Technical DatA
AGROTRON X 710 • X 720
Type X 710 X 720
Engine
Liquid cooled DEUTZ diesel engine Type TCD 2013 L06 4V
Cylinders / cubic capacity No. / cm3 6 / 7,146
Bore/stroke mm 108 / 130
Injection system DCR (DEUTZ Common-Rail) with 1,600 bar injection pressure and 6-hole-injectors
Rated power (2000 / 25 EC)* kW / hp 161 / 219 193 / 262
Max. power (2000 / 25 EC)* kW / hp 178 / 242 198 / 270
Max. power with DPC kW / hp 184 / 250 202 / 275
Electronic engine control (EMC) standard
Maximum torque Nm 961 1,052
Constant torque range rpm 1,100 - 1,600 1,300 - 1,650
Torque rise % 35 36
Constant power range rpm 1,800 - 2,300 1,750 - 2,350
Air intake On the A-strut, left hand top
Spec. fuel consumption g / kWh 211 209
Oil quantity/tank capacity l 28 / 425 (585 on request) 28 / 585
Cab
Comfort Cab version Integrated, sound-proofed safety cab, exhaust on the side of the strut
Suspension Air suspension and level control as standard
Noise level dB (A) 72.8
Equipment Sun blind, tinted windows, wiper/washer unit at front and rear, opening for implement
actuation, working headlamp at front and rear, interior lighting, Grammer mechanical
comfort seat (with air suspension on request) with seat belt
Heating system Hot-water heating with fan with 4 settings
Air conditioning Front and rear windows can be tilted, ventilation system with fan,
A / C system on request, tiltable glass roof on request
PowerCom S armrest standard
Display Non-glare information display with digital display showing vehicle speed,
speed of front / rear PTO, powershift stages,
operating hours, time, etc.
Electrical system
Voltage V 12
Three-phase alternator W/A 1,800 / 200
Starter V / kW 12 / 4
Battery V / Ah 12 / 180
AGROTRONIC-hD connections External signal transmitter, 7-pin
Chassis, brakes, steering
Front axle suspension 40 / 50 km / h upon request / standard standard / standard
Differential locks front / rear ASM Fully automatic control by speed, steering angle, individual wheel braking and slip
(100 % locking); can be deactivated
Service brake front / rear rear Automatic activation of the front drive / disc brake system, oil-immersed
Steering angle 52°
Turning circle with track for track 1,900 6.75 - 7.40
Printed in Germany
Steering hydraulics
Steering load sensing with separate pump 57 l / 185 bar
Steering system Hydrostatic with balanced steering cylinder
* without cooling fan
Technical DatA
AGROTRON X 710 • X 720
Type X 710 X 720
Hydraulic system
System Load Sensing
Oil reservoir separate
Pump flow rate l / min (bar) 120 (200)
Oil quantity l max. 45
Powerlift
AGROTRONIC-hD Draft control / position control / mix control / float / diagnosis / vibration damping / slip control
Category 3-point hitch, rear III, fast-action couplings with automatic lateral stabilisation
Lifting capacity, rear kp 10,500
Lifting capacity, front kp 5,000
Remote control of rear powerlift standard on mudguard, left and right
Front powerlift upon request.
