functions use all sampled data points (up to 14 Mpts)
• MSO, 16 digital channels (four channel series only, optional)
• Search and navigate (four channel series only)
• USB AWG module (four channel series only, optional)
• Bode plot (four channel series only)

www.siglent.com 6
 Handheld Oscilloscope Arbitrary Waveform Generator

SDG7000A Series

SHS1000X/SHS800X Series SDG7102A (1 GHz)

SDG7052A (500 MHz)
SHS1202X (200 MHz) SDG7032A (350 MHz)
SHS1102X (100 MHz)
Features and Benefits
SHS820X (200 MHz) • Dual channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus
SHS810X (100 MHz) output
• High-performance sampling system with 5 GSa/s sample rate and 14 -bit
Features and Benefits vertical resolution
• 200 MHz, 100 MHz bandwidth models • 1 GHz maximum bandwidth
• Sample rate of 1 GSa/s (single-channel), Sample rate of 500 MSa/s (two- • Generates arbitrary waveform with sample rates of 0.01 Sa/s ~ 2.5 GSa/s,
channels) with maximum memory depth of 512 Mpts, and provides segment editing /
• The Siglent SPO technology playback functions
• Waveform capture rates up to 100,000 wfm/s (normal mode) and • Generates vector signals with up to 500 MS/s symbol rate
400,000 wfm/s (sequence mode) • Generates low jitter pulses with 1 ns minimum pulse width and 500 ps
• Supports 256-level intensity grading and color temperature display modes
minimum edge
• Record length up to 12 Mpts
• Up to 1 GHz bandwidth White Gaussian Noise and the bandwidth is adjustable
• Digital trigger system
• Supports PRBS up to 312.5 Mbps
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time
• The digital bus can output digital signals up to 1 Gbps.
out (Dropout), Pattern
• Supports analog/digital modulation, sweeping and bursting
• Serial bus triggering and decoding (Standard) for IIC, SPI, UART, CAN, and
• Enhanced dual channel operation functions: inter channel tracking, coupling
LIN protocols
and copying; Dual channel superposition function; Supports mutual
• Video trigger/HDTV
modulation between channels
• Low background noise with voltage scales from 2 mV/div to 100 V/div
• The 24 Vpp analog output is superimposed with ± 12 Vdc offset to provide a
• 3 one-button shortcuts for Oscilloscope, Multimeter and Recorder functions
maximum output range of ± 24 V (48 V)
• 8 one-button shortcuts for: Run/Stop, Auto Setup, Default, Measure, Cursors,
• High precision Frequency Counter
Display/Persist, Clear Sweep and Print. More function shortcuts available
• 5-inch capacitive touch screen with resolution of 800x480; Supports
when combined with the shift button
• Segmented acquisition (Sequence) mode, divides the maximum record length external mouse and keyboard operation; Supports WebServer to control the

into multiple segments (up to 80,000), according to trigger conditions set by instruments remotely
the user, with a very small dead time segment to capture the qualifying event • Supports multiple interfaces: 10 MHz In, 10 MHz Out, Trigger In/Out, Markers
• History waveform record (History) function (maximum recorded waveform etc
length is 80,000 frames) • Supports SCPI command for easy integration into test systems
• Automatic measurement function for 38 parameters as well as Measurement
Statistics, Zoom, Gating, Math, History and Reference functions
• 1 Mpts FFT. Support Peaks and Markers
• Math and measurement functions use all sampled data points (up to 12 Mpts)
• Math functions (FFT, addition, subtraction, multiplication, division, integration,
differential, square root)
• Default key can be customized for user settings or factory “defaults”
• Supports Multi-language display and embedded online help
• Security Erase mode
• Search and navigate function
• Includes Recorder mode, including Sample and Measurement Loggers
• 6000 counts Digital Multimeter, Support DCV, ACV, DCI, ACI, Resistance,
Diode, Capacitance, Continuity test.
• True RMS AC Voltage/Current measurement multimeter
• 5.6-inch TFT-LCD display with 640 * 480 resolution
• Interface types: Isolated USB Host, USB Device (MicroUSB -TMC)
• Supports SCPI remote control commands
• UL2054 certified lithium battery pack, 6900 mAh capacity, external charger
• IP Rating: IP51
• Compliance with UL61010-1, UL61010-2-030, UL61010-2-033
www.siglent.com 7
 Function/Arbitrary Waveform Generator

SDG6000X Series SDG2000X Series

SDG6052X (500 MHz) SDG2122X (120 MHz)

SDG6032X (350 MHz) SDG2082X (80 MHz)
SDG6022X (200 MHz) SDG2042X (40 MHz)

Features and Benefits Features and Benefits

• Innovative TrueArb and EasyPulse technology • Dual-channel, 120 MHz maximum bandwidth, 20 Vpp maximum output
• Dual-Channel, 500 MHz maximum bandwidth, 20 Vpp maximum output amplitude, high fidelity output with 80 dB dynamic range
amplitude, high fidelity output with 80 dB dynamic range • High-performance sampling system with 1.2 GSa/s sampling rate and 16-bit
• High-performance sampling system with 2.4 GSa/s sampling rate and 16-bit vertical resolution. No detail in your waveforms will be lost
vertical resolution • Innovative TrueArb technology, based on a point-by-point architecture,
• Multi-function signal generator, meeting requirements in wide range, supports any 8 pts~8 Mpts Arb waveform with a sampling rate in range of
Continuous Wave Generator, Pulse Generator, Function Arbitrary Waveform 1 μSa/s~75 MSa/s
Generator, IQ Signal Generator (optional), Noise Generator, PRBS Generator • Innovative EasyPulse technology, capable of generating lower jitter Square or
• Sweep and Burst function Pulse waveforms, brings a wide range and extremely high precision in pulse
• Harmonics function width and rise/fall time adjustments
• Waveform Combining function • Sweep and Burst function; Harmonics mode supported
• Channel Coupling, Copy and Tracking function • 4.3” touch screen display for easier operation
• 196 built-in arbitrary waveforms
• High precision Frequency Counter
• Standard interfaces include: USB Host, USB Device (USBTMC), LAN (VXI-11,
Socket, Telnet), GPIB (Optional)
• 4.3” touch screen display for easier operation

www.siglent.com 8
 Function/Arbitrary Waveform Generator Programmable Switching DC Power Supply

