Assembly, Installation, Adjustment &
Testing (AIAT) Prerequisites
Proprietary Notice:
This document and the information contained in it is proprietary and confidential information of Philips
Healthcare ("Philips") and may not be reproduced, copied in whole or in part, adapted, modified,
disclosed to others, or disseminated without the prior written permission of the Philips Legal
Department. Use of this document and the information contained in it is strictly reserved for current
Philips personnel and Philips customers who have a current and valid license from Philips for use by the
customer’s designated in-house service employee on equipment located at the customer’s designated
site. Use of this document by unauthorized persons is strictly prohibited. Report violation of these
requirements to the Philips Legal Department. This document must be returned to Philips when the
user is no longer licensed and in any event upon Philips’ first written request.
Copyright Notice:
© 2011 Koninklijke Philips Electronics N.V. All Rights Reserved.
Warranty Disclaimer Language:
Philips provides this DOCUMENT without warranty of any kind, implied or expressed, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Limitations of Liability Language:
Philips has taken care to ensure the accuracy of this document. However, Philips assumes no liability for
errors or omissions and reserves the right to make changes without further notice to any products
herein to improve reliability, function, or design. Philips may make improvements or changes in the
product(s) or program(s) described in this document at any time.
CSIP Level 0:
This document and the information contained in it is proprietary and confidential information of Philips
Healthcare ("Philips") and may not be reproduced, copied in whole or in part, adapted, modified,
disclosed to others, or disseminated without the prior written permission of the Philips Legal
Department. This document is intended to be (a.) used by customers and is licensed to them as part of
their Philips equipment purchase or (b.) used to meet regulatory commitments as required by the FDA
under 21 CFR 1020.30 (and any amendments to it) and other local regulatory requirements. Use of this
document by unauthorized persons is strictly prohibited.
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY.
ANY RELEASE OR DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
What Is Needed To Perform AIAT?
Modality: Surgery (iXR Mobile Surgery) PARTS DESK:
System: BV Pulsera 2.1 1-800-722-9377, Option 1
Select “Imaging Systems”
BV Pulsera 2.1 systems have all been upgraded to version 2.2. GCS HELPDESK
Please refer to BV Pulsera 2.2 for AIAT Documentation. 770-510-1132, Option 3
gcs.helpdesk@philips.com
Document available on InCenter – see AIAT Information tab for this system.
**If you experience any issues opening the document on InCenter, please contact the GCS Helpdesk
for assistance.
Contact Parts Desk to order the Document ID (12NC) referenced above in printed form.
Additional Tools (Necessary items are marked with an “X”):
Integrated Security Tool (IST)
This software may be required to access the equipment, and can be used to log in to InCenter.
Click here to download and install IST from InCenter
Click here for instructions on how to setup and register IST
IST Smartcard & Smartcard Reader
These tools are needed for access to certain systems. NOTE: If you already have a USB Smartcard or
Reader from Philips, you do not need to order a new one.
Contact Parts Desk to order part numbers listed below. Both the Smartcard and
Reader are needed. A purchase order must be provided at time of order.
Smartcard – TC059 Omnikey 6121 USB Smartcard Reader
Part #: 4522-210-42322 Part #: 4522-210-42312
IST Parallel Port Dongle
This tool is needed for access to certain systems. NOTE: If you already have a Parallel Port Dongle from
Philips, you do not need to order a new one.
Contact GCS Helpdesk and request a new “IST Parallel Port Dongle” – you will
need to provide a shipping address.
(The team will send the request to Global Customer Services for fulfillment.)
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY.
ANY RELEASE OR DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
CSIP Level 0