Cat. 3-point hitch, front Cat II / upon request WKS fast-action couplings Cat III L
Remote valves
Quantity Series 4 electrohydraulic
Parallel operation standard
Functions Double-acting with floating position, can be coupled under pressure
Actuation with PowerComS for 1 + 2, joystick for 3 + 4
Flow rate / Flow time adjustable from 0 to 83 l / adjustable from 0 - 45 secs. or continuous flow
Power beyond direct connection standard
Transmission
No. of speeds with creeper speed F/R 40 / 40
Type ZF 7300
Vibration absorber / Turboclutch Hydrodamp torsion damper Turboclutch
Powershift 4-range powershift with APS
Powershuttle reversing transmission standard
Max. speed 40 / 50 km / h Adjustment with engine speed controller max. speed 40 or 50 km / h
Clutch Multi-plate clutch, oil-immersed
Speeds in km / h
at engine speed* creeper speed normal
Group L M H S L M H S
1 0.48 0.58 0.69 0.83 3.45 4.14 4.96 5.95
2 0.83 1.00 1.19 1.43 5.96 7.15 8.57 10.3
3 1.21 1.45 1.74 2.09 8.69 10.4 12.5 15.0
1.79 2.15 2.57 3.09 12.8 15.4 18.5 22.2
Printed in Germany
4
5 - - - - 20.0 24.0 28.9 34.6
6 - - - - 29.6 35.6 42.5 50.0
* with tyres 710 / 70 R42
Technical DatA
AGROTRON X 710 • X 720
a Wheel base
b Length
c Overall length with front
weight carrier and lower link
d Height to top of cab
b
c
Type X 710 X 720
Dimensions in mm with front tyres 600 / 65 R38, and rear tyres 650 / 85 R38
a Wheel base mm 3,095
b Length mm 5,268
c Overall length with front 5,399
mm
weight carrier and lower link
d Height to top of cab mm 3,270
Width across tyres mm 2,750
Ground clearance front / middle / rear mm 494 / 625 / 548
Weights in kg (40 km/h, Cab)
Unloaden weight 9,430 - 10,435
Pay load Front 6,500
Pay load Rear 10,000
Total permission weight 14,000
Front PTO upon request
Clutch Multi-plate clutch, oil-immersed
Actuation electro-hydraulic
Printed in Germany
Speed / Direction of rotation 1,000 (at engine speed 2,100 rpm), right
PTO profile 1 3/8“ 6 spline
Max. transferable power kw / hp 110 / 150 with permanent load
Technical DatA
AGROTRON X 710 • X 720
Type X 710 X 720
Rear PTO
Clutch Oil-immersed, modulating start-up
Actuation electro-hydraulic
PTO stub flange mounted
Profile options 1 3/8“ 6 spline shaft or 1 3/8“ 21-spline or 1 3/4“ 20-spline or 1 3/4“ 6 spline
Speed rpm 540 E / 1000
Remote control on rear fenders, left and right
Tyres, wheels track widths in mm
18.4 R30* 1,874 f
20.8 R42* 1,879 r
18.4 R34 1,874 f
20.8 R42 1,879 r
480 / 70 R34* 1,994 f
650 / 85 R38* 1,997 r
520 / 70 R30* 1,894 f
580 / 70 R42* 1,879 r
520 / 70 R30* 1,894 f
620 / 70 R42 1,879 r
520 / 70 R30* 1,894 f
650 / 65 R42* 1,879 r
520 / 70 R30* 1,894 f
710 / 70 R38* 1,879 r
520 / 70 R34 1,874 f
580 / 70R42 1,879 r
520 / 70 R34 1,874 f
620 / 70 R42 1,879 r
520 / 70 R34* 1,994 f
710 / 70 R42* 1,997 r
520 / 70 R38 1,974 f
650 / 85 R38 1,997 r
520 / 70 R38 1,974 f
710/ 70 R42 1,997 r
www.trio-bcom.de SDFL201-102 Leo 1107
600 / 65 R34 1,874 f
650 / 65 R42 1,879 r
600 / 70 R30 1,874 f
710 / 70 R38 1,997 r
600 / 65 R38 1,874 f
Printed in Germany
650 / 85 R38 1,997 r
600 / 65 R38 1,874 f
710 / 70 R42 1,997 r
* with inter-axle ratio = 1.2997. Available tyre combinations are given on the current valid price lists. Operation with dual wheels is possible at the front and
rear; observe the Motor Vehicle Construction and Use Regulations.
This printed material is designed for worldwide use. The illustrations it contains show both special equipment and incomplete standard equipment. The availability of some illustrated models, standard and special equipment can vary from country to country. Only the dealer‘s price
list stipulates whether such illustrated equipment is included as a standard feature or whether it is a special accessory. In addition the illustrated mounted implements and special accessories may not always comply with the respective statutory regulations. It is the responsibility
of the customer – after consultation with the dealer – to verify this, taking the operating instructions into account. All information and illustrations in this brochure are subject to change without notice; errors excepted. Furthermore all information contained in this brochure is
not binding and is subject to modifications of a technical and commercial nature or those resulting from statutory regulations. No claims whatsoever can be derived from these. Same Deutz-Fahr DEUTSCHLAND GmbH reserves the right to make any changes to the design and
technical construction and also the scope of standard equipment at any time and without prior notice. Order no.: 562-10-01
SAME DEUTZ-FAHR DEUTSCHLAND GmbH, D-89415 Lauingen, www.deutz-fahr.de EVOLVING AGRICULTURE.