SPS5000X Series
SDG1000X Series
SPS5161X (160 V, 7.5 A) SPS5081X (80 V, 15 A)
SDG1062X (60 MHz) SPS5162X (160 V, 15 A) SPS5082X (80 V, 30 A)
SDG1032X (30 MHz) SPS5163X (160 V, 22.5 A) SPS5083X (80 V, 45 A)
Features and Benefits SPS5164X (160 V, 7.5 A) SPS5084X (80 V, 15 A)
• 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform SPS5165X (160 V, 7.5 A) SPS5085X (80 V, 15 A)
length SPS5051X (50 V, 10 A)
• Innovative TrueArb and EasyPulse technology SPS5041X (40 V, 30 A)
• Special circuit for Square wave function, can generate Square waves up to 60 SPS5042X (40 V, 60 A)
MHz with jitter less than 300 ps+0.05 ppm of period SPS5043X (40 V, 90 A)
• Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, SPS5044X (40 V, 30 A)
ASK, PSK and PWM, Sweep and Burst functions SPS5045X (40 V, 30 A)
• Waveform Combining function
• High precision Frequency Counter Features and Benefits
• Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11) • Rated Output Voltage: 40 V, 50 V, 80 V, 160 V
• Optional interface: GPIB • Rated Output Power: 180 W, 360 W, 720 W, 1080 W
• Wide range of output voltage and current, high efficiency power supply
• CV, CC priority mode selection, better protection of equipment under test
• Load transient recovery time (Load change from 50~100%) <1 ms
• Adjustable slew rate of output voltage and current
• Setting and readback resolution: 1 mV, 1 mA
• User enabled internal output discharge circuit to accelerate the down
programming of the output voltage
• Remote Voltage Sensing
• List function up to 50 steps; can be created from the front panel or by
importing list sequence files from a USB memory device
• External analog voltage and resistor control of voltage or current output
• External voltage and current monitoring output
• OVP, OCP, LPP, OTP protection.
• 2.4-inch OLED high brightness liquid crystal display, 170-degree viewing angle
• Standard Interface: USB, LAN, Analog Control Interface
• Optional Interface: USB-GPIB module
SDG800 Series • 1/2, 1/3, 1/6 rack mount size
• Embedded Web Server offers remote control through a web browser without
SDG830 (30 MHz) the need for the driver or software
SDG810 (10 MHz)

Features and Benefits

• Advanced DDS technology, 3.5 inch color TFT-LCD
• 125 MSa/s sampling rate,14 bit vertical resolution,16 Kpts max wave length
• 5 types of standard waveforms, built-in 46 types of arbitrary waveforms, sync
signal output, 1 μHz frequency resolution
• Complete modulation functions: AM,DSB-AM, FM, PM, FSK, ASK, PWM, linear/
logarithmic sweep and burst
• Innovative EasyPulse technology, can output pulse of low jitter, quick rising/
falling edge
• Support USB-TMC protocol and SCPI programming command control
• Arbitrary waveform edit software, provides lots of painting method, capable
of edit complicate waveform quickly and precisely

www.siglent.com 9
 Programmable Linear DC Power Supply Programmable Linear DC Power Supply

SPD3303X Series

SPD3303X-E (10 mv, 10 mA)

SPD3303X (1 mv, 1 mA)
SPD1000X Series
Features and Benefits
• 3 independent controlled and isolated outputs, 32 V/3.2 A×2,
SPD1168X (16 V/8 A)
2.5 V/3.3 V/5 V/3.2 A×1, total 220 W
SPD1305X (30 V/5 A)
• 5 digits Voltage, 4 digits Current Display, Minimum Resolution: 1 mV/1 mA
(SPD3303X) Features and Benefits
• Supports front panel timing output functions
• Single path high-precision programmable voltage output
• 4.3 inch true color TFT- LCD 480x272 display
16 V/8 A, total power up to 128 W
• 3 types of output modes: independent, series, parallel
30 V/5 A, total power up to 150 W
• 100 V/120 V/220 V/230 V compatible design to meet the needs of different
• Stable, reliable, Low ripple and noise：≤ 350 uVrms/3 mVpp; < 2 mArms
power grids • Fast transient response time: < 50 μs
• Intelligent temperature-controlled fan, effectively reducing noise
• 5 digit Voltage, 4 digit Current Display, Minimum Resolution: 1 mV/1 mA
• Clear graphical interface, with the waveform display function
• Supports front panel timing output functions
• Internal 5 groups of system parameter save/recall, supports data storage
• 2.8 inch true color TFT- LCD 240 *320 display
space expansion • 2 types of output modes：Two-wire output mode, 4-wire compensation output
• Provides PC software: Easypower, supports SCPI, LabView driver
mode, Maximum compensation voltage 1 V
• 100/120/220/230 V compatible design to meet the needs of different power
grids
• Intelligent temperature-controlled fan reduces noise
• Clear graphical interface, with the waveform display function
• Internal 5 groups of system parameter save/recall
• Includes PC software: Easypower, supports SCPI, LabView driver

SPD3303C Series

SPD3303C (10 mv,10 mA)

Features and Benefits

• 3 independent controlled and isolated output: 32 V/3.2 A×2, 2.5 V/3.3 V/
5 V/3.2 A×1, total power 220 W
• Resolution: 10 mV/10 mA
• Supports panel timing output functions
• LED display; 32 V full scale, 4 digits; 3.2 A full scale, 3 digits
• 100 V/120 V/220 V/230 V compatible design, to meet the needs of different
power grids
• Intelligent fan for temperature control, effectively reduces noise
• Five groups of internal system parameter storage. Supports data storage
space expansion
• Supports SCPI commands & USB device interface. Includes PC software

www.siglent.com 10
 Programmable DC Electronic Load Digital Multimeter

SDL1000X Series
SDM3065X Series
SDL1030X/X-E (300 W)
SDL1020X/X-E (200 W) SDM3065X
SDM3065X-SC (with Scanner Card)
Features and Benefits
Features and Benefits
• SDL1020X (Single channel ): DC 150 V/30 A, total power up to 200 W • 4.3” TFT-LCD, 480*272
• SDL1030X (Single channel ): DC 150 V/30 A, total power up to 300 W • Real 6½ digits readings resolution (2,200,000 counts)
• 4 static modes / Dynamic mode: CC/CV/CR/CP • 1Gb Nand flash size, Mass storage configuration files and data files
• CC Dynamic mode: Continuous, pulsed, toggled • True-RMS AC Voltage and AC Current measuring
• CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: • Supports double display, Chinese and English Menu
0.5 Hz • File management (support for U-disc and local storage)
• Measuring speed of voltage and current: up to 500 kHz • Built-in cold terminal compensation for thermocouple
• Adjustable current rise time range: 0.001 A/us~2.5 A/us • Comes with easy, converient and flexble any sensor measurement control
• Min. readback resolution: 0.1 mV, 0.1 mA software: EasyDMM
• Short-circuit, Battery test, CR-LED mode, and factory test functions • Standard interfaces: USB Device, USB Host, LAN (Optional Accessories: USB-
• 4-wire SENSE compensation mode function GPIB Adapter)
• List function supports editing as many as 100 steps • Scanner Card SC1016 (Only for SDM3065X-SC)
• Program function supports 50 groups of steps • Built-in Hlep system makes information acquisition easier
• OCP, OVP, OPP, OTP and LRV protection • Support remote control operation via SCPI commands. Compatible with
• External analog control commands of other main stream multimeters
• Voltage, Current monitoring via 0-10 V • Supports intelligent management system for laboratory based on BS
• 3.5 inch TFT-LCD display, capable of displaying multiple parameters and framework and LAN
states simultaneously
• Built-in RS232/USB/LAN communication interface, USB-GPIB module
(optional)
• Waveform trend chart and ease-to-use file storage and call functions
• Includes PC software: Supports SCPI, LabView driver

SDM3055 Series

SDM3055
SDM3055-SC (with Scanner Card)

Features and Benefits

• Real 5½ digits readings resolution ( 240, 000 counts )
• Up to 150 rdgs/s measurement speed
• True-RMS AC Voltage and AC Current measuring
• 1 Gb Nand flash size, Mass storage configuration files and data files
• Built-in cold terminal compensation for thermocouple temperature
measurements
• With easy, convenient and flexible PC software: EasyDMM
standard interfaces: USB Host, LAN ( Optional Accessories USB-GPIB Adapter )
• Scanner Card SC1016 ( Only for SDM3055-SC )
• Support remote control operation via SCPI commands.Compatible with
commands of main stream multimeters
www.siglent.com 11
 Digital Multimeter Vector Network Analyzer

SDM3045X Series SNA5000A Series

SNA5032A (100 kHz~26.5 GHz)

SDM3045X SNA5022A (100 kHz~13.5 GHz)
SNA5014A (9 kHz~8.5 GHz)
Features and Benefits SNA5004A (9 kHz~4.5 GHz)
• Real 4½ digit (60000 counts) readings resolution
• Up to 150 rdgs/s measurement speed
SNA5012A (9 kHz~8.5 GHz)
• True-RMS AC Voltage and AC Current measuring
SNA5002A (9 kHz~4.5 GHz)
• 1 Gb NAND flash size, Mass storage configuration files and data files
• Built-in cold terminal compensation for thermocouple
Features and Benefits:
• Frequency range: 9 kHz~8.5 GHz and 100 kHz~26.5 GHz
• With easy, convenient and flexible PC software: EasyDMM
• Frequency resolution: 1 Hz
• Standard interface: USB Device, USB Host, LAN (Optioanal Accessories:
• Level resolution: 0.05 dB
USB-GPIB Adapter)
• Range of IFBW: 10 Hz~3 MHz
• USB & LAN remote interfaces support common SCPI command set.
• Setting range of output level: -55 dBm ~ +10 dBm
Compatible with other popular DMMs on the market
• Dynamic range: 125 dB
• Types of calibration: Response calibration, Enhanced Response calibration,
Full-one portcalibration, Full-two port calibration, Full-three port calibration,
Full-four port calibration, TRL calibration
• Types of measurement: Scattering-parameter measurement,
differential-parameter measurement,receiver measurement, time-domain
parameter analysis, limit test, ripple test, impedance conversion, fixture
simulation, adapter removal/insertion, enhanced time-domain parameter
analysis (TDR), spectrum analysis, frequency offset, scalar mixer measurement
• Support Bias-Tees
• Interface: LAN, USB Device, USB Host(USB-GPIB)
• Remote control: SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket/Telnet/
WebServer
• 12.1-inch touch screen
• Video output: HDMI

www.siglent.com 12
 Portable Vector Network Analyzer Switch Matrix

SHN900A Series SSM5000A Series

SHN926A (30 kHz~26.5 GHz) SSM5342A (100 kHz~26.5 GHz)

SHN920A (30 kHz~20 GHz) SSM5321A (100 kHz~26.5 GHz)
SHN914A (30 kHz~14 GHz) SSM5144A (9 kHz~9 GHz)
SSM5142A (9 kHz~9 GHz)
Features and Benefits: SSM5124A (9 kHz~9 GHz)
• Standard VNA and CAT mode, optional SA mode SSM5122A (9 kHz~9 GHz)
• Frequency range: 30 kHz - 26.5 GHz
• Frequency resolution: 1 Hz
• Level resolution: 0.05 dB
Features and Benefits:
• Range of IFBW: 10 Hz~3 MHz • Characteristic impedance: 50 Ω
• Setting range of output level: -45 dBm ~ +10 dBm • Highest frequency: 9 GHz (or 26.5 GHz)
• Dynamic range: 110 dB(Typ.) • Maximum number of input ports: 4
• Types of calibration: Response calibration, Enhanced Response calibration, • Maximum number of output ports: 24
Full-one port calibration, Full-two port calibration, TRL calibration • RF connector: 3.5 mm female
• Types of measurement: Scattering-parameter measurement, differential- • Maximum input power: 20 dBm
parameter measurement, receiver measurement, time-domain parameter • Maximum input DC voltage: 35 V
analysis, limit test, ripple test, impedance conversion, fixture simulation, • Interface: LAN, USB Device, Direct Control (in), Direct Control (out) Screen
adapter removal/insertion, spectrum analysis frequency offset, scalar mixer size: 2.4-inch
measurement, pulse measurement
• Internal Bias-Tee connections
• Support GPS, Time and Location Information Saving
• Interface: LAN, USB Device, USB Host (USB-GPIB)
• Remote control: SCPI/ Labview/ IVI based on USB-TMC / VXI-11 / Socket /
Telnet / WebServer
• 8.4-inch touch screen, Mouse, Keyboard
• Typical working time 4 hours, 3.2 kg net weight

www.siglent.com 13
 Mechanical Switch Spectrum Analyzer

SSU5000A Series SSA5000A Series

SSU5504A (DC~50 GHz) SSA5085A (9 kHz~26.5 GHz)
SSU5503A (DC~50 GHz) SSA5083A (9 kHz~13.6 GHz)
SSU5502A (DC~50 GHz)
SSU5501A (DC~50 GHz) Features and Benefits:
SSU5266A (DC~26.5 GHz) • Spectrum Analyzer Frequency Range from 9 kHz up to 13.6 GHz/26.5 GHz
SSU5265A (DC~26.5 GHz) • -165 dBm/Hz Displayed Average Noise Level (Typ.)
• -105 dBc/Hz@1 GHz,10 kHz offset SSB Phase Noise (Typ.)
SSU5264A (DC~26.5 GHz)
• 25 MHz/40 MHz Analysis Bandwidth
SSU5263A (DC~26.5 GHz)
• 100% POI 7.20 μs, Dynamic Range 60 dB, Multi-view for Density, Spectrogram
SSU5262A (DC~26.5 GHz)
and PvT
SSU5261A (DC~26.5 GHz) • Channel power, ACPR, OBW, Harmonic, TOI measurement etc.
SSU5184A (DC~18 GHz) • Analog Modulation Analysis and Vector Digital Modulation Analysis
SSU5183A (DC~18 GHz) • 12.1 inch Multi-Touch Screen, HDMI output
SSU5182A (DC~18 GHz) • Web Browser Remote Control on PC and Mobile Terminals and File Operation
SSU5181A (DC~18 GHz)

Features and Benefits:

• Maximum frequency: 18 GHz/ 26.5 GHz/ 50 GHz
• 1 to 4 SPDT switches or 1 to 2 SP6T switch configurations
• SCPI Controllable via VISA and EasySSU software
• USB Connectivity
• Size: WxHxD=153x62.4x137.5 mm
• RF connector: SMA female or 2.4 mm female

www.siglent.com 14
 Spectrum Analyzer Real-Time Spectrum Analyzer

SSA3000X Plus Series SSA3000X-R Series

SSA3075X Plus (9 kHz~7.5 GHz) SSA3075X-R (9 kHz~7.5 GHz)

SSA3032X Plus (9 kHz~3.2 GHz) SSA3050X-R (9 kHz~5.0 GHz)
SSA3021X Plus (9 kHz~2.1 GHz) SSA3032X-R (9 kHz~3.2 GHz)
SSA3015X Plus (9 kHz~1.5 GHz)
Features and Benefits:
Features and Benefits: • -165 dBm/Hz Displayed Average Noise Level (Typ.)
• -165 dBm/Hz Displayed Average Noise Level (Typ.) • -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
• -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.) • Level Measurement Uncertainty < 0.7 dB (Typ.)
• Level Measurement Uncertainty < 0.7 dB (Typ.) • 1 Hz Minimum Resolution Bandwidth (RBW)
• 1 Hz Minimum Resolution Bandwidth (RBW) • Preamplifier Standard
• Preamplifier Standard • Tracking Generator Standard
• Tracking Generator • Up to 40 MHz Real Time Analysis Bandwidth
• Analog and Digital Signal Modulation Analysis Mode (Opt.) • 100% POI 7.20 μs, Dynamic Range 60 dB
• EMI Filter and Quasi-Peak Detector Kit(Opt.) • Multi-view for Density, Spectrogram, PvT, and multi trigger and FMT
• 10.1 lnch Multi-Touch Screen , Mouse and Keyboard supported • Modulation Analysis up to 40 MHz BW (Opt.)
• Web Browser Remote Control on PC and Mobile Terminals and File Operation • EMI Filter and Quasi-Peak Detector Kit(Opt.)
• 10.1 inch Multi-Touch Screen , Mouse and Keyboard supported
• Web Browser Remote Control on PC and Mobile Terminals and File Operation

SSA3000X Series

SSA3032X (9 kHz~3.2 GHz)

SSA3021X (9 kHz~2.1 GHz)

Features and Benefits:

• -161 dBm/Hz Displayed Average Noise Level (Typ.)
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
• Total Amplitude Accuracy < 0.7 dB
• 1 Hz Minimum Resolution Bandwidth (RBW)
• Preamplifier Standard
• Up to 3.2 GHz Tracking Generator (Standard)
• Reflection Measurement Kit (Opt.)
• Advanced Measurement Kit (Opt.)
• EMI Pre-compliance Measurements Kit (Opt.)
• 10.1 lnch WVGA (1024x600) Display

www.siglent.com 15
 Portable Spectrum Analyzer Spectrum & Vector Network Analyzer

SHA850A Series SVA1000X Series

SHA852A (9 kHz~7.5 GHz) SVA1075X (9 kHz~7.5 GHz)

SHA851A (9 kHz~3.6 GHz) SVA1032X (9 kHz~3.2 GHz)
SVA1015X (9 kHz~1.5 GHz)
Features and Benefits:
• Spectrum Analyzer Frequency Range from 9 kHz up to 7.5 GHz, -165 dBm/ Features and Benefits:
Hz Displayed Average Noise Level (Typ.), -104 dBc/Hz.@10 kHz Offset Phase • Vector Network Analyzer Frequency Range from 100 kHz up to 7.5 GHz
Noise (1 GHz, Typ.), 1 Hz up to 10 MHz Minimum Resolution Bandwidth (RBW), • -165 dBm/Hz Displayed Average Noise Level (Typ.)
Preamplifier and independent signal source up to 7.5 GHz, GPS positioning and • -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
logging • Level Measurement Uncertainty < 0.7 dB (Typ.)
• Cable and Antenna Test Frequency Range from 100 kHz up to 7.5 GHz, • 1 Hz Minimum Resolution Bandwidth (RBW)
Distance To Fault and Time Domain Analysis • Preamplifier Standard
• Vector Network Analyzer, Bias out up to 32VDC • Tracking Generator Standard
• Typical working time 4 hours, 3.2 kg net weight, 8.4 lnch Multi-Touch Screen , • Distance To Fault (Opt.)
Mouse and Keyboard supported • Analog and Digital Signal Modulation Analysis Mode (Opt.)
• EMI Filter and Quasi-Peak Detector Kit(Opt.)
• Advanced Measurement Kit (Opt.)
• 10.1 lnch Multi-Touch Screen , Mouse and Keyboard supported
• Web Browser Remote Control on PC and Mobile Terminals and File Operation

www.siglent.com 16
 RF Signal Generator RF Signal Generator

SSG6000A Series

SSG6087A (CW MODE 100 kHz ~ 40 GHz) SSG5000X Series

SSG6085A (CW MODE 100 kHz ~ 20 GHz)
SSG6083A (CW MODE 100 kHz ~ 13.6 GHz) SSG5060X (CW MODE 9 kHz ~ 6 GHz)
Features and Benefits SSG5040X (CW MODE 9 kHz ~ 4 GHz)
• Frequency up to 13.6 GHz/ 20 GHz/ 40GHz SSG5060X-V (CW MODE 9 kHz ~ 6 GHz /
• 0.01 Hz frequency setting resolution IQ MODE 10 MHz ~ 6 GHz)
• Level setting range: -130 dBm ~ 24 dBm SSG5040X-V (CW MODE 9 kHz ~ 4 GHz /
• Phase Noise: -135 dBc / Hz @ 1 GHz, 20 kHz offset (typ.) IQ MODE 10 MHz ~ 4 GHz)
• Level error ≤ 0.7 dB (typ.)
• Provides AM analog modulation with internal, external or Int+Ext source Features and Benefits
• Single pulse, double pulse and pulse train generator (option) • Frequency up to 4 GHz/6 GHz
• The power meter control kit can easily use the power meter to measure • 0.001 Hz frequency setting resolution
power, control power output and correct line loss 5 inch TFT capacitive • High output power up to +26 dBm (typ.)
touch screen, mouse and keyboard supported • Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
• Web browser remote control on PC and mobile terminals • User flatness correction with power sensor to correct the cable loss
• Standard interface includes USB Host, USB Device (USB TMC), LAN (VXI-11, • Provides AM, FM, PM analog modulation with internal, external or Int+Ext
Socket, Telnet). Optional interface: GPIB source
• Standard OCXO and step attenuator (0 to 110 dB, 10 dB step) • Single pulse, double pulse and Pulse train generator (option)
• Internal IQ modulation with 150 MHz modulation bandwidth with perfect in-
factory calibration
• Internal include some digital communication stand file such as 5G-NR, LTE,
WCDMA, WLAN, and playback them
• Internal Custom mode generate common IQ signal such as QAM, FSK, ASK,
MSK
• Analog differential I/Q outputs
• External analog I/Q input
• USB-power meter measurement
• 5inch TFT capacitive touch screen, mouse and keyboard supported
• Web browser remote control on PC and mobile terminals
• Standard interface included USB Host, USB Device (USB TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB
SSG5000A Series

SSG5085A (CW MODE 9 kHz ~ 20 GHz)

SSG5083A (CW MODE 9 kHz ~ 13.6 GHz)

Features and Benefits

• Frequency up to 13.6 GHz / 20 GHz
• 0.001 Hz frequency setting resolution
• Level setting range: -130 dBm ~ 25 dBm
• Phase Noise: -120 dBc / Hz @ 1 GHz, 20 kHz offset (typ.)
• Level error ≤ 0.7 dB (typ.)
• Provides AM, FM, PM analog modulation with internal, external or Int+Ext
source
• Single pulse, double pulse and pulse train generator (option)
• The power meter control kit can easily use the power meter to measure
power, control power output and correct line loss
• 5 inch TFT capacitive touch screen, mouse and keyboard supported
• Web browser remote control on PC and mobile terminals
• Standard interface includes USB Host, USB Device (USB TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB

www.siglent.com 17
 RF Signal Generator

SSG3000X Series

SSG3032X (CW MODE 9 kHz~3.2 GHz)

SSG3021X (CW MODE 9 kHz~2.1 GHz)
SSG3032X-IQE (IQ MODE 10 MHz~3.2 GHz)
SSG3021X-IQE (IQ MODE 10 MHz~2.1 GHz)

Features and Benefits

• 0.01 Hz frequency setting resolution
• Level output from -110 dBm to +13 dBm
• Maximum level up to +20 dBm (typ.)
• Phase Noise: -110 dBc/ Hz @ 1 GHz , 20 kHz offset (typ.)
• Level accuracy ≤0.7 dB (typ.)
• Provides AM, FM, &PM analog modulation with internal, external or Int+Ext
source
• Pulse modulation, on/off ratio ≥70 dBc
• Pulse train generator (option)
• External IQ modulation with SDG6000X as the baseband IQ signal
• USB-power meter measurement
• 5 inch TFT capacitive touch screen, mouse and keyboard supported
• Web browser remote control on PC and mobile terminals
• Standard interface include USB Host, USB Device (USB TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB

www.siglent.com 18
Probes and Accessories

Type Model Picture Specifications

PB470, 70 MHz bandwidth

PB470
PP510, 100 MHz bandwidth
PP510
PP215, 200 MHz bandwidth
PP215
1 X/10 X decay, 1 M/10 Mohm, 300 V/600 V
Passive Probe

10X CAT II 1000 V, CAT III 600 V, 250 MHz-bandwidth, SHS1000 handheld
PB925
oscilloscope option

SAP1000 Active Probe, 1 GHz

SAP2500 Active Probe, 2.5 GHz

Active Probe

SAP2500D Differential Active Probe, 2.5 GHz

SAP5000D Differential Active Probe, 5 GHz

Bandwidth: DC-600 kHz ; Current Range: L (50 mA~10 A Peak),

H(1 A~100 A Peak); Attenuation accuracy L (0.1 V/A), H (0.01 V/A); Typical
CPL5100 DC precision: L (3%±50 mA), H(500 mA~40 A Peak : 4%±50 mA; 4 0A~100
A Peak : ±15% Maximum); Rise Time: ≤583 ns; Operating voltage RMS:
CATI 600 V CATII 600 V CATIII 300 V; 9 V alkaline layer-built battery/ 15H

Bandwidth: 100 kHz; Maximum continuous current 20 Arms; Peak current 60

A; Switching ratio: 50 m /A; 5 mV/A;
CP4020
DC measurement accuracy: 50 mV/A (0.4 A-10 ApK) ± 2%; 5 mV/A
(1 A-60 ApK)±2%; 9 V battery-powered

Bandwidth: 1 MHz; Maximum continuous current 50 Arms;

Peak current 140 A; Switching ratio: 500 mV/A; 50 mV/A;
Current Probe CP4050 DC measurement accuracy: 500 mV/A (20 mA-14 ApK) ±3%±20 mA;
50 mV/A (200 mA-100 ApK )±4%± 200 mA;
50 mV/A (100 A-140 ApK)±15% max; 9 V battery-powered

Bandwidth: 150 KHz; Maximum continuous current 70 Arms; Peak current

200 A; Switching ratio: 50 mV/A; 5 mV/A;
CP4070
DC measurement accuracy: 50 mV/A(0.4A-10ApK)±2%; 5 mV/A
(1 A-200 ApK)±2%; 9 V battery-powered

Bandwidth: 300 kHz; Maximum continuous current 70 Arms; Peak current

200 A;Switching ratio：100 mV/A;10 mV/A;
CP4070A DC measurement accuracy：100 mV/A (50 mA-10 ApK) ±3%±50 mA;
10 mV/A (500 mA-40 ApK) ±4%±50 mA;
10 mV/A (40 A-200 ApK) ±15% max; 9 V battery-powered

www.siglent.com 19
 Type Model Picture Specifications

Frequency is determined by oscilloscope. Isolated USB function/arbitrary

USB AWG
SAG1021I waveform generator, 125 Msa/s, 16 kpts Arb Wave Length, Insulation Voltage,
Module
±42 Vpk(Hardware)

BAG-H2 Soft Carry Case for SHA850A, SHN900A

Soft Carry Case for SDS1000DL+/CML+, SDS1000X, SDS1000X-E, SDS2000X-E

Carry Bag BAG-S1
Series

Soft Carry Case for SDS2000X, SDS2000X Plus, SDS2000X HD, SDS5000X,
BAG-S2
SSA3000X, SSA3000X Plus, SVA1000X, SSA3000X-R

Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;

Switching ratio: 5 A/30 A;
SCP5030
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered by oscilloscope via
SAPBUS

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50

A; Switching ratio: 5 A/30 A;
SCP5030A
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered by oscilloscope via
SAPBUS

Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current

300 A; Switching ratio: 30 A/150 A;
SCP5150
Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Powered by oscilloscope
via SAPBUS

Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750
A; Switching ratio: 75 A/500 A;
SCP5500
Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Powered by oscilloscope
via SAPBUS
Current Probe
Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A;
CP6030
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50

A; Switching ratio: 5 A/30 A;
CP6030A
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter

Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current

300 A; Switching ratio: 30 A/150 A;
CP6150
Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

Bandwidth: 5 MHz; Maximum continuous current 500 Arms; Peak current 750
A; Switching ratio: 75 A/500 A;
CP6500
Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

www.siglent.com 20
Type Model Picture Specifications

Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;

Switching ratio: 5 A/30 A;
CP6030
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50

A; Switching ratio: 5 A/30 A;
CP6030A
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter
Current Probe
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current
300 A; Switching ratio: 30 A/150 A;
CP6150
Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

Bandwidth: 5 MHz; Maximum continuous current 500 Arms; Peak current 750
A; Switching ratio: 75 A/500 A;
CP6500
Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

Bandwidth: 50 MHz; Rise Time ≤7 ns; DC Accuracy ±2%; Max Input: 600 V
CATIII, 1000 V CATII; Max Differential Test Voltage (DC + Peak AC): 50 X:
DPB1300
±130 V, 500 X: ±1300 V. Input impedance/capacitance: 5 MΩ/<4 pF(Single-
ended), 10 MΩ/< 2 pF(Two inputs); DC 12 V/1.2 A Power

Bandwidth: 50 MHz; Maximum input differential voltage 800 V (DC + Peak

DPB4080 AC); Range selection (attenuation ratio):10 X/100 X; Accuracy: ±1%;
Standard DC 9 V/1 A power adapter

Bandwidth: 70 MHz; Maximum input differential voltage 1500 V (DC +

DPB5150 Peak AC); Range selection (attenuation ratio): 50 X/500 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter
High Voltage
Differential
Probe
Bandwidth: 100 MHz; Maximum input differential voltage 1500 V (DC +
DPB5150A Peak AC); Range selection (attenuation ratio): 50 X/500 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter

Bandwidth: 70 MHz; Maximum input differential voltage 7000 V (DC + Peak

DPB5700 AC); Range selection (attenuation ratio): 100 X/1000 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter

Bandwidth: 100 MHz; Maximum input differential voltage 7000 V (DC + Peak
DPB5700A AC);Range selection (attenuation ratio): 100 X/1000 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter

High Voltage Bandwidth: 40 MHz; Maximum input differential voltage DC: 10 kV; AC(rms):
HPB4010
Probe 7 kV(sine); AC(Vpp): 20 kV(Pulse); attenuation ratio1: 1000; Accuracy: ≤3%

Logic Probe SPL2016 Logic Probe, 16-channel, 500 MSa/s

www.siglent.com 21
 Type Model Picture Specifications

MSO function hardware for SDS2000X-E oscilloscope, 16-channel, 500 MSa/s,

Logic Analyzer SLA1016
14 Mpts

Three magnetic field near-field probes and one electric field near field probe;
Near-Field Frequency range: 30 MHz~3 GHz; resolution 25 mm; distinguished within
SRF5030T
Probe 10 cm range of the magnetic field; for EMI radiation interference and the
intensity detector

Deskew Fixture DF2001A Deskew fixture for voltage and current probes

N-BNC-2L N-BNC cable, 2 GHz bandwidth

N-N-6L N-N cable, 6 GHz bandwidth

N-SMA-6L N-SMA cable, 6 GHz bandwidth

N-N-18L N(M)-N(M) cable, 18 GHz

N-SMA-18L N(M)-SMA(M) cable, 18 GHz

Cable SMA-SMA-18L SMA(M)-SMA(M) cable, 18 GHz

SMA-SMA-26L SMA(M)-SMA(M) cable, 26 GHz

SMAF-SMA-26L SMA(F)-SMA(M) cable, 26 GHz

2.92F-2.92F-40A 2.92 mm Female - 2.92 mm Female adaptor, 40 GHz

V26-N35MN35F-25IN NMD 3.5 mm male - NMD 3.5 mm female; 26.5 GHz; length 25''/635 mm

V26-N35FA35F-25IN NMD 3.5 mm female - APC 3.5 mm female; 26.5 GHz; length 25''/635 mm

www.siglent.com 22
Type Model Picture Specifications

GPIB USB-GPIB USB-GPIB Adapter, USB Device expanded into GPIB interface

Isolated Front USB 5V power supply, plug and play, the maximum input voltage 600Vp-p,
ISFE
End floating test. Work with oscilloscopes

STB Test board STB-3 For experimental teaching and product demos

FX-USB2 USB 2.0 test fixture

Test fixture FX-ETH 100Base-TX & 1000Base-T compliance test fixture

FX-AMETH 100Base-T1 & 1000Base-T1 compliance test fixture

Rackmount kit for two intruments ,SDG800, SDG1000X, SDG2000X,

SDG-2-RMK SDG5000,SDG6000X series generators and SDM digital multimeters;
Height 3U

Rackmount kit , compatible with the SDS800X HD, SDS1000X-E, SDS1000X-U,

SDS1X-E-RMK
SDS2000X-E model; Height 4U

Rackmount kit, compatible with SDG800, SDG1000X, SDG2000X, SDG5000,

SDG-RMK SDG6000X series generators and SDM digital multimeters, SDL1000X load;
Height 3U

Rack Mount

Rackmount kit , compatible with the SSA3000X, SSA3000X Plus, SVA1000X,

SSA-RMK
SSA3000X-R model; Height 6U

SSG-RMK Rack Mount kit; SSG3000X, SSG5000X, SSG5000A, SDG7000A; Height 3U

Rack Mount kit for SDS1000X HD, SDS2000X HD, SDS3000X HD; Height
SDS2000 HD-RMK
6U(exactly 260 mm)

www.siglent.com 23
 Type Model Picture Specifications

SPD3000-RMK Rackmount kit , compatible with the SPD3000X/X-E/D/S/C models, Height 4U

SPS5000X-RMK SPS5000X EIA Standard rack, Height 3U

Rackmount kit is designed for use with only one instrument, is compatible
SDS2000-RMK
with the SDS2000,SDS2000X, SDS2000X Plus series Oscilloscope; Height 6U

Rack Mount

SDS5000X-RMK Rack Mount kit for SDS5000X; Height 6U

SDS6000-RMK Rack Mount kit for SDS6000A, SNA5000A, SSA5000A; Height 7U

SSG6000A-RMK Rack Mount kit; SSG6000A; Height 2U

Mechanical Calibration Kit: Open (M), Short (M), Match (M,50), Through (F-F),
F503ME
4.5 GHz

F503FE Mechanical Calibration Kit: OSLT, DC - 4.5 GHz, N-Female connector

F504MS Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male connector

F504FS Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Female connector

F504TS Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male and Female connector

F505TS Mechanical Calibration Kit: OSLT, DC - 18 GHz, N-Male and Female connector
VNA Calibration
Kit
Mechanical Calibration Kit: OSLT, DC - 4.5 GHz, 3.5 mm SMA-Male
F603ME
connector

Mechanical Calibration Kit: Open (M), Short (M), Match (M,50), Through (F-F),
F603FE
4.5 GHz, SMA-type

Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5 mm SMA-Male

F604MS
connector

Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5 mm SMA-Female

F604FS
connector

Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5 mm-Male and Female

F604TS
connector

Mechanical Calibration Kit: OSLT, DC - 27 GHz, 3.5 mm-Male and Female

F604TY
connector

www.siglent.com 24
Type Model Picture Specifications

Y504MS Integrated Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male

VNA Calibration
Kit

Y504FS Integrated Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Female

Increase the voltage and current output capabilities to generators like the
SIGLENT SDG family.
Typical Input Impedance: 15 kΩ
Input:
+/- 6.5 V Vpp (Gain: X1)
+/- 1.3 V (Gain: X10)
Amplifier SPA1010
Gain: Switched 10 V/1 V and 10 V/10 V
Output Voltage: 25.4 Vpp
Output Current: 1.12 A
Slew Rate: ≥ 90 V/μs
Overshoot: ≤ 4%
Compatible with all SIGLENT SDG series generators

Synchronous
SYN64 64 synchronous module
Module

ANT-GPS1 GPS antenna, SMA(M), 100 cm

Directional Antenna Suit, N type,

ANT-DA11 antenna (10 MHz~200 MHz),
ANT-DA1 ANT-DA12 antenna (200 MHz~500 MHz),
ANT-DA13 antenna (500 MHz~8 GHz),
Amplifier handle 12dB@1GHz(typ.)

Contains amplifier handle and 10 MHz ~ 200 MHz antenna. Antenna gain
Antenna ANT-DA11 10 dB (typical value); SWR <1:1.9 (typical value); 50 Ω/N type, female;
polarization direction horizontal and vertical

Contains amplifier handle and 200 MHz ~ 500 MHz antenna. Antenna gain
ANT-DA12 10 dB (typical value); SWR <1:1.9 (typical value); 50 Ω/N type, female;
polarization direction horizontal and vertical

Contains amplifier handle and 500 MHz ~ 8 GHz antenna. Antenna gain 10 dB
ANT-DA13 (typical value); SWR <1:1.9 (typical value); 50 Ω/N type, female; polarization
direction horizontal and vertical

Board integrated with RF components like amplier, mixer, filter for vector
RF Test board SNA-TB01
network analyzer demonstration

www.siglent.com 25
 Type Model Picture Specifications

ADP-18 Adjustable differential TDR probe DC~18 GHz

ADP-26 Adjustable differential TDR probe DC~26.5 GHz

TDR Probe

ASP-18 Adjustable single-end TDR probe DC~18 GHz

ASP-26 Adjustable single-end TDR probe DC~26.5 GHz

SSM5122A 2 input ports, 12 output ports, 3.5 mm female, 9 kHz~9 GHz

SSM5124A 2 input ports, 24 output ports, 3.5 mm female, 9 kHz~9 GHz

SSM5142A 4 input ports, 12 output ports, 3.5 mm female, 9 kHz~9 GHz

Switch Matrix

SSM5144A 4 input ports, 24 output ports, 3.5 mm female, 9 kHz~9 GHz

SSM5321A 2 input ports, 6 output ports, 3.5 mm female, 100 kHz~26.5 GHz

SSM5342A 4 input ports, 12 output ports, 3.5 mm female, 100 kHz~26.5 GHz

SSA3000X Utility Kit for SSA3000X Series: N (M) -SMA (M) cable, N (M) -N (M) cable, N (M)
UKitSSA3X
Utility Kit -BNC (F) adaptor (2 pcs), N (M) -SMA (F) adaptor (2 pcs), 10 dB attenuator;

Rechargeable
10V8_BAT 10.8V, 74 Wh
lithium battery

AC-DC adapter 12V_AP_4A 12V, 4A

Reflection RB (1 MHz~2.5 GHz), N (M) -N (M) adaptor (2 pcs), for SSA3000X,

RB3X25
Bridge SSA3000X Plus series

A comprehensive PC-based software for general and standards-based signals

PC Software SigIQPro
creation, supporting Bluetooth, IoT, Custom OFDM, etc.

Noise Source
NSD28 Noise source driver, connect spectrum analyzer to noise source
Driver

www.siglent.com 26
Type Model Picture Specifications

SEM5002A 2 ports, 9 kHz~4.5 GHz, SMA female

SEM5012A 2 ports, 9 kHz~9 GHz, SMA female

SEM5022A 2 ports, 100 kHz~13.5 GHz, 3.5 mm female

SEM5032A 2 ports, 100 kHz~26.5 GHz, 3.5 mm female

VNA Calibration
Kit
SEM5004A 4 ports, 9 kHz~4.5 GHz, SMA female

SEM5014A 4 ports, 9 kHz~9 GHz, SMA female

SEM5024A 4 ports, 100 kHz~13.5 GHz, 3.5 mm female

SEM5034A 4 ports, 100 kHz~26.5 GHz, 3.5 mm female

SSU5181A DC~18 GHz, including one SPDT mechanical switch, SMA female

SSU5182A DC~18 GHz, including two SPDT mechanical switchs, SMA female

SSU5183A DC~18 GHz, including three SPDT mechanical switchs, SMA female

SSU5184A DC~18 GHz, including four SPDT mechanical switchs, SMA female

SSU5261A DC~26.5 GHz, including one SPDT mechanical switch, SMA female

SSU5262A DC~26.5 GHz, including two SPDT mechanical switchs, SMA female

SSU5263A DC~26.5 GHz, including three SPDT mechanical switchs, SMA female
Mechanical
Switch
SSU5264A DC~26.5 GHz, including four SPDT mechanical switchs, SMA female

SSU5265A DC~26.5 GHz, including one SP6T mechanical switch, SMA female

SSU5266A DC~26.5 GHz, including two SP6T mechanical switchs, SMA female

SSU5501A DC~50 GHz, including one SPDT mechanical switch, 2.4 mm female

SSU5502A DC~50 GHz, including two SPDT mechanical switchs, 2.4 mm female

SSU5503A DC~50 GHz, including three SPDT mechanical switchs, 2.4 mm female

SSU5504A DC~50 GHz, including four SPDT mechanical switchs, 2.4 mm female

www.siglent.com 27